.. |
Kconfig
|
ath9k_common: make sure DEBUG_FS and RELAY enabled
|
2014-11-19 15:50:04 -05:00 |
Makefile
|
ath9k: move spectral.* to common-spectral.*
|
2014-11-11 16:31:14 -05:00 |
ahb.c
|
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
|
2014-12-06 07:37:11 -08:00 |
ani.c
|
ath9k_hw: do not lower ANI setting below default on AR913x
|
2014-04-30 11:39:54 -04:00 |
ani.h
|
ath9k_hw: tweak noise immunity thresholds for older chipsets
|
2014-03-03 15:35:55 -05:00 |
antenna.c
|
ath9k: add support for reporting per-chain signal strength
|
2013-12-18 15:23:19 -05:00 |
ar953x_initvals.h
|
ath9k: Update QCA953x initvals
|
2014-11-17 15:32:15 -05:00 |
ar955x_1p0_initvals.h
|
ath9k: Update AR955x initvals
|
2014-10-27 14:16:17 -04:00 |
ar5008_initvals.h
|
…
|
|
ar5008_phy.c
|
ath9k: set pulse_rssi threshold to 15
|
2014-10-30 15:24:49 -04:00 |
ar9001_initvals.h
|
…
|
|
ar9002_calib.c
|
ath9k_hw: start initial NF calibration after PA calibration on <AR9003
|
2014-10-27 14:16:18 -04:00 |
ar9002_hw.c
|
ath9k: Register supported HW hang checks
|
2014-01-03 15:36:57 -05:00 |
ar9002_initvals.h
|
…
|
|
ar9002_mac.c
|
ath9k: add TPC capability to TX descriptor path
|
2014-11-25 14:09:56 -05:00 |
ar9002_phy.c
|
ath9k: For AR9271 chipsets, set count = 0 for endless samples.
|
2014-11-11 16:31:14 -05:00 |
ar9002_phy.h
|
ath9k: Program HW for WB195 diversity
|
2013-08-05 14:52:43 -04:00 |
ar9003_2p2_initvals.h
|
ath9k_hw: update ar9300 initvals
|
2014-04-30 12:13:15 -04:00 |
ar9003_buffalo_initvals.h
|
ath9k: Use a separate TX gain table for WZR-HP-G450H
|
2013-12-09 15:37:58 -05:00 |
ar9003_calib.c
|
ath9k: restart hardware after noise floor calibration failure
|
2014-10-27 14:16:18 -04:00 |
ar9003_eeprom.c
|
ath9k: add TX power per-rate tables
|
2014-11-25 14:09:56 -05:00 |
ar9003_eeprom.h
|
ath9k: Update BaseExtension_1 eeprom structure
|
2013-12-18 15:23:44 -05:00 |
ar9003_hw.c
|
ath9k: Use new QCA953x initvals
|
2014-11-17 15:32:15 -05:00 |
ar9003_mac.c
|
ath9k: add TPC capability to TX descriptor path
|
2014-11-25 14:09:56 -05:00 |
ar9003_mac.h
|
…
|
|
ar9003_mci.c
|
ath9k: Use bitops for calibration flags
|
2013-09-26 15:13:47 -04:00 |
ar9003_mci.h
|
…
|
|
ar9003_paprd.c
|
…
|
|
ar9003_phy.c
|
ath9k: add TX power per-rate tables
|
2014-11-25 14:09:56 -05:00 |
ar9003_phy.h
|
ath9k: Fix regulatory compliance
|
2014-01-03 15:37:01 -05:00 |
ar9003_rtt.c
|
ath9k: Fix PeakDetect calibration for AR9462
|
2013-09-26 15:13:47 -04:00 |
ar9003_rtt.h
|
ath9k_hw: make support for PC-OEM cards optional
|
2014-10-27 14:16:18 -04:00 |
ar9003_wow.c
|
ath9k: Fix wow.c compilation
|
2013-12-02 14:24:53 -05:00 |
ar9330_1p1_initvals.h
|
ath9k_hw: update ar9300 initvals
|
2014-04-30 12:13:15 -04:00 |
ar9330_1p2_initvals.h
|
ath9k_hw: update ar9300 initvals
|
2014-04-30 12:13:15 -04:00 |
ar9340_initvals.h
|
ath9k_hw: fix worse EVM for 11b rates
|
2014-04-30 12:13:16 -04:00 |
ar9462_2p0_initvals.h
|
ath9k: Fix ETSI compliance for AR9462 2.0
|
2014-02-20 15:53:20 -05:00 |
ar9462_2p1_initvals.h
|
ath9k: Remove duplicate initvals for AR9462 v2.1
|
2013-12-02 14:25:02 -05:00 |
ar9485_initvals.h
|
ath9k: Identify duplicate AR9485 initvals
|
2013-12-09 15:37:59 -05:00 |
ar9565_1p0_initvals.h
|
ath9k: Identify duplicate AR9565 v1.0 initvals
|
2013-12-09 15:38:00 -05:00 |
ar9565_1p1_initvals.h
|
ath9k: Add initvals for AR9565 1.1
|
2013-12-02 14:25:01 -05:00 |
ar9580_1p0_initvals.h
|
ath9k: Update AR9580 initvals
|
2014-10-27 14:16:17 -04:00 |
ath9k.h
|
ath9k: add TPC capability to TX descriptor path
|
2014-11-25 14:09:56 -05:00 |
beacon.c
|
ath9k: add TPC capability to TX descriptor path
|
2014-11-25 14:09:56 -05:00 |
btcoex.c
|
ath9k_hw: clean up generic timer code
|
2013-12-18 15:23:22 -05:00 |
btcoex.h
|
…
|
|
calib.c
|
ath9k: restart hardware after noise floor calibration failure
|
2014-10-27 14:16:18 -04:00 |
calib.h
|
ath9k: restart hardware after noise floor calibration failure
|
2014-10-27 14:16:18 -04:00 |
channel.c
|
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR
|
2014-11-19 18:46:09 +01:00 |
common-beacon.c
|
Revert "ath9k: Calculate sleep duration"
|
2014-09-11 14:17:20 -04:00 |
common-beacon.h
|
ath9k: move ath9k_beacon_config_ap common
|
2014-03-17 13:13:08 -04:00 |
common-debug.c
|
ath9k: move phy_err to ath9k_cmn_debug_phy_err
|
2014-05-13 15:56:42 -04:00 |
common-debug.h
|
ath9k: move phy_err to ath9k_cmn_debug_phy_err
|
2014-05-13 15:56:42 -04:00 |
common-init.c
|
ath9k: move ath9k_reload_chainmask_settings to common
|
2014-02-28 14:33:16 -05:00 |
common-init.h
|
ath9k: move ath9k_reload_chainmask_settings to common
|
2014-02-28 14:33:16 -05:00 |
common-spectral.c
|
ath9k: move spectral.* to common-spectral.*
|
2014-11-11 16:31:14 -05:00 |
common-spectral.h
|
ath9k: common-spectral: don't depend from ATH9K_DEBUGFS
|
2014-11-17 15:32:14 -05:00 |
common.c
|
Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
|
2014-11-19 15:38:48 -05:00 |
common.h
|
ath9k: move spectral.* to common-spectral.*
|
2014-11-11 16:31:14 -05:00 |
debug.c
|
ath9k: add debugfs support for hw TPC
|
2014-12-24 19:14:27 +02:00 |
debug.h
|
Driver core patches for 3.19-rc1
|
2014-12-14 16:10:09 -08:00 |
debug_sta.c
|
ath9k: remove tid->paused flag
|
2014-04-30 11:42:35 -04:00 |
dfs.c
|
ath9k: simplify DFS pulse interval debug printing
|
2014-05-29 13:08:10 -04:00 |
dfs.h
|
ath9k/ath: move dfs pattern detector to ath
|
2013-10-18 14:03:54 -04:00 |
dfs_debug.c
|
ath9k: dfs_debug fix possible NULL dereference
|
2013-11-11 14:42:43 -05:00 |
dfs_debug.h
|
ath9k: simplify DFS pulse interval debug printing
|
2014-05-29 13:08:10 -04:00 |
dynack.c
|
ath9k: fix getting tx duration for dynack
|
2014-09-30 13:17:48 -04:00 |
dynack.h
|
ath9k: add dynamic ACK timeout estimation
|
2014-09-16 16:18:30 -04:00 |
eeprom.c
|
…
|
|
eeprom.h
|
…
|
|
eeprom_4k.c
|
ath9k_hw: simplify spur channel handling
|
2013-12-18 15:23:27 -05:00 |
eeprom_9287.c
|
ath9k_hw: simplify spur channel handling
|
2013-12-18 15:23:27 -05:00 |
eeprom_def.c
|
ath9k: add support for endian swap of eeprom from platform data
|
2014-10-27 14:16:19 -04:00 |
gpio.c
|
ath9k: Fix LED configuration
|
2014-11-17 15:32:16 -05:00 |
hif_usb.c
|
ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P
|
2014-02-12 15:36:04 -05:00 |
hif_usb.h
|
…
|
|
htc.h
|
ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debug
|
2014-11-11 17:12:17 -05:00 |
htc_drv_beacon.c
|
ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init
|
2014-03-17 13:13:09 -04:00 |
htc_drv_debug.c
|
ath9k_htc: add spectral scan debug interface
|
2014-11-11 16:31:15 -05:00 |
htc_drv_gpio.c
|
ath9k_htc: reconfigure led_gpios after resume
|
2013-12-18 15:23:02 -05:00 |
htc_drv_init.c
|
ath9k_htc: ath9k_htc_op_ps_wakeup() can be static
|
2014-11-17 15:32:14 -05:00 |
htc_drv_main.c
|
mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR
|
2014-11-19 18:46:09 +01:00 |
htc_drv_txrx.c
|
ath9k_htc: process rx spectral packets
|
2014-11-11 16:31:15 -05:00 |
htc_hst.c
|
ath9k_htc: catch fw panic pattern
|
2014-02-12 15:36:03 -05:00 |
htc_hst.h
|
ath9k_htc: catch fw panic pattern
|
2014-02-12 15:36:03 -05:00 |
hw-ops.h
|
ath9k: restart hardware after noise floor calibration failure
|
2014-10-27 14:16:18 -04:00 |
hw.c
|
ath9k: enable TPC by default
|
2014-12-24 19:13:55 +02:00 |
hw.h
|
ath9k: fix BE/BK queue order
|
2014-12-01 15:57:21 -05:00 |
init.c
|
ath9k: prevent early IRQs from accessing hardware
|
2014-12-01 15:57:22 -05:00 |
link.c
|
ath9k: restart hardware after noise floor calibration failure
|
2014-10-27 14:16:18 -04:00 |
mac.c
|
ath9k_hw: fix hardware queue allocation
|
2014-12-01 15:57:21 -05:00 |
mac.h
|
ath9k: add TPC capability to TX descriptor path
|
2014-11-25 14:09:56 -05:00 |
main.c
|
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
|
2014-12-08 13:58:58 -05:00 |
mci.c
|
ath9k: Move caldata into channel context
|
2014-06-19 15:49:18 -04:00 |
mci.h
|
…
|
|
pci.c
|
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
|
2014-12-06 07:37:11 -08:00 |
phy.h
|
ath9k: Fix diversity combining for AR9285
|
2013-07-24 11:02:39 -04:00 |
recv.c
|
ath9k: move spectral.* to common-spectral.*
|
2014-11-11 16:31:14 -05:00 |
reg.h
|
ath9k: add TX power per-rate tables
|
2014-11-25 14:09:56 -05:00 |
tx99.c
|
ath9k: Unify reset API
|
2014-10-27 14:16:14 -04:00 |
wmi.c
|
…
|
|
wmi.h
|
ath9k: mark wmi_event_swba as __packed
|
2013-09-26 15:13:48 -04:00 |
wow.c
|
ath9k: Fix interface accounting
|
2014-09-09 15:27:21 -04:00 |
xmit.c
|
ath9k: fix typo
|
2014-12-24 19:14:44 +02:00 |