714 lines
18 KiB
C
714 lines
18 KiB
C
/*
|
|
* sata_promise.c - Promise SATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
*
|
|
* The contents of this file are subject to the Open
|
|
* Software License version 1.1 that can be found at
|
|
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
|
|
* by reference.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the terms
|
|
* of the GNU General Public License version 2 (the "GPL") as distributed
|
|
* in the kernel source COPYING file, in which case the provisions of
|
|
* the GPL are applicable instead of the above. If you wish to allow
|
|
* the use of your version of this file only under the terms of the
|
|
* GPL and not to allow others to use your version of this file under
|
|
* the OSL, indicate your decision by deleting the provisions above and
|
|
* replace them with the notice and other provisions required by the GPL.
|
|
* If you do not delete the provisions above, a recipient may use your
|
|
* version of this file under either the OSL or the GPL.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
#include "sata_promise.h"
|
|
|
|
#define DRV_NAME "sata_promise"
|
|
#define DRV_VERSION "1.01"
|
|
|
|
|
|
enum {
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
PDC_TBG_MODE = 0x41, /* TBG mode */
|
|
PDC_FLASH_CTL = 0x44, /* Flash control register */
|
|
PDC_PCI_CTL = 0x48, /* PCI control and status register */
|
|
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
|
|
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
|
|
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
|
|
PDC_SLEW_CTL = 0x470, /* slew rate control reg */
|
|
|
|
PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
|
|
(1<<8) | (1<<9) | (1<<10),
|
|
|
|
board_2037x = 0, /* FastTrak S150 TX2plus */
|
|
board_20319 = 1, /* FastTrak S150 TX4 */
|
|
board_20619 = 2, /* FastTrak TX4000 */
|
|
|
|
PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
|
|
|
|
PDC_RESET = (1 << 11), /* HDMA reset */
|
|
};
|
|
|
|
|
|
struct pdc_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
};
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
|
|
static void pdc_eng_timeout(struct ata_port *ap);
|
|
static int pdc_port_start(struct ata_port *ap);
|
|
static void pdc_port_stop(struct ata_port *ap);
|
|
static void pdc_phy_reset(struct ata_port *ap);
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc);
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void pdc_irq_clear(struct ata_port *ap);
|
|
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
|
|
|
|
static Scsi_Host_Template pdc_ata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1,
|
|
};
|
|
|
|
static struct ata_port_operations pdc_ata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.phy_reset = pdc_phy_reset,
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.eng_timeout = pdc_eng_timeout,
|
|
.irq_handler = pdc_interrupt,
|
|
.irq_clear = pdc_irq_clear,
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_port_start,
|
|
.port_stop = pdc_port_stop,
|
|
.host_stop = ata_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info pdc_port_info[] = {
|
|
/* board_2037x */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SRST | ATA_FLAG_MMIO,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_ata_ops,
|
|
},
|
|
|
|
/* board_20319 */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_SRST | ATA_FLAG_MMIO,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_ata_ops,
|
|
},
|
|
|
|
/* board_20619 */
|
|
{
|
|
.sht = &pdc_ata_sht,
|
|
.host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
|
|
ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
|
|
.port_ops = &pdc_ata_ops,
|
|
},
|
|
};
|
|
|
|
static struct pci_device_id pdc_ata_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_2037x },
|
|
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20319 },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20319 },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3519, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20319 },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20319 },
|
|
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20319 },
|
|
|
|
{ PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
|
board_20619 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver pdc_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pdc_ata_pci_tbl,
|
|
.probe = pdc_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
|
|
static int pdc_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct pdc_port_priv *pp;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = kmalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp) {
|
|
rc = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
memset(pp, 0, sizeof(*pp));
|
|
|
|
pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
if (!pp->pkt) {
|
|
rc = -ENOMEM;
|
|
goto err_out_kfree;
|
|
}
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
|
|
err_out_kfree:
|
|
kfree(pp);
|
|
err_out:
|
|
ata_port_stop(ap);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void pdc_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
|
|
ap->private_data = NULL;
|
|
dma_free_coherent(dev, 128, pp->pkt, pp->pkt_dma);
|
|
kfree(pp);
|
|
ata_port_stop(ap);
|
|
}
|
|
|
|
|
|
static void pdc_reset_port(struct ata_port *ap)
|
|
{
|
|
void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_CTLSTAT;
|
|
unsigned int i;
|
|
u32 tmp;
|
|
|
|
for (i = 11; i > 0; i--) {
|
|
tmp = readl(mmio);
|
|
if (tmp & PDC_RESET)
|
|
break;
|
|
|
|
udelay(100);
|
|
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, mmio);
|
|
}
|
|
|
|
tmp &= ~PDC_RESET;
|
|
writel(tmp, mmio);
|
|
readl(mmio); /* flush */
|
|
}
|
|
|
|
static void pdc_phy_reset(struct ata_port *ap)
|
|
{
|
|
pdc_reset_port(ap);
|
|
sata_phy_reset(ap);
|
|
}
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return 0xffffffffU;
|
|
return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
|
|
u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct pdc_port_priv *pp = qc->ap->private_data;
|
|
unsigned int i;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
ata_qc_prep(qc);
|
|
/* fall through */
|
|
|
|
case ATA_PROT_NODATA:
|
|
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
|
|
qc->dev->devno, pp->pkt);
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
|
|
|
|
pdc_pkt_footer(&qc->tf, pp->pkt, i);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void pdc_eng_timeout(struct ata_port *ap)
|
|
{
|
|
u8 drv_stat;
|
|
struct ata_queued_cmd *qc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (!qc) {
|
|
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
|
|
ap->id);
|
|
goto out;
|
|
}
|
|
|
|
/* hack alert! We cannot use the supplied completion
|
|
* function from inside the ->eh_strategy_handler() thread.
|
|
* libata is the only user of ->eh_strategy_handler() in
|
|
* any kernel, so the default scsi_done() assumes it is
|
|
* not being called from the SCSI EH.
|
|
*/
|
|
qc->scsidone = scsi_finish_command;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
|
|
ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
|
|
break;
|
|
|
|
default:
|
|
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
|
|
|
|
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
|
|
ap->id, qc->tf.command, drv_stat);
|
|
|
|
ata_qc_complete(qc, drv_stat);
|
|
break;
|
|
}
|
|
|
|
out:
|
|
DPRINTK("EXIT\n");
|
|
}
|
|
|
|
static inline unsigned int pdc_host_intr( struct ata_port *ap,
|
|
struct ata_queued_cmd *qc)
|
|
{
|
|
u8 status;
|
|
unsigned int handled = 0, have_err = 0;
|
|
u32 tmp;
|
|
void *mmio = (void *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
|
|
|
|
tmp = readl(mmio);
|
|
if (tmp & PDC_ERR_MASK) {
|
|
have_err = 1;
|
|
pdc_reset_port(ap);
|
|
}
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
status = ata_wait_idle(ap);
|
|
if (have_err)
|
|
status |= ATA_ERR;
|
|
ata_qc_complete(qc, status);
|
|
handled = 1;
|
|
break;
|
|
|
|
default:
|
|
ap->stats.idle_irq++;
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void pdc_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct ata_host_set *host_set = ap->host_set;
|
|
void *mmio = host_set->mmio_base;
|
|
|
|
readl(mmio + PDC_INT_SEQMASK);
|
|
}
|
|
|
|
static irqreturn_t pdc_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
struct ata_port *ap;
|
|
u32 mask = 0;
|
|
unsigned int i, tmp;
|
|
unsigned int handled = 0;
|
|
void *mmio_base;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (!host_set || !host_set->mmio_base) {
|
|
VPRINTK("QUICK EXIT\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
mmio_base = host_set->mmio_base;
|
|
|
|
/* reading should also clear interrupts */
|
|
mask = readl(mmio_base + PDC_INT_SEQMASK);
|
|
|
|
if (mask == 0xffffffff) {
|
|
VPRINTK("QUICK EXIT 2\n");
|
|
return IRQ_NONE;
|
|
}
|
|
mask &= 0xffff; /* only 16 tags possible */
|
|
if (!mask) {
|
|
VPRINTK("QUICK EXIT 3\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
spin_lock(&host_set->lock);
|
|
|
|
writel(mask, mmio_base + PDC_INT_SEQMASK);
|
|
|
|
for (i = 0; i < host_set->n_ports; i++) {
|
|
VPRINTK("port %u\n", i);
|
|
ap = host_set->ports[i];
|
|
tmp = mask & (1 << (i + 1));
|
|
if (tmp && ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.ctl & ATA_NIEN)))
|
|
handled += pdc_host_intr(ap, qc);
|
|
}
|
|
}
|
|
|
|
spin_unlock(&host_set->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static inline void pdc_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
unsigned int port_no = ap->port_no;
|
|
u8 seq = (u8) (port_no + 1);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writel(0x00000001, ap->host_set->mmio_base + (seq * 4));
|
|
readl(ap->host_set->mmio_base + (seq * 4)); /* flush */
|
|
|
|
pp->pkt[2] = seq;
|
|
wmb(); /* flush PRD, pkt writes */
|
|
writel(pp->pkt_dma, (void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
readl((void *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
|
|
}
|
|
|
|
static int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
pdc_packet_start(qc);
|
|
return 0;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
BUG();
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_tf_load(ap, tf);
|
|
}
|
|
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_NODATA);
|
|
ata_exec_command(ap, tf);
|
|
}
|
|
|
|
|
|
static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base)
|
|
{
|
|
port->cmd_addr = base;
|
|
port->data_addr = base;
|
|
port->feature_addr =
|
|
port->error_addr = base + 0x4;
|
|
port->nsect_addr = base + 0x8;
|
|
port->lbal_addr = base + 0xc;
|
|
port->lbam_addr = base + 0x10;
|
|
port->lbah_addr = base + 0x14;
|
|
port->device_addr = base + 0x18;
|
|
port->command_addr =
|
|
port->status_addr = base + 0x1c;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x38;
|
|
}
|
|
|
|
|
|
static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
|
|
{
|
|
void *mmio = pe->mmio_base;
|
|
u32 tmp;
|
|
|
|
/*
|
|
* Except for the hotplug stuff, this is voodoo from the
|
|
* Promise driver. Label this entire section
|
|
* "TODO: figure out why we do this"
|
|
*/
|
|
|
|
/* change FIFO_SHD to 8 dwords, enable BMR_BURST */
|
|
tmp = readl(mmio + PDC_FLASH_CTL);
|
|
tmp |= 0x12000; /* bit 16 (fifo 8 dw) and 13 (bmr burst?) */
|
|
writel(tmp, mmio + PDC_FLASH_CTL);
|
|
|
|
/* clear plug/unplug flags for all ports */
|
|
tmp = readl(mmio + PDC_SATA_PLUG_CSR);
|
|
writel(tmp | 0xff, mmio + PDC_SATA_PLUG_CSR);
|
|
|
|
/* mask plug/unplug ints */
|
|
tmp = readl(mmio + PDC_SATA_PLUG_CSR);
|
|
writel(tmp | 0xff0000, mmio + PDC_SATA_PLUG_CSR);
|
|
|
|
/* reduce TBG clock to 133 Mhz. */
|
|
tmp = readl(mmio + PDC_TBG_MODE);
|
|
tmp &= ~0x30000; /* clear bit 17, 16*/
|
|
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
|
|
writel(tmp, mmio + PDC_TBG_MODE);
|
|
|
|
readl(mmio + PDC_TBG_MODE); /* flush */
|
|
msleep(10);
|
|
|
|
/* adjust slew rate control register. */
|
|
tmp = readl(mmio + PDC_SLEW_CTL);
|
|
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
|
|
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
|
|
writel(tmp, mmio + PDC_SLEW_CTL);
|
|
}
|
|
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
unsigned long base;
|
|
void *mmio_base;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
int pci_dev_busy = 0;
|
|
int rc;
|
|
|
|
if (!printed_version++)
|
|
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
|
|
|
|
/*
|
|
* If this driver happens to only be useful on Apple's K2, then
|
|
* we should check that here as it has a normal Serverworks ID
|
|
*/
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pci_dev_busy = 1;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
|
|
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (probe_ent == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
memset(probe_ent, 0, sizeof(*probe_ent));
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
mmio_base = ioremap(pci_resource_start(pdev, 3),
|
|
pci_resource_len(pdev, 3));
|
|
if (mmio_base == NULL) {
|
|
rc = -ENOMEM;
|
|
goto err_out_free_ent;
|
|
}
|
|
base = (unsigned long) mmio_base;
|
|
|
|
probe_ent->sht = pdc_port_info[board_idx].sht;
|
|
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
|
|
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
|
|
probe_ent->mwdma_mask = pdc_port_info[board_idx].mwdma_mask;
|
|
probe_ent->udma_mask = pdc_port_info[board_idx].udma_mask;
|
|
probe_ent->port_ops = pdc_port_info[board_idx].port_ops;
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = mmio_base;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
|
|
pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
|
|
|
|
probe_ent->port[0].scr_addr = base + 0x400;
|
|
probe_ent->port[1].scr_addr = base + 0x500;
|
|
|
|
/* notice 4-port boards */
|
|
switch (board_idx) {
|
|
case board_20319:
|
|
probe_ent->n_ports = 4;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
|
|
|
|
probe_ent->port[2].scr_addr = base + 0x600;
|
|
probe_ent->port[3].scr_addr = base + 0x700;
|
|
break;
|
|
case board_2037x:
|
|
probe_ent->n_ports = 2;
|
|
break;
|
|
case board_20619:
|
|
probe_ent->n_ports = 4;
|
|
|
|
pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
|
|
pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
|
|
|
|
probe_ent->port[2].scr_addr = base + 0x600;
|
|
probe_ent->port[3].scr_addr = base + 0x700;
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* initialize adapter */
|
|
pdc_host_init(board_idx, probe_ent);
|
|
|
|
/* FIXME: check ata_device_add return value */
|
|
ata_device_add(probe_ent);
|
|
kfree(probe_ent);
|
|
|
|
return 0;
|
|
|
|
err_out_free_ent:
|
|
kfree(probe_ent);
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
err_out:
|
|
if (!pci_dev_busy)
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int __init pdc_ata_init(void)
|
|
{
|
|
return pci_module_init(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit pdc_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(pdc_ata_init);
|
|
module_exit(pdc_ata_exit);
|