548 lines
13 KiB
C
548 lines
13 KiB
C
/*
|
|
* Low-Level PCI Express Support for the SH7786
|
|
*
|
|
* Copyright (C) 2009 - 2010 Paul Mundt
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/sh_clk.h>
|
|
#include "pcie-sh7786.h"
|
|
#include <asm/sizes.h>
|
|
#include <asm/clock.h>
|
|
|
|
struct sh7786_pcie_port {
|
|
struct pci_channel *hose;
|
|
struct clk *fclk, phy_clk;
|
|
unsigned int index;
|
|
int endpoint;
|
|
int link;
|
|
};
|
|
|
|
static struct sh7786_pcie_port *sh7786_pcie_ports;
|
|
static unsigned int nr_ports;
|
|
|
|
static struct sh7786_pcie_hwops {
|
|
int (*core_init)(void);
|
|
int (*port_init_hw)(struct sh7786_pcie_port *port);
|
|
} *sh7786_pcie_hwops;
|
|
|
|
static struct resource sh7786_pci0_resources[] = {
|
|
{
|
|
.name = "PCIe0 IO",
|
|
.start = 0xfd000000,
|
|
.end = 0xfd000000 + SZ_8M - 1,
|
|
.flags = IORESOURCE_IO,
|
|
}, {
|
|
.name = "PCIe0 MEM 0",
|
|
.start = 0xc0000000,
|
|
.end = 0xc0000000 + SZ_512M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
.name = "PCIe0 MEM 1",
|
|
.start = 0x10000000,
|
|
.end = 0x10000000 + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}, {
|
|
.name = "PCIe0 MEM 2",
|
|
.start = 0xfe100000,
|
|
.end = 0xfe100000 + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct resource sh7786_pci1_resources[] = {
|
|
{
|
|
.name = "PCIe1 IO",
|
|
.start = 0xfd800000,
|
|
.end = 0xfd800000 + SZ_8M - 1,
|
|
.flags = IORESOURCE_IO,
|
|
}, {
|
|
.name = "PCIe1 MEM 0",
|
|
.start = 0xa0000000,
|
|
.end = 0xa0000000 + SZ_512M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
.name = "PCIe1 MEM 1",
|
|
.start = 0x30000000,
|
|
.end = 0x30000000 + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
.name = "PCIe1 MEM 2",
|
|
.start = 0xfe300000,
|
|
.end = 0xfe300000 + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct resource sh7786_pci2_resources[] = {
|
|
{
|
|
.name = "PCIe2 IO",
|
|
.start = 0xfc800000,
|
|
.end = 0xfc800000 + SZ_4M - 1,
|
|
.flags = IORESOURCE_IO,
|
|
}, {
|
|
.name = "PCIe2 MEM 0",
|
|
.start = 0x80000000,
|
|
.end = 0x80000000 + SZ_512M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
.name = "PCIe2 MEM 1",
|
|
.start = 0x20000000,
|
|
.end = 0x20000000 + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
|
|
}, {
|
|
.name = "PCIe2 MEM 2",
|
|
.start = 0xfcd00000,
|
|
.end = 0xfcd00000 + SZ_1M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
extern struct pci_ops sh7786_pci_ops;
|
|
|
|
#define DEFINE_CONTROLLER(start, idx) \
|
|
{ \
|
|
.pci_ops = &sh7786_pci_ops, \
|
|
.resources = sh7786_pci##idx##_resources, \
|
|
.nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
|
|
.reg_base = start, \
|
|
.mem_offset = 0, \
|
|
.io_offset = 0, \
|
|
}
|
|
|
|
static struct pci_channel sh7786_pci_channels[] = {
|
|
DEFINE_CONTROLLER(0xfe000000, 0),
|
|
DEFINE_CONTROLLER(0xfe200000, 1),
|
|
DEFINE_CONTROLLER(0xfcc00000, 2),
|
|
};
|
|
|
|
static struct clk fixed_pciexclkp = {
|
|
.rate = 100000000, /* 100 MHz reference clock */
|
|
};
|
|
|
|
static void __devinit sh7786_pci_fixup(struct pci_dev *dev)
|
|
{
|
|
/*
|
|
* Prevent enumeration of root complex resources.
|
|
*/
|
|
if (pci_is_root_bus(dev->bus) && dev->devfn == 0) {
|
|
int i;
|
|
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
dev->resource[i].start = 0;
|
|
dev->resource[i].end = 0;
|
|
dev->resource[i].flags = 0;
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RENESAS, PCI_DEVICE_ID_RENESAS_SH7786,
|
|
sh7786_pci_fixup);
|
|
|
|
static int __init phy_wait_for_ack(struct pci_channel *chan)
|
|
{
|
|
unsigned int timeout = 100;
|
|
|
|
while (timeout--) {
|
|
if (pci_read_reg(chan, SH4A_PCIEPHYADRR) & (1 << BITS_ACK))
|
|
return 0;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int __init pci_wait_for_irq(struct pci_channel *chan, unsigned int mask)
|
|
{
|
|
unsigned int timeout = 100;
|
|
|
|
while (timeout--) {
|
|
if ((pci_read_reg(chan, SH4A_PCIEINTR) & mask) == mask)
|
|
return 0;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void __init phy_write_reg(struct pci_channel *chan, unsigned int addr,
|
|
unsigned int lane, unsigned int data)
|
|
{
|
|
unsigned long phyaddr;
|
|
|
|
phyaddr = (1 << BITS_CMD) + ((lane & 0xf) << BITS_LANE) +
|
|
((addr & 0xff) << BITS_ADR);
|
|
|
|
/* Set write data */
|
|
pci_write_reg(chan, data, SH4A_PCIEPHYDOUTR);
|
|
pci_write_reg(chan, phyaddr, SH4A_PCIEPHYADRR);
|
|
|
|
phy_wait_for_ack(chan);
|
|
|
|
/* Clear command */
|
|
pci_write_reg(chan, 0, SH4A_PCIEPHYDOUTR);
|
|
pci_write_reg(chan, 0, SH4A_PCIEPHYADRR);
|
|
|
|
phy_wait_for_ack(chan);
|
|
}
|
|
|
|
static int __init pcie_clk_init(struct sh7786_pcie_port *port)
|
|
{
|
|
struct pci_channel *chan = port->hose;
|
|
struct clk *clk;
|
|
char fclk_name[16];
|
|
int ret;
|
|
|
|
/*
|
|
* First register the fixed clock
|
|
*/
|
|
ret = clk_register(&fixed_pciexclkp);
|
|
if (unlikely(ret != 0))
|
|
return ret;
|
|
|
|
/*
|
|
* Grab the port's function clock, which the PHY clock depends
|
|
* on. clock lookups don't help us much at this point, since no
|
|
* dev_id is available this early. Lame.
|
|
*/
|
|
snprintf(fclk_name, sizeof(fclk_name), "pcie%d_fck", port->index);
|
|
|
|
port->fclk = clk_get(NULL, fclk_name);
|
|
if (IS_ERR(port->fclk)) {
|
|
ret = PTR_ERR(port->fclk);
|
|
goto err_fclk;
|
|
}
|
|
|
|
clk_enable(port->fclk);
|
|
|
|
/*
|
|
* And now, set up the PHY clock
|
|
*/
|
|
clk = &port->phy_clk;
|
|
|
|
memset(clk, 0, sizeof(struct clk));
|
|
|
|
clk->parent = &fixed_pciexclkp;
|
|
clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR);
|
|
clk->enable_bit = BITS_CKE;
|
|
|
|
ret = sh_clk_mstp32_register(clk, 1);
|
|
if (unlikely(ret < 0))
|
|
goto err_phy;
|
|
|
|
return 0;
|
|
|
|
err_phy:
|
|
clk_disable(port->fclk);
|
|
clk_put(port->fclk);
|
|
err_fclk:
|
|
clk_unregister(&fixed_pciexclkp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init phy_init(struct sh7786_pcie_port *port)
|
|
{
|
|
struct pci_channel *chan = port->hose;
|
|
unsigned int timeout = 100;
|
|
|
|
clk_enable(&port->phy_clk);
|
|
|
|
/* Initialize the phy */
|
|
phy_write_reg(chan, 0x60, 0xf, 0x004b008b);
|
|
phy_write_reg(chan, 0x61, 0xf, 0x00007b41);
|
|
phy_write_reg(chan, 0x64, 0xf, 0x00ff4f00);
|
|
phy_write_reg(chan, 0x65, 0xf, 0x09070907);
|
|
phy_write_reg(chan, 0x66, 0xf, 0x00000010);
|
|
phy_write_reg(chan, 0x74, 0xf, 0x0007001c);
|
|
phy_write_reg(chan, 0x79, 0xf, 0x01fc000d);
|
|
phy_write_reg(chan, 0xb0, 0xf, 0x00000610);
|
|
|
|
/* Deassert Standby */
|
|
phy_write_reg(chan, 0x67, 0x1, 0x00000400);
|
|
|
|
/* Disable clock */
|
|
clk_disable(&port->phy_clk);
|
|
|
|
while (timeout--) {
|
|
if (pci_read_reg(chan, SH4A_PCIEPHYSR))
|
|
return 0;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void __init pcie_reset(struct sh7786_pcie_port *port)
|
|
{
|
|
struct pci_channel *chan = port->hose;
|
|
|
|
pci_write_reg(chan, 1, SH4A_PCIESRSTR);
|
|
pci_write_reg(chan, 0, SH4A_PCIETCTLR);
|
|
pci_write_reg(chan, 0, SH4A_PCIESRSTR);
|
|
pci_write_reg(chan, 0, SH4A_PCIETXVC0SR);
|
|
}
|
|
|
|
static int __init pcie_init(struct sh7786_pcie_port *port)
|
|
{
|
|
struct pci_channel *chan = port->hose;
|
|
unsigned int data;
|
|
phys_addr_t memphys;
|
|
size_t memsize;
|
|
int ret, i, win;
|
|
|
|
/* Begin initialization */
|
|
pcie_reset(port);
|
|
|
|
/*
|
|
* Initial header for port config space is type 1, set the device
|
|
* class to match. Hardware takes care of propagating the IDSETR
|
|
* settings, so there is no need to bother with a quirk.
|
|
*/
|
|
pci_write_reg(chan, PCI_CLASS_BRIDGE_PCI << 16, SH4A_PCIEIDSETR1);
|
|
|
|
/* Initialize default capabilities. */
|
|
data = pci_read_reg(chan, SH4A_PCIEEXPCAP0);
|
|
data &= ~(PCI_EXP_FLAGS_TYPE << 16);
|
|
|
|
if (port->endpoint)
|
|
data |= PCI_EXP_TYPE_ENDPOINT << 20;
|
|
else
|
|
data |= PCI_EXP_TYPE_ROOT_PORT << 20;
|
|
|
|
data |= PCI_CAP_ID_EXP;
|
|
pci_write_reg(chan, data, SH4A_PCIEEXPCAP0);
|
|
|
|
/* Enable data link layer active state reporting */
|
|
pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3);
|
|
|
|
/* Enable extended sync and ASPM L0s support */
|
|
data = pci_read_reg(chan, SH4A_PCIEEXPCAP4);
|
|
data &= ~PCI_EXP_LNKCTL_ASPMC;
|
|
data |= PCI_EXP_LNKCTL_ES | 1;
|
|
pci_write_reg(chan, data, SH4A_PCIEEXPCAP4);
|
|
|
|
/* Write out the physical slot number */
|
|
data = pci_read_reg(chan, SH4A_PCIEEXPCAP5);
|
|
data &= ~PCI_EXP_SLTCAP_PSN;
|
|
data |= (port->index + 1) << 19;
|
|
pci_write_reg(chan, data, SH4A_PCIEEXPCAP5);
|
|
|
|
/* Set the completion timer timeout to the maximum 32ms. */
|
|
data = pci_read_reg(chan, SH4A_PCIETLCTLR);
|
|
data &= ~0x3f00;
|
|
data |= 0x32 << 8;
|
|
pci_write_reg(chan, data, SH4A_PCIETLCTLR);
|
|
|
|
/*
|
|
* Set fast training sequences to the maximum 255,
|
|
* and enable MAC data scrambling.
|
|
*/
|
|
data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
|
|
data &= ~PCIEMACCTLR_SCR_DIS;
|
|
data |= (0xff << 16);
|
|
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
|
|
|
|
memphys = __pa(memory_start);
|
|
memsize = roundup_pow_of_two(memory_end - memory_start);
|
|
|
|
/*
|
|
* If there's more than 512MB of memory, we need to roll over to
|
|
* LAR1/LAMR1.
|
|
*/
|
|
if (memsize > SZ_512M) {
|
|
pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1);
|
|
pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
|
|
SH4A_PCIELAMR1);
|
|
memsize = SZ_512M;
|
|
} else {
|
|
/*
|
|
* Otherwise just zero it out and disable it.
|
|
*/
|
|
pci_write_reg(chan, 0, SH4A_PCIELAR1);
|
|
pci_write_reg(chan, 0, SH4A_PCIELAMR1);
|
|
}
|
|
|
|
/*
|
|
* LAR0/LAMR0 covers up to the first 512MB, which is enough to
|
|
* cover all of lowmem on most platforms.
|
|
*/
|
|
pci_write_reg(chan, memphys, SH4A_PCIELAR0);
|
|
pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
|
|
|
|
/* Finish initialization */
|
|
data = pci_read_reg(chan, SH4A_PCIETCTLR);
|
|
data |= 0x1;
|
|
pci_write_reg(chan, data, SH4A_PCIETCTLR);
|
|
|
|
/* Let things settle down a bit.. */
|
|
mdelay(100);
|
|
|
|
/* Enable DL_Active Interrupt generation */
|
|
data = pci_read_reg(chan, SH4A_PCIEDLINTENR);
|
|
data |= PCIEDLINTENR_DLL_ACT_ENABLE;
|
|
pci_write_reg(chan, data, SH4A_PCIEDLINTENR);
|
|
|
|
/* Disable MAC data scrambling. */
|
|
data = pci_read_reg(chan, SH4A_PCIEMACCTLR);
|
|
data |= PCIEMACCTLR_SCR_DIS | (0xff << 16);
|
|
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
|
|
|
|
/*
|
|
* This will timeout if we don't have a link, but we permit the
|
|
* port to register anyways in order to support hotplug on future
|
|
* hardware.
|
|
*/
|
|
ret = pci_wait_for_irq(chan, MASK_INT_TX_CTRL);
|
|
|
|
data = pci_read_reg(chan, SH4A_PCIEPCICONF1);
|
|
data &= ~(PCI_STATUS_DEVSEL_MASK << 16);
|
|
data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
|
|
(PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16;
|
|
pci_write_reg(chan, data, SH4A_PCIEPCICONF1);
|
|
|
|
pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR);
|
|
pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR);
|
|
|
|
wmb();
|
|
|
|
if (ret == 0) {
|
|
data = pci_read_reg(chan, SH4A_PCIEMACSR);
|
|
printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
|
|
port->index, (data >> 20) & 0x3f);
|
|
} else
|
|
printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
|
|
port->index);
|
|
|
|
for (i = win = 0; i < chan->nr_resources; i++) {
|
|
struct resource *res = chan->resources + i;
|
|
resource_size_t size;
|
|
u32 mask;
|
|
|
|
/*
|
|
* We can't use the 32-bit mode windows in legacy 29-bit
|
|
* mode, so just skip them entirely.
|
|
*/
|
|
if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
|
|
continue;
|
|
|
|
pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
|
|
|
|
/*
|
|
* The PAMR mask is calculated in units of 256kB, which
|
|
* keeps things pretty simple.
|
|
*/
|
|
size = resource_size(res);
|
|
mask = (roundup_pow_of_two(size) / SZ_256K) - 1;
|
|
pci_write_reg(chan, mask << 18, SH4A_PCIEPAMR(win));
|
|
|
|
pci_write_reg(chan, RES_TO_U32_HIGH(res->start),
|
|
SH4A_PCIEPARH(win));
|
|
pci_write_reg(chan, RES_TO_U32_LOW(res->start),
|
|
SH4A_PCIEPARL(win));
|
|
|
|
mask = MASK_PARE;
|
|
if (res->flags & IORESOURCE_IO)
|
|
mask |= MASK_SPC;
|
|
|
|
pci_write_reg(chan, mask, SH4A_PCIEPTCTLR(win));
|
|
|
|
win++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
|
|
{
|
|
return 71;
|
|
}
|
|
|
|
static int __init sh7786_pcie_core_init(void)
|
|
{
|
|
/* Return the number of ports */
|
|
return test_mode_pin(MODE_PIN12) ? 3 : 2;
|
|
}
|
|
|
|
static int __init sh7786_pcie_init_hw(struct sh7786_pcie_port *port)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Check if we are configured in endpoint or root complex mode,
|
|
* this is a fixed pin setting that applies to all PCIe ports.
|
|
*/
|
|
port->endpoint = test_mode_pin(MODE_PIN11);
|
|
|
|
/*
|
|
* Setup clocks, needed both for PHY and PCIe registers.
|
|
*/
|
|
ret = pcie_clk_init(port);
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
ret = phy_init(port);
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
ret = pcie_init(port);
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
return register_pci_controller(port->hose);
|
|
}
|
|
|
|
static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
|
|
.core_init = sh7786_pcie_core_init,
|
|
.port_init_hw = sh7786_pcie_init_hw,
|
|
};
|
|
|
|
static int __init sh7786_pcie_init(void)
|
|
{
|
|
int ret = 0, i;
|
|
|
|
printk(KERN_NOTICE "PCI: Starting initialization.\n");
|
|
|
|
sh7786_pcie_hwops = &sh7786_65nm_pcie_hwops;
|
|
|
|
nr_ports = sh7786_pcie_hwops->core_init();
|
|
BUG_ON(nr_ports > ARRAY_SIZE(sh7786_pci_channels));
|
|
|
|
if (unlikely(nr_ports == 0))
|
|
return -ENODEV;
|
|
|
|
sh7786_pcie_ports = kzalloc(nr_ports * sizeof(struct sh7786_pcie_port),
|
|
GFP_KERNEL);
|
|
if (unlikely(!sh7786_pcie_ports))
|
|
return -ENOMEM;
|
|
|
|
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
|
|
|
|
for (i = 0; i < nr_ports; i++) {
|
|
struct sh7786_pcie_port *port = sh7786_pcie_ports + i;
|
|
|
|
port->index = i;
|
|
port->hose = sh7786_pci_channels + i;
|
|
port->hose->io_map_base = port->hose->resources[0].start;
|
|
|
|
ret |= sh7786_pcie_hwops->port_init_hw(port);
|
|
}
|
|
|
|
if (unlikely(ret))
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(sh7786_pcie_init);
|