1052 lines
31 KiB
C
1052 lines
31 KiB
C
/*
|
|
* Toshiba rbtx4927 specific setup
|
|
*
|
|
* Author: MontaVista Software, Inc.
|
|
* source@mvista.com
|
|
*
|
|
* Copyright 2001-2002 MontaVista Software Inc.
|
|
*
|
|
* Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
|
|
* Copyright (C) 2000 RidgeRun, Inc.
|
|
* Author: RidgeRun, Inc.
|
|
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
|
|
*
|
|
* Copyright 2001 MontaVista Software Inc.
|
|
* Author: jsun@mvista.com or jsun@junsun.net
|
|
*
|
|
* Copyright 2002 MontaVista Software Inc.
|
|
* Author: Michael Pruznick, michael_pruznick@mvista.com
|
|
*
|
|
* Copyright (C) 2000-2001 Toshiba Corporation
|
|
*
|
|
* Copyright (C) 2004 MontaVista Software Inc.
|
|
* Author: Manish Lachwani, mlachwani@mvista.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/swap.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/page.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/irq_regs.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/time.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/blkdev.h>
|
|
#ifdef CONFIG_TOSHIBA_FPCIB0
|
|
#include <asm/tx4927/smsc_fdc37m81x.h>
|
|
#endif
|
|
#include <asm/tx4927/toshiba_rbtx4927.h>
|
|
#ifdef CONFIG_PCI
|
|
#include <asm/tx4927/tx4927_pci.h>
|
|
#endif
|
|
#ifdef CONFIG_BLK_DEV_IDEPCI
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ide.h>
|
|
#endif
|
|
#ifdef CONFIG_SERIAL_TXX9
|
|
#include <linux/tty.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#endif
|
|
|
|
#undef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
#define TOSHIBA_RBTX4927_SETUP_NONE 0x00000000
|
|
|
|
#define TOSHIBA_RBTX4927_SETUP_INFO ( 1 << 0 )
|
|
#define TOSHIBA_RBTX4927_SETUP_WARN ( 1 << 1 )
|
|
#define TOSHIBA_RBTX4927_SETUP_EROR ( 1 << 2 )
|
|
|
|
#define TOSHIBA_RBTX4927_SETUP_EFWFU ( 1 << 3 )
|
|
#define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 )
|
|
#define TOSHIBA_RBTX4927_SETUP_TIME_INIT ( 1 << 5 )
|
|
#define TOSHIBA_RBTX4927_SETUP_TIMER_SETUP ( 1 << 6 )
|
|
#define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 )
|
|
#define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 )
|
|
#define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 )
|
|
#define TOSHIBA_RBTX4927_SETUP_PCI66 ( 1 << 10 )
|
|
|
|
#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff
|
|
#endif
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
static const u32 toshiba_rbtx4927_setup_debug_flag =
|
|
(TOSHIBA_RBTX4927_SETUP_NONE | TOSHIBA_RBTX4927_SETUP_INFO |
|
|
TOSHIBA_RBTX4927_SETUP_WARN | TOSHIBA_RBTX4927_SETUP_EROR |
|
|
TOSHIBA_RBTX4927_SETUP_EFWFU | TOSHIBA_RBTX4927_SETUP_SETUP |
|
|
TOSHIBA_RBTX4927_SETUP_TIME_INIT | TOSHIBA_RBTX4927_SETUP_TIMER_SETUP
|
|
| TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
|
|
TOSHIBA_RBTX4927_SETUP_PCI2 | TOSHIBA_RBTX4927_SETUP_PCI66);
|
|
#endif
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \
|
|
if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \
|
|
{ \
|
|
char tmp[100]; \
|
|
sprintf( tmp, str ); \
|
|
printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
|
|
}
|
|
#else
|
|
#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...)
|
|
#endif
|
|
|
|
/* These functions are used for rebooting or halting the machine*/
|
|
extern void toshiba_rbtx4927_restart(char *command);
|
|
extern void toshiba_rbtx4927_halt(void);
|
|
extern void toshiba_rbtx4927_power_off(void);
|
|
|
|
int tx4927_using_backplane = 0;
|
|
|
|
extern void gt64120_time_init(void);
|
|
extern void toshiba_rbtx4927_irq_setup(void);
|
|
|
|
char *prom_getcmdline(void);
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_TX4927BUG_WORKAROUND
|
|
#undef TX4927_SUPPORT_COMMAND_IO
|
|
#undef TX4927_SUPPORT_PCI_66
|
|
int tx4927_cpu_clock = 100000000; /* 100MHz */
|
|
unsigned long mips_pci_io_base;
|
|
unsigned long mips_pci_io_size;
|
|
unsigned long mips_pci_mem_base;
|
|
unsigned long mips_pci_mem_size;
|
|
/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
|
|
unsigned long mips_pci_io_pciaddr = 0;
|
|
unsigned long mips_memory_upper;
|
|
static int tx4927_ccfg_toeon = 1;
|
|
static int tx4927_pcic_trdyto = 0; /* default: disabled */
|
|
unsigned long tx4927_ce_base[8];
|
|
void tx4927_pci_setup(void);
|
|
void tx4927_reset_pci_pcic(void);
|
|
int tx4927_pci66 = 0; /* 0:auto */
|
|
#endif
|
|
|
|
char *toshiba_name = "";
|
|
|
|
#ifdef CONFIG_PCI
|
|
static void tx4927_pcierr_interrupt(int irq, void *dev_id)
|
|
{
|
|
#ifdef CONFIG_BLK_DEV_IDEPCI
|
|
/* ignore MasterAbort for ide probing... */
|
|
if (irq == TX4927_IRQ_IRC_PCIERR &&
|
|
((tx4927_pcicptr->pcistatus >> 16) & 0xf900) ==
|
|
PCI_STATUS_REC_MASTER_ABORT) {
|
|
tx4927_pcicptr->pcistatus =
|
|
(tx4927_pcicptr->
|
|
pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
|
|
<< 16);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
printk("PCI error interrupt (irq 0x%x).\n", irq);
|
|
|
|
printk("pcistat:%04x, g2pstatus:%08lx, pcicstatus:%08lx\n",
|
|
(unsigned short) (tx4927_pcicptr->pcistatus >> 16),
|
|
tx4927_pcicptr->g2pstatus, tx4927_pcicptr->pcicstatus);
|
|
printk("ccfg:%08lx, tear:%02lx_%08lx\n",
|
|
(unsigned long) tx4927_ccfgptr->ccfg,
|
|
(unsigned long) (tx4927_ccfgptr->tear >> 32),
|
|
(unsigned long) tx4927_ccfgptr->tear);
|
|
show_regs(get_irq_regs());
|
|
}
|
|
|
|
void __init toshiba_rbtx4927_pci_irq_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
void tx4927_reset_pci_pcic(void)
|
|
{
|
|
/* Reset PCI Bus */
|
|
*tx4927_pcireset_ptr = 1;
|
|
/* Reset PCIC */
|
|
tx4927_ccfgptr->clkctr |= TX4927_CLKCTR_PCIRST;
|
|
udelay(10000);
|
|
/* clear PCIC reset */
|
|
tx4927_ccfgptr->clkctr &= ~TX4927_CLKCTR_PCIRST;
|
|
*tx4927_pcireset_ptr = 0;
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#ifdef CONFIG_PCI
|
|
void print_pci_status(void)
|
|
{
|
|
printk("PCI STATUS %lx\n", tx4927_pcicptr->pcistatus);
|
|
printk("PCIC STATUS %lx\n", tx4927_pcicptr->pcicstatus);
|
|
}
|
|
|
|
extern struct pci_controller tx4927_controller;
|
|
|
|
static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
|
|
int top_bus, int busnr, int devfn)
|
|
{
|
|
static struct pci_dev dev;
|
|
static struct pci_bus bus;
|
|
|
|
dev.sysdata = (void *)hose;
|
|
dev.devfn = devfn;
|
|
bus.number = busnr;
|
|
bus.ops = hose->pci_ops;
|
|
bus.parent = NULL;
|
|
dev.bus = &bus;
|
|
|
|
return &dev;
|
|
}
|
|
|
|
#define EARLY_PCI_OP(rw, size, type) \
|
|
static int early_##rw##_config_##size(struct pci_controller *hose, \
|
|
int top_bus, int bus, int devfn, int offset, type value) \
|
|
{ \
|
|
return pci_##rw##_config_##size( \
|
|
fake_pci_dev(hose, top_bus, bus, devfn), \
|
|
offset, value); \
|
|
}
|
|
|
|
EARLY_PCI_OP(read, byte, u8 *)
|
|
EARLY_PCI_OP(read, word, u16 *)
|
|
EARLY_PCI_OP(read, dword, u32 *)
|
|
EARLY_PCI_OP(write, byte, u8)
|
|
EARLY_PCI_OP(write, word, u16)
|
|
EARLY_PCI_OP(write, dword, u32)
|
|
|
|
static int __init tx4927_pcibios_init(void)
|
|
{
|
|
unsigned int id;
|
|
u32 pci_devfn;
|
|
int devfn_start = 0;
|
|
int devfn_stop = 0xff;
|
|
int busno = 0; /* One bus on the Toshiba */
|
|
struct pci_controller *hose = &tx4927_controller;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
"-\n");
|
|
|
|
for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) {
|
|
early_read_config_dword(hose, busno, busno, pci_devfn,
|
|
PCI_VENDOR_ID, &id);
|
|
|
|
if (id == 0xffffffff) {
|
|
continue;
|
|
}
|
|
|
|
if (id == 0x94601055) {
|
|
u8 v08_64;
|
|
u32 v32_b0;
|
|
u8 v08_e1;
|
|
char *s = " sb/isa --";
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
|
|
s);
|
|
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x64, &v08_64);
|
|
early_read_config_dword(hose, busno, busno,
|
|
pci_devfn, 0xb0, &v32_b0);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0xe1, &v08_e1);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x64 = 0x%02x\n", s, v08_64);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0xb0 = 0x%02x\n", s, v32_b0);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0xe1 = 0x%02x\n", s, v08_e1);
|
|
|
|
/* serial irq control */
|
|
v08_64 = 0xd0;
|
|
|
|
/* serial irq pin */
|
|
v32_b0 |= 0x00010000;
|
|
|
|
/* ide irq on isa14 */
|
|
v08_e1 &= 0xf0;
|
|
v08_e1 |= 0x0d;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x64 = 0x%02x\n", s, v08_64);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0xb0 = 0x%02x\n", s, v32_b0);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0xe1 = 0x%02x\n", s, v08_e1);
|
|
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x64, v08_64);
|
|
early_write_config_dword(hose, busno, busno,
|
|
pci_devfn, 0xb0, v32_b0);
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0xe1, v08_e1);
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
{
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x64,
|
|
&v08_64);
|
|
early_read_config_dword(hose, busno, busno,
|
|
pci_devfn, 0xb0,
|
|
&v32_b0);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0xe1,
|
|
&v08_e1);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x64 = 0x%02x\n", s, v08_64);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0xb0 = 0x%02x\n", s, v32_b0);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0xe1 = 0x%02x\n", s, v08_e1);
|
|
}
|
|
#endif
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
|
|
s);
|
|
}
|
|
|
|
if (id == 0x91301055) {
|
|
u8 v08_04;
|
|
u8 v08_09;
|
|
u8 v08_41;
|
|
u8 v08_43;
|
|
u8 v08_5c;
|
|
char *s = " sb/ide --";
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
|
|
s);
|
|
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x04, &v08_04);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x09, &v08_09);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x41, &v08_41);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x43, &v08_43);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x5c, &v08_5c);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x04 = 0x%02x\n", s, v08_04);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x09 = 0x%02x\n", s, v08_09);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x41 = 0x%02x\n", s, v08_41);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x43 = 0x%02x\n", s, v08_43);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s beg 0x5c = 0x%02x\n", s, v08_5c);
|
|
|
|
/* enable ide master/io */
|
|
v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
|
|
|
|
/* enable ide native mode */
|
|
v08_09 |= 0x05;
|
|
|
|
/* enable primary ide */
|
|
v08_41 |= 0x80;
|
|
|
|
/* enable secondary ide */
|
|
v08_43 |= 0x80;
|
|
|
|
/*
|
|
* !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
|
|
*
|
|
* This line of code is intended to provide the user with a work
|
|
* around solution to the anomalies cited in SMSC's anomaly sheet
|
|
* entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
|
|
*
|
|
* !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
|
|
*/
|
|
v08_5c |= 0x01;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x04 = 0x%02x\n", s, v08_04);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x09 = 0x%02x\n", s, v08_09);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x41 = 0x%02x\n", s, v08_41);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x43 = 0x%02x\n", s, v08_43);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s mid 0x5c = 0x%02x\n", s, v08_5c);
|
|
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x5c, v08_5c);
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x04, v08_04);
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x09, v08_09);
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x41, v08_41);
|
|
early_write_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x43, v08_43);
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
{
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x04,
|
|
&v08_04);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x09,
|
|
&v08_09);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x41,
|
|
&v08_41);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x43,
|
|
&v08_43);
|
|
early_read_config_byte(hose, busno, busno,
|
|
pci_devfn, 0x5c,
|
|
&v08_5c);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x04 = 0x%02x\n", s, v08_04);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x09 = 0x%02x\n", s, v08_09);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x41 = 0x%02x\n", s, v08_41);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x43 = 0x%02x\n", s, v08_43);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
":%s end 0x5c = 0x%02x\n", s, v08_5c);
|
|
}
|
|
#endif
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
|
|
s);
|
|
}
|
|
|
|
}
|
|
|
|
register_pci_controller(&tx4927_controller);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
|
|
"+\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(tx4927_pcibios_init);
|
|
|
|
extern struct resource pci_io_resource;
|
|
extern struct resource pci_mem_resource;
|
|
|
|
void tx4927_pci_setup(void)
|
|
{
|
|
static int called = 0;
|
|
extern unsigned int tx4927_get_mem_size(void);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n");
|
|
|
|
mips_memory_upper = tx4927_get_mem_size() << 20;
|
|
mips_memory_upper += KSEG0;
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_memory_upper\n",
|
|
mips_memory_upper);
|
|
mips_pci_io_base = TX4927_PCIIO;
|
|
mips_pci_io_size = TX4927_PCIIO_SIZE;
|
|
mips_pci_mem_base = TX4927_PCIMEM;
|
|
mips_pci_mem_size = TX4927_PCIMEM_SIZE;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_pci_io_base\n",
|
|
mips_pci_io_base);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_pci_io_size\n",
|
|
mips_pci_io_size);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_pci_mem_base\n",
|
|
mips_pci_mem_base);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_pci_mem_size\n",
|
|
mips_pci_mem_size);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=pci_io_resource.start\n",
|
|
pci_io_resource.start);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=pci_io_resource.end\n",
|
|
pci_io_resource.end);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=pci_mem_resource.start\n",
|
|
pci_mem_resource.start);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=pci_mem_resource.end\n",
|
|
pci_mem_resource.end);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
"0x%08lx=mips_io_port_base",
|
|
mips_io_port_base);
|
|
if (!called) {
|
|
printk
|
|
("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
|
|
toshiba_name,
|
|
(unsigned short) (tx4927_pcicptr->pciid >> 16),
|
|
(unsigned short) (tx4927_pcicptr->pciid & 0xffff),
|
|
(unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
|
|
(!(tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCIXARB)) ? "External" :
|
|
"Internal");
|
|
called = 1;
|
|
}
|
|
printk("%s PCIC --%s PCICLK:",toshiba_name,
|
|
(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
|
|
if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
|
|
int pciclk = 0;
|
|
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
|
|
switch ((unsigned long) tx4927_ccfgptr->
|
|
ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
|
|
case TX4937_CCFG_PCIDIVMODE_4:
|
|
pciclk = tx4927_cpu_clock / 4;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_4_5:
|
|
pciclk = tx4927_cpu_clock * 2 / 9;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_5:
|
|
pciclk = tx4927_cpu_clock / 5;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_5_5:
|
|
pciclk = tx4927_cpu_clock * 2 / 11;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_8:
|
|
pciclk = tx4927_cpu_clock / 8;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_9:
|
|
pciclk = tx4927_cpu_clock / 9;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_10:
|
|
pciclk = tx4927_cpu_clock / 10;
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_11:
|
|
pciclk = tx4927_cpu_clock / 11;
|
|
break;
|
|
}
|
|
|
|
else
|
|
switch ((unsigned long) tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
|
|
case TX4927_CCFG_PCIDIVMODE_2_5:
|
|
pciclk = tx4927_cpu_clock * 2 / 5;
|
|
break;
|
|
case TX4927_CCFG_PCIDIVMODE_3:
|
|
pciclk = tx4927_cpu_clock / 3;
|
|
break;
|
|
case TX4927_CCFG_PCIDIVMODE_5:
|
|
pciclk = tx4927_cpu_clock / 5;
|
|
break;
|
|
case TX4927_CCFG_PCIDIVMODE_6:
|
|
pciclk = tx4927_cpu_clock / 6;
|
|
break;
|
|
}
|
|
|
|
printk("Internal(%dMHz)", pciclk / 1000000);
|
|
} else {
|
|
int pciclk = 0;
|
|
int pciclk_setting = *tx4927_pci_clk_ptr;
|
|
switch (pciclk_setting & TX4927_PCI_CLK_MASK) {
|
|
case TX4927_PCI_CLK_33:
|
|
pciclk = 33333333;
|
|
break;
|
|
case TX4927_PCI_CLK_25:
|
|
pciclk = 25000000;
|
|
break;
|
|
case TX4927_PCI_CLK_66:
|
|
pciclk = 66666666;
|
|
break;
|
|
case TX4927_PCI_CLK_50:
|
|
pciclk = 50000000;
|
|
break;
|
|
}
|
|
printk("External(%dMHz)", pciclk / 1000000);
|
|
}
|
|
printk("\n");
|
|
|
|
|
|
|
|
/* GB->PCI mappings */
|
|
tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4;
|
|
tx4927_pcicptr->g2piogbase = mips_pci_io_base |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4927_PCIC_G2PIOGBASE_ECHG
|
|
#else
|
|
TX4927_PCIC_G2PIOGBASE_BSDIS
|
|
#endif
|
|
;
|
|
|
|
tx4927_pcicptr->g2piopbase = 0;
|
|
|
|
tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4;
|
|
tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4927_PCIC_G2PMnGBASE_ECHG
|
|
#else
|
|
TX4927_PCIC_G2PMnGBASE_BSDIS
|
|
#endif
|
|
;
|
|
tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base;
|
|
|
|
tx4927_pcicptr->g2pmmask[1] = 0;
|
|
tx4927_pcicptr->g2pmgbase[1] = 0;
|
|
tx4927_pcicptr->g2pmpbase[1] = 0;
|
|
tx4927_pcicptr->g2pmmask[2] = 0;
|
|
tx4927_pcicptr->g2pmgbase[2] = 0;
|
|
tx4927_pcicptr->g2pmpbase[2] = 0;
|
|
|
|
|
|
/* PCI->GB mappings (I/O 256B) */
|
|
tx4927_pcicptr->p2giopbase = 0; /* 256B */
|
|
|
|
/* PCI->GB mappings (MEM 512MB) M0 gets all of memory */
|
|
tx4927_pcicptr->p2gm0plbase = 0;
|
|
tx4927_pcicptr->p2gm0pubase = 0;
|
|
tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN |
|
|
#ifdef __BIG_ENDIAN
|
|
TX4927_PCIC_P2GMnGBASE_TECHG
|
|
#else
|
|
TX4927_PCIC_P2GMnGBASE_TBSDIS
|
|
#endif
|
|
;
|
|
|
|
/* PCI->GB mappings (MEM 16MB) -not used */
|
|
tx4927_pcicptr->p2gm1plbase = 0xffffffff;
|
|
#ifdef CONFIG_TX4927BUG_WORKAROUND
|
|
/*
|
|
* TX4927-PCIC-BUG: P2GM1PUBASE must be 0
|
|
* if P2GM0PUBASE was 0.
|
|
*/
|
|
tx4927_pcicptr->p2gm1pubase = 0;
|
|
#else
|
|
tx4927_pcicptr->p2gm1pubase = 0xffffffff;
|
|
#endif
|
|
tx4927_pcicptr->p2gmgbase[1] = 0;
|
|
|
|
/* PCI->GB mappings (MEM 1MB) -not used */
|
|
tx4927_pcicptr->p2gm2pbase = 0xffffffff;
|
|
tx4927_pcicptr->p2gmgbase[2] = 0;
|
|
|
|
|
|
/* Enable Initiator Memory 0 Space, I/O Space, Config */
|
|
tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK;
|
|
tx4927_pcicptr->pciccfg |=
|
|
TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE |
|
|
TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR;
|
|
|
|
|
|
/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
|
|
tx4927_pcicptr->pcicfg1 = 0;
|
|
|
|
if (tx4927_pcic_trdyto >= 0) {
|
|
tx4927_pcicptr->g2ptocnt &= ~0xff;
|
|
tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff);
|
|
}
|
|
|
|
/* Clear All Local Bus Status */
|
|
tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL;
|
|
/* Enable All Local Bus Interrupts */
|
|
tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL;
|
|
/* Clear All Initiator Status */
|
|
tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL;
|
|
/* Enable All Initiator Interrupts */
|
|
tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL;
|
|
/* Clear All PCI Status Error */
|
|
tx4927_pcicptr->pcistatus =
|
|
(tx4927_pcicptr->pcistatus & 0x0000ffff) |
|
|
(TX4927_PCIC_PCISTATUS_ALL << 16);
|
|
/* Enable All PCI Status Error Interrupts */
|
|
tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL;
|
|
|
|
/* PCIC Int => IRC IRQ16 */
|
|
tx4927_pcicptr->pcicfg2 =
|
|
(tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC;
|
|
|
|
if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) {
|
|
/* XXX */
|
|
} else {
|
|
/* Reset Bus Arbiter */
|
|
tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA;
|
|
/* Enable Bus Arbiter */
|
|
tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN;
|
|
}
|
|
|
|
tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER |
|
|
PCI_COMMAND_MEMORY |
|
|
PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
|
|
":pci setup complete:\n");
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n");
|
|
}
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
void toshiba_rbtx4927_restart(char *command)
|
|
{
|
|
printk(KERN_NOTICE "System Rebooting...\n");
|
|
|
|
/* enable the s/w reset register */
|
|
reg_wr08(RBTX4927_SW_RESET_ENABLE, RBTX4927_SW_RESET_ENABLE_SET);
|
|
|
|
/* wait for enable to be seen */
|
|
while ((reg_rd08(RBTX4927_SW_RESET_ENABLE) &
|
|
RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
|
|
|
|
/* do a s/w reset */
|
|
reg_wr08(RBTX4927_SW_RESET_DO, RBTX4927_SW_RESET_DO_SET);
|
|
|
|
/* do something passive while waiting for reset */
|
|
local_irq_disable();
|
|
while (1)
|
|
asm_wait();
|
|
|
|
/* no return */
|
|
}
|
|
|
|
|
|
void toshiba_rbtx4927_halt(void)
|
|
{
|
|
printk(KERN_NOTICE "System Halted\n");
|
|
local_irq_disable();
|
|
while (1) {
|
|
asm_wait();
|
|
}
|
|
/* no return */
|
|
}
|
|
|
|
void toshiba_rbtx4927_power_off(void)
|
|
{
|
|
toshiba_rbtx4927_halt();
|
|
/* no return */
|
|
}
|
|
|
|
void __init toshiba_rbtx4927_setup(void)
|
|
{
|
|
vu32 cp0_config;
|
|
char *argptr;
|
|
|
|
printk("CPU is %s\n", toshiba_name);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
"-\n");
|
|
|
|
/* f/w leaves this on at startup */
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":Clearing STO_ERL.\n");
|
|
clear_c0_status(ST0_ERL);
|
|
|
|
/* enable caches -- HCP5 does this, pmon does not */
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":Enabling TX49_CONF_IC,TX49_CONF_DC.\n");
|
|
cp0_config = read_c0_config();
|
|
cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
|
|
write_c0_config(cp0_config);
|
|
|
|
#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
|
|
{
|
|
extern void dump_cp0(char *);
|
|
dump_cp0("toshiba_rbtx4927_early_fw_fixup");
|
|
}
|
|
#endif
|
|
|
|
/* setup irq stuff */
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":Setting up tx4927 pic.\n");
|
|
TX4927_WR(0xff1ff604, 0x00000400); /* irq trigger */
|
|
TX4927_WR(0xff1ff608, 0x00000000); /* irq trigger */
|
|
|
|
/* setup serial stuff */
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":Setting up tx4927 sio.\n");
|
|
TX4927_WR(0xff1ff314, 0x00000000); /* h/w flow control off */
|
|
TX4927_WR(0xff1ff414, 0x00000000); /* h/w flow control off */
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
"+\n");
|
|
|
|
set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":mips_io_port_base=0x%08lx\n",
|
|
mips_io_port_base);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":Resource\n");
|
|
ioport_resource.end = 0xffffffff;
|
|
iomem_resource.end = 0xffffffff;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":ResetRoutines\n");
|
|
_machine_restart = toshiba_rbtx4927_restart;
|
|
_machine_halt = toshiba_rbtx4927_halt;
|
|
pm_power_off = toshiba_rbtx4927_power_off;
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
/* PCIC */
|
|
/*
|
|
* ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
|
|
*
|
|
* For TX4927:
|
|
* PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
|
|
* CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
|
|
* CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
|
|
* CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
|
|
* CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
|
|
* i.e. S9[3]: ON (83MHz), OFF (100MHz)
|
|
*
|
|
* For TX4937:
|
|
* PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
|
|
* PCIDIVMODE[10] is 0.
|
|
* CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
|
|
* CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
|
|
* CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
|
|
* CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
|
|
* CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
|
|
* CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
|
|
*
|
|
*/
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
|
|
"ccfg is %lx, PCIDIVMODE is %x\n",
|
|
(unsigned long) tx4927_ccfgptr->ccfg,
|
|
(unsigned long) tx4927_ccfgptr->ccfg &
|
|
(mips_machtype == MACH_TOSHIBA_RBTX4937 ?
|
|
TX4937_CCFG_PCIDIVMODE_MASK :
|
|
TX4927_CCFG_PCIDIVMODE_MASK));
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
|
|
"PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
|
|
(unsigned long) tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCI66,
|
|
(unsigned long) tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCIMIDE,
|
|
(unsigned long) tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCIXARB);
|
|
|
|
if (mips_machtype == MACH_TOSHIBA_RBTX4937)
|
|
switch ((unsigned long)tx4927_ccfgptr->
|
|
ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
|
|
case TX4937_CCFG_PCIDIVMODE_8:
|
|
case TX4937_CCFG_PCIDIVMODE_4:
|
|
tx4927_cpu_clock = 266666666; /* 266MHz */
|
|
break;
|
|
case TX4937_CCFG_PCIDIVMODE_9:
|
|
case TX4937_CCFG_PCIDIVMODE_4_5:
|
|
tx4927_cpu_clock = 300000000; /* 300MHz */
|
|
break;
|
|
default:
|
|
tx4927_cpu_clock = 333333333; /* 333MHz */
|
|
}
|
|
else
|
|
switch ((unsigned long)tx4927_ccfgptr->
|
|
ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
|
|
case TX4927_CCFG_PCIDIVMODE_2_5:
|
|
case TX4927_CCFG_PCIDIVMODE_5:
|
|
tx4927_cpu_clock = 166666666; /* 166MHz */
|
|
break;
|
|
default:
|
|
tx4927_cpu_clock = 200000000; /* 200MHz */
|
|
}
|
|
|
|
/* CCFG */
|
|
/* enable Timeout BusError */
|
|
if (tx4927_ccfg_toeon)
|
|
tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
|
|
|
|
/* SDRAMC fixup */
|
|
#ifdef CONFIG_TX4927BUG_WORKAROUND
|
|
/*
|
|
* TX4927-BUG: INF 01-01-18/ BUG 01-01-22
|
|
* G-bus timeout error detection is incorrect
|
|
*/
|
|
if (tx4927_ccfg_toeon)
|
|
tx4927_sdramcptr->tr |= 0x02000000; /* RCD:3tck */
|
|
#endif
|
|
|
|
tx4927_pci_setup();
|
|
if (tx4927_using_backplane == 1)
|
|
printk("backplane board IS installed\n");
|
|
else
|
|
printk("No Backplane \n");
|
|
|
|
/* this is on ISA bus behind PCI bus, so need PCI up first */
|
|
#ifdef CONFIG_TOSHIBA_FPCIB0
|
|
{
|
|
if (tx4927_using_backplane) {
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":fpcibo=yes\n");
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":smsc_fdc37m81x_init()\n");
|
|
smsc_fdc37m81x_init(0x3f0);
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":smsc_fdc37m81x_config_beg()\n");
|
|
smsc_fdc37m81x_config_beg();
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":smsc_fdc37m81x_config_set(KBD)\n");
|
|
smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
|
|
SMSC_FDC37M81X_KBD);
|
|
smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
|
|
smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
|
|
smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
|
|
1);
|
|
|
|
smsc_fdc37m81x_config_end();
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":smsc_fdc37m81x_config_end()\n");
|
|
} else {
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
":fpcibo=not_found\n");
|
|
}
|
|
}
|
|
#else
|
|
{
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK
|
|
(TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n");
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#ifdef CONFIG_SERIAL_TXX9
|
|
{
|
|
extern int early_serial_txx9_setup(struct uart_port *port);
|
|
int i;
|
|
struct uart_port req;
|
|
for(i = 0; i < 2; i++) {
|
|
memset(&req, 0, sizeof(req));
|
|
req.line = i;
|
|
req.iotype = UPIO_MEM;
|
|
req.membase = (char *)(0xff1ff300 + i * 0x100);
|
|
req.mapbase = 0xff1ff300 + i * 0x100;
|
|
req.irq = 32 + i;
|
|
req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
|
|
req.uartclk = 50000000;
|
|
early_serial_txx9_setup(&req);
|
|
}
|
|
}
|
|
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
|
|
argptr = prom_getcmdline();
|
|
if (strstr(argptr, "console=") == NULL) {
|
|
strcat(argptr, " console=ttyS0,38400");
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_ROOT_NFS
|
|
argptr = prom_getcmdline();
|
|
if (strstr(argptr, "root=") == NULL) {
|
|
strcat(argptr, " root=/dev/nfs rw");
|
|
}
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_IP_PNP
|
|
argptr = prom_getcmdline();
|
|
if (strstr(argptr, "ip=") == NULL) {
|
|
strcat(argptr, " ip=any");
|
|
}
|
|
#endif
|
|
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
|
|
"+\n");
|
|
}
|
|
|
|
void __init
|
|
toshiba_rbtx4927_time_init(void)
|
|
{
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "-\n");
|
|
|
|
mips_hpt_frequency = tx4927_cpu_clock / 2;
|
|
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "+\n");
|
|
|
|
}
|
|
|
|
void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq)
|
|
{
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
|
|
"-\n");
|
|
TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
|
|
"+\n");
|
|
}
|
|
|
|
static int __init toshiba_rbtx4927_rtc_init(void)
|
|
{
|
|
struct resource res = {
|
|
.start = 0x1c010000,
|
|
.end = 0x1c010000 + 0x800 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
struct platform_device *dev =
|
|
platform_device_register_simple("ds1742", -1, &res, 1);
|
|
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
|
|
}
|
|
device_initcall(toshiba_rbtx4927_rtc_init);
|