2329 lines
62 KiB
C
2329 lines
62 KiB
C
/*
|
|
* Network device driver for Cell Processor-Based Blade
|
|
*
|
|
* (C) Copyright IBM Corp. 2005
|
|
*
|
|
* Authors : Utz Bacher <utz.bacher@de.ibm.com>
|
|
* Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/compiler.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/in.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/device.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/types.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/workqueue.h>
|
|
#include <asm/bitops.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <net/checksum.h>
|
|
|
|
#include "spider_net.h"
|
|
|
|
MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com> and Jens Osterkamp " \
|
|
"<Jens.Osterkamp@de.ibm.com>");
|
|
MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(VERSION);
|
|
|
|
static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
|
|
static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
|
|
|
|
module_param(rx_descriptors, int, 0444);
|
|
module_param(tx_descriptors, int, 0444);
|
|
|
|
MODULE_PARM_DESC(rx_descriptors, "number of descriptors used " \
|
|
"in rx chains");
|
|
MODULE_PARM_DESC(tx_descriptors, "number of descriptors used " \
|
|
"in tx chain");
|
|
|
|
char spider_net_driver_name[] = "spidernet";
|
|
|
|
static struct pci_device_id spider_net_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SPIDER_NET,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, spider_net_pci_tbl);
|
|
|
|
/**
|
|
* spider_net_read_reg - reads an SMMIO register of a card
|
|
* @card: device structure
|
|
* @reg: register to read from
|
|
*
|
|
* returns the content of the specified SMMIO register.
|
|
*/
|
|
static inline u32
|
|
spider_net_read_reg(struct spider_net_card *card, u32 reg)
|
|
{
|
|
u32 value;
|
|
|
|
value = readl(card->regs + reg);
|
|
value = le32_to_cpu(value);
|
|
|
|
return value;
|
|
}
|
|
|
|
/**
|
|
* spider_net_write_reg - writes to an SMMIO register of a card
|
|
* @card: device structure
|
|
* @reg: register to write to
|
|
* @value: value to write into the specified SMMIO register
|
|
*/
|
|
static inline void
|
|
spider_net_write_reg(struct spider_net_card *card, u32 reg, u32 value)
|
|
{
|
|
value = cpu_to_le32(value);
|
|
writel(value, card->regs + reg);
|
|
}
|
|
|
|
/** spider_net_write_phy - write to phy register
|
|
* @netdev: adapter to be written to
|
|
* @mii_id: id of MII
|
|
* @reg: PHY register
|
|
* @val: value to be written to phy register
|
|
*
|
|
* spider_net_write_phy_register writes to an arbitrary PHY
|
|
* register via the spider GPCWOPCMD register. We assume the queue does
|
|
* not run full (not more than 15 commands outstanding).
|
|
**/
|
|
static void
|
|
spider_net_write_phy(struct net_device *netdev, int mii_id,
|
|
int reg, int val)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
u32 writevalue;
|
|
|
|
writevalue = ((u32)mii_id << 21) |
|
|
((u32)reg << 16) | ((u32)val);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GPCWOPCMD, writevalue);
|
|
}
|
|
|
|
/** spider_net_read_phy - read from phy register
|
|
* @netdev: network device to be read from
|
|
* @mii_id: id of MII
|
|
* @reg: PHY register
|
|
*
|
|
* Returns value read from PHY register
|
|
*
|
|
* spider_net_write_phy reads from an arbitrary PHY
|
|
* register via the spider GPCROPCMD register
|
|
**/
|
|
static int
|
|
spider_net_read_phy(struct net_device *netdev, int mii_id, int reg)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
u32 readvalue;
|
|
|
|
readvalue = ((u32)mii_id << 21) | ((u32)reg << 16);
|
|
spider_net_write_reg(card, SPIDER_NET_GPCROPCMD, readvalue);
|
|
|
|
/* we don't use semaphores to wait for an SPIDER_NET_GPROPCMPINT
|
|
* interrupt, as we poll for the completion of the read operation
|
|
* in spider_net_read_phy. Should take about 50 us */
|
|
do {
|
|
readvalue = spider_net_read_reg(card, SPIDER_NET_GPCROPCMD);
|
|
} while (readvalue & SPIDER_NET_GPREXEC);
|
|
|
|
readvalue &= SPIDER_NET_GPRDAT_MASK;
|
|
|
|
return readvalue;
|
|
}
|
|
|
|
/**
|
|
* spider_net_rx_irq_off - switch off rx irq on this spider card
|
|
* @card: device structure
|
|
*
|
|
* switches off rx irq by masking them out in the GHIINTnMSK register
|
|
*/
|
|
static void
|
|
spider_net_rx_irq_off(struct spider_net_card *card)
|
|
{
|
|
u32 regvalue;
|
|
|
|
regvalue = SPIDER_NET_INT0_MASK_VALUE & (~SPIDER_NET_RXINT);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
|
|
}
|
|
|
|
/**
|
|
* spider_net_rx_irq_on - switch on rx irq on this spider card
|
|
* @card: device structure
|
|
*
|
|
* switches on rx irq by enabling them in the GHIINTnMSK register
|
|
*/
|
|
static void
|
|
spider_net_rx_irq_on(struct spider_net_card *card)
|
|
{
|
|
u32 regvalue;
|
|
|
|
regvalue = SPIDER_NET_INT0_MASK_VALUE | SPIDER_NET_RXINT;
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, regvalue);
|
|
}
|
|
|
|
/**
|
|
* spider_net_set_promisc - sets the unicast address or the promiscuous mode
|
|
* @card: card structure
|
|
*
|
|
* spider_net_set_promisc sets the unicast destination address filter and
|
|
* thus either allows for non-promisc mode or promisc mode
|
|
*/
|
|
static void
|
|
spider_net_set_promisc(struct spider_net_card *card)
|
|
{
|
|
u32 macu, macl;
|
|
struct net_device *netdev = card->netdev;
|
|
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
/* clear destination entry 0 */
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, 0);
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, 0);
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
|
|
SPIDER_NET_PROMISC_VALUE);
|
|
} else {
|
|
macu = netdev->dev_addr[0];
|
|
macu <<= 8;
|
|
macu |= netdev->dev_addr[1];
|
|
memcpy(&macl, &netdev->dev_addr[2], sizeof(macl));
|
|
|
|
macu |= SPIDER_NET_UA_DESCR_VALUE;
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR, macu);
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUAFILnR + 0x04, macl);
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R,
|
|
SPIDER_NET_NONPROMISC_VALUE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spider_net_get_mac_address - read mac address from spider card
|
|
* @card: device structure
|
|
*
|
|
* reads MAC address from GMACUNIMACU and GMACUNIMACL registers
|
|
*/
|
|
static int
|
|
spider_net_get_mac_address(struct net_device *netdev)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
u32 macl, macu;
|
|
|
|
macl = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACL);
|
|
macu = spider_net_read_reg(card, SPIDER_NET_GMACUNIMACU);
|
|
|
|
netdev->dev_addr[0] = (macu >> 24) & 0xff;
|
|
netdev->dev_addr[1] = (macu >> 16) & 0xff;
|
|
netdev->dev_addr[2] = (macu >> 8) & 0xff;
|
|
netdev->dev_addr[3] = macu & 0xff;
|
|
netdev->dev_addr[4] = (macl >> 8) & 0xff;
|
|
netdev->dev_addr[5] = macl & 0xff;
|
|
|
|
if (!is_valid_ether_addr(&netdev->dev_addr[0]))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_get_descr_status -- returns the status of a descriptor
|
|
* @descr: descriptor to look at
|
|
*
|
|
* returns the status as in the dmac_cmd_status field of the descriptor
|
|
*/
|
|
static inline int
|
|
spider_net_get_descr_status(struct spider_net_descr *descr)
|
|
{
|
|
return descr->dmac_cmd_status & SPIDER_NET_DESCR_IND_PROC_MASK;
|
|
}
|
|
|
|
/**
|
|
* spider_net_free_chain - free descriptor chain
|
|
* @card: card structure
|
|
* @chain: address of chain
|
|
*
|
|
*/
|
|
static void
|
|
spider_net_free_chain(struct spider_net_card *card,
|
|
struct spider_net_descr_chain *chain)
|
|
{
|
|
struct spider_net_descr *descr;
|
|
|
|
for (descr = chain->tail; !descr->bus_addr; descr = descr->next) {
|
|
pci_unmap_single(card->pdev, descr->bus_addr,
|
|
SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL);
|
|
descr->bus_addr = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spider_net_init_chain - links descriptor chain
|
|
* @card: card structure
|
|
* @chain: address of chain
|
|
* @start_descr: address of descriptor array
|
|
* @no: number of descriptors
|
|
*
|
|
* we manage a circular list that mirrors the hardware structure,
|
|
* except that the hardware uses bus addresses.
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*/
|
|
static int
|
|
spider_net_init_chain(struct spider_net_card *card,
|
|
struct spider_net_descr_chain *chain,
|
|
struct spider_net_descr *start_descr,
|
|
int no)
|
|
{
|
|
int i;
|
|
struct spider_net_descr *descr;
|
|
dma_addr_t buf;
|
|
|
|
descr = start_descr;
|
|
memset(descr, 0, sizeof(*descr) * no);
|
|
|
|
/* set up the hardware pointers in each descriptor */
|
|
for (i=0; i<no; i++, descr++) {
|
|
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
|
|
|
|
buf = pci_map_single(card->pdev, descr,
|
|
SPIDER_NET_DESCR_SIZE,
|
|
PCI_DMA_BIDIRECTIONAL);
|
|
|
|
if (pci_dma_mapping_error(buf))
|
|
goto iommu_error;
|
|
|
|
descr->bus_addr = buf;
|
|
descr->next = descr + 1;
|
|
descr->prev = descr - 1;
|
|
|
|
}
|
|
/* do actual circular list */
|
|
(descr-1)->next = start_descr;
|
|
start_descr->prev = descr-1;
|
|
|
|
spin_lock_init(&chain->lock);
|
|
chain->head = start_descr;
|
|
chain->tail = start_descr;
|
|
|
|
return 0;
|
|
|
|
iommu_error:
|
|
descr = start_descr;
|
|
for (i=0; i < no; i++, descr++)
|
|
if (descr->bus_addr)
|
|
pci_unmap_single(card->pdev, descr->bus_addr,
|
|
SPIDER_NET_DESCR_SIZE,
|
|
PCI_DMA_BIDIRECTIONAL);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/**
|
|
* spider_net_free_rx_chain_contents - frees descr contents in rx chain
|
|
* @card: card structure
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*/
|
|
static void
|
|
spider_net_free_rx_chain_contents(struct spider_net_card *card)
|
|
{
|
|
struct spider_net_descr *descr;
|
|
|
|
descr = card->rx_chain.head;
|
|
do {
|
|
if (descr->skb) {
|
|
dev_kfree_skb(descr->skb);
|
|
pci_unmap_single(card->pdev, descr->buf_addr,
|
|
SPIDER_NET_MAX_FRAME,
|
|
PCI_DMA_BIDIRECTIONAL);
|
|
}
|
|
descr = descr->next;
|
|
} while (descr != card->rx_chain.head);
|
|
}
|
|
|
|
/**
|
|
* spider_net_prepare_rx_descr - reinitializes a rx descriptor
|
|
* @card: card structure
|
|
* @descr: descriptor to re-init
|
|
*
|
|
* return 0 on succes, <0 on failure
|
|
*
|
|
* allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
|
|
* Activate the descriptor state-wise
|
|
*/
|
|
static int
|
|
spider_net_prepare_rx_descr(struct spider_net_card *card,
|
|
struct spider_net_descr *descr)
|
|
{
|
|
dma_addr_t buf;
|
|
int error = 0;
|
|
int offset;
|
|
int bufsize;
|
|
|
|
/* we need to round up the buffer size to a multiple of 128 */
|
|
bufsize = (SPIDER_NET_MAX_FRAME + SPIDER_NET_RXBUF_ALIGN - 1) &
|
|
(~(SPIDER_NET_RXBUF_ALIGN - 1));
|
|
|
|
/* and we need to have it 128 byte aligned, therefore we allocate a
|
|
* bit more */
|
|
/* allocate an skb */
|
|
descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
|
|
if (!descr->skb) {
|
|
if (netif_msg_rx_err(card) && net_ratelimit())
|
|
pr_err("Not enough memory to allocate rx buffer\n");
|
|
card->spider_stats.alloc_rx_skb_error++;
|
|
return -ENOMEM;
|
|
}
|
|
descr->buf_size = bufsize;
|
|
descr->result_size = 0;
|
|
descr->valid_size = 0;
|
|
descr->data_status = 0;
|
|
descr->data_error = 0;
|
|
|
|
offset = ((unsigned long)descr->skb->data) &
|
|
(SPIDER_NET_RXBUF_ALIGN - 1);
|
|
if (offset)
|
|
skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
|
|
/* io-mmu-map the skb */
|
|
buf = pci_map_single(card->pdev, descr->skb->data,
|
|
SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
|
|
descr->buf_addr = buf;
|
|
if (pci_dma_mapping_error(buf)) {
|
|
dev_kfree_skb_any(descr->skb);
|
|
if (netif_msg_rx_err(card) && net_ratelimit())
|
|
pr_err("Could not iommu-map rx buffer\n");
|
|
card->spider_stats.rx_iommu_map_error++;
|
|
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
|
|
} else {
|
|
descr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
|
|
SPIDER_NET_DMAC_NOINTR_COMPLETE;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* spider_net_enable_rxchtails - sets RX dmac chain tail addresses
|
|
* @card: card structure
|
|
*
|
|
* spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the
|
|
* chip by writing to the appropriate register. DMA is enabled in
|
|
* spider_net_enable_rxdmac.
|
|
*/
|
|
static inline void
|
|
spider_net_enable_rxchtails(struct spider_net_card *card)
|
|
{
|
|
/* assume chain is aligned correctly */
|
|
spider_net_write_reg(card, SPIDER_NET_GDADCHA ,
|
|
card->rx_chain.tail->bus_addr);
|
|
}
|
|
|
|
/**
|
|
* spider_net_enable_rxdmac - enables a receive DMA controller
|
|
* @card: card structure
|
|
*
|
|
* spider_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
|
|
* in the GDADMACCNTR register
|
|
*/
|
|
static inline void
|
|
spider_net_enable_rxdmac(struct spider_net_card *card)
|
|
{
|
|
wmb();
|
|
spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
|
|
SPIDER_NET_DMA_RX_VALUE);
|
|
}
|
|
|
|
/**
|
|
* spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
|
|
* @card: card structure
|
|
*
|
|
* refills descriptors in the rx chain: allocates skbs and iommu-maps them.
|
|
*/
|
|
static void
|
|
spider_net_refill_rx_chain(struct spider_net_card *card)
|
|
{
|
|
struct spider_net_descr_chain *chain = &card->rx_chain;
|
|
unsigned long flags;
|
|
|
|
/* one context doing the refill (and a second context seeing that
|
|
* and omitting it) is ok. If called by NAPI, we'll be called again
|
|
* as spider_net_decode_one_descr is called several times. If some
|
|
* interrupt calls us, the NAPI is about to clean up anyway. */
|
|
if (!spin_trylock_irqsave(&chain->lock, flags))
|
|
return;
|
|
|
|
while (spider_net_get_descr_status(chain->head) ==
|
|
SPIDER_NET_DESCR_NOT_IN_USE) {
|
|
if (spider_net_prepare_rx_descr(card, chain->head))
|
|
break;
|
|
chain->head = chain->head->next;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&chain->lock, flags);
|
|
}
|
|
|
|
/**
|
|
* spider_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
|
|
* @card: card structure
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*/
|
|
static int
|
|
spider_net_alloc_rx_skbs(struct spider_net_card *card)
|
|
{
|
|
int result;
|
|
struct spider_net_descr_chain *chain;
|
|
|
|
result = -ENOMEM;
|
|
|
|
chain = &card->rx_chain;
|
|
/* put at least one buffer into the chain. if this fails,
|
|
* we've got a problem. if not, spider_net_refill_rx_chain
|
|
* will do the rest at the end of this function */
|
|
if (spider_net_prepare_rx_descr(card, chain->head))
|
|
goto error;
|
|
else
|
|
chain->head = chain->head->next;
|
|
|
|
/* this will allocate the rest of the rx buffers; if not, it's
|
|
* business as usual later on */
|
|
spider_net_refill_rx_chain(card);
|
|
spider_net_enable_rxdmac(card);
|
|
return 0;
|
|
|
|
error:
|
|
spider_net_free_rx_chain_contents(card);
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* spider_net_get_multicast_hash - generates hash for multicast filter table
|
|
* @addr: multicast address
|
|
*
|
|
* returns the hash value.
|
|
*
|
|
* spider_net_get_multicast_hash calculates a hash value for a given multicast
|
|
* address, that is used to set the multicast filter tables
|
|
*/
|
|
static u8
|
|
spider_net_get_multicast_hash(struct net_device *netdev, __u8 *addr)
|
|
{
|
|
u32 crc;
|
|
u8 hash;
|
|
char addr_for_crc[ETH_ALEN] = { 0, };
|
|
int i, bit;
|
|
|
|
for (i = 0; i < ETH_ALEN * 8; i++) {
|
|
bit = (addr[i / 8] >> (i % 8)) & 1;
|
|
addr_for_crc[ETH_ALEN - 1 - i / 8] += bit << (7 - (i % 8));
|
|
}
|
|
|
|
crc = crc32_be(~0, addr_for_crc, netdev->addr_len);
|
|
|
|
hash = (crc >> 27);
|
|
hash <<= 3;
|
|
hash |= crc & 7;
|
|
hash &= 0xff;
|
|
|
|
return hash;
|
|
}
|
|
|
|
/**
|
|
* spider_net_set_multi - sets multicast addresses and promisc flags
|
|
* @netdev: interface device structure
|
|
*
|
|
* spider_net_set_multi configures multicast addresses as needed for the
|
|
* netdev interface. It also sets up multicast, allmulti and promisc
|
|
* flags appropriately
|
|
*/
|
|
static void
|
|
spider_net_set_multi(struct net_device *netdev)
|
|
{
|
|
struct dev_mc_list *mc;
|
|
u8 hash;
|
|
int i;
|
|
u32 reg;
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
unsigned long bitmask[SPIDER_NET_MULTICAST_HASHES / BITS_PER_LONG] =
|
|
{0, };
|
|
|
|
spider_net_set_promisc(card);
|
|
|
|
if (netdev->flags & IFF_ALLMULTI) {
|
|
for (i = 0; i < SPIDER_NET_MULTICAST_HASHES; i++) {
|
|
set_bit(i, bitmask);
|
|
}
|
|
goto write_hash;
|
|
}
|
|
|
|
/* well, we know, what the broadcast hash value is: it's xfd
|
|
hash = spider_net_get_multicast_hash(netdev, netdev->broadcast); */
|
|
set_bit(0xfd, bitmask);
|
|
|
|
for (mc = netdev->mc_list; mc; mc = mc->next) {
|
|
hash = spider_net_get_multicast_hash(netdev, mc->dmi_addr);
|
|
set_bit(hash, bitmask);
|
|
}
|
|
|
|
write_hash:
|
|
for (i = 0; i < SPIDER_NET_MULTICAST_HASHES / 4; i++) {
|
|
reg = 0;
|
|
if (test_bit(i * 4, bitmask))
|
|
reg += 0x08;
|
|
reg <<= 8;
|
|
if (test_bit(i * 4 + 1, bitmask))
|
|
reg += 0x08;
|
|
reg <<= 8;
|
|
if (test_bit(i * 4 + 2, bitmask))
|
|
reg += 0x08;
|
|
reg <<= 8;
|
|
if (test_bit(i * 4 + 3, bitmask))
|
|
reg += 0x08;
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GMRMHFILnR + i * 4, reg);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spider_net_disable_rxdmac - disables the receive DMA controller
|
|
* @card: card structure
|
|
*
|
|
* spider_net_disable_rxdmac terminates processing on the DMA controller by
|
|
* turing off DMA and issueing a force end
|
|
*/
|
|
static void
|
|
spider_net_disable_rxdmac(struct spider_net_card *card)
|
|
{
|
|
spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
|
|
SPIDER_NET_DMA_RX_FEND_VALUE);
|
|
}
|
|
|
|
/**
|
|
* spider_net_prepare_tx_descr - fill tx descriptor with skb data
|
|
* @card: card structure
|
|
* @descr: descriptor structure to fill out
|
|
* @skb: packet to use
|
|
*
|
|
* returns 0 on success, <0 on failure.
|
|
*
|
|
* fills out the descriptor structure with skb data and len. Copies data,
|
|
* if needed (32bit DMA!)
|
|
*/
|
|
static int
|
|
spider_net_prepare_tx_descr(struct spider_net_card *card,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct spider_net_descr *descr;
|
|
dma_addr_t buf;
|
|
unsigned long flags;
|
|
|
|
buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
|
|
if (pci_dma_mapping_error(buf)) {
|
|
if (netif_msg_tx_err(card) && net_ratelimit())
|
|
pr_err("could not iommu-map packet (%p, %i). "
|
|
"Dropping packet\n", skb->data, skb->len);
|
|
card->spider_stats.tx_iommu_map_error++;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
spin_lock_irqsave(&card->tx_chain.lock, flags);
|
|
descr = card->tx_chain.head;
|
|
card->tx_chain.head = descr->next;
|
|
|
|
descr->buf_addr = buf;
|
|
descr->buf_size = skb->len;
|
|
descr->next_descr_addr = 0;
|
|
descr->skb = skb;
|
|
descr->data_status = 0;
|
|
|
|
descr->dmac_cmd_status =
|
|
SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
|
|
spin_unlock_irqrestore(&card->tx_chain.lock, flags);
|
|
|
|
if (skb->protocol == htons(ETH_P_IP))
|
|
switch (skb->nh.iph->protocol) {
|
|
case IPPROTO_TCP:
|
|
descr->dmac_cmd_status |= SPIDER_NET_DMAC_TCP;
|
|
break;
|
|
case IPPROTO_UDP:
|
|
descr->dmac_cmd_status |= SPIDER_NET_DMAC_UDP;
|
|
break;
|
|
}
|
|
|
|
/* Chain the bus address, so that the DMA engine finds this descr. */
|
|
descr->prev->next_descr_addr = descr->bus_addr;
|
|
|
|
card->netdev->trans_start = jiffies; /* set netdev watchdog timer */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
spider_net_set_low_watermark(struct spider_net_card *card)
|
|
{
|
|
unsigned long flags;
|
|
int status;
|
|
int cnt=0;
|
|
int i;
|
|
struct spider_net_descr *descr = card->tx_chain.tail;
|
|
|
|
/* Measure the length of the queue. Measurement does not
|
|
* need to be precise -- does not need a lock. */
|
|
while (descr != card->tx_chain.head) {
|
|
status = descr->dmac_cmd_status & SPIDER_NET_DESCR_NOT_IN_USE;
|
|
if (status == SPIDER_NET_DESCR_NOT_IN_USE)
|
|
break;
|
|
descr = descr->next;
|
|
cnt++;
|
|
}
|
|
|
|
/* If TX queue is short, don't even bother with interrupts */
|
|
if (cnt < card->num_tx_desc/4)
|
|
return cnt;
|
|
|
|
/* Set low-watermark 3/4th's of the way into the queue. */
|
|
descr = card->tx_chain.tail;
|
|
cnt = (cnt*3)/4;
|
|
for (i=0;i<cnt; i++)
|
|
descr = descr->next;
|
|
|
|
/* Set the new watermark, clear the old watermark */
|
|
spin_lock_irqsave(&card->tx_chain.lock, flags);
|
|
descr->dmac_cmd_status |= SPIDER_NET_DESCR_TXDESFLG;
|
|
if (card->low_watermark && card->low_watermark != descr)
|
|
card->low_watermark->dmac_cmd_status =
|
|
card->low_watermark->dmac_cmd_status & ~SPIDER_NET_DESCR_TXDESFLG;
|
|
card->low_watermark = descr;
|
|
spin_unlock_irqrestore(&card->tx_chain.lock, flags);
|
|
return cnt;
|
|
}
|
|
|
|
/**
|
|
* spider_net_release_tx_chain - processes sent tx descriptors
|
|
* @card: adapter structure
|
|
* @brutal: if set, don't care about whether descriptor seems to be in use
|
|
*
|
|
* returns 0 if the tx ring is empty, otherwise 1.
|
|
*
|
|
* spider_net_release_tx_chain releases the tx descriptors that spider has
|
|
* finished with (if non-brutal) or simply release tx descriptors (if brutal).
|
|
* If some other context is calling this function, we return 1 so that we're
|
|
* scheduled again (if we were scheduled) and will not loose initiative.
|
|
*/
|
|
static int
|
|
spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
|
|
{
|
|
struct spider_net_descr_chain *chain = &card->tx_chain;
|
|
struct spider_net_descr *descr;
|
|
struct sk_buff *skb;
|
|
u32 buf_addr;
|
|
unsigned long flags;
|
|
int status;
|
|
|
|
while (chain->tail != chain->head) {
|
|
spin_lock_irqsave(&chain->lock, flags);
|
|
descr = chain->tail;
|
|
|
|
status = spider_net_get_descr_status(descr);
|
|
switch (status) {
|
|
case SPIDER_NET_DESCR_COMPLETE:
|
|
card->netdev_stats.tx_packets++;
|
|
card->netdev_stats.tx_bytes += descr->skb->len;
|
|
break;
|
|
|
|
case SPIDER_NET_DESCR_CARDOWNED:
|
|
if (!brutal) {
|
|
spin_unlock_irqrestore(&chain->lock, flags);
|
|
return 1;
|
|
}
|
|
|
|
/* fallthrough, if we release the descriptors
|
|
* brutally (then we don't care about
|
|
* SPIDER_NET_DESCR_CARDOWNED) */
|
|
|
|
case SPIDER_NET_DESCR_RESPONSE_ERROR:
|
|
case SPIDER_NET_DESCR_PROTECTION_ERROR:
|
|
case SPIDER_NET_DESCR_FORCE_END:
|
|
if (netif_msg_tx_err(card))
|
|
pr_err("%s: forcing end of tx descriptor "
|
|
"with status x%02x\n",
|
|
card->netdev->name, status);
|
|
card->netdev_stats.tx_errors++;
|
|
break;
|
|
|
|
default:
|
|
card->netdev_stats.tx_dropped++;
|
|
if (!brutal) {
|
|
spin_unlock_irqrestore(&chain->lock, flags);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
chain->tail = descr->next;
|
|
descr->dmac_cmd_status |= SPIDER_NET_DESCR_NOT_IN_USE;
|
|
skb = descr->skb;
|
|
buf_addr = descr->buf_addr;
|
|
spin_unlock_irqrestore(&chain->lock, flags);
|
|
|
|
/* unmap the skb */
|
|
if (skb) {
|
|
pci_unmap_single(card->pdev, buf_addr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_kick_tx_dma - enables TX DMA processing
|
|
* @card: card structure
|
|
* @descr: descriptor address to enable TX processing at
|
|
*
|
|
* This routine will start the transmit DMA running if
|
|
* it is not already running. This routine ned only be
|
|
* called when queueing a new packet to an empty tx queue.
|
|
* Writes the current tx chain head as start address
|
|
* of the tx descriptor chain and enables the transmission
|
|
* DMA engine.
|
|
*/
|
|
static inline void
|
|
spider_net_kick_tx_dma(struct spider_net_card *card)
|
|
{
|
|
struct spider_net_descr *descr;
|
|
|
|
if (spider_net_read_reg(card, SPIDER_NET_GDTDMACCNTR) &
|
|
SPIDER_NET_TX_DMA_EN)
|
|
goto out;
|
|
|
|
descr = card->tx_chain.tail;
|
|
for (;;) {
|
|
if (spider_net_get_descr_status(descr) ==
|
|
SPIDER_NET_DESCR_CARDOWNED) {
|
|
spider_net_write_reg(card, SPIDER_NET_GDTDCHA,
|
|
descr->bus_addr);
|
|
spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
|
|
SPIDER_NET_DMA_TX_VALUE);
|
|
break;
|
|
}
|
|
if (descr == card->tx_chain.head)
|
|
break;
|
|
descr = descr->next;
|
|
}
|
|
|
|
out:
|
|
mod_timer(&card->tx_timer, jiffies + SPIDER_NET_TX_TIMER);
|
|
}
|
|
|
|
/**
|
|
* spider_net_xmit - transmits a frame over the device
|
|
* @skb: packet to send out
|
|
* @netdev: interface device structure
|
|
*
|
|
* returns 0 on success, !0 on failure
|
|
*/
|
|
static int
|
|
spider_net_xmit(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
int cnt;
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
struct spider_net_descr_chain *chain = &card->tx_chain;
|
|
|
|
spider_net_release_tx_chain(card, 0);
|
|
|
|
if ((chain->head->next == chain->tail->prev) ||
|
|
(spider_net_prepare_tx_descr(card, skb) != 0)) {
|
|
|
|
card->netdev_stats.tx_dropped++;
|
|
netif_stop_queue(netdev);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
cnt = spider_net_set_low_watermark(card);
|
|
if (cnt < 5)
|
|
spider_net_kick_tx_dma(card);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/**
|
|
* spider_net_cleanup_tx_ring - cleans up the TX ring
|
|
* @card: card structure
|
|
*
|
|
* spider_net_cleanup_tx_ring is called by either the tx_timer
|
|
* or from the NAPI polling routine.
|
|
* This routine releases resources associted with transmitted
|
|
* packets, including updating the queue tail pointer.
|
|
*/
|
|
static void
|
|
spider_net_cleanup_tx_ring(struct spider_net_card *card)
|
|
{
|
|
if ((spider_net_release_tx_chain(card, 0) != 0) &&
|
|
(card->netdev->flags & IFF_UP)) {
|
|
spider_net_kick_tx_dma(card);
|
|
netif_wake_queue(card->netdev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spider_net_do_ioctl - called for device ioctls
|
|
* @netdev: interface device structure
|
|
* @ifr: request parameter structure for ioctl
|
|
* @cmd: command code for ioctl
|
|
*
|
|
* returns 0 on success, <0 on failure. Currently, we have no special ioctls.
|
|
* -EOPNOTSUPP is returned, if an unknown ioctl was requested
|
|
*/
|
|
static int
|
|
spider_net_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
|
|
* @descr: descriptor to process
|
|
* @card: card structure
|
|
* @napi: whether caller is in NAPI context
|
|
*
|
|
* returns 1 on success, 0 if no packet was passed to the stack
|
|
*
|
|
* iommu-unmaps the skb, fills out skb structure and passes the data to the
|
|
* stack. The descriptor state is not changed.
|
|
*/
|
|
static int
|
|
spider_net_pass_skb_up(struct spider_net_descr *descr,
|
|
struct spider_net_card *card, int napi)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct net_device *netdev;
|
|
u32 data_status, data_error;
|
|
|
|
data_status = descr->data_status;
|
|
data_error = descr->data_error;
|
|
|
|
netdev = card->netdev;
|
|
|
|
/* unmap descriptor */
|
|
pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
/* the cases we'll throw away the packet immediately */
|
|
if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
|
|
if (netif_msg_rx_err(card))
|
|
pr_err("error in received descriptor found, "
|
|
"data_status=x%08x, data_error=x%08x\n",
|
|
data_status, data_error);
|
|
card->spider_stats.rx_desc_error++;
|
|
return 0;
|
|
}
|
|
|
|
skb = descr->skb;
|
|
skb->dev = netdev;
|
|
skb_put(skb, descr->valid_size);
|
|
|
|
/* the card seems to add 2 bytes of junk in front
|
|
* of the ethernet frame */
|
|
#define SPIDER_MISALIGN 2
|
|
skb_pull(skb, SPIDER_MISALIGN);
|
|
skb->protocol = eth_type_trans(skb, netdev);
|
|
|
|
/* checksum offload */
|
|
if (card->options.rx_csum) {
|
|
if ( ( (data_status & SPIDER_NET_DATA_STATUS_CKSUM_MASK) ==
|
|
SPIDER_NET_DATA_STATUS_CKSUM_MASK) &&
|
|
!(data_error & SPIDER_NET_DATA_ERR_CKSUM_MASK))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
} else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
if (data_status & SPIDER_NET_VLAN_PACKET) {
|
|
/* further enhancements: HW-accel VLAN
|
|
* vlan_hwaccel_receive_skb
|
|
*/
|
|
}
|
|
|
|
/* pass skb up to stack */
|
|
if (napi)
|
|
netif_receive_skb(skb);
|
|
else
|
|
netif_rx_ni(skb);
|
|
|
|
/* update netdevice statistics */
|
|
card->netdev_stats.rx_packets++;
|
|
card->netdev_stats.rx_bytes += skb->len;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* spider_net_decode_one_descr - processes an rx descriptor
|
|
* @card: card structure
|
|
* @napi: whether caller is in NAPI context
|
|
*
|
|
* returns 1 if a packet has been sent to the stack, otherwise 0
|
|
*
|
|
* processes an rx descriptor by iommu-unmapping the data buffer and passing
|
|
* the packet up to the stack. This function is called in softirq
|
|
* context, e.g. either bottom half from interrupt or NAPI polling context
|
|
*/
|
|
static int
|
|
spider_net_decode_one_descr(struct spider_net_card *card, int napi)
|
|
{
|
|
struct spider_net_descr_chain *chain = &card->rx_chain;
|
|
struct spider_net_descr *descr = chain->tail;
|
|
int status;
|
|
int result;
|
|
|
|
status = spider_net_get_descr_status(descr);
|
|
|
|
if (status == SPIDER_NET_DESCR_CARDOWNED) {
|
|
/* nothing in the descriptor yet */
|
|
result=0;
|
|
goto out;
|
|
}
|
|
|
|
if (status == SPIDER_NET_DESCR_NOT_IN_USE) {
|
|
/* not initialized yet, the ring must be empty */
|
|
spider_net_refill_rx_chain(card);
|
|
spider_net_enable_rxdmac(card);
|
|
result=0;
|
|
goto out;
|
|
}
|
|
|
|
/* descriptor definitively used -- move on tail */
|
|
chain->tail = descr->next;
|
|
|
|
result = 0;
|
|
if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
|
|
(status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
|
|
(status == SPIDER_NET_DESCR_FORCE_END) ) {
|
|
if (netif_msg_rx_err(card))
|
|
pr_err("%s: dropping RX descriptor with state %d\n",
|
|
card->netdev->name, status);
|
|
card->netdev_stats.rx_dropped++;
|
|
pci_unmap_single(card->pdev, descr->buf_addr,
|
|
SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_irq(descr->skb);
|
|
goto refill;
|
|
}
|
|
|
|
if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
|
|
(status != SPIDER_NET_DESCR_FRAME_END) ) {
|
|
if (netif_msg_rx_err(card)) {
|
|
pr_err("%s: RX descriptor with state %d\n",
|
|
card->netdev->name, status);
|
|
card->spider_stats.rx_desc_unk_state++;
|
|
}
|
|
goto refill;
|
|
}
|
|
|
|
/* ok, we've got a packet in descr */
|
|
result = spider_net_pass_skb_up(descr, card, napi);
|
|
refill:
|
|
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
|
|
/* change the descriptor state: */
|
|
if (!napi)
|
|
spider_net_refill_rx_chain(card);
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* spider_net_poll - NAPI poll function called by the stack to return packets
|
|
* @netdev: interface device structure
|
|
* @budget: number of packets we can pass to the stack at most
|
|
*
|
|
* returns 0 if no more packets available to the driver/stack. Returns 1,
|
|
* if the quota is exceeded, but the driver has still packets.
|
|
*
|
|
* spider_net_poll returns all packets from the rx descriptors to the stack
|
|
* (using netif_receive_skb). If all/enough packets are up, the driver
|
|
* reenables interrupts and returns 0. If not, 1 is returned.
|
|
*/
|
|
static int
|
|
spider_net_poll(struct net_device *netdev, int *budget)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
int packets_to_do, packets_done = 0;
|
|
int no_more_packets = 0;
|
|
|
|
spider_net_cleanup_tx_ring(card);
|
|
packets_to_do = min(*budget, netdev->quota);
|
|
|
|
while (packets_to_do) {
|
|
if (spider_net_decode_one_descr(card, 1)) {
|
|
packets_done++;
|
|
packets_to_do--;
|
|
} else {
|
|
/* no more packets for the stack */
|
|
no_more_packets = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
netdev->quota -= packets_done;
|
|
*budget -= packets_done;
|
|
spider_net_refill_rx_chain(card);
|
|
|
|
/* if all packets are in the stack, enable interrupts and return 0 */
|
|
/* if not, return 1 */
|
|
if (no_more_packets) {
|
|
netif_rx_complete(netdev);
|
|
spider_net_rx_irq_on(card);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* spider_net_vlan_rx_reg - initializes VLAN structures in the driver and card
|
|
* @netdev: interface device structure
|
|
* @grp: vlan_group structure that is registered (NULL on destroying interface)
|
|
*/
|
|
static void
|
|
spider_net_vlan_rx_reg(struct net_device *netdev, struct vlan_group *grp)
|
|
{
|
|
/* further enhancement... yet to do */
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* spider_net_vlan_rx_add - adds VLAN id to the card filter
|
|
* @netdev: interface device structure
|
|
* @vid: VLAN id to add
|
|
*/
|
|
static void
|
|
spider_net_vlan_rx_add(struct net_device *netdev, uint16_t vid)
|
|
{
|
|
/* further enhancement... yet to do */
|
|
/* add vid to card's VLAN filter table */
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* spider_net_vlan_rx_kill - removes VLAN id to the card filter
|
|
* @netdev: interface device structure
|
|
* @vid: VLAN id to remove
|
|
*/
|
|
static void
|
|
spider_net_vlan_rx_kill(struct net_device *netdev, uint16_t vid)
|
|
{
|
|
/* further enhancement... yet to do */
|
|
/* remove vid from card's VLAN filter table */
|
|
}
|
|
|
|
/**
|
|
* spider_net_get_stats - get interface statistics
|
|
* @netdev: interface device structure
|
|
*
|
|
* returns the interface statistics residing in the spider_net_card struct
|
|
*/
|
|
static struct net_device_stats *
|
|
spider_net_get_stats(struct net_device *netdev)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
struct net_device_stats *stats = &card->netdev_stats;
|
|
return stats;
|
|
}
|
|
|
|
/**
|
|
* spider_net_change_mtu - changes the MTU of an interface
|
|
* @netdev: interface device structure
|
|
* @new_mtu: new MTU value
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*/
|
|
static int
|
|
spider_net_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
/* no need to re-alloc skbs or so -- the max mtu is about 2.3k
|
|
* and mtu is outbound only anyway */
|
|
if ( (new_mtu < SPIDER_NET_MIN_MTU ) ||
|
|
(new_mtu > SPIDER_NET_MAX_MTU) )
|
|
return -EINVAL;
|
|
netdev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_set_mac - sets the MAC of an interface
|
|
* @netdev: interface device structure
|
|
* @ptr: pointer to new MAC address
|
|
*
|
|
* Returns 0 on success, <0 on failure. Currently, we don't support this
|
|
* and will always return EOPNOTSUPP.
|
|
*/
|
|
static int
|
|
spider_net_set_mac(struct net_device *netdev, void *p)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
u32 macl, macu, regvalue;
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
/* switch off GMACTPE and GMACRPE */
|
|
regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
|
|
regvalue &= ~((1 << 5) | (1 << 6));
|
|
spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
|
|
|
|
/* write mac */
|
|
macu = (addr->sa_data[0]<<24) + (addr->sa_data[1]<<16) +
|
|
(addr->sa_data[2]<<8) + (addr->sa_data[3]);
|
|
macl = (addr->sa_data[4]<<8) + (addr->sa_data[5]);
|
|
spider_net_write_reg(card, SPIDER_NET_GMACUNIMACU, macu);
|
|
spider_net_write_reg(card, SPIDER_NET_GMACUNIMACL, macl);
|
|
|
|
/* switch GMACTPE and GMACRPE back on */
|
|
regvalue = spider_net_read_reg(card, SPIDER_NET_GMACOPEMD);
|
|
regvalue |= ((1 << 5) | (1 << 6));
|
|
spider_net_write_reg(card, SPIDER_NET_GMACOPEMD, regvalue);
|
|
|
|
spider_net_set_promisc(card);
|
|
|
|
/* look up, whether we have been successful */
|
|
if (spider_net_get_mac_address(netdev))
|
|
return -EADDRNOTAVAIL;
|
|
if (memcmp(netdev->dev_addr,addr->sa_data,netdev->addr_len))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_handle_rxram_full - cleans up RX ring upon RX RAM full interrupt
|
|
* @card: card structure
|
|
*
|
|
* spider_net_handle_rxram_full empties the RX ring so that spider can put
|
|
* more packets in it and empty its RX RAM. This is called in bottom half
|
|
* context
|
|
*/
|
|
static void
|
|
spider_net_handle_rxram_full(struct spider_net_card *card)
|
|
{
|
|
while (spider_net_decode_one_descr(card, 0))
|
|
;
|
|
spider_net_enable_rxchtails(card);
|
|
spider_net_enable_rxdmac(card);
|
|
netif_rx_schedule(card->netdev);
|
|
}
|
|
|
|
/**
|
|
* spider_net_handle_error_irq - handles errors raised by an interrupt
|
|
* @card: card structure
|
|
* @status_reg: interrupt status register 0 (GHIINT0STS)
|
|
*
|
|
* spider_net_handle_error_irq treats or ignores all error conditions
|
|
* found when an interrupt is presented
|
|
*/
|
|
static void
|
|
spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
|
|
{
|
|
u32 error_reg1, error_reg2;
|
|
u32 i;
|
|
int show_error = 1;
|
|
|
|
error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
|
|
error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
|
|
|
|
/* check GHIINT0STS ************************************/
|
|
if (status_reg)
|
|
for (i = 0; i < 32; i++)
|
|
if (status_reg & (1<<i))
|
|
switch (i)
|
|
{
|
|
/* let error_reg1 and error_reg2 evaluation decide, what to do
|
|
case SPIDER_NET_PHYINT:
|
|
case SPIDER_NET_GMAC2INT:
|
|
case SPIDER_NET_GMAC1INT:
|
|
case SPIDER_NET_GFIFOINT:
|
|
case SPIDER_NET_DMACINT:
|
|
case SPIDER_NET_GSYSINT:
|
|
break; */
|
|
|
|
case SPIDER_NET_GIPSINT:
|
|
show_error = 0;
|
|
break;
|
|
|
|
case SPIDER_NET_GPWOPCMPINT:
|
|
/* PHY write operation completed */
|
|
show_error = 0;
|
|
break;
|
|
case SPIDER_NET_GPROPCMPINT:
|
|
/* PHY read operation completed */
|
|
/* we don't use semaphores, as we poll for the completion
|
|
* of the read operation in spider_net_read_phy. Should take
|
|
* about 50 us */
|
|
show_error = 0;
|
|
break;
|
|
case SPIDER_NET_GPWFFINT:
|
|
/* PHY command queue full */
|
|
if (netif_msg_intr(card))
|
|
pr_err("PHY write queue full\n");
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* case SPIDER_NET_GRMDADRINT: not used. print a message */
|
|
/* case SPIDER_NET_GRMARPINT: not used. print a message */
|
|
/* case SPIDER_NET_GRMMPINT: not used. print a message */
|
|
|
|
case SPIDER_NET_GDTDEN0INT:
|
|
/* someone has set TX_DMA_EN to 0 */
|
|
show_error = 0;
|
|
break;
|
|
|
|
case SPIDER_NET_GDDDEN0INT: /* fallthrough */
|
|
case SPIDER_NET_GDCDEN0INT: /* fallthrough */
|
|
case SPIDER_NET_GDBDEN0INT: /* fallthrough */
|
|
case SPIDER_NET_GDADEN0INT:
|
|
/* someone has set RX_DMA_EN to 0 */
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* RX interrupts */
|
|
case SPIDER_NET_GDDFDCINT:
|
|
case SPIDER_NET_GDCFDCINT:
|
|
case SPIDER_NET_GDBFDCINT:
|
|
case SPIDER_NET_GDAFDCINT:
|
|
/* case SPIDER_NET_GDNMINT: not used. print a message */
|
|
/* case SPIDER_NET_GCNMINT: not used. print a message */
|
|
/* case SPIDER_NET_GBNMINT: not used. print a message */
|
|
/* case SPIDER_NET_GANMINT: not used. print a message */
|
|
/* case SPIDER_NET_GRFNMINT: not used. print a message */
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* TX interrupts */
|
|
case SPIDER_NET_GDTFDCINT:
|
|
show_error = 0;
|
|
break;
|
|
case SPIDER_NET_GTTEDINT:
|
|
show_error = 0;
|
|
break;
|
|
case SPIDER_NET_GDTDCEINT:
|
|
/* chain end. If a descriptor should be sent, kick off
|
|
* tx dma
|
|
if (card->tx_chain.tail != card->tx_chain.head)
|
|
spider_net_kick_tx_dma(card);
|
|
*/
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* case SPIDER_NET_G1TMCNTINT: not used. print a message */
|
|
/* case SPIDER_NET_GFREECNTINT: not used. print a message */
|
|
}
|
|
|
|
/* check GHIINT1STS ************************************/
|
|
if (error_reg1)
|
|
for (i = 0; i < 32; i++)
|
|
if (error_reg1 & (1<<i))
|
|
switch (i)
|
|
{
|
|
case SPIDER_NET_GTMFLLINT:
|
|
if (netif_msg_intr(card) && net_ratelimit())
|
|
pr_err("Spider TX RAM full\n");
|
|
show_error = 0;
|
|
break;
|
|
case SPIDER_NET_GRFDFLLINT: /* fallthrough */
|
|
case SPIDER_NET_GRFCFLLINT: /* fallthrough */
|
|
case SPIDER_NET_GRFBFLLINT: /* fallthrough */
|
|
case SPIDER_NET_GRFAFLLINT: /* fallthrough */
|
|
case SPIDER_NET_GRMFLLINT:
|
|
if (netif_msg_intr(card) && net_ratelimit())
|
|
pr_debug("Spider RX RAM full, incoming packets "
|
|
"might be discarded!\n");
|
|
spider_net_rx_irq_off(card);
|
|
tasklet_schedule(&card->rxram_full_tl);
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* case SPIDER_NET_GTMSHTINT: problem, print a message */
|
|
case SPIDER_NET_GDTINVDINT:
|
|
/* allrighty. tx from previous descr ok */
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* chain end */
|
|
case SPIDER_NET_GDDDCEINT: /* fallthrough */
|
|
case SPIDER_NET_GDCDCEINT: /* fallthrough */
|
|
case SPIDER_NET_GDBDCEINT: /* fallthrough */
|
|
case SPIDER_NET_GDADCEINT:
|
|
if (netif_msg_intr(card))
|
|
pr_err("got descriptor chain end interrupt, "
|
|
"restarting DMAC %c.\n",
|
|
'D'-(i-SPIDER_NET_GDDDCEINT)/3);
|
|
spider_net_refill_rx_chain(card);
|
|
spider_net_enable_rxdmac(card);
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* invalid descriptor */
|
|
case SPIDER_NET_GDDINVDINT: /* fallthrough */
|
|
case SPIDER_NET_GDCINVDINT: /* fallthrough */
|
|
case SPIDER_NET_GDBINVDINT: /* fallthrough */
|
|
case SPIDER_NET_GDAINVDINT:
|
|
/* could happen when rx chain is full */
|
|
spider_net_refill_rx_chain(card);
|
|
spider_net_enable_rxdmac(card);
|
|
show_error = 0;
|
|
break;
|
|
|
|
/* case SPIDER_NET_GDTRSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDDRSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDCRSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDBRSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDARSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDSERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDTPTERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDDPTERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDCPTERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDBPTERINT: problem, print a message */
|
|
/* case SPIDER_NET_GDAPTERINT: problem, print a message */
|
|
default:
|
|
show_error = 1;
|
|
break;
|
|
}
|
|
|
|
/* check GHIINT2STS ************************************/
|
|
if (error_reg2)
|
|
for (i = 0; i < 32; i++)
|
|
if (error_reg2 & (1<<i))
|
|
switch (i)
|
|
{
|
|
/* there is nothing we can (want to) do at this time. Log a
|
|
* message, we can switch on and off the specific values later on
|
|
case SPIDER_NET_GPROPERINT:
|
|
case SPIDER_NET_GMCTCRSNGINT:
|
|
case SPIDER_NET_GMCTLCOLINT:
|
|
case SPIDER_NET_GMCTTMOTINT:
|
|
case SPIDER_NET_GMCRCAERINT:
|
|
case SPIDER_NET_GMCRCALERINT:
|
|
case SPIDER_NET_GMCRALNERINT:
|
|
case SPIDER_NET_GMCROVRINT:
|
|
case SPIDER_NET_GMCRRNTINT:
|
|
case SPIDER_NET_GMCRRXERINT:
|
|
case SPIDER_NET_GTITCSERINT:
|
|
case SPIDER_NET_GTIFMTERINT:
|
|
case SPIDER_NET_GTIPKTRVKINT:
|
|
case SPIDER_NET_GTISPINGINT:
|
|
case SPIDER_NET_GTISADNGINT:
|
|
case SPIDER_NET_GTISPDNGINT:
|
|
case SPIDER_NET_GRIFMTERINT:
|
|
case SPIDER_NET_GRIPKTRVKINT:
|
|
case SPIDER_NET_GRISPINGINT:
|
|
case SPIDER_NET_GRISADNGINT:
|
|
case SPIDER_NET_GRISPDNGINT:
|
|
break;
|
|
*/
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if ((show_error) && (netif_msg_intr(card)))
|
|
pr_err("Got error interrupt on %s, GHIINT0STS = 0x%08x, "
|
|
"GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
|
|
card->netdev->name,
|
|
status_reg, error_reg1, error_reg2);
|
|
|
|
/* clear interrupt sources */
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT1STS, error_reg1);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT2STS, error_reg2);
|
|
}
|
|
|
|
/**
|
|
* spider_net_interrupt - interrupt handler for spider_net
|
|
* @irq: interupt number
|
|
* @ptr: pointer to net_device
|
|
* @regs: PU registers
|
|
*
|
|
* returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
|
|
* interrupt found raised by card.
|
|
*
|
|
* This is the interrupt handler, that turns off
|
|
* interrupts for this device and makes the stack poll the driver
|
|
*/
|
|
static irqreturn_t
|
|
spider_net_interrupt(int irq, void *ptr)
|
|
{
|
|
struct net_device *netdev = ptr;
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
u32 status_reg;
|
|
|
|
status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
|
|
|
|
if (!status_reg)
|
|
return IRQ_NONE;
|
|
|
|
if (status_reg & SPIDER_NET_RXINT ) {
|
|
spider_net_rx_irq_off(card);
|
|
netif_rx_schedule(netdev);
|
|
}
|
|
if (status_reg & SPIDER_NET_TXINT)
|
|
netif_rx_schedule(netdev);
|
|
|
|
if (status_reg & SPIDER_NET_ERRINT )
|
|
spider_net_handle_error_irq(card, status_reg);
|
|
|
|
/* clear interrupt sources */
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT0STS, status_reg);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/**
|
|
* spider_net_poll_controller - artificial interrupt for netconsole etc.
|
|
* @netdev: interface device structure
|
|
*
|
|
* see Documentation/networking/netconsole.txt
|
|
*/
|
|
static void
|
|
spider_net_poll_controller(struct net_device *netdev)
|
|
{
|
|
disable_irq(netdev->irq);
|
|
spider_net_interrupt(netdev->irq, netdev);
|
|
enable_irq(netdev->irq);
|
|
}
|
|
#endif /* CONFIG_NET_POLL_CONTROLLER */
|
|
|
|
/**
|
|
* spider_net_init_card - initializes the card
|
|
* @card: card structure
|
|
*
|
|
* spider_net_init_card initializes the card so that other registers can
|
|
* be used
|
|
*/
|
|
static void
|
|
spider_net_init_card(struct spider_net_card *card)
|
|
{
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_STOP_VALUE);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_RUN_VALUE);
|
|
}
|
|
|
|
/**
|
|
* spider_net_enable_card - enables the card by setting all kinds of regs
|
|
* @card: card structure
|
|
*
|
|
* spider_net_enable_card sets a lot of SMMIO registers to enable the device
|
|
*/
|
|
static void
|
|
spider_net_enable_card(struct spider_net_card *card)
|
|
{
|
|
int i;
|
|
/* the following array consists of (register),(value) pairs
|
|
* that are set in this function. A register of 0 ends the list */
|
|
u32 regs[][2] = {
|
|
{ SPIDER_NET_GRESUMINTNUM, 0 },
|
|
{ SPIDER_NET_GREINTNUM, 0 },
|
|
|
|
/* set interrupt frame number registers */
|
|
/* clear the single DMA engine registers first */
|
|
{ SPIDER_NET_GFAFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
|
|
{ SPIDER_NET_GFBFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
|
|
{ SPIDER_NET_GFCFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
|
|
{ SPIDER_NET_GFDFRMNUM, SPIDER_NET_GFXFRAMES_VALUE },
|
|
/* then set, what we really need */
|
|
{ SPIDER_NET_GFFRMNUM, SPIDER_NET_FRAMENUM_VALUE },
|
|
|
|
/* timer counter registers and stuff */
|
|
{ SPIDER_NET_GFREECNNUM, 0 },
|
|
{ SPIDER_NET_GONETIMENUM, 0 },
|
|
{ SPIDER_NET_GTOUTFRMNUM, 0 },
|
|
|
|
/* RX mode setting */
|
|
{ SPIDER_NET_GRXMDSET, SPIDER_NET_RXMODE_VALUE },
|
|
/* TX mode setting */
|
|
{ SPIDER_NET_GTXMDSET, SPIDER_NET_TXMODE_VALUE },
|
|
/* IPSEC mode setting */
|
|
{ SPIDER_NET_GIPSECINIT, SPIDER_NET_IPSECINIT_VALUE },
|
|
|
|
{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
|
|
|
|
{ SPIDER_NET_GMRWOLCTRL, 0 },
|
|
{ SPIDER_NET_GTESTMD, 0x10000000 },
|
|
{ SPIDER_NET_GTTQMSK, 0x00400040 },
|
|
|
|
{ SPIDER_NET_GMACINTEN, 0 },
|
|
|
|
/* flow control stuff */
|
|
{ SPIDER_NET_GMACAPAUSE, SPIDER_NET_MACAPAUSE_VALUE },
|
|
{ SPIDER_NET_GMACTXPAUSE, SPIDER_NET_TXPAUSE_VALUE },
|
|
|
|
{ SPIDER_NET_GMACBSTLMT, SPIDER_NET_BURSTLMT_VALUE },
|
|
{ 0, 0}
|
|
};
|
|
|
|
i = 0;
|
|
while (regs[i][0]) {
|
|
spider_net_write_reg(card, regs[i][0], regs[i][1]);
|
|
i++;
|
|
}
|
|
|
|
/* clear unicast filter table entries 1 to 14 */
|
|
for (i = 1; i <= 14; i++) {
|
|
spider_net_write_reg(card,
|
|
SPIDER_NET_GMRUAFILnR + i * 8,
|
|
0x00080000);
|
|
spider_net_write_reg(card,
|
|
SPIDER_NET_GMRUAFILnR + i * 8 + 4,
|
|
0x00000000);
|
|
}
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GMRUA0FIL15R, 0x08080000);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE);
|
|
|
|
/* set chain tail adress for RX chains and
|
|
* enable DMA */
|
|
spider_net_enable_rxchtails(card);
|
|
spider_net_enable_rxdmac(card);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GRXDMAEN, SPIDER_NET_WOL_VALUE);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GMACLENLMT,
|
|
SPIDER_NET_LENLMT_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_GMACMODE,
|
|
SPIDER_NET_MACMODE_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
|
|
SPIDER_NET_OPMODE_VALUE);
|
|
|
|
/* set interrupt mask registers */
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
|
|
SPIDER_NET_INT0_MASK_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
|
|
SPIDER_NET_INT1_MASK_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
|
|
SPIDER_NET_INT2_MASK_VALUE);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
|
|
SPIDER_NET_GDTBSTA);
|
|
}
|
|
|
|
/**
|
|
* spider_net_open - called upon ifonfig up
|
|
* @netdev: interface device structure
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*
|
|
* spider_net_open allocates all the descriptors and memory needed for
|
|
* operation, sets up multicast list and enables interrupts
|
|
*/
|
|
int
|
|
spider_net_open(struct net_device *netdev)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
struct spider_net_descr *descr;
|
|
int i, result;
|
|
|
|
result = -ENOMEM;
|
|
if (spider_net_init_chain(card, &card->tx_chain, card->descr,
|
|
card->num_tx_desc))
|
|
goto alloc_tx_failed;
|
|
|
|
card->low_watermark = NULL;
|
|
|
|
/* rx_chain is after tx_chain, so offset is descr + tx_count */
|
|
if (spider_net_init_chain(card, &card->rx_chain,
|
|
card->descr + card->num_tx_desc,
|
|
card->num_rx_desc))
|
|
goto alloc_rx_failed;
|
|
|
|
descr = card->rx_chain.head;
|
|
for (i=0; i < card->num_rx_desc; i++, descr++)
|
|
descr->next_descr_addr = descr->next->bus_addr;
|
|
|
|
/* allocate rx skbs */
|
|
if (spider_net_alloc_rx_skbs(card))
|
|
goto alloc_skbs_failed;
|
|
|
|
spider_net_set_multi(netdev);
|
|
|
|
/* further enhancement: setup hw vlan, if needed */
|
|
|
|
result = -EBUSY;
|
|
if (request_irq(netdev->irq, spider_net_interrupt,
|
|
IRQF_SHARED, netdev->name, netdev))
|
|
goto register_int_failed;
|
|
|
|
spider_net_enable_card(card);
|
|
|
|
netif_start_queue(netdev);
|
|
netif_carrier_on(netdev);
|
|
netif_poll_enable(netdev);
|
|
|
|
return 0;
|
|
|
|
register_int_failed:
|
|
spider_net_free_rx_chain_contents(card);
|
|
alloc_skbs_failed:
|
|
spider_net_free_chain(card, &card->rx_chain);
|
|
alloc_rx_failed:
|
|
spider_net_free_chain(card, &card->tx_chain);
|
|
alloc_tx_failed:
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* spider_net_setup_phy - setup PHY
|
|
* @card: card structure
|
|
*
|
|
* returns 0 on success, <0 on failure
|
|
*
|
|
* spider_net_setup_phy is used as part of spider_net_probe. Sets
|
|
* the PHY to 1000 Mbps
|
|
**/
|
|
static int
|
|
spider_net_setup_phy(struct spider_net_card *card)
|
|
{
|
|
struct mii_phy *phy = &card->phy;
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GDTDMASEL,
|
|
SPIDER_NET_DMASEL_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_GPCCTRL,
|
|
SPIDER_NET_PHY_CTRL_VALUE);
|
|
phy->mii_id = 1;
|
|
phy->dev = card->netdev;
|
|
phy->mdio_read = spider_net_read_phy;
|
|
phy->mdio_write = spider_net_write_phy;
|
|
|
|
mii_phy_probe(phy, phy->mii_id);
|
|
|
|
if (phy->def->ops->setup_forced)
|
|
phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL);
|
|
|
|
phy->def->ops->enable_fiber(phy);
|
|
|
|
phy->def->ops->read_link(phy);
|
|
pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
|
|
phy->speed, phy->duplex==1 ? "Full" : "Half");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_download_firmware - loads firmware into the adapter
|
|
* @card: card structure
|
|
* @firmware_ptr: pointer to firmware data
|
|
*
|
|
* spider_net_download_firmware loads the firmware data into the
|
|
* adapter. It assumes the length etc. to be allright.
|
|
*/
|
|
static int
|
|
spider_net_download_firmware(struct spider_net_card *card,
|
|
const void *firmware_ptr)
|
|
{
|
|
int sequencer, i;
|
|
const u32 *fw_ptr = firmware_ptr;
|
|
|
|
/* stop sequencers */
|
|
spider_net_write_reg(card, SPIDER_NET_GSINIT,
|
|
SPIDER_NET_STOP_SEQ_VALUE);
|
|
|
|
for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
|
|
sequencer++) {
|
|
spider_net_write_reg(card,
|
|
SPIDER_NET_GSnPRGADR + sequencer * 8, 0);
|
|
for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
|
|
spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
|
|
sequencer * 8, *fw_ptr);
|
|
fw_ptr++;
|
|
}
|
|
}
|
|
|
|
if (spider_net_read_reg(card, SPIDER_NET_GSINIT))
|
|
return -EIO;
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GSINIT,
|
|
SPIDER_NET_RUN_SEQ_VALUE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_init_firmware - reads in firmware parts
|
|
* @card: card structure
|
|
*
|
|
* Returns 0 on success, <0 on failure
|
|
*
|
|
* spider_net_init_firmware opens the sequencer firmware and does some basic
|
|
* checks. This function opens and releases the firmware structure. A call
|
|
* to download the firmware is performed before the release.
|
|
*
|
|
* Firmware format
|
|
* ===============
|
|
* spider_fw.bin is expected to be a file containing 6*1024*4 bytes, 4k being
|
|
* the program for each sequencer. Use the command
|
|
* tail -q -n +2 Seq_code1_0x088.txt Seq_code2_0x090.txt \
|
|
* Seq_code3_0x098.txt Seq_code4_0x0A0.txt Seq_code5_0x0A8.txt \
|
|
* Seq_code6_0x0B0.txt | xxd -r -p -c4 > spider_fw.bin
|
|
*
|
|
* to generate spider_fw.bin, if you have sequencer programs with something
|
|
* like the following contents for each sequencer:
|
|
* <ONE LINE COMMENT>
|
|
* <FIRST 4-BYTES-WORD FOR SEQUENCER>
|
|
* <SECOND 4-BYTES-WORD FOR SEQUENCER>
|
|
* ...
|
|
* <1024th 4-BYTES-WORD FOR SEQUENCER>
|
|
*/
|
|
static int
|
|
spider_net_init_firmware(struct spider_net_card *card)
|
|
{
|
|
struct firmware *firmware = NULL;
|
|
struct device_node *dn;
|
|
const u8 *fw_prop = NULL;
|
|
int err = -ENOENT;
|
|
int fw_size;
|
|
|
|
if (request_firmware((const struct firmware **)&firmware,
|
|
SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
|
|
if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
|
|
netif_msg_probe(card) ) {
|
|
pr_err("Incorrect size of spidernet firmware in " \
|
|
"filesystem. Looking in host firmware...\n");
|
|
goto try_host_fw;
|
|
}
|
|
err = spider_net_download_firmware(card, firmware->data);
|
|
|
|
release_firmware(firmware);
|
|
if (err)
|
|
goto try_host_fw;
|
|
|
|
goto done;
|
|
}
|
|
|
|
try_host_fw:
|
|
dn = pci_device_to_OF_node(card->pdev);
|
|
if (!dn)
|
|
goto out_err;
|
|
|
|
fw_prop = get_property(dn, "firmware", &fw_size);
|
|
if (!fw_prop)
|
|
goto out_err;
|
|
|
|
if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
|
|
netif_msg_probe(card) ) {
|
|
pr_err("Incorrect size of spidernet firmware in " \
|
|
"host firmware\n");
|
|
goto done;
|
|
}
|
|
|
|
err = spider_net_download_firmware(card, fw_prop);
|
|
|
|
done:
|
|
return err;
|
|
out_err:
|
|
if (netif_msg_probe(card))
|
|
pr_err("Couldn't find spidernet firmware in filesystem " \
|
|
"or host firmware\n");
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* spider_net_workaround_rxramfull - work around firmware bug
|
|
* @card: card structure
|
|
*
|
|
* no return value
|
|
**/
|
|
static void
|
|
spider_net_workaround_rxramfull(struct spider_net_card *card)
|
|
{
|
|
int i, sequencer = 0;
|
|
|
|
/* cancel reset */
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_RUN_VALUE);
|
|
|
|
/* empty sequencer data */
|
|
for (sequencer = 0; sequencer < SPIDER_NET_FIRMWARE_SEQS;
|
|
sequencer++) {
|
|
spider_net_write_reg(card, SPIDER_NET_GSnPRGADR +
|
|
sequencer * 8, 0x0);
|
|
for (i = 0; i < SPIDER_NET_FIRMWARE_SEQWORDS; i++) {
|
|
spider_net_write_reg(card, SPIDER_NET_GSnPRGDAT +
|
|
sequencer * 8, 0x0);
|
|
}
|
|
}
|
|
|
|
/* set sequencer operation */
|
|
spider_net_write_reg(card, SPIDER_NET_GSINIT, 0x000000fe);
|
|
|
|
/* reset */
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_STOP_VALUE);
|
|
}
|
|
|
|
/**
|
|
* spider_net_stop - called upon ifconfig down
|
|
* @netdev: interface device structure
|
|
*
|
|
* always returns 0
|
|
*/
|
|
int
|
|
spider_net_stop(struct net_device *netdev)
|
|
{
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
|
|
tasklet_kill(&card->rxram_full_tl);
|
|
netif_poll_disable(netdev);
|
|
netif_carrier_off(netdev);
|
|
netif_stop_queue(netdev);
|
|
del_timer_sync(&card->tx_timer);
|
|
|
|
/* disable/mask all interrupts */
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
|
|
spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
|
|
|
|
/* free_irq(netdev->irq, netdev);*/
|
|
free_irq(to_pci_dev(netdev->class_dev.dev)->irq, netdev);
|
|
|
|
spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
|
|
SPIDER_NET_DMA_TX_FEND_VALUE);
|
|
|
|
/* turn off DMA, force end */
|
|
spider_net_disable_rxdmac(card);
|
|
|
|
/* release chains */
|
|
spider_net_release_tx_chain(card, 1);
|
|
|
|
spider_net_free_chain(card, &card->tx_chain);
|
|
spider_net_free_chain(card, &card->rx_chain);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_tx_timeout_task - task scheduled by the watchdog timeout
|
|
* function (to be called not under interrupt status)
|
|
* @data: data, is interface device structure
|
|
*
|
|
* called as task when tx hangs, resets interface (if interface is up)
|
|
*/
|
|
static void
|
|
spider_net_tx_timeout_task(void *data)
|
|
{
|
|
struct net_device *netdev = data;
|
|
struct spider_net_card *card = netdev_priv(netdev);
|
|
|
|
if (!(netdev->flags & IFF_UP))
|
|
goto out;
|
|
|
|
netif_device_detach(netdev);
|
|
spider_net_stop(netdev);
|
|
|
|
spider_net_workaround_rxramfull(card);
|
|
spider_net_init_card(card);
|
|
|
|
if (spider_net_setup_phy(card))
|
|
goto out;
|
|
if (spider_net_init_firmware(card))
|
|
goto out;
|
|
|
|
spider_net_open(netdev);
|
|
spider_net_kick_tx_dma(card);
|
|
netif_device_attach(netdev);
|
|
|
|
out:
|
|
atomic_dec(&card->tx_timeout_task_counter);
|
|
}
|
|
|
|
/**
|
|
* spider_net_tx_timeout - called when the tx timeout watchdog kicks in.
|
|
* @netdev: interface device structure
|
|
*
|
|
* called, if tx hangs. Schedules a task that resets the interface
|
|
*/
|
|
static void
|
|
spider_net_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct spider_net_card *card;
|
|
|
|
card = netdev_priv(netdev);
|
|
atomic_inc(&card->tx_timeout_task_counter);
|
|
if (netdev->flags & IFF_UP)
|
|
schedule_work(&card->tx_timeout_task);
|
|
else
|
|
atomic_dec(&card->tx_timeout_task_counter);
|
|
card->spider_stats.tx_timeouts++;
|
|
}
|
|
|
|
/**
|
|
* spider_net_setup_netdev_ops - initialization of net_device operations
|
|
* @netdev: net_device structure
|
|
*
|
|
* fills out function pointers in the net_device structure
|
|
*/
|
|
static void
|
|
spider_net_setup_netdev_ops(struct net_device *netdev)
|
|
{
|
|
netdev->open = &spider_net_open;
|
|
netdev->stop = &spider_net_stop;
|
|
netdev->hard_start_xmit = &spider_net_xmit;
|
|
netdev->get_stats = &spider_net_get_stats;
|
|
netdev->set_multicast_list = &spider_net_set_multi;
|
|
netdev->set_mac_address = &spider_net_set_mac;
|
|
netdev->change_mtu = &spider_net_change_mtu;
|
|
netdev->do_ioctl = &spider_net_do_ioctl;
|
|
/* tx watchdog */
|
|
netdev->tx_timeout = &spider_net_tx_timeout;
|
|
netdev->watchdog_timeo = SPIDER_NET_WATCHDOG_TIMEOUT;
|
|
/* NAPI */
|
|
netdev->poll = &spider_net_poll;
|
|
netdev->weight = SPIDER_NET_NAPI_WEIGHT;
|
|
/* HW VLAN */
|
|
netdev->vlan_rx_register = &spider_net_vlan_rx_reg;
|
|
netdev->vlan_rx_add_vid = &spider_net_vlan_rx_add;
|
|
netdev->vlan_rx_kill_vid = &spider_net_vlan_rx_kill;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/* poll controller */
|
|
netdev->poll_controller = &spider_net_poll_controller;
|
|
#endif /* CONFIG_NET_POLL_CONTROLLER */
|
|
/* ethtool ops */
|
|
netdev->ethtool_ops = &spider_net_ethtool_ops;
|
|
}
|
|
|
|
/**
|
|
* spider_net_setup_netdev - initialization of net_device
|
|
* @card: card structure
|
|
*
|
|
* Returns 0 on success or <0 on failure
|
|
*
|
|
* spider_net_setup_netdev initializes the net_device structure
|
|
**/
|
|
static int
|
|
spider_net_setup_netdev(struct spider_net_card *card)
|
|
{
|
|
int result;
|
|
struct net_device *netdev = card->netdev;
|
|
struct device_node *dn;
|
|
struct sockaddr addr;
|
|
const u8 *mac;
|
|
|
|
SET_MODULE_OWNER(netdev);
|
|
SET_NETDEV_DEV(netdev, &card->pdev->dev);
|
|
|
|
pci_set_drvdata(card->pdev, netdev);
|
|
|
|
card->rxram_full_tl.data = (unsigned long) card;
|
|
card->rxram_full_tl.func =
|
|
(void (*)(unsigned long)) spider_net_handle_rxram_full;
|
|
init_timer(&card->tx_timer);
|
|
card->tx_timer.function =
|
|
(void (*)(unsigned long)) spider_net_cleanup_tx_ring;
|
|
card->tx_timer.data = (unsigned long) card;
|
|
netdev->irq = card->pdev->irq;
|
|
|
|
card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
|
|
|
|
card->num_tx_desc = tx_descriptors;
|
|
card->num_rx_desc = rx_descriptors;
|
|
|
|
spider_net_setup_netdev_ops(netdev);
|
|
|
|
netdev->features = NETIF_F_HW_CSUM | NETIF_F_LLTX;
|
|
/* some time: NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
|
|
* NETIF_F_HW_VLAN_FILTER */
|
|
|
|
netdev->irq = card->pdev->irq;
|
|
|
|
dn = pci_device_to_OF_node(card->pdev);
|
|
if (!dn)
|
|
return -EIO;
|
|
|
|
mac = get_property(dn, "local-mac-address", NULL);
|
|
if (!mac)
|
|
return -EIO;
|
|
memcpy(addr.sa_data, mac, ETH_ALEN);
|
|
|
|
result = spider_net_set_mac(netdev, &addr);
|
|
if ((result) && (netif_msg_probe(card)))
|
|
pr_err("Failed to set MAC address: %i\n", result);
|
|
|
|
result = register_netdev(netdev);
|
|
if (result) {
|
|
if (netif_msg_probe(card))
|
|
pr_err("Couldn't register net_device: %i\n",
|
|
result);
|
|
return result;
|
|
}
|
|
|
|
if (netif_msg_probe(card))
|
|
pr_info("Initialized device %s.\n", netdev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* spider_net_alloc_card - allocates net_device and card structure
|
|
*
|
|
* returns the card structure or NULL in case of errors
|
|
*
|
|
* the card and net_device structures are linked to each other
|
|
*/
|
|
static struct spider_net_card *
|
|
spider_net_alloc_card(void)
|
|
{
|
|
struct net_device *netdev;
|
|
struct spider_net_card *card;
|
|
size_t alloc_size;
|
|
|
|
alloc_size = sizeof (*card) +
|
|
sizeof (struct spider_net_descr) * rx_descriptors +
|
|
sizeof (struct spider_net_descr) * tx_descriptors;
|
|
netdev = alloc_etherdev(alloc_size);
|
|
if (!netdev)
|
|
return NULL;
|
|
|
|
card = netdev_priv(netdev);
|
|
card->netdev = netdev;
|
|
card->msg_enable = SPIDER_NET_DEFAULT_MSG;
|
|
INIT_WORK(&card->tx_timeout_task, spider_net_tx_timeout_task, netdev);
|
|
init_waitqueue_head(&card->waitq);
|
|
atomic_set(&card->tx_timeout_task_counter, 0);
|
|
|
|
return card;
|
|
}
|
|
|
|
/**
|
|
* spider_net_undo_pci_setup - releases PCI ressources
|
|
* @card: card structure
|
|
*
|
|
* spider_net_undo_pci_setup releases the mapped regions
|
|
*/
|
|
static void
|
|
spider_net_undo_pci_setup(struct spider_net_card *card)
|
|
{
|
|
iounmap(card->regs);
|
|
pci_release_regions(card->pdev);
|
|
}
|
|
|
|
/**
|
|
* spider_net_setup_pci_dev - sets up the device in terms of PCI operations
|
|
* @card: card structure
|
|
* @pdev: PCI device
|
|
*
|
|
* Returns the card structure or NULL if any errors occur
|
|
*
|
|
* spider_net_setup_pci_dev initializes pdev and together with the
|
|
* functions called in spider_net_open configures the device so that
|
|
* data can be transferred over it
|
|
* The net_device structure is attached to the card structure, if the
|
|
* function returns without error.
|
|
**/
|
|
static struct spider_net_card *
|
|
spider_net_setup_pci_dev(struct pci_dev *pdev)
|
|
{
|
|
struct spider_net_card *card;
|
|
unsigned long mmio_start, mmio_len;
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
pr_err("Couldn't enable PCI device\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
|
|
pr_err("Couldn't find proper PCI device base address.\n");
|
|
goto out_disable_dev;
|
|
}
|
|
|
|
if (pci_request_regions(pdev, spider_net_driver_name)) {
|
|
pr_err("Couldn't obtain PCI resources, aborting.\n");
|
|
goto out_disable_dev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
card = spider_net_alloc_card();
|
|
if (!card) {
|
|
pr_err("Couldn't allocate net_device structure, "
|
|
"aborting.\n");
|
|
goto out_release_regions;
|
|
}
|
|
card->pdev = pdev;
|
|
|
|
/* fetch base address and length of first resource */
|
|
mmio_start = pci_resource_start(pdev, 0);
|
|
mmio_len = pci_resource_len(pdev, 0);
|
|
|
|
card->netdev->mem_start = mmio_start;
|
|
card->netdev->mem_end = mmio_start + mmio_len;
|
|
card->regs = ioremap(mmio_start, mmio_len);
|
|
|
|
if (!card->regs) {
|
|
pr_err("Couldn't obtain PCI resources, aborting.\n");
|
|
goto out_release_regions;
|
|
}
|
|
|
|
return card;
|
|
|
|
out_release_regions:
|
|
pci_release_regions(pdev);
|
|
out_disable_dev:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* spider_net_probe - initialization of a device
|
|
* @pdev: PCI device
|
|
* @ent: entry in the device id list
|
|
*
|
|
* Returns 0 on success, <0 on failure
|
|
*
|
|
* spider_net_probe initializes pdev and registers a net_device
|
|
* structure for it. After that, the device can be ifconfig'ed up
|
|
**/
|
|
static int __devinit
|
|
spider_net_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
int err = -EIO;
|
|
struct spider_net_card *card;
|
|
|
|
card = spider_net_setup_pci_dev(pdev);
|
|
if (!card)
|
|
goto out;
|
|
|
|
spider_net_workaround_rxramfull(card);
|
|
spider_net_init_card(card);
|
|
|
|
err = spider_net_setup_phy(card);
|
|
if (err)
|
|
goto out_undo_pci;
|
|
|
|
err = spider_net_init_firmware(card);
|
|
if (err)
|
|
goto out_undo_pci;
|
|
|
|
err = spider_net_setup_netdev(card);
|
|
if (err)
|
|
goto out_undo_pci;
|
|
|
|
return 0;
|
|
|
|
out_undo_pci:
|
|
spider_net_undo_pci_setup(card);
|
|
free_netdev(card->netdev);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* spider_net_remove - removal of a device
|
|
* @pdev: PCI device
|
|
*
|
|
* Returns 0 on success, <0 on failure
|
|
*
|
|
* spider_net_remove is called to remove the device and unregisters the
|
|
* net_device
|
|
**/
|
|
static void __devexit
|
|
spider_net_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev;
|
|
struct spider_net_card *card;
|
|
|
|
netdev = pci_get_drvdata(pdev);
|
|
card = netdev_priv(netdev);
|
|
|
|
wait_event(card->waitq,
|
|
atomic_read(&card->tx_timeout_task_counter) == 0);
|
|
|
|
unregister_netdev(netdev);
|
|
|
|
/* switch off card */
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_STOP_VALUE);
|
|
spider_net_write_reg(card, SPIDER_NET_CKRCTRL,
|
|
SPIDER_NET_CKRCTRL_RUN_VALUE);
|
|
|
|
spider_net_undo_pci_setup(card);
|
|
free_netdev(netdev);
|
|
}
|
|
|
|
static struct pci_driver spider_net_driver = {
|
|
.name = spider_net_driver_name,
|
|
.id_table = spider_net_pci_tbl,
|
|
.probe = spider_net_probe,
|
|
.remove = __devexit_p(spider_net_remove)
|
|
};
|
|
|
|
/**
|
|
* spider_net_init - init function when the driver is loaded
|
|
*
|
|
* spider_net_init registers the device driver
|
|
*/
|
|
static int __init spider_net_init(void)
|
|
{
|
|
printk(KERN_INFO "Spidernet version %s.\n", VERSION);
|
|
|
|
if (rx_descriptors < SPIDER_NET_RX_DESCRIPTORS_MIN) {
|
|
rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MIN;
|
|
pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
|
|
}
|
|
if (rx_descriptors > SPIDER_NET_RX_DESCRIPTORS_MAX) {
|
|
rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_MAX;
|
|
pr_info("adjusting rx descriptors to %i.\n", rx_descriptors);
|
|
}
|
|
if (tx_descriptors < SPIDER_NET_TX_DESCRIPTORS_MIN) {
|
|
tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MIN;
|
|
pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
|
|
}
|
|
if (tx_descriptors > SPIDER_NET_TX_DESCRIPTORS_MAX) {
|
|
tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_MAX;
|
|
pr_info("adjusting tx descriptors to %i.\n", tx_descriptors);
|
|
}
|
|
|
|
return pci_register_driver(&spider_net_driver);
|
|
}
|
|
|
|
/**
|
|
* spider_net_cleanup - exit function when driver is unloaded
|
|
*
|
|
* spider_net_cleanup unregisters the device driver
|
|
*/
|
|
static void __exit spider_net_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&spider_net_driver);
|
|
}
|
|
|
|
module_init(spider_net_init);
|
|
module_exit(spider_net_cleanup);
|