dec1fbbc1d
* Spelling * http to https updates NAND core changes: * Drop useless 'depends on' in Kconfig * Add an extra level in the Kconfig hierarchy * Trivial spellings * Dynamic allocation of the interface configurations * Dropping the default ONFI timing mode * Various cleanup (types, structures, naming, comments) * Hide the chip->data_interface indirection * Add the generic rb-gpios property * Add the ->choose_interface_config() hook * Introduce nand_choose_best_sdr_timings() * Use default values for tPROG_max and tBERS_max * Avoid redefining tR_max and tCCS_min * Add a helper to find the closest ONFI mode * bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: * fsl-upm: Deprecation of specific DT properties * fsl_upm: Driver rework and cleanup in favor of ->exec_op() * Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use * brcmnand: ECC error handling on EDU transfers * brcmnand: Don't default to EDU transfers * qcom: Set BAM mode only if not set already * qcom: Avoid write to unavailable register * gpio: Driver rework in favor of ->exec_op() * tango: ->exec_op() conversion * mtk: ->exec_op() conversion Raw NAND chip drivers changes: * toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 * toshiba: Implement ->choose_interface_config() for TC58NVG0S3E * toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 * hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: * Disable Quad Mode in spi_nor_restore(). * Don't abort BFPT parsing when QER reserved value is used. * Add support/update capabilities for few flashes. * Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. * Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: * Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. * intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl8vJtMACgkQJWrqGEe9 VoRdGAf/Y5m5BwmLilkEYpffyxi7dVR6XOKPLU5EJXkS3dPvH9398zchbHOdedCZ OzJIfh6Iv+qbkgS2g0lAAT+SAfOfG9plubvSdkjrHXl4eZXRnR/49RF5LAEju7sz Uw1HdRcawyEi5uI9yYS0tCeVMIUJq+5x7VibH+82yOIdSPc60c7FDc5ih/nVKj/a Pn9LOzGzkdndcE1b3FcF2Uk/T1YOJx3Yt5ngALlPpJxaDZmQSHtYPuuz8DfUbamf uj3CkpqYRyT18CzuFvtuba6LyF+donXNJgvl6ivW7dlRSPzSMnDQu7J5bpNhUfcd p/ZdzX1Jxle4theDm0J9ALsSSM5g2w== =RiY8 -----END PGP SIGNATURE----- Merge tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ... |
||
---|---|---|
.. | ||
chips | ||
devices | ||
hyperbus | ||
lpddr | ||
maps | ||
nand | ||
parsers | ||
spi-nor | ||
tests | ||
ubi | ||
Kconfig | ||
Makefile | ||
ftl.c | ||
inftlcore.c | ||
inftlmount.c | ||
mtd_blkdevs.c | ||
mtdblock.c | ||
mtdblock_ro.c | ||
mtdchar.c | ||
mtdconcat.c | ||
mtdcore.c | ||
mtdcore.h | ||
mtdoops.c | ||
mtdpart.c | ||
mtdpstore.c | ||
mtdsuper.c | ||
mtdswap.c | ||
nftlcore.c | ||
nftlmount.c | ||
rfd_ftl.c | ||
sm_ftl.c | ||
sm_ftl.h | ||
ssfdc.c |