1433 lines
45 KiB
C
1433 lines
45 KiB
C
/* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
|
|
/*
|
|
Written 1997-2001 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
|
|
It also supports the Symbios Logic version of the same chip core.
|
|
|
|
The author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
Support and updates available at
|
|
http://www.scyld.com/network/yellowfin.html
|
|
[link no longer provides useful info -jgarzik]
|
|
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#define DRV_NAME "yellowfin"
|
|
#define DRV_VERSION "2.1"
|
|
#define DRV_RELDATE "Sep 11, 2006"
|
|
|
|
/* The user-configurable values.
|
|
These may be modified when a driver module is loaded.*/
|
|
|
|
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
|
|
static int max_interrupt_work = 20;
|
|
static int mtu;
|
|
#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
|
|
/* System-wide count of bogus-rx frames. */
|
|
static int bogus_rx;
|
|
static int dma_ctrl = 0x004A0263; /* Constrained by errata */
|
|
static int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
|
|
#elif defined(YF_NEW) /* A future perfect board :->. */
|
|
static int dma_ctrl = 0x00CAC277; /* Override when loading module! */
|
|
static int fifo_cfg = 0x0028;
|
|
#else
|
|
static const int dma_ctrl = 0x004A0263; /* Constrained by errata */
|
|
static const int fifo_cfg = 0x0020; /* Bypass external Tx FIFO. */
|
|
#endif
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
Setting to > 1514 effectively disables this feature. */
|
|
static int rx_copybreak;
|
|
|
|
/* Used to pass the media type, etc.
|
|
No media types are currently defined. These exist for driver
|
|
interoperability.
|
|
*/
|
|
#define MAX_UNITS 8 /* More are supported, limit only on options */
|
|
static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
|
|
|
|
/* Do ugly workaround for GX server chipset errata. */
|
|
static int gx_fix;
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
|
|
/* Keep the ring sizes a power of two for efficiency.
|
|
Making the Tx ring too long decreases the effectiveness of channel
|
|
bonding and packet priority.
|
|
There are no ill effects from too-large receive rings. */
|
|
#define TX_RING_SIZE 16
|
|
#define TX_QUEUE_SIZE 12 /* Must be > 4 && <= TX_RING_SIZE */
|
|
#define RX_RING_SIZE 64
|
|
#define STATUS_TOTAL_SIZE TX_RING_SIZE*sizeof(struct tx_status_words)
|
|
#define TX_TOTAL_SIZE 2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
|
|
#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct yellowfin_desc)
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
|
|
|
|
#define yellowfin_debug debug
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/unaligned.h>
|
|
#include <asm/io.h>
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
static const char version[] __devinitconst =
|
|
KERN_INFO DRV_NAME ".c:v1.05 1/09/2001 Written by Donald Becker <becker@scyld.com>\n"
|
|
" (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
|
|
MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(max_interrupt_work, int, 0);
|
|
module_param(mtu, int, 0);
|
|
module_param(debug, int, 0);
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param_array(options, int, NULL, 0);
|
|
module_param_array(full_duplex, int, NULL, 0);
|
|
module_param(gx_fix, int, 0);
|
|
MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
|
|
MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
|
|
MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
|
|
MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
|
|
MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
|
|
MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
|
|
MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
|
|
|
|
/*
|
|
Theory of Operation
|
|
|
|
I. Board Compatibility
|
|
|
|
This device driver is designed for the Packet Engines "Yellowfin" Gigabit
|
|
Ethernet adapter. The G-NIC 64-bit PCI card is supported, as well as the
|
|
Symbios 53C885E dual function chip.
|
|
|
|
II. Board-specific settings
|
|
|
|
PCI bus devices are configured by the system at boot time, so no jumpers
|
|
need to be set on the board. The system BIOS preferably should assign the
|
|
PCI INTA signal to an otherwise unused system IRQ line.
|
|
Note: Kernel versions earlier than 1.3.73 do not support shared PCI
|
|
interrupt lines.
|
|
|
|
III. Driver operation
|
|
|
|
IIIa. Ring buffers
|
|
|
|
The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
|
|
This is a descriptor list scheme similar to that used by the EEPro100 and
|
|
Tulip. This driver uses two statically allocated fixed-size descriptor lists
|
|
formed into rings by a branch from the final descriptor to the beginning of
|
|
the list. The ring sizes are set at compile time by RX/TX_RING_SIZE.
|
|
|
|
The driver allocates full frame size skbuffs for the Rx ring buffers at
|
|
open() time and passes the skb->data field to the Yellowfin as receive data
|
|
buffers. When an incoming frame is less than RX_COPYBREAK bytes long,
|
|
a fresh skbuff is allocated and the frame is copied to the new skbuff.
|
|
When the incoming frame is larger, the skbuff is passed directly up the
|
|
protocol stack and replaced by a newly allocated skbuff.
|
|
|
|
The RX_COPYBREAK value is chosen to trade-off the memory wasted by
|
|
using a full-sized skbuff for small frames vs. the copying costs of larger
|
|
frames. For small frames the copying cost is negligible (esp. considering
|
|
that we are pre-loading the cache with immediately useful header
|
|
information). For large frames the copying cost is non-trivial, and the
|
|
larger copy might flush the cache of useful data.
|
|
|
|
IIIC. Synchronization
|
|
|
|
The driver runs as two independent, single-threaded flows of control. One
|
|
is the send-packet routine, which enforces single-threaded use by the
|
|
dev->tbusy flag. The other thread is the interrupt handler, which is single
|
|
threaded by the hardware and other software.
|
|
|
|
The send packet thread has partial control over the Tx ring and 'dev->tbusy'
|
|
flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next
|
|
queue slot is empty, it clears the tbusy flag when finished otherwise it sets
|
|
the 'yp->tx_full' flag.
|
|
|
|
The interrupt handler has exclusive control over the Rx ring and records stats
|
|
from the Tx ring. After reaping the stats, it marks the Tx queue entry as
|
|
empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
|
|
clears both the tx_full and tbusy flags.
|
|
|
|
IV. Notes
|
|
|
|
Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
|
|
Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
|
|
and an AlphaStation to verifty the Alpha port!
|
|
|
|
IVb. References
|
|
|
|
Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
|
|
Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
|
|
Data Manual v3.0
|
|
http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
|
|
http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
|
|
|
|
IVc. Errata
|
|
|
|
See Packet Engines confidential appendix (prototype chips only).
|
|
*/
|
|
|
|
|
|
|
|
enum capability_flags {
|
|
HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
|
|
HasMACAddrBug=32, /* Only on early revs. */
|
|
DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
|
|
};
|
|
|
|
/* The PCI I/O space extent. */
|
|
enum {
|
|
YELLOWFIN_SIZE = 0x100,
|
|
};
|
|
|
|
struct pci_id_info {
|
|
const char *name;
|
|
struct match_info {
|
|
int pci, pci_mask, subsystem, subsystem_mask;
|
|
int revision, revision_mask; /* Only 8 bits. */
|
|
} id;
|
|
int drv_flags; /* Driver use, intended as capability flags. */
|
|
};
|
|
|
|
static const struct pci_id_info pci_id_tbl[] = {
|
|
{"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
|
|
FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
|
|
{"Symbios SYM83C885", { 0x07011000, 0xffffffff},
|
|
HasMII | DontUseEeprom },
|
|
{ }
|
|
};
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(yellowfin_pci_tbl) = {
|
|
{ 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
|
|
{ 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
|
|
|
|
|
|
/* Offsets to the Yellowfin registers. Various sizes and alignments. */
|
|
enum yellowfin_offsets {
|
|
TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
|
|
TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
|
|
RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
|
|
RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
|
|
EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
|
|
ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
|
|
Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
|
|
MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
|
|
MII_Status=0xAE,
|
|
RxDepth=0xB8, FlowCtrl=0xBC,
|
|
AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
|
|
EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
|
|
EEFeature=0xF5,
|
|
};
|
|
|
|
/* The Yellowfin Rx and Tx buffer descriptors.
|
|
Elements are written as 32 bit for endian portability. */
|
|
struct yellowfin_desc {
|
|
__le32 dbdma_cmd;
|
|
__le32 addr;
|
|
__le32 branch_addr;
|
|
__le32 result_status;
|
|
};
|
|
|
|
struct tx_status_words {
|
|
#ifdef __BIG_ENDIAN
|
|
u16 tx_errs;
|
|
u16 tx_cnt;
|
|
u16 paused;
|
|
u16 total_tx_cnt;
|
|
#else /* Little endian chips. */
|
|
u16 tx_cnt;
|
|
u16 tx_errs;
|
|
u16 total_tx_cnt;
|
|
u16 paused;
|
|
#endif /* __BIG_ENDIAN */
|
|
};
|
|
|
|
/* Bits in yellowfin_desc.cmd */
|
|
enum desc_cmd_bits {
|
|
CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
|
|
CMD_NOP=0x60000000, CMD_STOP=0x70000000,
|
|
BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
|
|
BRANCH_IFTRUE=0x040000,
|
|
};
|
|
|
|
/* Bits in yellowfin_desc.status */
|
|
enum desc_status_bits { RX_EOP=0x0040, };
|
|
|
|
/* Bits in the interrupt status/mask registers. */
|
|
enum intr_status_bits {
|
|
IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
|
|
IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
|
|
IntrEarlyRx=0x100, IntrWakeup=0x200, };
|
|
|
|
#define PRIV_ALIGN 31 /* Required alignment mask */
|
|
#define MII_CNT 4
|
|
struct yellowfin_private {
|
|
/* Descriptor rings first for alignment.
|
|
Tx requires a second descriptor for status. */
|
|
struct yellowfin_desc *rx_ring;
|
|
struct yellowfin_desc *tx_ring;
|
|
struct sk_buff* rx_skbuff[RX_RING_SIZE];
|
|
struct sk_buff* tx_skbuff[TX_RING_SIZE];
|
|
dma_addr_t rx_ring_dma;
|
|
dma_addr_t tx_ring_dma;
|
|
|
|
struct tx_status_words *tx_status;
|
|
dma_addr_t tx_status_dma;
|
|
|
|
struct timer_list timer; /* Media selection timer. */
|
|
/* Frequently used and paired value: keep adjacent for cache effect. */
|
|
int chip_id, drv_flags;
|
|
struct pci_dev *pci_dev;
|
|
unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */
|
|
unsigned int rx_buf_sz; /* Based on MTU+slack. */
|
|
struct tx_status_words *tx_tail_desc;
|
|
unsigned int cur_tx, dirty_tx;
|
|
int tx_threshold;
|
|
unsigned int tx_full:1; /* The Tx queue is full. */
|
|
unsigned int full_duplex:1; /* Full-duplex operation requested. */
|
|
unsigned int duplex_lock:1;
|
|
unsigned int medialock:1; /* Do not sense media. */
|
|
unsigned int default_port:4; /* Last dev->if_port value. */
|
|
/* MII transceiver section. */
|
|
int mii_cnt; /* MII device addresses. */
|
|
u16 advertising; /* NWay media advertisement */
|
|
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used */
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static int read_eeprom(void __iomem *ioaddr, int location);
|
|
static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
|
|
static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int yellowfin_open(struct net_device *dev);
|
|
static void yellowfin_timer(unsigned long data);
|
|
static void yellowfin_tx_timeout(struct net_device *dev);
|
|
static int yellowfin_init_ring(struct net_device *dev);
|
|
static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev);
|
|
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
|
|
static int yellowfin_rx(struct net_device *dev);
|
|
static void yellowfin_error(struct net_device *dev, int intr_status);
|
|
static int yellowfin_close(struct net_device *dev);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
static const struct ethtool_ops ethtool_ops;
|
|
|
|
static const struct net_device_ops netdev_ops = {
|
|
.ndo_open = yellowfin_open,
|
|
.ndo_stop = yellowfin_close,
|
|
.ndo_start_xmit = yellowfin_start_xmit,
|
|
.ndo_set_multicast_list = set_rx_mode,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_do_ioctl = netdev_ioctl,
|
|
.ndo_tx_timeout = yellowfin_tx_timeout,
|
|
};
|
|
|
|
static int __devinit yellowfin_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
struct yellowfin_private *np;
|
|
int irq;
|
|
int chip_idx = ent->driver_data;
|
|
static int find_cnt;
|
|
void __iomem *ioaddr;
|
|
int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
|
|
int drv_flags = pci_id_tbl[chip_idx].drv_flags;
|
|
void *ring_space;
|
|
dma_addr_t ring_dma;
|
|
#ifdef USE_IO_OPS
|
|
int bar = 0;
|
|
#else
|
|
int bar = 1;
|
|
#endif
|
|
|
|
/* when built into the kernel, we only print version if device is found */
|
|
#ifndef MODULE
|
|
static int printed_version;
|
|
if (!printed_version++)
|
|
printk(version);
|
|
#endif
|
|
|
|
i = pci_enable_device(pdev);
|
|
if (i) return i;
|
|
|
|
dev = alloc_etherdev(sizeof(*np));
|
|
if (!dev) {
|
|
pr_err("cannot allocate ethernet device\n");
|
|
return -ENOMEM;
|
|
}
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
np = netdev_priv(dev);
|
|
|
|
if (pci_request_regions(pdev, DRV_NAME))
|
|
goto err_out_free_netdev;
|
|
|
|
pci_set_master (pdev);
|
|
|
|
ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
|
|
if (!ioaddr)
|
|
goto err_out_free_res;
|
|
|
|
irq = pdev->irq;
|
|
|
|
if (drv_flags & DontUseEeprom)
|
|
for (i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
|
|
else {
|
|
int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
|
|
for (i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
|
|
}
|
|
|
|
/* Reset the chip. */
|
|
iowrite32(0x80000000, ioaddr + DMACtrl);
|
|
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
dev->irq = irq;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
spin_lock_init(&np->lock);
|
|
|
|
np->pci_dev = pdev;
|
|
np->chip_id = chip_idx;
|
|
np->drv_flags = drv_flags;
|
|
np->base = ioaddr;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space)
|
|
goto err_out_cleardev;
|
|
np->tx_ring = (struct yellowfin_desc *)ring_space;
|
|
np->tx_ring_dma = ring_dma;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space)
|
|
goto err_out_unmap_tx;
|
|
np->rx_ring = (struct yellowfin_desc *)ring_space;
|
|
np->rx_ring_dma = ring_dma;
|
|
|
|
ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
|
|
if (!ring_space)
|
|
goto err_out_unmap_rx;
|
|
np->tx_status = (struct tx_status_words *)ring_space;
|
|
np->tx_status_dma = ring_dma;
|
|
|
|
if (dev->mem_start)
|
|
option = dev->mem_start;
|
|
|
|
/* The lower four bits are the media type. */
|
|
if (option > 0) {
|
|
if (option & 0x200)
|
|
np->full_duplex = 1;
|
|
np->default_port = option & 15;
|
|
if (np->default_port)
|
|
np->medialock = 1;
|
|
}
|
|
if (find_cnt < MAX_UNITS && full_duplex[find_cnt] > 0)
|
|
np->full_duplex = 1;
|
|
|
|
if (np->full_duplex)
|
|
np->duplex_lock = 1;
|
|
|
|
/* The Yellowfin-specific entries in the device structure. */
|
|
dev->netdev_ops = &netdev_ops;
|
|
SET_ETHTOOL_OPS(dev, ðtool_ops);
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
if (mtu)
|
|
dev->mtu = mtu;
|
|
|
|
i = register_netdev(dev);
|
|
if (i)
|
|
goto err_out_unmap_status;
|
|
|
|
netdev_info(dev, "%s type %8x at %p, %pM, IRQ %d\n",
|
|
pci_id_tbl[chip_idx].name,
|
|
ioread32(ioaddr + ChipRev), ioaddr,
|
|
dev->dev_addr, irq);
|
|
|
|
if (np->drv_flags & HasMII) {
|
|
int phy, phy_idx = 0;
|
|
for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
|
|
int mii_status = mdio_read(ioaddr, phy, 1);
|
|
if (mii_status != 0xffff && mii_status != 0x0000) {
|
|
np->phys[phy_idx++] = phy;
|
|
np->advertising = mdio_read(ioaddr, phy, 4);
|
|
netdev_info(dev, "MII PHY found at address %d, status 0x%04x advertising %04x\n",
|
|
phy, mii_status, np->advertising);
|
|
}
|
|
}
|
|
np->mii_cnt = phy_idx;
|
|
}
|
|
|
|
find_cnt++;
|
|
|
|
return 0;
|
|
|
|
err_out_unmap_status:
|
|
pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
|
|
np->tx_status_dma);
|
|
err_out_unmap_rx:
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
|
|
err_out_unmap_tx:
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
|
|
err_out_cleardev:
|
|
pci_set_drvdata(pdev, NULL);
|
|
pci_iounmap(pdev, ioaddr);
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
err_out_free_netdev:
|
|
free_netdev (dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int __devinit read_eeprom(void __iomem *ioaddr, int location)
|
|
{
|
|
int bogus_cnt = 10000; /* Typical 33Mhz: 1050 ticks */
|
|
|
|
iowrite8(location, ioaddr + EEAddr);
|
|
iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
|
|
while ((ioread8(ioaddr + EEStatus) & 0x80) && --bogus_cnt > 0)
|
|
;
|
|
return ioread8(ioaddr + EERead);
|
|
}
|
|
|
|
/* MII Managemen Data I/O accesses.
|
|
These routines assume the MDIO controller is idle, and do not exit until
|
|
the command is finished. */
|
|
|
|
static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
|
|
{
|
|
int i;
|
|
|
|
iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
|
|
iowrite16(1, ioaddr + MII_Cmd);
|
|
for (i = 10000; i >= 0; i--)
|
|
if ((ioread16(ioaddr + MII_Status) & 1) == 0)
|
|
break;
|
|
return ioread16(ioaddr + MII_Rd_Data);
|
|
}
|
|
|
|
static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
|
|
{
|
|
int i;
|
|
|
|
iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
|
|
iowrite16(value, ioaddr + MII_Wr_Data);
|
|
|
|
/* Wait for the command to finish. */
|
|
for (i = 10000; i >= 0; i--)
|
|
if ((ioread16(ioaddr + MII_Status) & 1) == 0)
|
|
break;
|
|
return;
|
|
}
|
|
|
|
|
|
static int yellowfin_open(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
void __iomem *ioaddr = yp->base;
|
|
int i, ret;
|
|
|
|
/* Reset the chip. */
|
|
iowrite32(0x80000000, ioaddr + DMACtrl);
|
|
|
|
ret = request_irq(dev->irq, yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (yellowfin_debug > 1)
|
|
netdev_printk(KERN_DEBUG, dev, "%s() irq %d\n",
|
|
__func__, dev->irq);
|
|
|
|
ret = yellowfin_init_ring(dev);
|
|
if (ret) {
|
|
free_irq(dev->irq, dev);
|
|
return ret;
|
|
}
|
|
|
|
iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
|
|
iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
|
|
|
|
for (i = 0; i < 6; i++)
|
|
iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
|
|
|
|
/* Set up various condition 'select' registers.
|
|
There are no options here. */
|
|
iowrite32(0x00800080, ioaddr + TxIntrSel); /* Interrupt on Tx abort */
|
|
iowrite32(0x00800080, ioaddr + TxBranchSel); /* Branch on Tx abort */
|
|
iowrite32(0x00400040, ioaddr + TxWaitSel); /* Wait on Tx status */
|
|
iowrite32(0x00400040, ioaddr + RxIntrSel); /* Interrupt on Rx done */
|
|
iowrite32(0x00400040, ioaddr + RxBranchSel); /* Branch on Rx error */
|
|
iowrite32(0x00400040, ioaddr + RxWaitSel); /* Wait on Rx done */
|
|
|
|
/* Initialize other registers: with so many this eventually this will
|
|
converted to an offset/value list. */
|
|
iowrite32(dma_ctrl, ioaddr + DMACtrl);
|
|
iowrite16(fifo_cfg, ioaddr + FIFOcfg);
|
|
/* Enable automatic generation of flow control frames, period 0xffff. */
|
|
iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
|
|
|
|
yp->tx_threshold = 32;
|
|
iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
|
|
|
|
if (dev->if_port == 0)
|
|
dev->if_port = yp->default_port;
|
|
|
|
netif_start_queue(dev);
|
|
|
|
/* Setting the Rx mode will start the Rx process. */
|
|
if (yp->drv_flags & IsGigabit) {
|
|
/* We are always in full-duplex mode with gigabit! */
|
|
yp->full_duplex = 1;
|
|
iowrite16(0x01CF, ioaddr + Cnfg);
|
|
} else {
|
|
iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
|
|
iowrite16(0x1018, ioaddr + FrameGap1);
|
|
iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
|
|
}
|
|
set_rx_mode(dev);
|
|
|
|
/* Enable interrupts by setting the interrupt mask. */
|
|
iowrite16(0x81ff, ioaddr + IntrEnb); /* See enum intr_status_bits */
|
|
iowrite16(0x0000, ioaddr + EventStatus); /* Clear non-interrupting events */
|
|
iowrite32(0x80008000, ioaddr + RxCtrl); /* Start Rx and Tx channels. */
|
|
iowrite32(0x80008000, ioaddr + TxCtrl);
|
|
|
|
if (yellowfin_debug > 2) {
|
|
netdev_printk(KERN_DEBUG, dev, "Done %s()\n", __func__);
|
|
}
|
|
|
|
/* Set the timer to check for link beat. */
|
|
init_timer(&yp->timer);
|
|
yp->timer.expires = jiffies + 3*HZ;
|
|
yp->timer.data = (unsigned long)dev;
|
|
yp->timer.function = &yellowfin_timer; /* timer handler */
|
|
add_timer(&yp->timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void yellowfin_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
void __iomem *ioaddr = yp->base;
|
|
int next_tick = 60*HZ;
|
|
|
|
if (yellowfin_debug > 3) {
|
|
netdev_printk(KERN_DEBUG, dev, "Yellowfin timer tick, status %08x\n",
|
|
ioread16(ioaddr + IntrStatus));
|
|
}
|
|
|
|
if (yp->mii_cnt) {
|
|
int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
|
|
int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
|
|
int negotiated = lpa & yp->advertising;
|
|
if (yellowfin_debug > 1)
|
|
netdev_printk(KERN_DEBUG, dev, "MII #%d status register is %04x, link partner capability %04x\n",
|
|
yp->phys[0], bmsr, lpa);
|
|
|
|
yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
|
|
|
|
iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
|
|
|
|
if (bmsr & BMSR_LSTATUS)
|
|
next_tick = 60*HZ;
|
|
else
|
|
next_tick = 3*HZ;
|
|
}
|
|
|
|
yp->timer.expires = jiffies + next_tick;
|
|
add_timer(&yp->timer);
|
|
}
|
|
|
|
static void yellowfin_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
void __iomem *ioaddr = yp->base;
|
|
|
|
netdev_warn(dev, "Yellowfin transmit timed out at %d/%d Tx status %04x, Rx status %04x, resetting...\n",
|
|
yp->cur_tx, yp->dirty_tx,
|
|
ioread32(ioaddr + TxStatus),
|
|
ioread32(ioaddr + RxStatus));
|
|
|
|
/* Note: these should be KERN_DEBUG. */
|
|
if (yellowfin_debug) {
|
|
int i;
|
|
pr_warning(" Rx ring %p: ", yp->rx_ring);
|
|
for (i = 0; i < RX_RING_SIZE; i++)
|
|
pr_cont(" %08x", yp->rx_ring[i].result_status);
|
|
pr_cont("\n");
|
|
pr_warning(" Tx ring %p: ", yp->tx_ring);
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
pr_cont(" %04x /%08x",
|
|
yp->tx_status[i].tx_errs,
|
|
yp->tx_ring[i].result_status);
|
|
pr_cont("\n");
|
|
}
|
|
|
|
/* If the hardware is found to hang regularly, we will update the code
|
|
to reinitialize the chip here. */
|
|
dev->if_port = 0;
|
|
|
|
/* Wake the potentially-idle transmit channel. */
|
|
iowrite32(0x10001000, yp->base + TxCtrl);
|
|
if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
|
|
netif_wake_queue (dev); /* Typical path */
|
|
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
dev->stats.tx_errors++;
|
|
}
|
|
|
|
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
|
|
static int yellowfin_init_ring(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
int i, j;
|
|
|
|
yp->tx_full = 0;
|
|
yp->cur_rx = yp->cur_tx = 0;
|
|
yp->dirty_tx = 0;
|
|
|
|
yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
yp->rx_ring[i].dbdma_cmd =
|
|
cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
|
|
yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
|
|
((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
|
|
}
|
|
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
|
|
yp->rx_skbuff[i] = skb;
|
|
if (skb == NULL)
|
|
break;
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header. */
|
|
yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
|
|
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
|
|
}
|
|
if (i != RX_RING_SIZE) {
|
|
for (j = 0; j < i; j++)
|
|
dev_kfree_skb(yp->rx_skbuff[j]);
|
|
return -ENOMEM;
|
|
}
|
|
yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
|
|
|
|
#define NO_TXSTATS
|
|
#ifdef NO_TXSTATS
|
|
/* In this mode the Tx ring needs only a single descriptor. */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
yp->tx_skbuff[i] = NULL;
|
|
yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
|
|
((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
|
|
}
|
|
/* Wrap ring */
|
|
yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
|
|
#else
|
|
{
|
|
/* Tx ring needs a pair of descriptors, the second for the status. */
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
j = 2*i;
|
|
yp->tx_skbuff[i] = 0;
|
|
/* Branch on Tx error. */
|
|
yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
|
|
(j+1)*sizeof(struct yellowfin_desc));
|
|
j++;
|
|
if (yp->flags & FullTxStatus) {
|
|
yp->tx_ring[j].dbdma_cmd =
|
|
cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
|
|
yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
|
|
yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
|
|
i*sizeof(struct tx_status_words));
|
|
} else {
|
|
/* Symbios chips write only tx_errs word. */
|
|
yp->tx_ring[j].dbdma_cmd =
|
|
cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
|
|
yp->tx_ring[j].request_cnt = 2;
|
|
/* Om pade ummmmm... */
|
|
yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
|
|
i*sizeof(struct tx_status_words) +
|
|
&(yp->tx_status[0].tx_errs) -
|
|
&(yp->tx_status[0]));
|
|
}
|
|
yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
|
|
((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
|
|
}
|
|
/* Wrap ring */
|
|
yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
|
|
}
|
|
#endif
|
|
yp->tx_tail_desc = &yp->tx_status[0];
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
unsigned entry;
|
|
int len = skb->len;
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
/* Note: Ordering is important here, set the field with the
|
|
"ownership" bit last, and only then increment cur_tx. */
|
|
|
|
/* Calculate the next Tx descriptor entry. */
|
|
entry = yp->cur_tx % TX_RING_SIZE;
|
|
|
|
if (gx_fix) { /* Note: only works for paddable protocols e.g. IP. */
|
|
int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
|
|
/* Fix GX chipset errata. */
|
|
if (cacheline_end > 24 || cacheline_end == 0) {
|
|
len = skb->len + 32 - cacheline_end + 1;
|
|
if (skb_padto(skb, len)) {
|
|
yp->tx_skbuff[entry] = NULL;
|
|
netif_wake_queue(dev);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
}
|
|
}
|
|
yp->tx_skbuff[entry] = skb;
|
|
|
|
#ifdef NO_TXSTATS
|
|
yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
|
|
skb->data, len, PCI_DMA_TODEVICE));
|
|
yp->tx_ring[entry].result_status = 0;
|
|
if (entry >= TX_RING_SIZE-1) {
|
|
/* New stop command. */
|
|
yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
|
|
cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
|
|
} else {
|
|
yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->tx_ring[entry].dbdma_cmd =
|
|
cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
|
|
}
|
|
yp->cur_tx++;
|
|
#else
|
|
yp->tx_ring[entry<<1].request_cnt = len;
|
|
yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
|
|
skb->data, len, PCI_DMA_TODEVICE));
|
|
/* The input_last (status-write) command is constant, but we must
|
|
rewrite the subsequent 'stop' command. */
|
|
|
|
yp->cur_tx++;
|
|
{
|
|
unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
|
|
yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
}
|
|
/* Final step -- overwrite the old 'stop' command. */
|
|
|
|
yp->tx_ring[entry<<1].dbdma_cmd =
|
|
cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
|
|
CMD_TX_PKT | BRANCH_IFTRUE) | len);
|
|
#endif
|
|
|
|
/* Non-x86 Todo: explicitly flush cache lines here. */
|
|
|
|
/* Wake the potentially-idle transmit channel. */
|
|
iowrite32(0x10001000, yp->base + TxCtrl);
|
|
|
|
if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
|
|
netif_start_queue (dev); /* Typical path */
|
|
else
|
|
yp->tx_full = 1;
|
|
|
|
if (yellowfin_debug > 4) {
|
|
netdev_printk(KERN_DEBUG, dev, "Yellowfin transmit frame #%d queued in slot %d\n",
|
|
yp->cur_tx, entry);
|
|
}
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* The interrupt handler does all of the Rx thread work and cleans up
|
|
after the Tx thread. */
|
|
static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = dev_instance;
|
|
struct yellowfin_private *yp;
|
|
void __iomem *ioaddr;
|
|
int boguscnt = max_interrupt_work;
|
|
unsigned int handled = 0;
|
|
|
|
yp = netdev_priv(dev);
|
|
ioaddr = yp->base;
|
|
|
|
spin_lock (&yp->lock);
|
|
|
|
do {
|
|
u16 intr_status = ioread16(ioaddr + IntrClear);
|
|
|
|
if (yellowfin_debug > 4)
|
|
netdev_printk(KERN_DEBUG, dev, "Yellowfin interrupt, status %04x\n",
|
|
intr_status);
|
|
|
|
if (intr_status == 0)
|
|
break;
|
|
handled = 1;
|
|
|
|
if (intr_status & (IntrRxDone | IntrEarlyRx)) {
|
|
yellowfin_rx(dev);
|
|
iowrite32(0x10001000, ioaddr + RxCtrl); /* Wake Rx engine. */
|
|
}
|
|
|
|
#ifdef NO_TXSTATS
|
|
for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
|
|
int entry = yp->dirty_tx % TX_RING_SIZE;
|
|
struct sk_buff *skb;
|
|
|
|
if (yp->tx_ring[entry].result_status == 0)
|
|
break;
|
|
skb = yp->tx_skbuff[entry];
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += skb->len;
|
|
/* Free the original skb. */
|
|
pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(skb);
|
|
yp->tx_skbuff[entry] = NULL;
|
|
}
|
|
if (yp->tx_full &&
|
|
yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
|
|
/* The ring is no longer full, clear tbusy. */
|
|
yp->tx_full = 0;
|
|
netif_wake_queue(dev);
|
|
}
|
|
#else
|
|
if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
|
|
unsigned dirty_tx = yp->dirty_tx;
|
|
|
|
for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
|
|
dirty_tx++) {
|
|
/* Todo: optimize this. */
|
|
int entry = dirty_tx % TX_RING_SIZE;
|
|
u16 tx_errs = yp->tx_status[entry].tx_errs;
|
|
struct sk_buff *skb;
|
|
|
|
#ifndef final_version
|
|
if (yellowfin_debug > 5)
|
|
netdev_printk(KERN_DEBUG, dev, "Tx queue %d check, Tx status %04x %04x %04x %04x\n",
|
|
entry,
|
|
yp->tx_status[entry].tx_cnt,
|
|
yp->tx_status[entry].tx_errs,
|
|
yp->tx_status[entry].total_tx_cnt,
|
|
yp->tx_status[entry].paused);
|
|
#endif
|
|
if (tx_errs == 0)
|
|
break; /* It still hasn't been Txed */
|
|
skb = yp->tx_skbuff[entry];
|
|
if (tx_errs & 0xF810) {
|
|
/* There was an major error, log it. */
|
|
#ifndef final_version
|
|
if (yellowfin_debug > 1)
|
|
netdev_printk(KERN_DEBUG, dev, "Transmit error, Tx status %04x\n",
|
|
tx_errs);
|
|
#endif
|
|
dev->stats.tx_errors++;
|
|
if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
|
|
if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++;
|
|
if (tx_errs & 0x2000) dev->stats.tx_window_errors++;
|
|
if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++;
|
|
} else {
|
|
#ifndef final_version
|
|
if (yellowfin_debug > 4)
|
|
netdev_printk(KERN_DEBUG, dev, "Normal transmit, Tx status %04x\n",
|
|
tx_errs);
|
|
#endif
|
|
dev->stats.tx_bytes += skb->len;
|
|
dev->stats.collisions += tx_errs & 15;
|
|
dev->stats.tx_packets++;
|
|
}
|
|
/* Free the original skb. */
|
|
pci_unmap_single(yp->pci_dev,
|
|
yp->tx_ring[entry<<1].addr, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq(skb);
|
|
yp->tx_skbuff[entry] = 0;
|
|
/* Mark status as empty. */
|
|
yp->tx_status[entry].tx_errs = 0;
|
|
}
|
|
|
|
#ifndef final_version
|
|
if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
|
|
netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d\n",
|
|
dirty_tx, yp->cur_tx, yp->tx_full);
|
|
dirty_tx += TX_RING_SIZE;
|
|
}
|
|
#endif
|
|
|
|
if (yp->tx_full &&
|
|
yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
|
|
/* The ring is no longer full, clear tbusy. */
|
|
yp->tx_full = 0;
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
yp->dirty_tx = dirty_tx;
|
|
yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
|
|
}
|
|
#endif
|
|
|
|
/* Log errors and other uncommon events. */
|
|
if (intr_status & 0x2ee) /* Abnormal error summary. */
|
|
yellowfin_error(dev, intr_status);
|
|
|
|
if (--boguscnt < 0) {
|
|
netdev_warn(dev, "Too much work at interrupt, status=%#04x\n",
|
|
intr_status);
|
|
break;
|
|
}
|
|
} while (1);
|
|
|
|
if (yellowfin_debug > 3)
|
|
netdev_printk(KERN_DEBUG, dev, "exiting interrupt, status=%#04x\n",
|
|
ioread16(ioaddr + IntrStatus));
|
|
|
|
spin_unlock (&yp->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* This routine is logically part of the interrupt handler, but separated
|
|
for clarity and better register allocation. */
|
|
static int yellowfin_rx(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
int entry = yp->cur_rx % RX_RING_SIZE;
|
|
int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
|
|
|
|
if (yellowfin_debug > 4) {
|
|
printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n",
|
|
entry, yp->rx_ring[entry].result_status);
|
|
printk(KERN_DEBUG " #%d desc. %08x %08x %08x\n",
|
|
entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
|
|
yp->rx_ring[entry].result_status);
|
|
}
|
|
|
|
/* If EOP is set on the next entry, it's a new packet. Send it up. */
|
|
while (1) {
|
|
struct yellowfin_desc *desc = &yp->rx_ring[entry];
|
|
struct sk_buff *rx_skb = yp->rx_skbuff[entry];
|
|
s16 frame_status;
|
|
u16 desc_status;
|
|
int data_size;
|
|
u8 *buf_addr;
|
|
|
|
if(!desc->result_status)
|
|
break;
|
|
pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
|
|
yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
|
|
desc_status = le32_to_cpu(desc->result_status) >> 16;
|
|
buf_addr = rx_skb->data;
|
|
data_size = (le32_to_cpu(desc->dbdma_cmd) -
|
|
le32_to_cpu(desc->result_status)) & 0xffff;
|
|
frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
|
|
if (yellowfin_debug > 4)
|
|
printk(KERN_DEBUG " %s() status was %04x\n",
|
|
__func__, frame_status);
|
|
if (--boguscnt < 0)
|
|
break;
|
|
if ( ! (desc_status & RX_EOP)) {
|
|
if (data_size != 0)
|
|
netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %04x, data_size %d!\n",
|
|
desc_status, data_size);
|
|
dev->stats.rx_length_errors++;
|
|
} else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) {
|
|
/* There was a error. */
|
|
if (yellowfin_debug > 3)
|
|
printk(KERN_DEBUG " %s() Rx error was %04x\n",
|
|
__func__, frame_status);
|
|
dev->stats.rx_errors++;
|
|
if (frame_status & 0x0060) dev->stats.rx_length_errors++;
|
|
if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
|
|
if (frame_status & 0x0010) dev->stats.rx_crc_errors++;
|
|
if (frame_status < 0) dev->stats.rx_dropped++;
|
|
} else if ( !(yp->drv_flags & IsGigabit) &&
|
|
((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
|
|
u8 status1 = buf_addr[data_size-2];
|
|
u8 status2 = buf_addr[data_size-1];
|
|
dev->stats.rx_errors++;
|
|
if (status1 & 0xC0) dev->stats.rx_length_errors++;
|
|
if (status2 & 0x03) dev->stats.rx_frame_errors++;
|
|
if (status2 & 0x04) dev->stats.rx_crc_errors++;
|
|
if (status2 & 0x80) dev->stats.rx_dropped++;
|
|
#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
|
|
} else if ((yp->flags & HasMACAddrBug) &&
|
|
memcmp(le32_to_cpu(yp->rx_ring_dma +
|
|
entry*sizeof(struct yellowfin_desc)),
|
|
dev->dev_addr, 6) != 0 &&
|
|
memcmp(le32_to_cpu(yp->rx_ring_dma +
|
|
entry*sizeof(struct yellowfin_desc)),
|
|
"\377\377\377\377\377\377", 6) != 0) {
|
|
if (bogus_rx++ == 0)
|
|
netdev_warn(dev, "Bad frame to %pM\n",
|
|
buf_addr);
|
|
#endif
|
|
} else {
|
|
struct sk_buff *skb;
|
|
int pkt_len = data_size -
|
|
(yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
|
|
/* To verify: Yellowfin Length should omit the CRC! */
|
|
|
|
#ifndef final_version
|
|
if (yellowfin_debug > 4)
|
|
printk(KERN_DEBUG " %s() normal Rx pkt length %d of %d, bogus_cnt %d\n",
|
|
__func__, pkt_len, data_size, boguscnt);
|
|
#endif
|
|
/* Check if the packet is long enough to just pass up the skbuff
|
|
without copying to a properly sized skbuff. */
|
|
if (pkt_len > rx_copybreak) {
|
|
skb_put(skb = rx_skb, pkt_len);
|
|
pci_unmap_single(yp->pci_dev,
|
|
le32_to_cpu(yp->rx_ring[entry].addr),
|
|
yp->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
yp->rx_skbuff[entry] = NULL;
|
|
} else {
|
|
skb = dev_alloc_skb(pkt_len + 2);
|
|
if (skb == NULL)
|
|
break;
|
|
skb_reserve(skb, 2); /* 16 byte align the IP header */
|
|
skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
|
|
skb_put(skb, pkt_len);
|
|
pci_dma_sync_single_for_device(yp->pci_dev,
|
|
le32_to_cpu(desc->addr),
|
|
yp->rx_buf_sz,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pkt_len;
|
|
}
|
|
entry = (++yp->cur_rx) % RX_RING_SIZE;
|
|
}
|
|
|
|
/* Refill the Rx ring buffers. */
|
|
for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
|
|
entry = yp->dirty_rx % RX_RING_SIZE;
|
|
if (yp->rx_skbuff[entry] == NULL) {
|
|
struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
|
|
if (skb == NULL)
|
|
break; /* Better luck next round. */
|
|
yp->rx_skbuff[entry] = skb;
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
|
|
yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
|
|
skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
|
|
}
|
|
yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->rx_ring[entry].result_status = 0; /* Clear complete bit. */
|
|
if (entry != 0)
|
|
yp->rx_ring[entry - 1].dbdma_cmd =
|
|
cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
|
|
else
|
|
yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
|
|
cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
|
|
| yp->rx_buf_sz);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void yellowfin_error(struct net_device *dev, int intr_status)
|
|
{
|
|
netdev_err(dev, "Something Wicked happened! %04x\n", intr_status);
|
|
/* Hmmmmm, it's not clear what to do here. */
|
|
if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
|
|
dev->stats.tx_errors++;
|
|
if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
|
|
dev->stats.rx_errors++;
|
|
}
|
|
|
|
static int yellowfin_close(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
void __iomem *ioaddr = yp->base;
|
|
int i;
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
if (yellowfin_debug > 1) {
|
|
netdev_printk(KERN_DEBUG, dev, "Shutting down ethercard, status was Tx %04x Rx %04x Int %02x\n",
|
|
ioread16(ioaddr + TxStatus),
|
|
ioread16(ioaddr + RxStatus),
|
|
ioread16(ioaddr + IntrStatus));
|
|
netdev_printk(KERN_DEBUG, dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n",
|
|
yp->cur_tx, yp->dirty_tx,
|
|
yp->cur_rx, yp->dirty_rx);
|
|
}
|
|
|
|
/* Disable interrupts by clearing the interrupt mask. */
|
|
iowrite16(0x0000, ioaddr + IntrEnb);
|
|
|
|
/* Stop the chip's Tx and Rx processes. */
|
|
iowrite32(0x80000000, ioaddr + RxCtrl);
|
|
iowrite32(0x80000000, ioaddr + TxCtrl);
|
|
|
|
del_timer(&yp->timer);
|
|
|
|
#if defined(__i386__)
|
|
if (yellowfin_debug > 2) {
|
|
printk(KERN_DEBUG " Tx ring at %08llx:\n",
|
|
(unsigned long long)yp->tx_ring_dma);
|
|
for (i = 0; i < TX_RING_SIZE*2; i++)
|
|
printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n",
|
|
ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
|
|
i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
|
|
yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
|
|
printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
|
|
for (i = 0; i < TX_RING_SIZE; i++)
|
|
printk(KERN_DEBUG " #%d status %04x %04x %04x %04x\n",
|
|
i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
|
|
yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
|
|
|
|
printk(KERN_DEBUG " Rx ring %08llx:\n",
|
|
(unsigned long long)yp->rx_ring_dma);
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n",
|
|
ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
|
|
i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
|
|
yp->rx_ring[i].result_status);
|
|
if (yellowfin_debug > 6) {
|
|
if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
|
|
int j;
|
|
|
|
printk(KERN_DEBUG);
|
|
for (j = 0; j < 0x50; j++)
|
|
pr_cont(" %04x",
|
|
get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
|
|
pr_cont("\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif /* __i386__ debugging only */
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Free all the skbuffs in the Rx queue. */
|
|
for (i = 0; i < RX_RING_SIZE; i++) {
|
|
yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
|
|
yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
|
|
if (yp->rx_skbuff[i]) {
|
|
dev_kfree_skb(yp->rx_skbuff[i]);
|
|
}
|
|
yp->rx_skbuff[i] = NULL;
|
|
}
|
|
for (i = 0; i < TX_RING_SIZE; i++) {
|
|
if (yp->tx_skbuff[i])
|
|
dev_kfree_skb(yp->tx_skbuff[i]);
|
|
yp->tx_skbuff[i] = NULL;
|
|
}
|
|
|
|
#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
|
|
if (yellowfin_debug > 0) {
|
|
netdev_printk(KERN_DEBUG, dev, "Received %d frames that we should not have\n",
|
|
bogus_rx);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor. */
|
|
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct yellowfin_private *yp = netdev_priv(dev);
|
|
void __iomem *ioaddr = yp->base;
|
|
u16 cfg_value = ioread16(ioaddr + Cnfg);
|
|
|
|
/* Stop the Rx process to change any value. */
|
|
iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
|
|
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
|
|
iowrite16(0x000F, ioaddr + AddrMode);
|
|
} else if ((netdev_mc_count(dev) > 64) ||
|
|
(dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to filter well, or accept all multicasts. */
|
|
iowrite16(0x000B, ioaddr + AddrMode);
|
|
} else if (!netdev_mc_empty(dev)) { /* Must use the multicast hash table. */
|
|
struct dev_mc_list *mclist;
|
|
u16 hash_table[4];
|
|
int i;
|
|
|
|
memset(hash_table, 0, sizeof(hash_table));
|
|
netdev_for_each_mc_addr(mclist, dev) {
|
|
unsigned int bit;
|
|
|
|
/* Due to a bug in the early chip versions, multiple filter
|
|
slots must be set for each address. */
|
|
if (yp->drv_flags & HasMulticastBug) {
|
|
bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f;
|
|
hash_table[bit >> 4] |= (1 << bit);
|
|
bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f;
|
|
hash_table[bit >> 4] |= (1 << bit);
|
|
bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f;
|
|
hash_table[bit >> 4] |= (1 << bit);
|
|
}
|
|
bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f;
|
|
hash_table[bit >> 4] |= (1 << bit);
|
|
}
|
|
/* Copy the hash table to the chip. */
|
|
for (i = 0; i < 4; i++)
|
|
iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
|
|
iowrite16(0x0003, ioaddr + AddrMode);
|
|
} else { /* Normal, unicast/broadcast-only mode. */
|
|
iowrite16(0x0001, ioaddr + AddrMode);
|
|
}
|
|
/* Restart the Rx process. */
|
|
iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
|
|
}
|
|
|
|
static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct yellowfin_private *np = netdev_priv(dev);
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->bus_info, pci_name(np->pci_dev));
|
|
}
|
|
|
|
static const struct ethtool_ops ethtool_ops = {
|
|
.get_drvinfo = yellowfin_get_drvinfo
|
|
};
|
|
|
|
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct yellowfin_private *np = netdev_priv(dev);
|
|
void __iomem *ioaddr = np->base;
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
|
|
data->phy_id = np->phys[0] & 0x1f;
|
|
/* Fall Through */
|
|
|
|
case SIOCGMIIREG: /* Read MII PHY register. */
|
|
data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
|
|
return 0;
|
|
|
|
case SIOCSMIIREG: /* Write MII PHY register. */
|
|
if (data->phy_id == np->phys[0]) {
|
|
u16 value = data->val_in;
|
|
switch (data->reg_num) {
|
|
case 0:
|
|
/* Check for autonegotiation on or reset. */
|
|
np->medialock = (value & 0x9000) ? 0 : 1;
|
|
if (np->medialock)
|
|
np->full_duplex = (value & 0x0100) ? 1 : 0;
|
|
break;
|
|
case 4: np->advertising = value; break;
|
|
}
|
|
/* Perhaps check_duplex(dev), depending on chip semantics. */
|
|
}
|
|
mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
|
|
static void __devexit yellowfin_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct yellowfin_private *np;
|
|
|
|
BUG_ON(!dev);
|
|
np = netdev_priv(dev);
|
|
|
|
pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
|
|
np->tx_status_dma);
|
|
pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
|
|
pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
|
|
unregister_netdev (dev);
|
|
|
|
pci_iounmap(pdev, np->base);
|
|
|
|
pci_release_regions (pdev);
|
|
|
|
free_netdev (dev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
|
|
static struct pci_driver yellowfin_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = yellowfin_pci_tbl,
|
|
.probe = yellowfin_init_one,
|
|
.remove = __devexit_p(yellowfin_remove_one),
|
|
};
|
|
|
|
|
|
static int __init yellowfin_init (void)
|
|
{
|
|
/* when a module, this is printed whether or not devices are found in probe */
|
|
#ifdef MODULE
|
|
printk(version);
|
|
#endif
|
|
return pci_register_driver(&yellowfin_driver);
|
|
}
|
|
|
|
|
|
static void __exit yellowfin_cleanup (void)
|
|
{
|
|
pci_unregister_driver (&yellowfin_driver);
|
|
}
|
|
|
|
|
|
module_init(yellowfin_init);
|
|
module_exit(yellowfin_cleanup);
|