868 lines
20 KiB
C
868 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI QSPI driver
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
|
|
* Author: Sourav Poddar <sourav.poddar@ti.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/omap-dma.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi-mem.h>
|
|
|
|
struct ti_qspi_regs {
|
|
u32 clkctrl;
|
|
};
|
|
|
|
struct ti_qspi {
|
|
struct completion transfer_complete;
|
|
|
|
/* list synchronization */
|
|
struct mutex list_lock;
|
|
|
|
struct spi_master *master;
|
|
void __iomem *base;
|
|
void __iomem *mmap_base;
|
|
size_t mmap_size;
|
|
struct regmap *ctrl_base;
|
|
unsigned int ctrl_reg;
|
|
struct clk *fclk;
|
|
struct device *dev;
|
|
|
|
struct ti_qspi_regs ctx_reg;
|
|
|
|
dma_addr_t mmap_phys_base;
|
|
dma_addr_t rx_bb_dma_addr;
|
|
void *rx_bb_addr;
|
|
struct dma_chan *rx_chan;
|
|
|
|
u32 spi_max_frequency;
|
|
u32 cmd;
|
|
u32 dc;
|
|
|
|
bool mmap_enabled;
|
|
int current_cs;
|
|
};
|
|
|
|
#define QSPI_PID (0x0)
|
|
#define QSPI_SYSCONFIG (0x10)
|
|
#define QSPI_SPI_CLOCK_CNTRL_REG (0x40)
|
|
#define QSPI_SPI_DC_REG (0x44)
|
|
#define QSPI_SPI_CMD_REG (0x48)
|
|
#define QSPI_SPI_STATUS_REG (0x4c)
|
|
#define QSPI_SPI_DATA_REG (0x50)
|
|
#define QSPI_SPI_SETUP_REG(n) ((0x54 + 4 * n))
|
|
#define QSPI_SPI_SWITCH_REG (0x64)
|
|
#define QSPI_SPI_DATA_REG_1 (0x68)
|
|
#define QSPI_SPI_DATA_REG_2 (0x6c)
|
|
#define QSPI_SPI_DATA_REG_3 (0x70)
|
|
|
|
#define QSPI_COMPLETION_TIMEOUT msecs_to_jiffies(2000)
|
|
|
|
#define QSPI_FCLK 192000000
|
|
|
|
/* Clock Control */
|
|
#define QSPI_CLK_EN (1 << 31)
|
|
#define QSPI_CLK_DIV_MAX 0xffff
|
|
|
|
/* Command */
|
|
#define QSPI_EN_CS(n) (n << 28)
|
|
#define QSPI_WLEN(n) ((n - 1) << 19)
|
|
#define QSPI_3_PIN (1 << 18)
|
|
#define QSPI_RD_SNGL (1 << 16)
|
|
#define QSPI_WR_SNGL (2 << 16)
|
|
#define QSPI_RD_DUAL (3 << 16)
|
|
#define QSPI_RD_QUAD (7 << 16)
|
|
#define QSPI_INVAL (4 << 16)
|
|
#define QSPI_FLEN(n) ((n - 1) << 0)
|
|
#define QSPI_WLEN_MAX_BITS 128
|
|
#define QSPI_WLEN_MAX_BYTES 16
|
|
#define QSPI_WLEN_MASK QSPI_WLEN(QSPI_WLEN_MAX_BITS)
|
|
|
|
/* STATUS REGISTER */
|
|
#define BUSY 0x01
|
|
#define WC 0x02
|
|
|
|
/* Device Control */
|
|
#define QSPI_DD(m, n) (m << (3 + n * 8))
|
|
#define QSPI_CKPHA(n) (1 << (2 + n * 8))
|
|
#define QSPI_CSPOL(n) (1 << (1 + n * 8))
|
|
#define QSPI_CKPOL(n) (1 << (n * 8))
|
|
|
|
#define QSPI_FRAME 4096
|
|
|
|
#define QSPI_AUTOSUSPEND_TIMEOUT 2000
|
|
|
|
#define MEM_CS_EN(n) ((n + 1) << 8)
|
|
#define MEM_CS_MASK (7 << 8)
|
|
|
|
#define MM_SWITCH 0x1
|
|
|
|
#define QSPI_SETUP_RD_NORMAL (0x0 << 12)
|
|
#define QSPI_SETUP_RD_DUAL (0x1 << 12)
|
|
#define QSPI_SETUP_RD_QUAD (0x3 << 12)
|
|
#define QSPI_SETUP_ADDR_SHIFT 8
|
|
#define QSPI_SETUP_DUMMY_SHIFT 10
|
|
|
|
#define QSPI_DMA_BUFFER_SIZE SZ_64K
|
|
|
|
static inline unsigned long ti_qspi_read(struct ti_qspi *qspi,
|
|
unsigned long reg)
|
|
{
|
|
return readl(qspi->base + reg);
|
|
}
|
|
|
|
static inline void ti_qspi_write(struct ti_qspi *qspi,
|
|
unsigned long val, unsigned long reg)
|
|
{
|
|
writel(val, qspi->base + reg);
|
|
}
|
|
|
|
static int ti_qspi_setup(struct spi_device *spi)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
|
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
|
int clk_div = 0, ret;
|
|
u32 clk_ctrl_reg, clk_rate, clk_mask;
|
|
|
|
if (spi->master->busy) {
|
|
dev_dbg(qspi->dev, "master busy doing other transfers\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (!qspi->spi_max_frequency) {
|
|
dev_err(qspi->dev, "spi max frequency not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clk_rate = clk_get_rate(qspi->fclk);
|
|
|
|
clk_div = DIV_ROUND_UP(clk_rate, qspi->spi_max_frequency) - 1;
|
|
|
|
if (clk_div < 0) {
|
|
dev_dbg(qspi->dev, "clock divider < 0, using /1 divider\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (clk_div > QSPI_CLK_DIV_MAX) {
|
|
dev_dbg(qspi->dev, "clock divider >%d , using /%d divider\n",
|
|
QSPI_CLK_DIV_MAX, QSPI_CLK_DIV_MAX + 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(qspi->dev, "hz: %d, clock divider %d\n",
|
|
qspi->spi_max_frequency, clk_div);
|
|
|
|
ret = pm_runtime_get_sync(qspi->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(qspi->dev);
|
|
dev_err(qspi->dev, "pm_runtime_get_sync() failed\n");
|
|
return ret;
|
|
}
|
|
|
|
clk_ctrl_reg = ti_qspi_read(qspi, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
|
|
clk_ctrl_reg &= ~QSPI_CLK_EN;
|
|
|
|
/* disable SCLK */
|
|
ti_qspi_write(qspi, clk_ctrl_reg, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
|
|
/* enable SCLK */
|
|
clk_mask = QSPI_CLK_EN | clk_div;
|
|
ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
ctx_reg->clkctrl = clk_mask;
|
|
|
|
pm_runtime_mark_last_busy(qspi->dev);
|
|
ret = pm_runtime_put_autosuspend(qspi->dev);
|
|
if (ret < 0) {
|
|
dev_err(qspi->dev, "pm_runtime_put_autosuspend() failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
|
|
{
|
|
struct ti_qspi_regs *ctx_reg = &qspi->ctx_reg;
|
|
|
|
ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
|
|
}
|
|
|
|
static inline u32 qspi_is_busy(struct ti_qspi *qspi)
|
|
{
|
|
u32 stat;
|
|
unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
|
|
|
|
stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
|
|
while ((stat & BUSY) && time_after(timeout, jiffies)) {
|
|
cpu_relax();
|
|
stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
|
|
}
|
|
|
|
WARN(stat & BUSY, "qspi busy\n");
|
|
return stat & BUSY;
|
|
}
|
|
|
|
static inline int ti_qspi_poll_wc(struct ti_qspi *qspi)
|
|
{
|
|
u32 stat;
|
|
unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
|
|
|
|
do {
|
|
stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
|
|
if (stat & WC)
|
|
return 0;
|
|
cpu_relax();
|
|
} while (time_after(timeout, jiffies));
|
|
|
|
stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
|
|
if (stat & WC)
|
|
return 0;
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t,
|
|
int count)
|
|
{
|
|
int wlen, xfer_len;
|
|
unsigned int cmd;
|
|
const u8 *txbuf;
|
|
u32 data;
|
|
|
|
txbuf = t->tx_buf;
|
|
cmd = qspi->cmd | QSPI_WR_SNGL;
|
|
wlen = t->bits_per_word >> 3; /* in bytes */
|
|
xfer_len = wlen;
|
|
|
|
while (count) {
|
|
if (qspi_is_busy(qspi))
|
|
return -EBUSY;
|
|
|
|
switch (wlen) {
|
|
case 1:
|
|
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
|
|
cmd, qspi->dc, *txbuf);
|
|
if (count >= QSPI_WLEN_MAX_BYTES) {
|
|
u32 *txp = (u32 *)txbuf;
|
|
|
|
data = cpu_to_be32(*txp++);
|
|
writel(data, qspi->base +
|
|
QSPI_SPI_DATA_REG_3);
|
|
data = cpu_to_be32(*txp++);
|
|
writel(data, qspi->base +
|
|
QSPI_SPI_DATA_REG_2);
|
|
data = cpu_to_be32(*txp++);
|
|
writel(data, qspi->base +
|
|
QSPI_SPI_DATA_REG_1);
|
|
data = cpu_to_be32(*txp++);
|
|
writel(data, qspi->base +
|
|
QSPI_SPI_DATA_REG);
|
|
xfer_len = QSPI_WLEN_MAX_BYTES;
|
|
cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS);
|
|
} else {
|
|
writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG);
|
|
cmd = qspi->cmd | QSPI_WR_SNGL;
|
|
xfer_len = wlen;
|
|
cmd |= QSPI_WLEN(wlen);
|
|
}
|
|
break;
|
|
case 2:
|
|
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n",
|
|
cmd, qspi->dc, *txbuf);
|
|
writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
|
|
break;
|
|
case 4:
|
|
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n",
|
|
cmd, qspi->dc, *txbuf);
|
|
writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
|
|
break;
|
|
}
|
|
|
|
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
|
|
if (ti_qspi_poll_wc(qspi)) {
|
|
dev_err(qspi->dev, "write timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
txbuf += xfer_len;
|
|
count -= xfer_len;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
|
|
int count)
|
|
{
|
|
int wlen;
|
|
unsigned int cmd;
|
|
u8 *rxbuf;
|
|
|
|
rxbuf = t->rx_buf;
|
|
cmd = qspi->cmd;
|
|
switch (t->rx_nbits) {
|
|
case SPI_NBITS_DUAL:
|
|
cmd |= QSPI_RD_DUAL;
|
|
break;
|
|
case SPI_NBITS_QUAD:
|
|
cmd |= QSPI_RD_QUAD;
|
|
break;
|
|
default:
|
|
cmd |= QSPI_RD_SNGL;
|
|
break;
|
|
}
|
|
wlen = t->bits_per_word >> 3; /* in bytes */
|
|
|
|
while (count) {
|
|
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
|
|
if (qspi_is_busy(qspi))
|
|
return -EBUSY;
|
|
|
|
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
|
|
if (ti_qspi_poll_wc(qspi)) {
|
|
dev_err(qspi->dev, "read timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
switch (wlen) {
|
|
case 1:
|
|
*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
|
|
break;
|
|
case 2:
|
|
*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
|
|
break;
|
|
case 4:
|
|
*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
|
|
break;
|
|
}
|
|
rxbuf += wlen;
|
|
count -= wlen;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t,
|
|
int count)
|
|
{
|
|
int ret;
|
|
|
|
if (t->tx_buf) {
|
|
ret = qspi_write_msg(qspi, t, count);
|
|
if (ret) {
|
|
dev_dbg(qspi->dev, "Error while writing\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (t->rx_buf) {
|
|
ret = qspi_read_msg(qspi, t, count);
|
|
if (ret) {
|
|
dev_dbg(qspi->dev, "Error while reading\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ti_qspi_dma_callback(void *param)
|
|
{
|
|
struct ti_qspi *qspi = param;
|
|
|
|
complete(&qspi->transfer_complete);
|
|
}
|
|
|
|
static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst,
|
|
dma_addr_t dma_src, size_t len)
|
|
{
|
|
struct dma_chan *chan = qspi->rx_chan;
|
|
dma_cookie_t cookie;
|
|
enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
|
|
struct dma_async_tx_descriptor *tx;
|
|
int ret;
|
|
|
|
tx = dmaengine_prep_dma_memcpy(chan, dma_dst, dma_src, len, flags);
|
|
if (!tx) {
|
|
dev_err(qspi->dev, "device_prep_dma_memcpy error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
tx->callback = ti_qspi_dma_callback;
|
|
tx->callback_param = qspi;
|
|
cookie = tx->tx_submit(tx);
|
|
reinit_completion(&qspi->transfer_complete);
|
|
|
|
ret = dma_submit_error(cookie);
|
|
if (ret) {
|
|
dev_err(qspi->dev, "dma_submit_error %d\n", cookie);
|
|
return -EIO;
|
|
}
|
|
|
|
dma_async_issue_pending(chan);
|
|
ret = wait_for_completion_timeout(&qspi->transfer_complete,
|
|
msecs_to_jiffies(len));
|
|
if (ret <= 0) {
|
|
dmaengine_terminate_sync(chan);
|
|
dev_err(qspi->dev, "DMA wait_for_completion_timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, loff_t offs,
|
|
void *to, size_t readsize)
|
|
{
|
|
dma_addr_t dma_src = qspi->mmap_phys_base + offs;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* Use bounce buffer as FS like jffs2, ubifs may pass
|
|
* buffers that does not belong to kernel lowmem region.
|
|
*/
|
|
while (readsize != 0) {
|
|
size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE,
|
|
readsize);
|
|
|
|
ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr,
|
|
dma_src, xfer_len);
|
|
if (ret != 0)
|
|
return ret;
|
|
memcpy(to, qspi->rx_bb_addr, xfer_len);
|
|
readsize -= xfer_len;
|
|
dma_src += xfer_len;
|
|
to += xfer_len;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg,
|
|
loff_t from)
|
|
{
|
|
struct scatterlist *sg;
|
|
dma_addr_t dma_src = qspi->mmap_phys_base + from;
|
|
dma_addr_t dma_dst;
|
|
int i, len, ret;
|
|
|
|
for_each_sg(rx_sg.sgl, sg, rx_sg.nents, i) {
|
|
dma_dst = sg_dma_address(sg);
|
|
len = sg_dma_len(sg);
|
|
ret = ti_qspi_dma_xfer(qspi, dma_dst, dma_src, len);
|
|
if (ret)
|
|
return ret;
|
|
dma_src += len;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ti_qspi_enable_memory_map(struct spi_device *spi)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
|
|
|
ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
|
|
if (qspi->ctrl_base) {
|
|
regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
|
|
MEM_CS_MASK,
|
|
MEM_CS_EN(spi->chip_select));
|
|
}
|
|
qspi->mmap_enabled = true;
|
|
qspi->current_cs = spi->chip_select;
|
|
}
|
|
|
|
static void ti_qspi_disable_memory_map(struct spi_device *spi)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
|
|
|
ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG);
|
|
if (qspi->ctrl_base)
|
|
regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
|
|
MEM_CS_MASK, 0);
|
|
qspi->mmap_enabled = false;
|
|
qspi->current_cs = -1;
|
|
}
|
|
|
|
static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode,
|
|
u8 data_nbits, u8 addr_width,
|
|
u8 dummy_bytes)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(spi->master);
|
|
u32 memval = opcode;
|
|
|
|
switch (data_nbits) {
|
|
case SPI_NBITS_QUAD:
|
|
memval |= QSPI_SETUP_RD_QUAD;
|
|
break;
|
|
case SPI_NBITS_DUAL:
|
|
memval |= QSPI_SETUP_RD_DUAL;
|
|
break;
|
|
default:
|
|
memval |= QSPI_SETUP_RD_NORMAL;
|
|
break;
|
|
}
|
|
memval |= ((addr_width - 1) << QSPI_SETUP_ADDR_SHIFT |
|
|
dummy_bytes << QSPI_SETUP_DUMMY_SHIFT);
|
|
ti_qspi_write(qspi, memval,
|
|
QSPI_SPI_SETUP_REG(spi->chip_select));
|
|
}
|
|
|
|
static int ti_qspi_exec_mem_op(struct spi_mem *mem,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(mem->spi->master);
|
|
u32 from = 0;
|
|
int ret = 0;
|
|
|
|
/* Only optimize read path. */
|
|
if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN ||
|
|
!op->addr.nbytes || op->addr.nbytes > 4)
|
|
return -ENOTSUPP;
|
|
|
|
/* Address exceeds MMIO window size, fall back to regular mode. */
|
|
from = op->addr.val;
|
|
if (from + op->data.nbytes > qspi->mmap_size)
|
|
return -ENOTSUPP;
|
|
|
|
mutex_lock(&qspi->list_lock);
|
|
|
|
if (!qspi->mmap_enabled || qspi->current_cs != mem->spi->chip_select)
|
|
ti_qspi_enable_memory_map(mem->spi);
|
|
ti_qspi_setup_mmap_read(mem->spi, op->cmd.opcode, op->data.buswidth,
|
|
op->addr.nbytes, op->dummy.nbytes);
|
|
|
|
if (qspi->rx_chan) {
|
|
struct sg_table sgt;
|
|
|
|
if (virt_addr_valid(op->data.buf.in) &&
|
|
!spi_controller_dma_map_mem_op_data(mem->spi->master, op,
|
|
&sgt)) {
|
|
ret = ti_qspi_dma_xfer_sg(qspi, sgt, from);
|
|
spi_controller_dma_unmap_mem_op_data(mem->spi->master,
|
|
op, &sgt);
|
|
} else {
|
|
ret = ti_qspi_dma_bounce_buffer(qspi, from,
|
|
op->data.buf.in,
|
|
op->data.nbytes);
|
|
}
|
|
} else {
|
|
memcpy_fromio(op->data.buf.in, qspi->mmap_base + from,
|
|
op->data.nbytes);
|
|
}
|
|
|
|
mutex_unlock(&qspi->list_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops ti_qspi_mem_ops = {
|
|
.exec_op = ti_qspi_exec_mem_op,
|
|
};
|
|
|
|
static int ti_qspi_start_transfer_one(struct spi_master *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct ti_qspi *qspi = spi_master_get_devdata(master);
|
|
struct spi_device *spi = m->spi;
|
|
struct spi_transfer *t;
|
|
int status = 0, ret;
|
|
unsigned int frame_len_words, transfer_len_words;
|
|
int wlen;
|
|
|
|
/* setup device control reg */
|
|
qspi->dc = 0;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
qspi->dc |= QSPI_CKPHA(spi->chip_select);
|
|
if (spi->mode & SPI_CPOL)
|
|
qspi->dc |= QSPI_CKPOL(spi->chip_select);
|
|
if (spi->mode & SPI_CS_HIGH)
|
|
qspi->dc |= QSPI_CSPOL(spi->chip_select);
|
|
|
|
frame_len_words = 0;
|
|
list_for_each_entry(t, &m->transfers, transfer_list)
|
|
frame_len_words += t->len / (t->bits_per_word >> 3);
|
|
frame_len_words = min_t(unsigned int, frame_len_words, QSPI_FRAME);
|
|
|
|
/* setup command reg */
|
|
qspi->cmd = 0;
|
|
qspi->cmd |= QSPI_EN_CS(spi->chip_select);
|
|
qspi->cmd |= QSPI_FLEN(frame_len_words);
|
|
|
|
ti_qspi_write(qspi, qspi->dc, QSPI_SPI_DC_REG);
|
|
|
|
mutex_lock(&qspi->list_lock);
|
|
|
|
if (qspi->mmap_enabled)
|
|
ti_qspi_disable_memory_map(spi);
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
qspi->cmd = ((qspi->cmd & ~QSPI_WLEN_MASK) |
|
|
QSPI_WLEN(t->bits_per_word));
|
|
|
|
wlen = t->bits_per_word >> 3;
|
|
transfer_len_words = min(t->len / wlen, frame_len_words);
|
|
|
|
ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
|
|
if (ret) {
|
|
dev_dbg(qspi->dev, "transfer message failed\n");
|
|
mutex_unlock(&qspi->list_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
m->actual_length += transfer_len_words * wlen;
|
|
frame_len_words -= transfer_len_words;
|
|
if (frame_len_words == 0)
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&qspi->list_lock);
|
|
|
|
ti_qspi_write(qspi, qspi->cmd | QSPI_INVAL, QSPI_SPI_CMD_REG);
|
|
m->status = status;
|
|
spi_finalize_current_message(master);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int ti_qspi_runtime_resume(struct device *dev)
|
|
{
|
|
struct ti_qspi *qspi;
|
|
|
|
qspi = dev_get_drvdata(dev);
|
|
ti_qspi_restore_ctx(qspi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ti_qspi_dma_cleanup(struct ti_qspi *qspi)
|
|
{
|
|
if (qspi->rx_bb_addr)
|
|
dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE,
|
|
qspi->rx_bb_addr,
|
|
qspi->rx_bb_dma_addr);
|
|
|
|
if (qspi->rx_chan)
|
|
dma_release_channel(qspi->rx_chan);
|
|
}
|
|
|
|
static const struct of_device_id ti_qspi_match[] = {
|
|
{.compatible = "ti,dra7xxx-qspi" },
|
|
{.compatible = "ti,am4372-qspi" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ti_qspi_match);
|
|
|
|
static int ti_qspi_probe(struct platform_device *pdev)
|
|
{
|
|
struct ti_qspi *qspi;
|
|
struct spi_master *master;
|
|
struct resource *r, *res_mmap;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 max_freq;
|
|
int ret = 0, num_cs, irq;
|
|
dma_cap_mask_t mask;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*qspi));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD;
|
|
|
|
master->flags = SPI_MASTER_HALF_DUPLEX;
|
|
master->setup = ti_qspi_setup;
|
|
master->auto_runtime_pm = true;
|
|
master->transfer_one_message = ti_qspi_start_transfer_one;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
|
|
SPI_BPW_MASK(8);
|
|
master->mem_ops = &ti_qspi_mem_ops;
|
|
|
|
if (!of_property_read_u32(np, "num-cs", &num_cs))
|
|
master->num_chipselect = num_cs;
|
|
|
|
qspi = spi_master_get_devdata(master);
|
|
qspi->master = master;
|
|
qspi->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, qspi);
|
|
|
|
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
|
|
if (r == NULL) {
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (r == NULL) {
|
|
dev_err(&pdev->dev, "missing platform data\n");
|
|
ret = -ENODEV;
|
|
goto free_master;
|
|
}
|
|
}
|
|
|
|
res_mmap = platform_get_resource_byname(pdev,
|
|
IORESOURCE_MEM, "qspi_mmap");
|
|
if (res_mmap == NULL) {
|
|
res_mmap = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (res_mmap == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"memory mapped resource not required\n");
|
|
}
|
|
}
|
|
|
|
if (res_mmap)
|
|
qspi->mmap_size = resource_size(res_mmap);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto free_master;
|
|
}
|
|
|
|
mutex_init(&qspi->list_lock);
|
|
|
|
qspi->base = devm_ioremap_resource(&pdev->dev, r);
|
|
if (IS_ERR(qspi->base)) {
|
|
ret = PTR_ERR(qspi->base);
|
|
goto free_master;
|
|
}
|
|
|
|
|
|
if (of_property_read_bool(np, "syscon-chipselects")) {
|
|
qspi->ctrl_base =
|
|
syscon_regmap_lookup_by_phandle(np,
|
|
"syscon-chipselects");
|
|
if (IS_ERR(qspi->ctrl_base)) {
|
|
ret = PTR_ERR(qspi->ctrl_base);
|
|
goto free_master;
|
|
}
|
|
ret = of_property_read_u32_index(np,
|
|
"syscon-chipselects",
|
|
1, &qspi->ctrl_reg);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"couldn't get ctrl_mod reg index\n");
|
|
goto free_master;
|
|
}
|
|
}
|
|
|
|
qspi->fclk = devm_clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(qspi->fclk)) {
|
|
ret = PTR_ERR(qspi->fclk);
|
|
dev_err(&pdev->dev, "could not get clk: %d\n", ret);
|
|
}
|
|
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, QSPI_AUTOSUSPEND_TIMEOUT);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
if (!of_property_read_u32(np, "spi-max-frequency", &max_freq))
|
|
qspi->spi_max_frequency = max_freq;
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_MEMCPY, mask);
|
|
|
|
qspi->rx_chan = dma_request_chan_by_mask(&mask);
|
|
if (IS_ERR(qspi->rx_chan)) {
|
|
dev_err(qspi->dev,
|
|
"No Rx DMA available, trying mmap mode\n");
|
|
qspi->rx_chan = NULL;
|
|
ret = 0;
|
|
goto no_dma;
|
|
}
|
|
qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev,
|
|
QSPI_DMA_BUFFER_SIZE,
|
|
&qspi->rx_bb_dma_addr,
|
|
GFP_KERNEL | GFP_DMA);
|
|
if (!qspi->rx_bb_addr) {
|
|
dev_err(qspi->dev,
|
|
"dma_alloc_coherent failed, using PIO mode\n");
|
|
dma_release_channel(qspi->rx_chan);
|
|
goto no_dma;
|
|
}
|
|
master->dma_rx = qspi->rx_chan;
|
|
init_completion(&qspi->transfer_complete);
|
|
if (res_mmap)
|
|
qspi->mmap_phys_base = (dma_addr_t)res_mmap->start;
|
|
|
|
no_dma:
|
|
if (!qspi->rx_chan && res_mmap) {
|
|
qspi->mmap_base = devm_ioremap_resource(&pdev->dev, res_mmap);
|
|
if (IS_ERR(qspi->mmap_base)) {
|
|
dev_info(&pdev->dev,
|
|
"mmap failed with error %ld using PIO mode\n",
|
|
PTR_ERR(qspi->mmap_base));
|
|
qspi->mmap_base = NULL;
|
|
master->mem_ops = NULL;
|
|
}
|
|
}
|
|
qspi->mmap_enabled = false;
|
|
qspi->current_cs = -1;
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
ti_qspi_dma_cleanup(qspi);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
free_master:
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int ti_qspi_remove(struct platform_device *pdev)
|
|
{
|
|
struct ti_qspi *qspi = platform_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = spi_master_suspend(qspi->master);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
ti_qspi_dma_cleanup(qspi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops ti_qspi_pm_ops = {
|
|
.runtime_resume = ti_qspi_runtime_resume,
|
|
};
|
|
|
|
static struct platform_driver ti_qspi_driver = {
|
|
.probe = ti_qspi_probe,
|
|
.remove = ti_qspi_remove,
|
|
.driver = {
|
|
.name = "ti-qspi",
|
|
.pm = &ti_qspi_pm_ops,
|
|
.of_match_table = ti_qspi_match,
|
|
}
|
|
};
|
|
|
|
module_platform_driver(ti_qspi_driver);
|
|
|
|
MODULE_AUTHOR("Sourav Poddar <sourav.poddar@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("TI QSPI controller driver");
|
|
MODULE_ALIAS("platform:ti-qspi");
|