381 lines
9.1 KiB
C
381 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2019 Baylibre, SAS.
|
|
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mdio-mux.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define ETH_PLL_STS 0x40
|
|
#define ETH_PLL_CTL0 0x44
|
|
#define PLL_CTL0_LOCK_DIG BIT(30)
|
|
#define PLL_CTL0_RST BIT(29)
|
|
#define PLL_CTL0_EN BIT(28)
|
|
#define PLL_CTL0_SEL BIT(23)
|
|
#define PLL_CTL0_N GENMASK(14, 10)
|
|
#define PLL_CTL0_M GENMASK(8, 0)
|
|
#define PLL_LOCK_TIMEOUT 1000000
|
|
#define PLL_MUX_NUM_PARENT 2
|
|
#define ETH_PLL_CTL1 0x48
|
|
#define ETH_PLL_CTL2 0x4c
|
|
#define ETH_PLL_CTL3 0x50
|
|
#define ETH_PLL_CTL4 0x54
|
|
#define ETH_PLL_CTL5 0x58
|
|
#define ETH_PLL_CTL6 0x5c
|
|
#define ETH_PLL_CTL7 0x60
|
|
|
|
#define ETH_PHY_CNTL0 0x80
|
|
#define EPHY_G12A_ID 0x33010180
|
|
#define ETH_PHY_CNTL1 0x84
|
|
#define PHY_CNTL1_ST_MODE GENMASK(2, 0)
|
|
#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
|
|
#define EPHY_DFLT_ADD 8
|
|
#define PHY_CNTL1_MII_MODE GENMASK(15, 14)
|
|
#define EPHY_MODE_RMII 0x1
|
|
#define PHY_CNTL1_CLK_EN BIT(16)
|
|
#define PHY_CNTL1_CLKFREQ BIT(17)
|
|
#define PHY_CNTL1_PHY_ENB BIT(18)
|
|
#define ETH_PHY_CNTL2 0x88
|
|
#define PHY_CNTL2_USE_INTERNAL BIT(5)
|
|
#define PHY_CNTL2_SMI_SRC_MAC BIT(6)
|
|
#define PHY_CNTL2_RX_CLK_EPHY BIT(9)
|
|
|
|
#define MESON_G12A_MDIO_EXTERNAL_ID 0
|
|
#define MESON_G12A_MDIO_INTERNAL_ID 1
|
|
|
|
struct g12a_mdio_mux {
|
|
bool pll_is_enabled;
|
|
void __iomem *regs;
|
|
void *mux_handle;
|
|
struct clk *pclk;
|
|
struct clk *pll;
|
|
};
|
|
|
|
struct g12a_ephy_pll {
|
|
void __iomem *base;
|
|
struct clk_hw hw;
|
|
};
|
|
|
|
#define g12a_ephy_pll_to_dev(_hw) \
|
|
container_of(_hw, struct g12a_ephy_pll, hw)
|
|
|
|
static unsigned long g12a_ephy_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
|
u32 val, m, n;
|
|
|
|
val = readl(pll->base + ETH_PLL_CTL0);
|
|
m = FIELD_GET(PLL_CTL0_M, val);
|
|
n = FIELD_GET(PLL_CTL0_N, val);
|
|
|
|
return parent_rate * m / n;
|
|
}
|
|
|
|
static int g12a_ephy_pll_enable(struct clk_hw *hw)
|
|
{
|
|
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
|
u32 val = readl(pll->base + ETH_PLL_CTL0);
|
|
|
|
/* Apply both enable an reset */
|
|
val |= PLL_CTL0_RST | PLL_CTL0_EN;
|
|
writel(val, pll->base + ETH_PLL_CTL0);
|
|
|
|
/* Clear the reset to let PLL lock */
|
|
val &= ~PLL_CTL0_RST;
|
|
writel(val, pll->base + ETH_PLL_CTL0);
|
|
|
|
/* Poll on the digital lock instead of the usual analog lock
|
|
* This is done because bit 31 is unreliable on some SoC. Bit
|
|
* 31 may indicate that the PLL is not lock eventhough the clock
|
|
* is actually running
|
|
*/
|
|
return readl_poll_timeout(pll->base + ETH_PLL_CTL0, val,
|
|
val & PLL_CTL0_LOCK_DIG, 0, PLL_LOCK_TIMEOUT);
|
|
}
|
|
|
|
static void g12a_ephy_pll_disable(struct clk_hw *hw)
|
|
{
|
|
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
|
u32 val;
|
|
|
|
val = readl(pll->base + ETH_PLL_CTL0);
|
|
val &= ~PLL_CTL0_EN;
|
|
val |= PLL_CTL0_RST;
|
|
writel(val, pll->base + ETH_PLL_CTL0);
|
|
}
|
|
|
|
static int g12a_ephy_pll_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
|
unsigned int val;
|
|
|
|
val = readl(pll->base + ETH_PLL_CTL0);
|
|
|
|
return (val & PLL_CTL0_LOCK_DIG) ? 1 : 0;
|
|
}
|
|
|
|
static void g12a_ephy_pll_init(struct clk_hw *hw)
|
|
{
|
|
struct g12a_ephy_pll *pll = g12a_ephy_pll_to_dev(hw);
|
|
|
|
/* Apply PLL HW settings */
|
|
writel(0x29c0040a, pll->base + ETH_PLL_CTL0);
|
|
writel(0x927e0000, pll->base + ETH_PLL_CTL1);
|
|
writel(0xac5f49e5, pll->base + ETH_PLL_CTL2);
|
|
writel(0x00000000, pll->base + ETH_PLL_CTL3);
|
|
writel(0x00000000, pll->base + ETH_PLL_CTL4);
|
|
writel(0x20200000, pll->base + ETH_PLL_CTL5);
|
|
writel(0x0000c002, pll->base + ETH_PLL_CTL6);
|
|
writel(0x00000023, pll->base + ETH_PLL_CTL7);
|
|
}
|
|
|
|
static const struct clk_ops g12a_ephy_pll_ops = {
|
|
.recalc_rate = g12a_ephy_pll_recalc_rate,
|
|
.is_enabled = g12a_ephy_pll_is_enabled,
|
|
.enable = g12a_ephy_pll_enable,
|
|
.disable = g12a_ephy_pll_disable,
|
|
.init = g12a_ephy_pll_init,
|
|
};
|
|
|
|
static int g12a_enable_internal_mdio(struct g12a_mdio_mux *priv)
|
|
{
|
|
int ret;
|
|
|
|
/* Enable the phy clock */
|
|
if (!priv->pll_is_enabled) {
|
|
ret = clk_prepare_enable(priv->pll);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
priv->pll_is_enabled = true;
|
|
|
|
/* Initialize ephy control */
|
|
writel(EPHY_G12A_ID, priv->regs + ETH_PHY_CNTL0);
|
|
writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
|
|
FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
|
|
FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
|
|
PHY_CNTL1_CLK_EN |
|
|
PHY_CNTL1_CLKFREQ |
|
|
PHY_CNTL1_PHY_ENB,
|
|
priv->regs + ETH_PHY_CNTL1);
|
|
writel(PHY_CNTL2_USE_INTERNAL |
|
|
PHY_CNTL2_SMI_SRC_MAC |
|
|
PHY_CNTL2_RX_CLK_EPHY,
|
|
priv->regs + ETH_PHY_CNTL2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int g12a_enable_external_mdio(struct g12a_mdio_mux *priv)
|
|
{
|
|
/* Reset the mdio bus mux */
|
|
writel_relaxed(0x0, priv->regs + ETH_PHY_CNTL2);
|
|
|
|
/* Disable the phy clock if enabled */
|
|
if (priv->pll_is_enabled) {
|
|
clk_disable_unprepare(priv->pll);
|
|
priv->pll_is_enabled = false;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int g12a_mdio_switch_fn(int current_child, int desired_child,
|
|
void *data)
|
|
{
|
|
struct g12a_mdio_mux *priv = dev_get_drvdata(data);
|
|
|
|
if (current_child == desired_child)
|
|
return 0;
|
|
|
|
switch (desired_child) {
|
|
case MESON_G12A_MDIO_EXTERNAL_ID:
|
|
return g12a_enable_external_mdio(priv);
|
|
case MESON_G12A_MDIO_INTERNAL_ID:
|
|
return g12a_enable_internal_mdio(priv);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct of_device_id g12a_mdio_mux_match[] = {
|
|
{ .compatible = "amlogic,g12a-mdio-mux", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, g12a_mdio_mux_match);
|
|
|
|
static int g12a_ephy_glue_clk_register(struct device *dev)
|
|
{
|
|
struct g12a_mdio_mux *priv = dev_get_drvdata(dev);
|
|
const char *parent_names[PLL_MUX_NUM_PARENT];
|
|
struct clk_init_data init;
|
|
struct g12a_ephy_pll *pll;
|
|
struct clk_mux *mux;
|
|
struct clk *clk;
|
|
char *name;
|
|
int i;
|
|
|
|
/* get the mux parents */
|
|
for (i = 0; i < PLL_MUX_NUM_PARENT; i++) {
|
|
char in_name[8];
|
|
|
|
snprintf(in_name, sizeof(in_name), "clkin%d", i);
|
|
clk = devm_clk_get(dev, in_name);
|
|
if (IS_ERR(clk)) {
|
|
if (PTR_ERR(clk) != -EPROBE_DEFER)
|
|
dev_err(dev, "Missing clock %s\n", in_name);
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
parent_names[i] = __clk_get_name(clk);
|
|
}
|
|
|
|
/* create the input mux */
|
|
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
|
|
if (!mux)
|
|
return -ENOMEM;
|
|
|
|
name = kasprintf(GFP_KERNEL, "%s#mux", dev_name(dev));
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
init.name = name;
|
|
init.ops = &clk_mux_ro_ops;
|
|
init.flags = 0;
|
|
init.parent_names = parent_names;
|
|
init.num_parents = PLL_MUX_NUM_PARENT;
|
|
|
|
mux->reg = priv->regs + ETH_PLL_CTL0;
|
|
mux->shift = __ffs(PLL_CTL0_SEL);
|
|
mux->mask = PLL_CTL0_SEL >> mux->shift;
|
|
mux->hw.init = &init;
|
|
|
|
clk = devm_clk_register(dev, &mux->hw);
|
|
kfree(name);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to register input mux\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
/* create the pll */
|
|
pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
|
|
if (!pll)
|
|
return -ENOMEM;
|
|
|
|
name = kasprintf(GFP_KERNEL, "%s#pll", dev_name(dev));
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
init.name = name;
|
|
init.ops = &g12a_ephy_pll_ops;
|
|
init.flags = 0;
|
|
parent_names[0] = __clk_get_name(clk);
|
|
init.parent_names = parent_names;
|
|
init.num_parents = 1;
|
|
|
|
pll->base = priv->regs;
|
|
pll->hw.init = &init;
|
|
|
|
clk = devm_clk_register(dev, &pll->hw);
|
|
kfree(name);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to register input mux\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
priv->pll = clk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int g12a_mdio_mux_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct g12a_mdio_mux *priv;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->regs))
|
|
return PTR_ERR(priv->regs);
|
|
|
|
priv->pclk = devm_clk_get(dev, "pclk");
|
|
if (IS_ERR(priv->pclk)) {
|
|
ret = PTR_ERR(priv->pclk);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get peripheral clock\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Make sure the device registers are clocked */
|
|
ret = clk_prepare_enable(priv->pclk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable peripheral clock");
|
|
return ret;
|
|
}
|
|
|
|
/* Register PLL in CCF */
|
|
ret = g12a_ephy_glue_clk_register(dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = mdio_mux_init(dev, dev->of_node, g12a_mdio_switch_fn,
|
|
&priv->mux_handle, dev, NULL);
|
|
if (ret) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "mdio multiplexer init failed: %d", ret);
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
clk_disable_unprepare(priv->pclk);
|
|
return ret;
|
|
}
|
|
|
|
static int g12a_mdio_mux_remove(struct platform_device *pdev)
|
|
{
|
|
struct g12a_mdio_mux *priv = platform_get_drvdata(pdev);
|
|
|
|
mdio_mux_uninit(priv->mux_handle);
|
|
|
|
if (priv->pll_is_enabled)
|
|
clk_disable_unprepare(priv->pll);
|
|
|
|
clk_disable_unprepare(priv->pclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver g12a_mdio_mux_driver = {
|
|
.probe = g12a_mdio_mux_probe,
|
|
.remove = g12a_mdio_mux_remove,
|
|
.driver = {
|
|
.name = "g12a-mdio_mux",
|
|
.of_match_table = g12a_mdio_mux_match,
|
|
},
|
|
};
|
|
module_platform_driver(g12a_mdio_mux_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic G12a MDIO multiplexer driver");
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_LICENSE("GPL v2");
|