OpenCloudOS-Kernel/arch/ppc/platforms/mcpn765.h

123 lines
4.0 KiB
C

/*
* arch/ppc/platforms/mcpn765.h
*
* Definitions for Motorola MCG MCPN765 cPCI Board.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
/*
* From Processor to PCI:
* PCI Mem Space: 0x80000000 - 0xc0000000 -> 0x80000000 - 0xc0000000 (1 GB)
* PCI I/O Space: 0xfd800000 - 0xfe000000 -> 0x00000000 - 0x00800000 (8 MB)
* Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
* MPIC in PCI Mem Space: 0xfe800000 - 0xfe830000 (not all used by MPIC)
*
* From PCI to Processor:
* System Memory: 0x00000000 -> 0x00000000
*/
#ifndef __PPC_PLATFORMS_MCPN765_H
#define __PPC_PLATFORMS_MCPN765_H
#include <linux/config.h>
/* PCI Memory space mapping info */
#define MCPN765_PCI_MEM_SIZE 0x40000000U
#define MCPN765_PROC_PCI_MEM_START 0x80000000U
#define MCPN765_PROC_PCI_MEM_END (MCPN765_PROC_PCI_MEM_START + \
MCPN765_PCI_MEM_SIZE - 1)
#define MCPN765_PCI_MEM_START 0x80000000U
#define MCPN765_PCI_MEM_END (MCPN765_PCI_MEM_START + \
MCPN765_PCI_MEM_SIZE - 1)
/* PCI I/O space mapping info */
#define MCPN765_PCI_IO_SIZE 0x00800000U
#define MCPN765_PROC_PCI_IO_START 0xfd800000U
#define MCPN765_PROC_PCI_IO_END (MCPN765_PROC_PCI_IO_START + \
MCPN765_PCI_IO_SIZE - 1)
#define MCPN765_PCI_IO_START 0x00000000U
#define MCPN765_PCI_IO_END (MCPN765_PCI_IO_START + \
MCPN765_PCI_IO_SIZE - 1)
/* System memory mapping info */
#define MCPN765_PCI_DRAM_OFFSET 0x00000000U
#define MCPN765_PCI_PHY_MEM_OFFSET 0x00000000U
#define MCPN765_ISA_MEM_BASE 0x00000000U
#define MCPN765_ISA_IO_BASE MCPN765_PROC_PCI_IO_START
/* Define base addresses for important sets of registers */
#define MCPN765_HAWK_MPIC_BASE 0xfe800000U
#define MCPN765_HAWK_SMC_BASE 0xfef80000U
#define MCPN765_HAWK_PPC_REG_BASE 0xfeff0000U
/* Define MCPN765 board register addresses. */
#define MCPN765_BOARD_STATUS_REG 0xfef88080U
#define MCPN765_BOARD_MODFAIL_REG 0xfef88090U
#define MCPN765_BOARD_MODRST_REG 0xfef880a0U
#define MCPN765_BOARD_TBEN_REG 0xfef880c0U
#define MCPN765_BOARD_GEOGRAPHICAL_REG 0xfef880e8U
#define MCPN765_BOARD_EXT_FEATURE_REG 0xfef880f0U
#define MCPN765_BOARD_LAST_RESET_REG 0xfef880f8U
/* Defines for UART */
/* Define the UART base addresses */
#define MCPN765_SERIAL_1 0xfef88000
#define MCPN765_SERIAL_2 0xfef88200
#define MCPN765_SERIAL_3 0xfef88400
#define MCPN765_SERIAL_4 0xfef88600
#ifdef CONFIG_SERIAL_MANY_PORTS
#define RS_TABLE_SIZE 64
#else
#define RS_TABLE_SIZE 4
#endif
/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
#define BASE_BAUD ( 1843200 / 16 )
#define UART_CLK 1843200
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
#endif
/* All UART IRQ's are wire-OR'd to IRQ 17 */
#define STD_SERIAL_PORT_DFNS \
{ 0, BASE_BAUD, MCPN765_SERIAL_1, 17, STD_COM_FLAGS, /* ttyS0 */\
iomem_base: (u8 *)MCPN765_SERIAL_1, \
iomem_reg_shift: 4, \
io_type: SERIAL_IO_MEM }, \
{ 0, BASE_BAUD, MCPN765_SERIAL_2, 17, STD_COM_FLAGS, /* ttyS1 */\
iomem_base: (u8 *)MCPN765_SERIAL_2, \
iomem_reg_shift: 4, \
io_type: SERIAL_IO_MEM }, \
{ 0, BASE_BAUD, MCPN765_SERIAL_3, 17, STD_COM_FLAGS, /* ttyS2 */\
iomem_base: (u8 *)MCPN765_SERIAL_3, \
iomem_reg_shift: 4, \
io_type: SERIAL_IO_MEM }, \
{ 0, BASE_BAUD, MCPN765_SERIAL_4, 17, STD_COM_FLAGS, /* ttyS3 */\
iomem_base: (u8 *)MCPN765_SERIAL_4, \
iomem_reg_shift: 4, \
io_type: SERIAL_IO_MEM },
#define SERIAL_PORT_DFNS \
STD_SERIAL_PORT_DFNS
/* Define the NVRAM/RTC address strobe & data registers */
#define MCPN765_PHYS_NVRAM_AS0 0xfef880c8U
#define MCPN765_PHYS_NVRAM_AS1 0xfef880d0U
#define MCPN765_PHYS_NVRAM_DATA 0xfef880d8U
extern void mcpn765_find_bridges(void);
#endif /* __PPC_PLATFORMS_MCPN765_H */