OpenCloudOS-Kernel/include/linux/mtd
Linus Torvalds d335371940 MTD core changes:
* Call of_platform_populate() for MTD partitions
 * Check devicetree alias for index
 * mtdoops:
   - Add a timestamp to the mtdoops header.
   - Create a header structure for the saved mtdoops.
   - Fix the size of the header read buffer.
 * mtdblock: Warn if opened on NAND
 * Bindings:
   - reserved-memory: Support MTD/block device
   - jedec,spi-nor: remove unneeded properties
   - Extend fixed-partitions binding
   - Add Sercomm (Suzhou) Corporation vendor prefix
 
 MTD driver changes:
 * st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
 * phram:
   - Allow cached mappings
   - Allow probing via reserved-memory
 * maps: ixp4xx: Drop driver
 * bcm47xxpart: Print correct offset on read error
 
 CFI driver changes:
 * Rename chip_ready variables
 * Add S29GL064N ID definition
 * Use chip_ready() for write on S29GL064N
 * Move and rename chip_check/chip_ready/chip_good_for_write
 
 NAND core changes:
 * Print offset instead of page number for bad blocks
 
 Raw NAND controller drivers:
 * Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
 * CS553X: simplify the return expression of cs553x_write_ctrl_byte()
 * Davinci: Remove redundant unsigned comparison to zero
 * Denali: Use managed device resources
 * GPMI:
   - Add large oob bch setting support
   - Rename the variable ecc_chunk_size
   - Uninline the gpmi_check_ecc function
   - Add strict ecc strength check
   - Refactor BCH geometry settings function
 * Intel: Fix possible null-ptr-deref in ebu_nand_probe()
 * MPC5121: Check before clk_disable_unprepare() not needed
 * Mtk:
   - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
   - Also parse the default nand-ecc-engine property if available
   - Make mtk_ecc.c a separated module
 * OMAP ELM:
   - Convert the bindings to yaml
   - Describe the bindings for AM64 ELM
   - Add support for its compatible
 * Renesas: Use runtime PM instead of the raw clock API and update the
            bindings accordingly
 * Rockchip: Check before clk_disable_unprepare() not needed
 * TMIO: Check return value after calling platform_get_resource()
 
 Raw NAND chip driver:
 * Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
 
 SPI-NAND chip drivers:
 * Gigadevice:
   - Add support for:
     - GD5FxGM7xExxG
     - GD5F{2,4}GQ5xExxG
     - GD5F1GQ5RExxG
     - GD5FxGQ4xExxG
   - Fix Quad IO for GD5F1GQ5UExxG
 * XTX: Add support for XT26G0xA
 
 SPI NOR core changes:
 * Read back written SR value to make sure the write was done correctly.
 * Introduce a common function for Read ID that manufacturer drivers can
   use to verify the Octal DTR switch worked correctly.
 * Add helpers for read/write any register commands so manufacturer
   drivers don't open code it every time.
 * Clarify rdsr dummy cycles documentation.
 * Add debugfs entry to expose internal flash parameters and state.
 
 SPI NOR manufacturer drivers changes:
 * Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
 * Move spi_nor_write_ear() to Winbond module since only Winbond flashes
   use it.
 * Rework Micron and Cypress Octal DTR enable methods to improve
   readability.
 * Use the common Read ID function to verify switch to Octal DTR mode for
   Micron and Cypress flashes.
 * Skip polling status on volatile register writes for Micron and Cypress
   flashes since the operation is instant.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmKHhXEACgkQJWrqGEe9
 VoQ4FQgAwTWnv7Eps8ngxlOE1WW1Kx+XUFCYN7mUKmDycgRKWWqF0OUu3pU6T3Si
 XoOixajzsPC7AJtXbbGKUkH3UtqapCZ/OVxMJzY1S1zKVgS72ChvPth+rNOA5H6f
 wkwCRYBCm51hYAlOQeRoFtwLEpOP17KTZw9Jn/u5RVwbQedQnzPj5sb6PddejjF4
 9nlk2auJHzENBEEBG3WLRNgvGep8mNNFarzWB4iWrMcG0w1EgBksbIdshoBmu7vj
 nKcDJbyA81DqX+8d56BfAFih8H2yCXZmhUzMK+zqnNkd1NuPnDDnrQYFKmKm2hAg
 3bIMIzi+8dl/m0TY6BHPHj8oIYpjYA==
 =P95J
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
 "MTD core changes:
   - Call of_platform_populate() for MTD partitions
   - Check devicetree alias for index
   - mtdoops:
      - Add a timestamp to the mtdoops header.
      - Create a header structure for the saved mtdoops.
      - Fix the size of the header read buffer.
   - mtdblock: Warn if opened on NAND
   - Bindings:
      - reserved-memory: Support MTD/block device
      - jedec,spi-nor: remove unneeded properties
      - Extend fixed-partitions binding
      - Add Sercomm (Suzhou) Corporation vendor prefix

  MTD driver changes:
   - st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
   - phram:
      - Allow cached mappings
      - Allow probing via reserved-memory
   - maps: ixp4xx: Drop driver
   - bcm47xxpart: Print correct offset on read error

  CFI driver changes:
   - Rename chip_ready variables
   - Add S29GL064N ID definition
   - Use chip_ready() for write on S29GL064N
   - Move and rename chip_check/chip_ready/chip_good_for_write

  NAND core changes:
   - Print offset instead of page number for bad blocks

  Raw NAND controller drivers:
   - Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
   - CS553X: simplify the return expression of cs553x_write_ctrl_byte()
   - Davinci: Remove redundant unsigned comparison to zero
   - Denali: Use managed device resources
   - GPMI:
      - Add large oob bch setting support
      - Rename the variable ecc_chunk_size
      - Uninline the gpmi_check_ecc function
      - Add strict ecc strength check
      - Refactor BCH geometry settings function
   - Intel: Fix possible null-ptr-deref in ebu_nand_probe()
   - MPC5121: Check before clk_disable_unprepare() not needed
   - Mtk:
      - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
      - Also parse the default nand-ecc-engine property if available
      - Make mtk_ecc.c a separated module
   - OMAP ELM:
      - Convert the bindings to yaml
      - Describe the bindings for AM64 ELM
      - Add support for its compatible
   - Renesas: Use runtime PM instead of the raw clock API and update the
     bindings accordingly
   - Rockchip: Check before clk_disable_unprepare() not needed
   - TMIO: Check return value after calling platform_get_resource()

  Raw NAND chip driver:
   - Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00

  SPI-NAND chip drivers:
   - Gigadevice:
      - Add support for:
         - GD5FxGM7xExxG
         - GD5F{2,4}GQ5xExxG
         - GD5F1GQ5RExxG
         - GD5FxGQ4xExxG
      - Fix Quad IO for GD5F1GQ5UExxG
   - XTX: Add support for XT26G0xA

  SPI NOR core changes:
   - Read back written SR value to make sure the write was done
     correctly.
   - Introduce a common function for Read ID that manufacturer drivers
     can use to verify the Octal DTR switch worked correctly.
   - Add helpers for read/write any register commands so manufacturer
     drivers don't open code it every time.
   - Clarify rdsr dummy cycles documentation.
   - Add debugfs entry to expose internal flash parameters and state.

  SPI NOR manufacturer drivers changes:
   - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
   - Move spi_nor_write_ear() to Winbond module since only Winbond
     flashes use it.
   - Rework Micron and Cypress Octal DTR enable methods to improve
     readability.
   - Use the common Read ID function to verify switch to Octal DTR mode
     for Micron and Cypress flashes.
   - Skip polling status on volatile register writes for Micron and
     Cypress flashes since the operation is instant"

* tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits)
  mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
  dt-bindings: mtd: partitions: Extend fixed-partitions binding
  dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
  mtd: phram: Allow cached mappings
  mtd: call of_platform_populate() for MTD partitions
  mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
  dt-bindings: mtd: renesas: Fix the NAND controller description
  mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
  mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
  mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
  mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
  mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
  mtd: spi-nor: debugfs: fix format specifier
  mtd: spi-nor: support eon en25qh256a variant
  mtd: spi-nor: winbond: add support for W25Q512NW-IM
  mtd: spi-nor: expose internal parameters via debugfs
  mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()
  mtd: spi-nor: move spi_nor_write_ear() to winbond module
  mtd: spi-nor: amend the rdsr dummy cycles documentation
  mtd: cfi_cmdset_0002: Rename chip_ready variables
  ...
2022-05-24 14:31:29 -07:00
..
bbm.h
blktrans.h mtd: Add helper macro for register_mtd_blktrans boilerplate 2021-03-11 09:37:48 +01:00
cfi.h mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N 2022-04-28 10:17:10 +02:00
cfi_endian.h
concat.h
doc2000.h
flashchip.h
ftl.h
gen_probe.h
hyperbus.h
inftl.h
jedec.h
lpc32xx_mlc.h
lpc32xx_slc.h
map.h
mtd.h mtd: fix 'part' field data corruption in mtd_info 2022-04-21 09:29:05 +02:00
mtdram.h
nand-ecc-mtk.h mtd: nand: make mtk_ecc.c a separated module 2022-04-27 18:12:35 +02:00
nand-ecc-mxic.h spi: mxic: Add support for pipelined ECC operations 2022-02-10 09:32:30 +01:00
nand-ecc-sw-bch.h mtd: nand: ecc-bch: Use the public nsteps field 2021-03-11 09:37:28 +01:00
nand-ecc-sw-hamming.h mtd: nand: ecc-hamming: Use the public nsteps field 2021-03-11 09:37:28 +01:00
nand-gpio.h
nand.h spi: mxic: Add support for pipelined ECC operations 2022-02-10 09:32:30 +01:00
ndfc.h
nftl.h
onenand.h
onenand_regs.h
onfi.h mtd: rawnand: Support enabling NV-DDR through SET_FEATURES 2021-05-26 10:51:00 +02:00
partitions.h
pfow.h
physmap.h
pismo.h
plat-ram.h
platnand.h
qinfo.h
rawnand.h mtd: rawnand: protect access to rawnand devices while in suspend 2022-02-09 09:30:21 +01:00
sh_flctl.h
sharpsl.h mtd: nand: ecc-hamming: Remove useless includes 2020-12-10 22:37:30 +01:00
spear_smi.h
spi-nor.h mtd: spi-nor: expose internal parameters via debugfs 2022-05-09 16:55:22 +05:30
spinand.h mtd: spinand: Add support for XTX XT26G0xA 2022-04-21 09:34:12 +02:00
super.h
ubi.h
xip.h