165 lines
7.0 KiB
ReStructuredText
165 lines
7.0 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
.. include:: <isonum.txt>
|
|
|
|
Kernel driver dell-smm-hwmon
|
|
============================
|
|
|
|
:Copyright: |copy| 2002-2005 Massimo Dal Zotto <dz@debian.org>
|
|
:Copyright: |copy| 2019 Giovanni Mascellani <gio@debian.org>
|
|
|
|
Description
|
|
-----------
|
|
|
|
On many Dell laptops the System Management Mode (SMM) BIOS can be
|
|
queried for the status of fans and temperature sensors. Userspace
|
|
utilities like ``sensors`` can be used to return the readings. The
|
|
userspace suite `i8kutils`__ can also be used to read the sensors and
|
|
automatically adjust fan speed (please notice that it currently uses
|
|
the deprecated ``/proc/i8k`` interface).
|
|
|
|
__ https://github.com/vitorafsr/i8kutils
|
|
|
|
``sysfs`` interface
|
|
-------------------
|
|
|
|
Temperature sensors and fans can be queried and set via the standard
|
|
``hwmon`` interface on ``sysfs``, under the directory
|
|
``/sys/class/hwmon/hwmonX`` for some value of ``X`` (search for the
|
|
``X`` such that ``/sys/class/hwmon/hwmonX/name`` has content
|
|
``dell_smm``). A number of other attributes can be read or written:
|
|
|
|
=============================== ======= =======================================
|
|
Name Perm Description
|
|
=============================== ======= =======================================
|
|
fan[1-3]_input RO Fan speed in RPM.
|
|
fan[1-3]_label RO Fan label.
|
|
pwm[1-3] RW Control the fan PWM duty-cycle.
|
|
pwm1_enable WO Enable or disable automatic BIOS fan
|
|
control (not supported on all laptops,
|
|
see below for details).
|
|
temp[1-10]_input RO Temperature reading in milli-degrees
|
|
Celsius.
|
|
temp[1-10]_label RO Temperature sensor label.
|
|
=============================== ======= =======================================
|
|
|
|
Disabling automatic BIOS fan control
|
|
------------------------------------
|
|
|
|
On some laptops the BIOS automatically sets fan speed every few
|
|
seconds. Therefore the fan speed set by mean of this driver is quickly
|
|
overwritten.
|
|
|
|
There is experimental support for disabling automatic BIOS fan
|
|
control, at least on laptops where the corresponding SMM command is
|
|
known, by writing the value ``1`` in the attribute ``pwm1_enable``
|
|
(writing ``2`` enables automatic BIOS control again). Even if you have
|
|
more than one fan, all of them are set to either enabled or disabled
|
|
automatic fan control at the same time and, notwithstanding the name,
|
|
``pwm1_enable`` sets automatic control for all fans.
|
|
|
|
If ``pwm1_enable`` is not available, then it means that SMM codes for
|
|
enabling and disabling automatic BIOS fan control are not whitelisted
|
|
for your hardware. It is possible that codes that work for other
|
|
laptops actually work for yours as well, or that you have to discover
|
|
new codes.
|
|
|
|
Check the list ``i8k_whitelist_fan_control`` in file
|
|
``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree: as a first
|
|
attempt you can try to add your machine and use an already-known code
|
|
pair. If, after recompiling the kernel, you see that ``pwm1_enable``
|
|
is present and works (i.e., you can manually control the fan speed),
|
|
then please submit your finding as a kernel patch, so that other users
|
|
can benefit from it. Please see
|
|
:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
|
|
for information on submitting patches.
|
|
|
|
If no known code works on your machine, you need to resort to do some
|
|
probing, because unfortunately Dell does not publish datasheets for
|
|
its SMM. You can experiment with the code in `this repository`__ to
|
|
probe the BIOS on your machine and discover the appropriate codes.
|
|
|
|
__ https://github.com/clopez/dellfan/
|
|
|
|
Again, when you find new codes, we'd be happy to have your patches!
|
|
|
|
Module parameters
|
|
-----------------
|
|
|
|
* force:bool
|
|
Force loading without checking for supported
|
|
models. (default: 0)
|
|
|
|
* ignore_dmi:bool
|
|
Continue probing hardware even if DMI data does not
|
|
match. (default: 0)
|
|
|
|
* restricted:bool
|
|
Allow fan control only to processes with the
|
|
``CAP_SYS_ADMIN`` capability set or processes run
|
|
as root when using the legacy ``/proc/i8k``
|
|
interface. In this case normal users will be able
|
|
to read temperature and fan status but not to
|
|
control the fan. If your notebook is shared with
|
|
other users and you don't trust them you may want
|
|
to use this option. (default: 1, only available
|
|
with ``CONFIG_I8K``)
|
|
|
|
* power_status:bool
|
|
Report AC status in ``/proc/i8k``. (default: 0,
|
|
only available with ``CONFIG_I8K``)
|
|
|
|
* fan_mult:uint
|
|
Factor to multiply fan speed with. (default:
|
|
autodetect)
|
|
|
|
* fan_max:uint
|
|
Maximum configurable fan speed. (default:
|
|
autodetect)
|
|
|
|
Legacy ``/proc`` interface
|
|
--------------------------
|
|
|
|
.. warning:: This interface is obsolete and deprecated and should not
|
|
used in new applications. This interface is only
|
|
available when kernel is compiled with option
|
|
``CONFIG_I8K``.
|
|
|
|
The information provided by the kernel driver can be accessed by
|
|
simply reading the ``/proc/i8k`` file. For example::
|
|
|
|
$ cat /proc/i8k
|
|
1.0 A17 2J59L02 52 2 1 8040 6420 1 2
|
|
|
|
The fields read from ``/proc/i8k`` are::
|
|
|
|
1.0 A17 2J59L02 52 2 1 8040 6420 1 2
|
|
| | | | | | | | | |
|
|
| | | | | | | | | +------- 10. buttons status
|
|
| | | | | | | | +--------- 9. AC status
|
|
| | | | | | | +-------------- 8. fan0 RPM
|
|
| | | | | | +------------------- 7. fan1 RPM
|
|
| | | | | +--------------------- 6. fan0 status
|
|
| | | | +----------------------- 5. fan1 status
|
|
| | | +-------------------------- 4. temp0 reading (Celsius)
|
|
| | +---------------------------------- 3. Dell service tag (later known as 'serial number')
|
|
| +-------------------------------------- 2. BIOS version
|
|
+------------------------------------------ 1. /proc/i8k format version
|
|
|
|
A negative value, for example -22, indicates that the BIOS doesn't
|
|
return the corresponding information. This is normal on some
|
|
models/BIOSes.
|
|
|
|
For performance reasons the ``/proc/i8k`` doesn't report by default
|
|
the AC status since this SMM call takes a long time to execute and is
|
|
not really needed. If you want to see the ac status in ``/proc/i8k``
|
|
you must explictitly enable this option by passing the
|
|
``power_status=1`` parameter to insmod. If AC status is not
|
|
available -1 is printed instead.
|
|
|
|
The driver provides also an ioctl interface which can be used to
|
|
obtain the same information and to control the fan status. The ioctl
|
|
interface can be accessed from C programs or from shell using the
|
|
i8kctl utility. See the source file of ``i8kutils`` for more
|
|
information on how to use the ioctl interface.
|