OpenCloudOS-Kernel/drivers/iio
Linus Walleij c5842b47b2 iio: pressure: bmp280: add reset GPIO line handling
On the APQ8060 Dragonboard the reset line to the BMP085 pressure
sensor is not deasserted on boot, so the driver needs to handle
this. For a simple GPIO line supplied as a descriptor (from a board
file, device tree or ACPI) this does the trick.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30 20:39:40 +01:00
..
accel iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
adc iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: buffer-dma: Use ARRAY_SIZE in for loop range 2016-06-27 21:06:40 +01:00
chemical iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
common iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
dac iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
dummy iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
health First round of IIO new device support, features and cleanups for the 4.8 cycle. 2016-06-09 09:15:58 -07:00
humidity Merge 4.7-rc4 into staging-next 2016-06-20 08:25:44 -07:00
imu iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
light iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
magnetometer iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
orientation iio: orientation: hid-sensor-rotation: Fix memory leak in probe() 2015-05-17 09:10:25 +01:00
potentiometer iio: max5487: Add support for Maxim digital potentiometers 2016-05-21 20:13:14 +01:00
pressure iio: pressure: bmp280: add reset GPIO line handling 2016-06-30 20:39:40 +01:00
proximity iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
temperature iio: Export I2C module alias information 2016-05-21 20:08:14 +01:00
trigger iio:trigger: Experimental kthread tight loop trigger (thread only) 2016-06-03 13:18:44 +01:00
Kconfig iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
Makefile iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h
industrialio-buffer.c iio: fix config watermark initial value 2016-03-28 11:00:38 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-event.c iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: core: Add devm_ APIs for iio_channel_{get,release}_all 2016-04-19 19:58:15 +01:00