406 lines
9.6 KiB
C
406 lines
9.6 KiB
C
/*
|
|
* OMAP2xxx CM module functions
|
|
*
|
|
* Copyright (C) 2009 Nokia Corporation
|
|
* Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
|
|
* Paul Walmsley
|
|
* Rajendra Nayak <rnayak@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "prm2xxx.h"
|
|
#include "cm.h"
|
|
#include "cm2xxx.h"
|
|
#include "cm-regbits-24xx.h"
|
|
#include "clockdomain.h"
|
|
|
|
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
|
|
#define DPLL_AUTOIDLE_DISABLE 0x0
|
|
#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
|
|
|
|
/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
|
|
#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
|
|
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
|
|
|
|
/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
|
|
#define EN_APLL_LOCKED 3
|
|
|
|
static const u8 omap2xxx_cm_idlest_offs[] = {
|
|
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
|
|
};
|
|
|
|
/*
|
|
*
|
|
*/
|
|
|
|
static void _write_clktrctrl(u8 c, s16 module, u32 mask)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
|
|
v &= ~mask;
|
|
v |= c << __ffs(mask);
|
|
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
|
|
}
|
|
|
|
static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
|
|
v &= mask;
|
|
v >>= __ffs(mask);
|
|
|
|
return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
|
|
}
|
|
|
|
static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
|
|
{
|
|
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
|
|
}
|
|
|
|
static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
|
|
{
|
|
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
|
|
}
|
|
|
|
/*
|
|
* DPLL autoidle control
|
|
*/
|
|
|
|
static void _omap2xxx_set_dpll_autoidle(u8 m)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
|
|
v &= ~OMAP24XX_AUTO_DPLL_MASK;
|
|
v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
|
|
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
|
|
}
|
|
|
|
void omap2xxx_cm_set_dpll_disable_autoidle(void)
|
|
{
|
|
_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
|
|
}
|
|
|
|
void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
|
|
{
|
|
_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
|
|
}
|
|
|
|
/*
|
|
* APLL control
|
|
*/
|
|
|
|
static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
|
|
v &= ~mask;
|
|
v |= m << __ffs(mask);
|
|
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
|
|
}
|
|
|
|
void omap2xxx_cm_set_apll54_disable_autoidle(void)
|
|
{
|
|
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
|
|
OMAP24XX_AUTO_54M_MASK);
|
|
}
|
|
|
|
void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
|
|
{
|
|
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
|
|
OMAP24XX_AUTO_54M_MASK);
|
|
}
|
|
|
|
void omap2xxx_cm_set_apll96_disable_autoidle(void)
|
|
{
|
|
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
|
|
OMAP24XX_AUTO_96M_MASK);
|
|
}
|
|
|
|
void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
|
|
{
|
|
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
|
|
OMAP24XX_AUTO_96M_MASK);
|
|
}
|
|
|
|
/* Enable an APLL if off */
|
|
static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
|
|
{
|
|
u32 v, m;
|
|
|
|
m = EN_APLL_LOCKED << enable_bit;
|
|
|
|
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
|
|
if (v & m)
|
|
return 0; /* apll already enabled */
|
|
|
|
v |= m;
|
|
omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
|
|
|
|
omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
|
|
|
|
/*
|
|
* REVISIT: Should we return an error code if
|
|
* omap2xxx_cm_wait_module_ready() fails?
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
/* Stop APLL */
|
|
static void _omap2xxx_apll_disable(u8 enable_bit)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
|
|
v &= ~(EN_APLL_LOCKED << enable_bit);
|
|
omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
|
|
}
|
|
|
|
/* Enable an APLL if off */
|
|
int omap2xxx_cm_apll54_enable(void)
|
|
{
|
|
return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
|
|
OMAP24XX_ST_54M_APLL_SHIFT);
|
|
}
|
|
|
|
/* Enable an APLL if off */
|
|
int omap2xxx_cm_apll96_enable(void)
|
|
{
|
|
return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
|
|
OMAP24XX_ST_96M_APLL_SHIFT);
|
|
}
|
|
|
|
/* Stop APLL */
|
|
void omap2xxx_cm_apll54_disable(void)
|
|
{
|
|
_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
|
|
}
|
|
|
|
/* Stop APLL */
|
|
void omap2xxx_cm_apll96_disable(void)
|
|
{
|
|
_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
|
|
}
|
|
|
|
/**
|
|
* omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
|
|
* @idlest_reg: CM_IDLEST* virtual address
|
|
* @prcm_inst: pointer to an s16 to return the PRCM instance offset
|
|
* @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
|
|
*
|
|
* XXX This function is only needed until absolute register addresses are
|
|
* removed from the OMAP struct clk records.
|
|
*/
|
|
static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
|
|
s16 *prcm_inst,
|
|
u8 *idlest_reg_id)
|
|
{
|
|
unsigned long offs;
|
|
u8 idlest_offs;
|
|
int i;
|
|
|
|
if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff))
|
|
return -EINVAL;
|
|
|
|
idlest_offs = (unsigned long)idlest_reg & 0xff;
|
|
for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
|
|
if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
|
|
*idlest_reg_id = i + 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
|
|
return -EINVAL;
|
|
|
|
offs = idlest_reg - cm_base;
|
|
offs &= 0xff00;
|
|
*prcm_inst = offs;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
|
|
* @part: PRCM partition, ignored for OMAP2
|
|
* @prcm_mod: PRCM module offset
|
|
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
|
|
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
|
|
*
|
|
* Wait for the PRCM to indicate that the module identified by
|
|
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
|
|
* success or -EBUSY if the module doesn't enable in time.
|
|
*/
|
|
int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
|
|
u8 idlest_shift)
|
|
{
|
|
int ena = 0, i = 0;
|
|
u8 cm_idlest_reg;
|
|
u32 mask;
|
|
|
|
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
|
|
return -EINVAL;
|
|
|
|
cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
|
|
|
|
mask = 1 << idlest_shift;
|
|
ena = mask;
|
|
|
|
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
|
|
mask) == ena), MAX_MODULE_READY_TIME, i);
|
|
|
|
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
|
|
}
|
|
|
|
/* Clockdomain low-level functions */
|
|
|
|
static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
|
|
{
|
|
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
}
|
|
|
|
static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
|
|
{
|
|
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
}
|
|
|
|
static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
|
|
{
|
|
bool hwsup = false;
|
|
|
|
if (!clkdm->clktrctrl_mask)
|
|
return 0;
|
|
|
|
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
|
|
omap2xxx_clkdm_wakeup(clkdm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
|
|
{
|
|
bool hwsup = false;
|
|
|
|
if (!clkdm->clktrctrl_mask)
|
|
return 0;
|
|
|
|
hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
|
|
if (!hwsup && clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
|
|
omap2xxx_clkdm_sleep(clkdm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct clkdm_ops omap2_clkdm_operations = {
|
|
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
|
|
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
|
|
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
|
|
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
|
|
.clkdm_sleep = omap2xxx_clkdm_sleep,
|
|
.clkdm_wakeup = omap2xxx_clkdm_wakeup,
|
|
.clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
|
|
.clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
|
|
.clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
|
|
.clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
|
|
};
|
|
|
|
int omap2xxx_cm_fclks_active(void)
|
|
{
|
|
u32 f1, f2;
|
|
|
|
f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
|
|
f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
|
|
|
|
return (f1 | f2) ? 1 : 0;
|
|
}
|
|
|
|
int omap2xxx_cm_mpu_retention_allowed(void)
|
|
{
|
|
u32 l;
|
|
|
|
/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
|
|
l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
|
|
if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
|
|
OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
|
|
OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
|
|
return 0;
|
|
/* Check for UART3. */
|
|
l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
|
|
if (l & OMAP24XX_EN_UART3_MASK)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
u32 omap2xxx_cm_get_core_clk_src(void)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
|
v &= OMAP24XX_CORE_CLK_SRC_MASK;
|
|
|
|
return v;
|
|
}
|
|
|
|
u32 omap2xxx_cm_get_core_pll_config(void)
|
|
{
|
|
return omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
|
|
}
|
|
|
|
void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm)
|
|
{
|
|
u32 tmp;
|
|
|
|
omap2_cm_write_mod_reg(mpu, MPU_MOD, CM_CLKSEL);
|
|
omap2_cm_write_mod_reg(dsp, OMAP24XX_DSP_MOD, CM_CLKSEL);
|
|
omap2_cm_write_mod_reg(gfx, GFX_MOD, CM_CLKSEL);
|
|
tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) &
|
|
OMAP24XX_CLKSEL_DSS2_MASK;
|
|
omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1);
|
|
if (mdm)
|
|
omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL);
|
|
}
|
|
|
|
/*
|
|
*
|
|
*/
|
|
|
|
static struct cm_ll_data omap2xxx_cm_ll_data = {
|
|
.split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
|
|
.wait_module_ready = &omap2xxx_cm_wait_module_ready,
|
|
};
|
|
|
|
int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
|
|
{
|
|
return cm_register(&omap2xxx_cm_ll_data);
|
|
}
|
|
|
|
static void __exit omap2xxx_cm_exit(void)
|
|
{
|
|
cm_unregister(&omap2xxx_cm_ll_data);
|
|
}
|
|
__exitcall(omap2xxx_cm_exit);
|