387 lines
9.2 KiB
C
387 lines
9.2 KiB
C
/*
|
|
* arch/ppc/platforms/4xx/luan.c
|
|
*
|
|
* Luan board specific routines
|
|
*
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* Copyright 2004-2005 MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/types.h>
|
|
#include <linux/major.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ocp.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/time.h>
|
|
#include <asm/todc.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/ppc4xx_pic.h>
|
|
#include <asm/ppcboot.h>
|
|
|
|
#include <syslib/ibm44x_common.h>
|
|
#include <syslib/ibm440gx_common.h>
|
|
#include <syslib/ibm440sp_common.h>
|
|
|
|
/*
|
|
* This is a horrible kludge, we eventually need to abstract this
|
|
* generic PHY stuff, so the standard phy mode defines can be
|
|
* easily used from arch code.
|
|
*/
|
|
#include "../../../../drivers/net/ibm_emac/ibm_emac_phy.h"
|
|
|
|
bd_t __res;
|
|
|
|
static struct ibm44x_clocks clocks __initdata;
|
|
|
|
static void __init
|
|
luan_calibrate_decr(void)
|
|
{
|
|
unsigned int freq;
|
|
|
|
if (mfspr(SPRN_CCR1) & CCR1_TCS)
|
|
freq = LUAN_TMR_CLK;
|
|
else
|
|
freq = clocks.cpu;
|
|
|
|
ibm44x_calibrate_decr(freq);
|
|
}
|
|
|
|
static int
|
|
luan_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
seq_printf(m, "vendor\t\t: IBM\n");
|
|
seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int
|
|
luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
|
|
/* PCIX0 in adapter mode, no host interrupt routing */
|
|
|
|
/* PCIX1 */
|
|
if (hose->index == 0) {
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{ 49, 49, 49, 49 }, /* IDSEL 1 - PCIX1 Slot 0 */
|
|
{ 49, 49, 49, 49 }, /* IDSEL 2 - PCIX1 Slot 1 */
|
|
{ 49, 49, 49, 49 }, /* IDSEL 3 - PCIX1 Slot 2 */
|
|
{ 49, 49, 49, 49 }, /* IDSEL 4 - PCIX1 Slot 3 */
|
|
};
|
|
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
/* PCIX2 */
|
|
} else if (hose->index == 1) {
|
|
static char pci_irq_table[][4] =
|
|
/*
|
|
* PCI IDSEL/INTPIN->INTLINE
|
|
* A B C D
|
|
*/
|
|
{
|
|
{ 50, 50, 50, 50 }, /* IDSEL 1 - PCIX2 Slot 0 */
|
|
{ 50, 50, 50, 50 }, /* IDSEL 2 - PCIX2 Slot 1 */
|
|
{ 50, 50, 50, 50 }, /* IDSEL 3 - PCIX2 Slot 2 */
|
|
{ 50, 50, 50, 50 }, /* IDSEL 4 - PCIX2 Slot 3 */
|
|
};
|
|
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
|
|
return PCI_IRQ_TABLE_LOOKUP;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void __init luan_set_emacdata(void)
|
|
{
|
|
struct ocp_def *def;
|
|
struct ocp_func_emac_data *emacdata;
|
|
|
|
/* Set phy_map, phy_mode, and mac_addr for the EMAC */
|
|
def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
|
|
emacdata = def->additions;
|
|
emacdata->phy_map = 0x00000001; /* Skip 0x00 */
|
|
emacdata->phy_mode = PHY_MODE_GMII;
|
|
memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
|
|
}
|
|
|
|
#define PCIX_READW(offset) \
|
|
(readw((void *)((u32)pcix_reg_base+offset)))
|
|
|
|
#define PCIX_WRITEW(value, offset) \
|
|
(writew(value, (void *)((u32)pcix_reg_base+offset)))
|
|
|
|
#define PCIX_WRITEL(value, offset) \
|
|
(writel(value, (void *)((u32)pcix_reg_base+offset)))
|
|
|
|
static void __init
|
|
luan_setup_pcix(void)
|
|
{
|
|
int i;
|
|
void *pcix_reg_base;
|
|
|
|
for (i=0;i<3;i++) {
|
|
pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
|
|
|
|
/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
|
|
PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
|
|
|
|
/* Disable all windows */
|
|
PCIX_WRITEL(0, PCIX0_POM0SA);
|
|
PCIX_WRITEL(0, PCIX0_POM1SA);
|
|
PCIX_WRITEL(0, PCIX0_POM2SA);
|
|
PCIX_WRITEL(0, PCIX0_PIM0SA);
|
|
PCIX_WRITEL(0, PCIX0_PIM0SAH);
|
|
PCIX_WRITEL(0, PCIX0_PIM1SA);
|
|
PCIX_WRITEL(0, PCIX0_PIM2SA);
|
|
PCIX_WRITEL(0, PCIX0_PIM2SAH);
|
|
|
|
/*
|
|
* Setup 512MB PLB->PCI outbound mem window
|
|
* (a_n000_0000->0_n000_0000)
|
|
* */
|
|
PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
|
|
PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
|
|
PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
|
|
PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
|
|
PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
|
|
|
|
/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
|
|
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
|
|
PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
|
|
PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
|
|
PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
|
|
|
|
iounmap(pcix_reg_base);
|
|
}
|
|
|
|
eieio();
|
|
}
|
|
|
|
static void __init
|
|
luan_setup_hose(struct pci_controller *hose,
|
|
int lower_mem,
|
|
int upper_mem,
|
|
int cfga,
|
|
int cfgd,
|
|
u64 pcix_io_base)
|
|
{
|
|
char name[20];
|
|
|
|
sprintf(name, "PCIX%d host bridge", hose->index);
|
|
|
|
hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
|
|
|
|
pci_init_resource(&hose->io_resource,
|
|
LUAN_PCIX_LOWER_IO,
|
|
LUAN_PCIX_UPPER_IO,
|
|
IORESOURCE_IO,
|
|
name);
|
|
|
|
pci_init_resource(&hose->mem_resources[0],
|
|
lower_mem,
|
|
upper_mem,
|
|
IORESOURCE_MEM,
|
|
name);
|
|
|
|
hose->io_space.start = LUAN_PCIX_LOWER_IO;
|
|
hose->io_space.end = LUAN_PCIX_UPPER_IO;
|
|
hose->mem_space.start = lower_mem;
|
|
hose->mem_space.end = upper_mem;
|
|
hose->io_base_virt = ioremap64(pcix_io_base, PCIX_IO_SIZE);
|
|
isa_io_base = (unsigned long) hose->io_base_virt;
|
|
|
|
setup_indirect_pci(hose, cfga, cfgd);
|
|
hose->set_cfg_type = 1;
|
|
}
|
|
|
|
static void __init
|
|
luan_setup_hoses(void)
|
|
{
|
|
struct pci_controller *hose1, *hose2;
|
|
|
|
/* Configure windows on the PCI-X host bridge */
|
|
luan_setup_pcix();
|
|
|
|
/* Allocate hoses for PCIX1 and PCIX2 */
|
|
hose1 = pcibios_alloc_controller();
|
|
hose2 = pcibios_alloc_controller();
|
|
if (!hose1 || !hose2)
|
|
return;
|
|
|
|
/* Setup PCIX1 */
|
|
hose1->first_busno = 0;
|
|
hose1->last_busno = 0xff;
|
|
|
|
luan_setup_hose(hose1,
|
|
LUAN_PCIX1_LOWER_MEM,
|
|
LUAN_PCIX1_UPPER_MEM,
|
|
PCIX1_CFGA,
|
|
PCIX1_CFGD,
|
|
PCIX1_IO_BASE);
|
|
|
|
hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
|
|
|
|
/* Setup PCIX2 */
|
|
hose2->first_busno = hose1->last_busno + 1;
|
|
hose2->last_busno = 0xff;
|
|
|
|
luan_setup_hose(hose2,
|
|
LUAN_PCIX2_LOWER_MEM,
|
|
LUAN_PCIX2_UPPER_MEM,
|
|
PCIX2_CFGA,
|
|
PCIX2_CFGD,
|
|
PCIX2_IO_BASE);
|
|
|
|
hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
|
|
|
|
ppc_md.pci_swizzle = common_swizzle;
|
|
ppc_md.pci_map_irq = luan_map_irq;
|
|
}
|
|
|
|
TODC_ALLOC();
|
|
|
|
static void __init
|
|
luan_early_serial_map(void)
|
|
{
|
|
struct uart_port port;
|
|
|
|
/* Setup ioremapped serial port access */
|
|
memset(&port, 0, sizeof(port));
|
|
port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
|
|
port.irq = UART0_INT;
|
|
port.uartclk = clocks.uart0;
|
|
port.regshift = 0;
|
|
port.iotype = SERIAL_IO_MEM;
|
|
port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
|
|
port.line = 0;
|
|
|
|
if (early_serial_setup(&port) != 0) {
|
|
printk("Early serial init of port 0 failed\n");
|
|
}
|
|
|
|
port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
|
|
port.irq = UART1_INT;
|
|
port.uartclk = clocks.uart1;
|
|
port.line = 1;
|
|
|
|
if (early_serial_setup(&port) != 0) {
|
|
printk("Early serial init of port 1 failed\n");
|
|
}
|
|
|
|
port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
|
|
port.irq = UART2_INT;
|
|
port.uartclk = BASE_BAUD;
|
|
port.line = 2;
|
|
|
|
if (early_serial_setup(&port) != 0) {
|
|
printk("Early serial init of port 2 failed\n");
|
|
}
|
|
}
|
|
|
|
static void __init
|
|
luan_setup_arch(void)
|
|
{
|
|
luan_set_emacdata();
|
|
|
|
#if !defined(CONFIG_BDI_SWITCH)
|
|
/*
|
|
* The Abatron BDI JTAG debugger does not tolerate others
|
|
* mucking with the debug registers.
|
|
*/
|
|
mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
|
|
#endif
|
|
|
|
/*
|
|
* Determine various clocks.
|
|
* To be completely correct we should get SysClk
|
|
* from FPGA, because it can be changed by on-board switches
|
|
* --ebs
|
|
*/
|
|
/* 440GX and 440SP clocking is the same -mdp */
|
|
ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
|
|
ocp_sys_info.opb_bus_freq = clocks.opb;
|
|
|
|
/* init to some ~sane value until calibrate_delay() runs */
|
|
loops_per_jiffy = 50000000/HZ;
|
|
|
|
/* Setup PCIXn host bridges */
|
|
luan_setup_hoses();
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
if (initrd_start)
|
|
ROOT_DEV = Root_RAM0;
|
|
else
|
|
#endif
|
|
#ifdef CONFIG_ROOT_NFS
|
|
ROOT_DEV = Root_NFS;
|
|
#else
|
|
ROOT_DEV = Root_HDA1;
|
|
#endif
|
|
|
|
luan_early_serial_map();
|
|
|
|
/* Identify the system */
|
|
printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
|
|
}
|
|
|
|
void __init platform_init(unsigned long r3, unsigned long r4,
|
|
unsigned long r5, unsigned long r6, unsigned long r7)
|
|
{
|
|
parse_bootinfo(find_bootinfo());
|
|
|
|
/*
|
|
* If we were passed in a board information, copy it into the
|
|
* residual data area.
|
|
*/
|
|
if (r3)
|
|
__res = *(bd_t *)(r3 + KERNELBASE);
|
|
|
|
ibm44x_platform_init();
|
|
|
|
ppc_md.setup_arch = luan_setup_arch;
|
|
ppc_md.show_cpuinfo = luan_show_cpuinfo;
|
|
ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
|
|
ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */
|
|
|
|
ppc_md.calibrate_decr = luan_calibrate_decr;
|
|
#ifdef CONFIG_KGDB
|
|
ppc_md.early_serial_map = luan_early_serial_map;
|
|
#endif
|
|
}
|