892 lines
23 KiB
C
892 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for MT9M001 CMOS Image Sensor from Micron
|
|
*
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
/*
|
|
* mt9m001 i2c address 0x5d
|
|
*/
|
|
|
|
/* mt9m001 selected register addresses */
|
|
#define MT9M001_CHIP_VERSION 0x00
|
|
#define MT9M001_ROW_START 0x01
|
|
#define MT9M001_COLUMN_START 0x02
|
|
#define MT9M001_WINDOW_HEIGHT 0x03
|
|
#define MT9M001_WINDOW_WIDTH 0x04
|
|
#define MT9M001_HORIZONTAL_BLANKING 0x05
|
|
#define MT9M001_VERTICAL_BLANKING 0x06
|
|
#define MT9M001_OUTPUT_CONTROL 0x07
|
|
#define MT9M001_SHUTTER_WIDTH 0x09
|
|
#define MT9M001_FRAME_RESTART 0x0b
|
|
#define MT9M001_SHUTTER_DELAY 0x0c
|
|
#define MT9M001_RESET 0x0d
|
|
#define MT9M001_READ_OPTIONS1 0x1e
|
|
#define MT9M001_READ_OPTIONS2 0x20
|
|
#define MT9M001_GLOBAL_GAIN 0x35
|
|
#define MT9M001_CHIP_ENABLE 0xF1
|
|
|
|
#define MT9M001_MAX_WIDTH 1280
|
|
#define MT9M001_MAX_HEIGHT 1024
|
|
#define MT9M001_MIN_WIDTH 48
|
|
#define MT9M001_MIN_HEIGHT 32
|
|
#define MT9M001_COLUMN_SKIP 20
|
|
#define MT9M001_ROW_SKIP 12
|
|
#define MT9M001_DEFAULT_HBLANK 9
|
|
#define MT9M001_DEFAULT_VBLANK 25
|
|
|
|
/* MT9M001 has only one fixed colorspace per pixelcode */
|
|
struct mt9m001_datafmt {
|
|
u32 code;
|
|
enum v4l2_colorspace colorspace;
|
|
};
|
|
|
|
/* Find a data format by a pixel code in an array */
|
|
static const struct mt9m001_datafmt *mt9m001_find_datafmt(
|
|
u32 code, const struct mt9m001_datafmt *fmt,
|
|
int n)
|
|
{
|
|
int i;
|
|
for (i = 0; i < n; i++)
|
|
if (fmt[i].code == code)
|
|
return fmt + i;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static const struct mt9m001_datafmt mt9m001_colour_fmts[] = {
|
|
/*
|
|
* Order important: first natively supported,
|
|
* second supported with a GPIO extender
|
|
*/
|
|
{MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
|
|
{MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
|
|
};
|
|
|
|
static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = {
|
|
/* Order important - see above */
|
|
{MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG},
|
|
{MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
|
|
};
|
|
|
|
struct mt9m001 {
|
|
struct v4l2_subdev subdev;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct {
|
|
/* exposure/auto-exposure cluster */
|
|
struct v4l2_ctrl *autoexposure;
|
|
struct v4l2_ctrl *exposure;
|
|
};
|
|
bool streaming;
|
|
struct mutex mutex;
|
|
struct v4l2_rect rect; /* Sensor window */
|
|
struct clk *clk;
|
|
struct gpio_desc *standby_gpio;
|
|
struct gpio_desc *reset_gpio;
|
|
const struct mt9m001_datafmt *fmt;
|
|
const struct mt9m001_datafmt *fmts;
|
|
int num_fmts;
|
|
unsigned int total_h;
|
|
unsigned short y_skip_top; /* Lines to skip at the top */
|
|
struct media_pad pad;
|
|
};
|
|
|
|
static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
|
|
{
|
|
return container_of(i2c_get_clientdata(client), struct mt9m001, subdev);
|
|
}
|
|
|
|
static int reg_read(struct i2c_client *client, const u8 reg)
|
|
{
|
|
return i2c_smbus_read_word_swapped(client, reg);
|
|
}
|
|
|
|
static int reg_write(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
return i2c_smbus_write_word_swapped(client, reg, data);
|
|
}
|
|
|
|
static int reg_set(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_read(client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return reg_write(client, reg, ret | data);
|
|
}
|
|
|
|
static int reg_clear(struct i2c_client *client, const u8 reg,
|
|
const u16 data)
|
|
{
|
|
int ret;
|
|
|
|
ret = reg_read(client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return reg_write(client, reg, ret & ~data);
|
|
}
|
|
|
|
struct mt9m001_reg {
|
|
u8 reg;
|
|
u16 data;
|
|
};
|
|
|
|
static int multi_reg_write(struct i2c_client *client,
|
|
const struct mt9m001_reg *regs, int num)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
int ret = reg_write(client, regs[i].reg, regs[i].data);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_init(struct i2c_client *client)
|
|
{
|
|
static const struct mt9m001_reg init_regs[] = {
|
|
/*
|
|
* Issue a soft reset. This returns all registers to their
|
|
* default values.
|
|
*/
|
|
{ MT9M001_RESET, 1 },
|
|
{ MT9M001_RESET, 0 },
|
|
/* Disable chip, synchronous option update */
|
|
{ MT9M001_OUTPUT_CONTROL, 0 }
|
|
};
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
return multi_reg_write(client, init_regs, ARRAY_SIZE(init_regs));
|
|
}
|
|
|
|
static int mt9m001_apply_selection(struct v4l2_subdev *sd)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
const struct mt9m001_reg regs[] = {
|
|
/* Blanking and start values - default... */
|
|
{ MT9M001_HORIZONTAL_BLANKING, MT9M001_DEFAULT_HBLANK },
|
|
{ MT9M001_VERTICAL_BLANKING, MT9M001_DEFAULT_VBLANK },
|
|
/*
|
|
* The caller provides a supported format, as verified per
|
|
* call to .set_fmt(FORMAT_TRY).
|
|
*/
|
|
{ MT9M001_COLUMN_START, mt9m001->rect.left },
|
|
{ MT9M001_ROW_START, mt9m001->rect.top },
|
|
{ MT9M001_WINDOW_WIDTH, mt9m001->rect.width - 1 },
|
|
{ MT9M001_WINDOW_HEIGHT,
|
|
mt9m001->rect.height + mt9m001->y_skip_top - 1 },
|
|
};
|
|
|
|
return multi_reg_write(client, regs, ARRAY_SIZE(regs));
|
|
}
|
|
|
|
static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&mt9m001->mutex);
|
|
|
|
if (mt9m001->streaming == enable)
|
|
goto done;
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
ret = mt9m001_apply_selection(sd);
|
|
if (ret)
|
|
goto put_unlock;
|
|
|
|
ret = __v4l2_ctrl_handler_setup(&mt9m001->hdl);
|
|
if (ret)
|
|
goto put_unlock;
|
|
|
|
/* Switch to master "normal" mode */
|
|
ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 2);
|
|
if (ret < 0)
|
|
goto put_unlock;
|
|
} else {
|
|
/* Switch to master stop sensor readout */
|
|
reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
mt9m001->streaming = enable;
|
|
done:
|
|
mutex_unlock(&mt9m001->mutex);
|
|
|
|
return 0;
|
|
|
|
put_unlock:
|
|
pm_runtime_put(&client->dev);
|
|
unlock:
|
|
mutex_unlock(&mt9m001->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt9m001_set_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
struct v4l2_rect rect = sel->r;
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
|
|
sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
if (mt9m001->fmts == mt9m001_colour_fmts)
|
|
/*
|
|
* Bayer format - even number of rows for simplicity,
|
|
* but let the user play with the top row.
|
|
*/
|
|
rect.height = ALIGN(rect.height, 2);
|
|
|
|
/* Datasheet requirement: see register description */
|
|
rect.width = ALIGN(rect.width, 2);
|
|
rect.left = ALIGN(rect.left, 2);
|
|
|
|
rect.width = clamp_t(u32, rect.width, MT9M001_MIN_WIDTH,
|
|
MT9M001_MAX_WIDTH);
|
|
rect.left = clamp_t(u32, rect.left, MT9M001_COLUMN_SKIP,
|
|
MT9M001_COLUMN_SKIP + MT9M001_MAX_WIDTH - rect.width);
|
|
|
|
rect.height = clamp_t(u32, rect.height, MT9M001_MIN_HEIGHT,
|
|
MT9M001_MAX_HEIGHT);
|
|
rect.top = clamp_t(u32, rect.top, MT9M001_ROW_SKIP,
|
|
MT9M001_ROW_SKIP + MT9M001_MAX_HEIGHT - rect.height);
|
|
|
|
mt9m001->total_h = rect.height + mt9m001->y_skip_top +
|
|
MT9M001_DEFAULT_VBLANK;
|
|
|
|
mt9m001->rect = rect;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
|
|
if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
sel->r.left = MT9M001_COLUMN_SKIP;
|
|
sel->r.top = MT9M001_ROW_SKIP;
|
|
sel->r.width = MT9M001_MAX_WIDTH;
|
|
sel->r.height = MT9M001_MAX_HEIGHT;
|
|
return 0;
|
|
case V4L2_SEL_TGT_CROP:
|
|
sel->r = mt9m001->rect;
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mt9m001_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
mf = v4l2_subdev_get_try_format(sd, sd_state, 0);
|
|
format->format = *mf;
|
|
return 0;
|
|
}
|
|
|
|
mf->width = mt9m001->rect.width;
|
|
mf->height = mt9m001->rect.height;
|
|
mf->code = mt9m001->fmt->code;
|
|
mf->colorspace = mt9m001->fmt->colorspace;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
|
|
mf->quantization = V4L2_QUANTIZATION_DEFAULT;
|
|
mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_s_fmt(struct v4l2_subdev *sd,
|
|
const struct mt9m001_datafmt *fmt,
|
|
struct v4l2_mbus_framefmt *mf)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
struct v4l2_subdev_selection sel = {
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.target = V4L2_SEL_TGT_CROP,
|
|
.r.left = mt9m001->rect.left,
|
|
.r.top = mt9m001->rect.top,
|
|
.r.width = mf->width,
|
|
.r.height = mf->height,
|
|
};
|
|
int ret;
|
|
|
|
/* No support for scaling so far, just crop. TODO: use skipping */
|
|
ret = mt9m001_set_selection(sd, NULL, &sel);
|
|
if (!ret) {
|
|
mf->width = mt9m001->rect.width;
|
|
mf->height = mt9m001->rect.height;
|
|
mt9m001->fmt = fmt;
|
|
mf->colorspace = fmt->colorspace;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt9m001_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
const struct mt9m001_datafmt *fmt;
|
|
|
|
if (format->pad)
|
|
return -EINVAL;
|
|
|
|
v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH,
|
|
MT9M001_MAX_WIDTH, 1,
|
|
&mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top,
|
|
MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0);
|
|
|
|
if (mt9m001->fmts == mt9m001_colour_fmts)
|
|
mf->height = ALIGN(mf->height - 1, 2);
|
|
|
|
fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts,
|
|
mt9m001->num_fmts);
|
|
if (!fmt) {
|
|
fmt = mt9m001->fmt;
|
|
mf->code = fmt->code;
|
|
}
|
|
|
|
mf->colorspace = fmt->colorspace;
|
|
mf->field = V4L2_FIELD_NONE;
|
|
mf->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
|
|
mf->quantization = V4L2_QUANTIZATION_DEFAULT;
|
|
mf->xfer_func = V4L2_XFER_FUNC_DEFAULT;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
|
|
return mt9m001_s_fmt(sd, fmt, mf);
|
|
sd_state->pads->try_fmt = *mf;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int mt9m001_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
reg->size = 2;
|
|
reg->val = reg_read(client, reg->reg);
|
|
|
|
if (reg->val > 0xffff)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (reg->reg > 0xff)
|
|
return -EINVAL;
|
|
|
|
if (reg_write(client, reg->reg, reg->val) < 0)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mt9m001_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(mt9m001->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mt9m001->standby_gpio) {
|
|
gpiod_set_value_cansleep(mt9m001->standby_gpio, 0);
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
if (mt9m001->reset_gpio) {
|
|
gpiod_set_value_cansleep(mt9m001->reset_gpio, 1);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value_cansleep(mt9m001->reset_gpio, 0);
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
|
|
gpiod_set_value_cansleep(mt9m001->standby_gpio, 1);
|
|
clk_disable_unprepare(mt9m001->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct mt9m001 *mt9m001 = container_of(ctrl->handler,
|
|
struct mt9m001, hdl);
|
|
s32 min, max;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
min = mt9m001->exposure->minimum;
|
|
max = mt9m001->exposure->maximum;
|
|
mt9m001->exposure->val =
|
|
(524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct mt9m001 *mt9m001 = container_of(ctrl->handler,
|
|
struct mt9m001, hdl);
|
|
struct v4l2_subdev *sd = &mt9m001->subdev;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct v4l2_ctrl *exp = mt9m001->exposure;
|
|
int data;
|
|
int ret;
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VFLIP:
|
|
if (ctrl->val)
|
|
ret = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
|
|
else
|
|
ret = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
|
|
break;
|
|
|
|
case V4L2_CID_GAIN:
|
|
/* See Datasheet Table 7, Gain settings. */
|
|
if (ctrl->val <= ctrl->default_value) {
|
|
/* Pack it into 0..1 step 0.125, register values 0..8 */
|
|
unsigned long range = ctrl->default_value - ctrl->minimum;
|
|
data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range;
|
|
|
|
dev_dbg(&client->dev, "Setting gain %d\n", data);
|
|
ret = reg_write(client, MT9M001_GLOBAL_GAIN, data);
|
|
} else {
|
|
/* Pack it into 1.125..15 variable step, register values 9..67 */
|
|
/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
|
|
unsigned long range = ctrl->maximum - ctrl->default_value - 1;
|
|
unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) *
|
|
111 + range / 2) / range + 9;
|
|
|
|
if (gain <= 32)
|
|
data = gain;
|
|
else if (gain <= 64)
|
|
data = ((gain - 32) * 16 + 16) / 32 + 80;
|
|
else
|
|
data = ((gain - 64) * 7 + 28) / 56 + 96;
|
|
|
|
dev_dbg(&client->dev, "Setting gain from %d to %d\n",
|
|
reg_read(client, MT9M001_GLOBAL_GAIN), data);
|
|
ret = reg_write(client, MT9M001_GLOBAL_GAIN, data);
|
|
}
|
|
break;
|
|
|
|
case V4L2_CID_EXPOSURE_AUTO:
|
|
if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
|
|
unsigned long range = exp->maximum - exp->minimum;
|
|
unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 +
|
|
range / 2) / range + 1;
|
|
|
|
dev_dbg(&client->dev,
|
|
"Setting shutter width from %d to %lu\n",
|
|
reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
|
|
ret = reg_write(client, MT9M001_SHUTTER_WIDTH, shutter);
|
|
} else {
|
|
mt9m001->total_h = mt9m001->rect.height +
|
|
mt9m001->y_skip_top + MT9M001_DEFAULT_VBLANK;
|
|
ret = reg_write(client, MT9M001_SHUTTER_WIDTH,
|
|
mt9m001->total_h);
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Interface active, can use i2c. If it fails, it can indeed mean, that
|
|
* this wasn't our capture interface, so, we wait for the right one
|
|
*/
|
|
static int mt9m001_video_probe(struct i2c_client *client)
|
|
{
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
s32 data;
|
|
int ret;
|
|
|
|
/* Enable the chip */
|
|
data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
|
|
dev_dbg(&client->dev, "write: %d\n", data);
|
|
|
|
/* Read out the chip version register */
|
|
data = reg_read(client, MT9M001_CHIP_VERSION);
|
|
|
|
/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
|
|
switch (data) {
|
|
case 0x8411:
|
|
case 0x8421:
|
|
mt9m001->fmts = mt9m001_colour_fmts;
|
|
mt9m001->num_fmts = ARRAY_SIZE(mt9m001_colour_fmts);
|
|
break;
|
|
case 0x8431:
|
|
mt9m001->fmts = mt9m001_monochrome_fmts;
|
|
mt9m001->num_fmts = ARRAY_SIZE(mt9m001_monochrome_fmts);
|
|
break;
|
|
default:
|
|
dev_err(&client->dev,
|
|
"No MT9M001 chip detected, register read %x\n", data);
|
|
ret = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
mt9m001->fmt = &mt9m001->fmts[0];
|
|
|
|
dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
|
|
data == 0x8431 ? "C12STM" : "C12ST");
|
|
|
|
ret = mt9m001_init(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Failed to initialise the camera\n");
|
|
goto done;
|
|
}
|
|
|
|
/* mt9m001_init() has reset the chip, returning registers to defaults */
|
|
ret = v4l2_ctrl_handler_setup(&mt9m001->hdl);
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
|
|
*lines = mt9m001->y_skip_top;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
|
|
.g_volatile_ctrl = mt9m001_g_volatile_ctrl,
|
|
.s_ctrl = mt9m001_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
|
|
.log_status = v4l2_ctrl_subdev_log_status,
|
|
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = mt9m001_g_register,
|
|
.s_register = mt9m001_s_register,
|
|
#endif
|
|
};
|
|
|
|
static int mt9m001_init_cfg(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, sd_state, 0);
|
|
|
|
try_fmt->width = MT9M001_MAX_WIDTH;
|
|
try_fmt->height = MT9M001_MAX_HEIGHT;
|
|
try_fmt->code = mt9m001->fmts[0].code;
|
|
try_fmt->colorspace = mt9m001->fmts[0].colorspace;
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
try_fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
|
|
try_fmt->quantization = V4L2_QUANTIZATION_DEFAULT;
|
|
try_fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
|
|
if (code->pad || code->index >= mt9m001->num_fmts)
|
|
return -EINVAL;
|
|
|
|
code->code = mt9m001->fmts[code->index].code;
|
|
return 0;
|
|
}
|
|
|
|
static int mt9m001_get_mbus_config(struct v4l2_subdev *sd,
|
|
unsigned int pad,
|
|
struct v4l2_mbus_config *cfg)
|
|
{
|
|
/* MT9M001 has all capture_format parameters fixed */
|
|
cfg->type = V4L2_MBUS_PARALLEL;
|
|
cfg->bus.parallel.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
|
|
V4L2_MBUS_HSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH |
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH |
|
|
V4L2_MBUS_MASTER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
|
|
.s_stream = mt9m001_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
|
|
.g_skip_top_lines = mt9m001_g_skip_top_lines,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = {
|
|
.init_cfg = mt9m001_init_cfg,
|
|
.enum_mbus_code = mt9m001_enum_mbus_code,
|
|
.get_selection = mt9m001_get_selection,
|
|
.set_selection = mt9m001_set_selection,
|
|
.get_fmt = mt9m001_get_fmt,
|
|
.set_fmt = mt9m001_set_fmt,
|
|
.get_mbus_config = mt9m001_get_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops mt9m001_subdev_ops = {
|
|
.core = &mt9m001_subdev_core_ops,
|
|
.video = &mt9m001_subdev_video_ops,
|
|
.sensor = &mt9m001_subdev_sensor_ops,
|
|
.pad = &mt9m001_subdev_pad_ops,
|
|
};
|
|
|
|
static int mt9m001_probe(struct i2c_client *client)
|
|
{
|
|
struct mt9m001 *mt9m001;
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
|
|
dev_warn(&adapter->dev,
|
|
"I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
|
|
return -EIO;
|
|
}
|
|
|
|
mt9m001 = devm_kzalloc(&client->dev, sizeof(*mt9m001), GFP_KERNEL);
|
|
if (!mt9m001)
|
|
return -ENOMEM;
|
|
|
|
mt9m001->clk = devm_clk_get(&client->dev, NULL);
|
|
if (IS_ERR(mt9m001->clk))
|
|
return PTR_ERR(mt9m001->clk);
|
|
|
|
mt9m001->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(mt9m001->standby_gpio))
|
|
return PTR_ERR(mt9m001->standby_gpio);
|
|
|
|
mt9m001->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(mt9m001->reset_gpio))
|
|
return PTR_ERR(mt9m001->reset_gpio);
|
|
|
|
v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
|
|
mt9m001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
|
|
V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
|
|
v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
|
|
V4L2_CID_GAIN, 0, 127, 1, 64);
|
|
mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, 1, 255, 1, 255);
|
|
/*
|
|
* Simulated autoexposure. If enabled, we calculate shutter width
|
|
* ourselves in the driver based on vertical blanking and frame width
|
|
*/
|
|
mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
|
|
&mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
|
|
V4L2_EXPOSURE_AUTO);
|
|
mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
|
|
if (mt9m001->hdl.error)
|
|
return mt9m001->hdl.error;
|
|
|
|
v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
|
|
V4L2_EXPOSURE_MANUAL, true);
|
|
|
|
mutex_init(&mt9m001->mutex);
|
|
mt9m001->hdl.lock = &mt9m001->mutex;
|
|
|
|
/* Second stage probe - when a capture adapter is there */
|
|
mt9m001->y_skip_top = 0;
|
|
mt9m001->rect.left = MT9M001_COLUMN_SKIP;
|
|
mt9m001->rect.top = MT9M001_ROW_SKIP;
|
|
mt9m001->rect.width = MT9M001_MAX_WIDTH;
|
|
mt9m001->rect.height = MT9M001_MAX_HEIGHT;
|
|
|
|
ret = mt9m001_power_on(&client->dev);
|
|
if (ret)
|
|
goto error_hdl_free;
|
|
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
ret = mt9m001_video_probe(client);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
mt9m001->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
mt9m001->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ret = media_entity_pads_init(&mt9m001->subdev.entity, 1, &mt9m001->pad);
|
|
if (ret)
|
|
goto error_power_off;
|
|
|
|
ret = v4l2_async_register_subdev(&mt9m001->subdev);
|
|
if (ret)
|
|
goto error_entity_cleanup;
|
|
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
return 0;
|
|
|
|
error_entity_cleanup:
|
|
media_entity_cleanup(&mt9m001->subdev.entity);
|
|
error_power_off:
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
mt9m001_power_off(&client->dev);
|
|
|
|
error_hdl_free:
|
|
v4l2_ctrl_handler_free(&mt9m001->hdl);
|
|
mutex_destroy(&mt9m001->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mt9m001_remove(struct i2c_client *client)
|
|
{
|
|
struct mt9m001 *mt9m001 = to_mt9m001(client);
|
|
|
|
/*
|
|
* As it increments RPM usage_count even on errors, we don't need to
|
|
* check the returned code here.
|
|
*/
|
|
pm_runtime_get_sync(&client->dev);
|
|
|
|
v4l2_async_unregister_subdev(&mt9m001->subdev);
|
|
media_entity_cleanup(&mt9m001->subdev.entity);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
mt9m001_power_off(&client->dev);
|
|
|
|
v4l2_ctrl_handler_free(&mt9m001->hdl);
|
|
mutex_destroy(&mt9m001->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id mt9m001_id[] = {
|
|
{ "mt9m001", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mt9m001_id);
|
|
|
|
static const struct dev_pm_ops mt9m001_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(mt9m001_power_off, mt9m001_power_on, NULL)
|
|
};
|
|
|
|
static const struct of_device_id mt9m001_of_match[] = {
|
|
{ .compatible = "onnn,mt9m001", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mt9m001_of_match);
|
|
|
|
static struct i2c_driver mt9m001_i2c_driver = {
|
|
.driver = {
|
|
.name = "mt9m001",
|
|
.pm = &mt9m001_pm_ops,
|
|
.of_match_table = mt9m001_of_match,
|
|
},
|
|
.probe_new = mt9m001_probe,
|
|
.remove = mt9m001_remove,
|
|
.id_table = mt9m001_id,
|
|
};
|
|
|
|
module_i2c_driver(mt9m001_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Micron MT9M001 Camera driver");
|
|
MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|