Mauro Carvalho Chehab a3b60209e7 [media] em28xx: fix oops at em28xx_dvb_bus_ctrl() ... em28xx is oopsing with some DVB devices: [10856.061884] general protection fault: 0000 [#1] SMP [10856.067041] Modules linked in: rc_hauppauge em28xx_rc xc5000 drxk em28xx_dvb dvb_core em28xx videobuf2_vmalloc videobuf2_memops videobuf2_core rc_pixelview_new tuner_xc2028 tuner cx8800 cx88xx tveeprom btcx_risc videobuf_dma_sg videobuf_core rc_core v4l2_common videodev ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_CHECKSUM be2iscsi iscsi_boot_sysfs iptable_mangle bnx2i cnic uio cxgb4i cxgb4 tun bridge cxgb3i cxgb3 stp ip6t_REJECT mdio libcxgbi nf_conntrack_ipv6 llc nf_defrag_ipv6 ib_iser rdma_cm ib_addr xt_conntrack iw_cm ib_cm ib_sa nf_conntrack ib_mad ib_core bnep bluetooth iscsi_tcp libiscsi_tcp ip6table_filter libiscsi ip6_tables scsi_transport_iscsi xfs libcrc32c snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm tg3 snd_page_alloc snd_timer [10856.139176] snd ptp iTCO_wdt soundcore pps_core iTCO_vendor_support lpc_ich mfd_core coretemp nfsd hp_wmi crc32c_intel microcode serio_raw rfkill sparse_keymap nfs_acl lockd sunrpc kvm_intel kvm uinput binfmt_misc firewire_ohci nouveau mxm_wmi i2c_algo_bit drm_kms_helper firewire_core crc_itu_t ttm drm i2c_core wmi [last unloaded: dib0070] [10856.168969] CPU 1 [10856.170799] Pid: 13606, comm: dvbv5-zap Not tainted 3.9.0-rc5+ #26 Hewlett-Packard HP Z400 Workstation/0AE4h [10856.181187] RIP: 0010:[<ffffffffa0459e47>] [<ffffffffa0459e47>] em28xx_write_regs_req+0x37/0x1c0 [em28xx] [10856.191028] RSP: 0018:ffff880118401a58 EFLAGS: 00010282 [10856.196533] RAX: 00020000012d0000 RBX: ffff88010804aec8 RCX: ffff880118401b14 [10856.203852] RDX: 0000000000000048 RSI: 0000000000000000 RDI: ffff88010804aec8 [10856.211174] RBP: ffff880118401ac8 R08: 0000000000000001 R09: 0000000000000000 [10856.218496] R10: 0000000000000000 R11: 0000000000000006 R12: 0000000000000048 [10856.226026] R13: ffff880118401b14 R14: ffff88011752b258 R15: ffff88011752b258 [10856.233352] FS: 00007f26636d2740(0000) GS:ffff88011fc20000(0000) knlGS:0000000000000000 [10856.241626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10856.247565] CR2: 00007f2663716e20 CR3: 00000000c7eb1000 CR4: 00000000000007e0 [10856.254889] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [10856.262215] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [10856.269542] Process dvbv5-zap (pid: 13606, threadinfo ffff880118400000, task ffff8800cd625d40) [10856.278340] Stack: [10856.280564] ffff88011ffe8de8 0000000000000002 0000000000000000 ffff88011ffe9b00 [10856.288191] ffff880118401b14 00ff88011ffe9b08 ffff880100000048 ffffffff8112a52a [10856.295893] 0000000000000001 ffff88010804aec8 0000000000000048 ffff880118401b14 [10856.303521] Call Trace: [10856.306182] [<ffffffff8112a52a>] ? __alloc_pages_nodemask+0x15a/0x960 [10856.312912] [<ffffffffa045a002>] em28xx_write_regs+0x32/0xa0 [em28xx] [10856.319638] [<ffffffffa045a221>] em28xx_write_reg+0x21/0x30 [em28xx] [10856.326279] [<ffffffffa045a2cc>] em28xx_gpio_set+0x9c/0x100 [em28xx] [10856.332919] [<ffffffffa045a3ac>] em28xx_set_mode+0x7c/0x80 [em28xx] [10856.339472] [<ffffffffa03ef032>] em28xx_dvb_bus_ctrl+0x32/0x40 [em28xx_dvb] This is caused by commit c7a45e5b4f, that added support for two I2C buses. A partial fix was applied at 3de09fbbfa, but it doesn't cover all cases, as the DVB core fills fe->dvb->priv with adapter->priv. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>		2013-04-28 12:39:41 -03:00
..
Kconfig	[media] em28xx: Add ISDB support for c3tech Digital duo	2013-03-19 15:13:50 -03:00
Makefile	[media] em28xx: move sensor code to a separate source code file em28xx-camera.c	2013-03-29 06:36:20 -03:00
em28xx-audio.c	[media] rename most media/video usb drivers to media/usb	2012-08-15 16:25:07 -03:00
em28xx-camera.c	[media] em28xx: add basic support for OmniVision OV2640 sensors	2013-03-29 06:42:03 -03:00
em28xx-cards.c	[media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0	2013-04-25 09:51:23 -03:00
em28xx-core.c	[media] em28xx: write output frame resolution to regs 0x34+0x35 for em25xx family bridges	2013-03-28 17:54:44 -03:00
em28xx-dvb.c	[media] em28xx: fix oops at em28xx_dvb_bus_ctrl()	2013-04-28 12:39:41 -03:00
em28xx-i2c.c	[media] em28xx: add support for em25xx i2c bus B read/write/check device operations	2013-03-28 17:37:45 -03:00
em28xx-input.c	[media] em28xx: Prepare to support 2 different I2C buses	2013-03-18 18:14:15 -03:00
em28xx-reg.h	[media] em28xx: write output frame resolution to regs 0x34+0x35 for em25xx family bridges	2013-03-28 17:54:44 -03:00
em28xx-vbi.c	[media] em28xx: convert to videobuf2	2013-01-05 01:03:38 -02:00
em28xx-video.c	[media] em28xx: Put remaining .vidioc_g_chip_info instance under ADV_DEBUG	2013-04-16 18:26:08 -03:00
em28xx.h	[media] em28xx: add basic support for OmniVision OV2640 sensors	2013-03-29 06:42:03 -03:00