OpenCloudOS-Kernel/arch/arm/boot/dts/rk322x.dtsi

1123 lines
28 KiB
Plaintext

/*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3228-cru.h>
#include <dt-bindings/thermal/thermal.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
spi0 = &spi0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@f00 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
resets = <&cru SRST_CORE0>;
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
clock-latency = <40000>;
clocks = <&cru ARMCLK>;
enable-method = "psci";
};
cpu1: cpu@f01 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf01>;
resets = <&cru SRST_CORE1>;
operating-points-v2 = <&cpu0_opp_table>;
enable-method = "psci";
};
cpu2: cpu@f02 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf02>;
resets = <&cru SRST_CORE2>;
operating-points-v2 = <&cpu0_opp_table>;
enable-method = "psci";
};
cpu3: cpu@f03 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf03>;
resets = <&cru SRST_CORE3>;
operating-points-v2 = <&cpu0_opp_table>;
enable-method = "psci";
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000>;
clock-latency-ns = <40000>;
opp-suspend;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1000000>;
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1175000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1275000>;
};
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pdma: pdma@110f0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x110f0000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
clocks = <&cru ACLK_DMAC>;
clock-names = "apb_pclk";
};
};
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv7-timer";
arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
};
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xin24m";
#clock-cells = <0>;
};
i2s1: i2s1@100b0000 {
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100b0000 0x4000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
dmas = <&pdma 14>, <&pdma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
status = "disabled";
};
i2s0: i2s0@100c0000 {
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100c0000 0x4000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
dmas = <&pdma 11>, <&pdma 12>;
dma-names = "tx", "rx";
status = "disabled";
};
spdif: spdif@100d0000 {
compatible = "rockchip,rk3228-spdif";
reg = <0x100d0000 0x1000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
clock-names = "mclk", "hclk";
dmas = <&pdma 10>;
dma-names = "tx";
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx>;
status = "disabled";
};
i2s2: i2s2@100e0000 {
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100e0000 0x4000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2s_clk", "i2s_hclk";
clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
dmas = <&pdma 0>, <&pdma 1>;
dma-names = "tx", "rx";
status = "disabled";
};
grf: syscon@11000000 {
compatible = "rockchip,rk3228-grf", "syscon", "simple-mfd";
reg = <0x11000000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
io_domains: io-domains {
compatible = "rockchip,rk3228-io-voltage-domain";
status = "disabled";
};
u2phy0: usb2-phy@760 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0760 0x0c>;
clocks = <&cru SCLK_OTGPHY0>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy0";
#clock-cells = <0>;
status = "disabled";
u2phy0_otg: otg-port {
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "otg-bvalid", "otg-id",
"linestate";
#phy-cells = <0>;
status = "disabled";
};
u2phy0_host: host-port {
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
#phy-cells = <0>;
status = "disabled";
};
};
u2phy1: usb2-phy@800 {
compatible = "rockchip,rk3228-usb2phy";
reg = <0x0800 0x0c>;
clocks = <&cru SCLK_OTGPHY1>;
clock-names = "phyclk";
clock-output-names = "usb480m_phy1";
#clock-cells = <0>;
status = "disabled";
u2phy1_otg: otg-port {
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
#phy-cells = <0>;
status = "disabled";
};
u2phy1_host: host-port {
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
#phy-cells = <0>;
status = "disabled";
};
};
};
uart0: serial@11010000 {
compatible = "snps,dw-apb-uart";
reg = <0x11010000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart1: serial@11020000 {
compatible = "snps,dw-apb-uart";
reg = <0x11020000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
uart2: serial@11030000 {
compatible = "snps,dw-apb-uart";
reg = <0x11030000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
efuse: efuse@11040000 {
compatible = "rockchip,rk3228-efuse";
reg = <0x11040000 0x20>;
clocks = <&cru PCLK_EFUSE_256>;
clock-names = "pclk_efuse";
#address-cells = <1>;
#size-cells = <1>;
/* Data cells */
efuse_id: id@7 {
reg = <0x7 0x10>;
};
cpu_leakage: cpu_leakage@17 {
reg = <0x17 0x1>;
};
};
i2c0: i2c@11050000 {
compatible = "rockchip,rk3228-i2c";
reg = <0x11050000 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
status = "disabled";
};
i2c1: i2c@11060000 {
compatible = "rockchip,rk3228-i2c";
reg = <0x11060000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
status = "disabled";
};
i2c2: i2c@11070000 {
compatible = "rockchip,rk3228-i2c";
reg = <0x11070000 0x1000>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
status = "disabled";
};
i2c3: i2c@11080000 {
compatible = "rockchip,rk3228-i2c";
reg = <0x11080000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
status = "disabled";
};
spi0: spi@11090000 {
compatible = "rockchip,rk3228-spi";
reg = <0x11090000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0 &spi0_cs1>;
status = "disabled";
};
wdt: watchdog@110a0000 {
compatible = "snps,dw-wdt";
reg = <0x110a0000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_CPU>;
status = "disabled";
};
pwm0: pwm@110b0000 {
compatible = "rockchip,rk3288-pwm";
reg = <0x110b0000 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
status = "disabled";
};
pwm1: pwm@110b0010 {
compatible = "rockchip,rk3288-pwm";
reg = <0x110b0010 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
status = "disabled";
};
pwm2: pwm@110b0020 {
compatible = "rockchip,rk3288-pwm";
reg = <0x110b0020 0x10>;
#pwm-cells = <3>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
status = "disabled";
};
pwm3: pwm@110b0030 {
compatible = "rockchip,rk3288-pwm";
reg = <0x110b0030 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM>;
clock-names = "pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
status = "disabled";
};
timer: timer@110c0000 {
compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
reg = <0x110c0000 0x20>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&xin24m>, <&cru PCLK_TIMER>;
clock-names = "timer", "pclk";
};
cru: clock-controller@110e0000 {
compatible = "rockchip,rk3228-cru";
reg = <0x110e0000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks =
<&cru PLL_GPLL>, <&cru ARMCLK>,
<&cru PLL_CPLL>, <&cru ACLK_PERI>,
<&cru HCLK_PERI>, <&cru PCLK_PERI>,
<&cru ACLK_CPU>, <&cru HCLK_CPU>,
<&cru PCLK_CPU>;
assigned-clock-rates =
<594000000>, <816000000>,
<500000000>, <150000000>,
<150000000>, <75000000>,
<150000000>, <150000000>,
<75000000>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <100>; /* milliseconds */
polling-delay = <5000>; /* milliseconds */
thermal-sensors = <&tsadc 0>;
trips {
cpu_alert0: cpu_alert0 {
temperature = <70000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_alert1: cpu_alert1 {
temperature = <75000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <90000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT 6>;
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
tsadc: tsadc@11150000 {
compatible = "rockchip,rk3228-tsadc";
reg = <0x11150000 0x100>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
clock-names = "tsadc", "apb_pclk";
assigned-clocks = <&cru SCLK_TSADC>;
assigned-clock-rates = <32768>;
resets = <&cru SRST_TSADC>;
reset-names = "tsadc-apb";
pinctrl-names = "init", "default", "sleep";
pinctrl-0 = <&otp_gpio>;
pinctrl-1 = <&otp_out>;
pinctrl-2 = <&otp_gpio>;
#thermal-sensor-cells = <0>;
rockchip,hw-tshut-temp = <95000>;
status = "disabled";
};
gpu: gpu@20000000 {
compatible = "rockchip,rk3228-mali", "arm,mali-400";
reg = <0x20000000 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "core", "bus";
resets = <&cru SRST_GPU_A>;
status = "disabled";
};
vpu_mmu: iommu@20020800 {
compatible = "rockchip,iommu";
reg = <0x20020800 0x100>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vpu_mmu";
clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
vdec_mmu: iommu@20030480 {
compatible = "rockchip,iommu";
reg = <0x20030480 0x40>, <0x200304c0 0x40>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vdec_mmu";
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
vop_mmu: iommu@20053f00 {
compatible = "rockchip,iommu";
reg = <0x20053f00 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vop_mmu";
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
iep_mmu: iommu@20070800 {
compatible = "rockchip,iommu";
reg = <0x20070800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
clock-names = "aclk", "iface";
iommu-cells = <0>;
status = "disabled";
};
sdmmc: dwmmc@30000000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30000000 0x4000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
status = "disabled";
};
sdio: dwmmc@30010000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30010000 0x4000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
status = "disabled";
};
emmc: dwmmc@30020000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30020000 0x4000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <37500000>;
max-frequency = <37500000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
bus-width = <8>;
default-sample-phase = <158>;
fifo-depth = <0x100>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
resets = <&cru SRST_EMMC>;
reset-names = "reset";
status = "disabled";
};
usb_otg: usb@30040000 {
compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb",
"snps,dwc2";
reg = <0x30040000 0x40000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_OTG>;
clock-names = "otg";
dr_mode = "otg";
g-np-tx-fifo-size = <16>;
g-rx-fifo-size = <280>;
g-tx-fifo-size = <256 128 128 64 32 16>;
g-use-dma;
phys = <&u2phy0_otg>;
phy-names = "usb2-phy";
status = "disabled";
};
usb_host0_ehci: usb@30080000 {
compatible = "generic-ehci";
reg = <0x30080000 0x20000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy0>;
clock-names = "usbhost", "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
};
usb_host0_ohci: usb@300a0000 {
compatible = "generic-ohci";
reg = <0x300a0000 0x20000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy0>;
clock-names = "usbhost", "utmi";
phys = <&u2phy0_host>;
phy-names = "usb";
status = "disabled";
};
usb_host1_ehci: usb@300c0000 {
compatible = "generic-ehci";
reg = <0x300c0000 0x20000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST1>, <&u2phy1>;
clock-names = "usbhost", "utmi";
phys = <&u2phy1_otg>;
phy-names = "usb";
status = "disabled";
};
usb_host1_ohci: usb@300e0000 {
compatible = "generic-ohci";
reg = <0x300e0000 0x20000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST1>, <&u2phy1>;
clock-names = "usbhost", "utmi";
phys = <&u2phy1_otg>;
phy-names = "usb";
status = "disabled";
};
usb_host2_ehci: usb@30100000 {
compatible = "generic-ehci";
reg = <0x30100000 0x20000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST2>, <&u2phy1>;
phys = <&u2phy1_host>;
phy-names = "usb";
clock-names = "usbhost", "utmi";
status = "disabled";
};
usb_host2_ohci: usb@30120000 {
compatible = "generic-ohci";
reg = <0x30120000 0x20000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST2>, <&u2phy1>;
clock-names = "usbhost", "utmi";
phys = <&u2phy1_host>;
phy-names = "usb";
status = "disabled";
};
gmac: ethernet@30200000 {
compatible = "rockchip,rk3228-gmac";
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
<&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>;
clock-names = "stmmaceth", "mac_clk_rx",
"mac_clk_tx", "clk_mac_ref",
"clk_mac_refout", "aclk_mac",
"pclk_mac";
resets = <&cru SRST_GMAC>;
reset-names = "stmmaceth";
rockchip,grf = <&grf>;
status = "disabled";
};
gic: interrupt-controller@32010000 {
compatible = "arm,gic-400";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <0>;
reg = <0x32011000 0x1000>,
<0x32012000 0x2000>,
<0x32014000 0x2000>,
<0x32016000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
pinctrl: pinctrl {
compatible = "rockchip,rk3228-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
gpio0: gpio0@11110000 {
compatible = "rockchip,gpio-bank";
reg = <0x11110000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@11120000 {
compatible = "rockchip,gpio-bank";
reg = <0x11120000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@11130000 {
compatible = "rockchip,gpio-bank";
reg = <0x11130000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@11140000 {
compatible = "rockchip,gpio-bank";
reg = <0x11140000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
drive-strength = <12>;
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
<1 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
<1 RK_PC4 1 &pcfg_pull_none_drv_12ma>,
<1 RK_PC5 1 &pcfg_pull_none_drv_12ma>;
};
};
sdio {
sdio_clk: sdio-clk {
rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>;
};
sdio_cmd: sdio-cmd {
rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>;
};
sdio_bus4: sdio-bus4 {
rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>,
<3 RK_PA3 1 &pcfg_pull_none_drv_12ma>,
<3 RK_PA4 1 &pcfg_pull_none_drv_12ma>,
<3 RK_PA5 1 &pcfg_pull_none_drv_12ma>;
};
};
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
};
emmc_cmd: emmc-cmd {
rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
};
emmc_bus8: emmc-bus8 {
rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
<1 25 RK_FUNC_2 &pcfg_pull_none>,
<1 26 RK_FUNC_2 &pcfg_pull_none>,
<1 27 RK_FUNC_2 &pcfg_pull_none>,
<1 28 RK_FUNC_2 &pcfg_pull_none>,
<1 29 RK_FUNC_2 &pcfg_pull_none>,
<1 30 RK_FUNC_2 &pcfg_pull_none>,
<1 31 RK_FUNC_2 &pcfg_pull_none>;
};
};
gmac {
rgmii_pins: rgmii-pins {
rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
<2 12 RK_FUNC_1 &pcfg_pull_none>,
<2 25 RK_FUNC_1 &pcfg_pull_none>,
<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 17 RK_FUNC_1 &pcfg_pull_none>,
<2 16 RK_FUNC_1 &pcfg_pull_none>,
<2 21 RK_FUNC_2 &pcfg_pull_none>,
<2 20 RK_FUNC_2 &pcfg_pull_none>,
<2 11 RK_FUNC_1 &pcfg_pull_none>,
<2 8 RK_FUNC_1 &pcfg_pull_none>;
};
rmii_pins: rmii-pins {
rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
<2 12 RK_FUNC_1 &pcfg_pull_none>,
<2 25 RK_FUNC_1 &pcfg_pull_none>,
<2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
<2 17 RK_FUNC_1 &pcfg_pull_none>,
<2 16 RK_FUNC_1 &pcfg_pull_none>,
<2 8 RK_FUNC_1 &pcfg_pull_none>,
<2 15 RK_FUNC_1 &pcfg_pull_none>;
};
phy_pins: phy-pins {
rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>,
<2 8 RK_FUNC_2 &pcfg_pull_none>;
};
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
<0 1 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
<0 3 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
<2 21 RK_FUNC_1 &pcfg_pull_none>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
<0 7 RK_FUNC_1 &pcfg_pull_none>;
};
};
spi-0 {
spi0_clk: spi0-clk {
rockchip,pins = <0 9 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_cs0: spi0-cs0 {
rockchip,pins = <0 14 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_tx: spi0-tx {
rockchip,pins = <0 11 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_rx: spi0-rx {
rockchip,pins = <0 13 RK_FUNC_2 &pcfg_pull_up>;
};
spi0_cs1: spi0-cs1 {
rockchip,pins = <1 12 RK_FUNC_1 &pcfg_pull_up>;
};
};
spi-1 {
spi1_clk: spi1-clk {
rockchip,pins = <0 23 RK_FUNC_2 &pcfg_pull_up>;
};
spi1_cs0: spi1-cs0 {
rockchip,pins = <2 2 RK_FUNC_2 &pcfg_pull_up>;
};
spi1_rx: spi1-rx {
rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_up>;
};
spi1_tx: spi1-tx {
rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_up>;
};
spi1_cs1: spi1-cs1 {
rockchip,pins = <2 3 RK_FUNC_2 &pcfg_pull_up>;
};
};
i2s1 {
i2s1_bus: i2s1-bus {
rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
<0 9 RK_FUNC_1 &pcfg_pull_none>,
<0 11 RK_FUNC_1 &pcfg_pull_none>,
<0 12 RK_FUNC_1 &pcfg_pull_none>,
<0 13 RK_FUNC_1 &pcfg_pull_none>,
<0 14 RK_FUNC_1 &pcfg_pull_none>,
<1 2 RK_FUNC_2 &pcfg_pull_none>,
<1 4 RK_FUNC_2 &pcfg_pull_none>,
<1 5 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
};
};
spdif {
spdif_tx: spdif-tx {
rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>;
};
};
tsadc {
otp_gpio: otp-gpio {
rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
};
otp_out: otp-out {
rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
<2 27 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_cts: uart0-cts {
rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
<1 10 RK_FUNC_1 &pcfg_pull_none>;
};
uart1_cts: uart1-cts {
rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart2 {
uart2_xfer: uart2-xfer {
rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up>,
<1 19 RK_FUNC_2 &pcfg_pull_none>;
};
uart21_xfer: uart21-xfer {
rockchip,pins = <1 10 RK_FUNC_2 &pcfg_pull_up>,
<1 9 RK_FUNC_2 &pcfg_pull_none>;
};
uart2_cts: uart2-cts {
rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
};
uart2_rts: uart2-rts {
rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
};