OpenCloudOS-Kernel/include/linux/mtd/fsmc.h

157 lines
4.0 KiB
C

/*
* incude/mtd/fsmc.h
*
* ST Microelectronics
* Flexible Static Memory Controller (FSMC)
* platform data interface and header file
*
* Copyright © 2010 ST Microelectronics
* Vipin Kumar <vipin.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MTD_FSMC_H
#define __MTD_FSMC_H
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/types.h>
#include <linux/mtd/partitions.h>
#include <asm/param.h>
#define FSMC_NAND_BW8 1
#define FSMC_NAND_BW16 2
#define FSMC_MAX_NOR_BANKS 4
#define FSMC_MAX_NAND_BANKS 4
#define FSMC_FLASH_WIDTH8 1
#define FSMC_FLASH_WIDTH16 2
/* fsmc controller registers for NOR flash */
#define CTRL 0x0
/* ctrl register definitions */
#define BANK_ENABLE (1 << 0)
#define MUXED (1 << 1)
#define NOR_DEV (2 << 2)
#define WIDTH_8 (0 << 4)
#define WIDTH_16 (1 << 4)
#define RSTPWRDWN (1 << 6)
#define WPROT (1 << 7)
#define WRT_ENABLE (1 << 12)
#define WAIT_ENB (1 << 13)
#define CTRL_TIM 0x4
/* ctrl_tim register definitions */
#define FSMC_NOR_BANK_SZ 0x8
#define FSMC_NOR_REG_SIZE 0x40
#define FSMC_NOR_REG(base, bank, reg) (base + \
FSMC_NOR_BANK_SZ * (bank) + \
reg)
/* fsmc controller registers for NAND flash */
#define PC 0x00
/* pc register definitions */
#define FSMC_RESET (1 << 0)
#define FSMC_WAITON (1 << 1)
#define FSMC_ENABLE (1 << 2)
#define FSMC_DEVTYPE_NAND (1 << 3)
#define FSMC_DEVWID_8 (0 << 4)
#define FSMC_DEVWID_16 (1 << 4)
#define FSMC_ECCEN (1 << 6)
#define FSMC_ECCPLEN_512 (0 << 7)
#define FSMC_ECCPLEN_256 (1 << 7)
#define FSMC_TCLR_1 (1)
#define FSMC_TCLR_SHIFT (9)
#define FSMC_TCLR_MASK (0xF)
#define FSMC_TAR_1 (1)
#define FSMC_TAR_SHIFT (13)
#define FSMC_TAR_MASK (0xF)
#define STS 0x04
/* sts register definitions */
#define FSMC_CODE_RDY (1 << 15)
#define COMM 0x08
/* comm register definitions */
#define FSMC_TSET_0 0
#define FSMC_TSET_SHIFT 0
#define FSMC_TSET_MASK 0xFF
#define FSMC_TWAIT_6 6
#define FSMC_TWAIT_SHIFT 8
#define FSMC_TWAIT_MASK 0xFF
#define FSMC_THOLD_4 4
#define FSMC_THOLD_SHIFT 16
#define FSMC_THOLD_MASK 0xFF
#define FSMC_THIZ_1 1
#define FSMC_THIZ_SHIFT 24
#define FSMC_THIZ_MASK 0xFF
#define ATTRIB 0x0C
#define IOATA 0x10
#define ECC1 0x14
#define ECC2 0x18
#define ECC3 0x1C
#define FSMC_NAND_BANK_SZ 0x20
#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
(FSMC_NAND_BANK_SZ * (bank)) + \
reg)
#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
struct fsmc_nand_timings {
uint8_t tclr;
uint8_t tar;
uint8_t thiz;
uint8_t thold;
uint8_t twait;
uint8_t tset;
};
enum access_mode {
USE_DMA_ACCESS = 1,
USE_WORD_ACCESS,
};
/**
* fsmc_nand_platform_data - platform specific NAND controller config
* @nand_timings: timing setup for the physical NAND interface
* @partitions: partition table for the platform, use a default fallback
* if this is NULL
* @nr_partitions: the number of partitions in the previous entry
* @options: different options for the driver
* @width: bus width
* @bank: default bank
* @select_bank: callback to select a certain bank, this is
* platform-specific. If the controller only supports one bank
* this may be set to NULL
*/
struct fsmc_nand_platform_data {
struct fsmc_nand_timings *nand_timings;
struct mtd_partition *partitions;
unsigned int nr_partitions;
unsigned int options;
unsigned int width;
unsigned int bank;
enum access_mode mode;
void (*select_bank)(uint32_t bank, uint32_t busw);
/* priv structures for dma accesses */
void *read_dma_priv;
void *write_dma_priv;
};
extern int __init fsmc_nor_init(struct platform_device *pdev,
unsigned long base, uint32_t bank, uint32_t width);
extern void __init fsmc_init_board_info(struct platform_device *pdev,
struct mtd_partition *partitions, unsigned int nr_partitions,
unsigned int width);
#endif /* __MTD_FSMC_H */