OpenCloudOS-Kernel/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c

373 lines
9.6 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/slab.h>
#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c)
#define SLEEPM BIT(0)
#define OPMODE_MASK GENMASK(4, 3)
#define OPMODE_NORMAL (0x00)
#define OPMODE_NONDRIVING BIT(3)
#define TERMSEL BIT(5)
#define USB2_PHY_USB_PHY_UTMI_CTRL1 (0x40)
#define XCVRSEL BIT(0)
#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50)
#define POR BIT(1)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54)
#define RETENABLEN BIT(3)
#define FSEL_MASK GENMASK(7, 5)
#define FSEL_DEFAULT (0x3 << 4)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58)
#define VBUSVLDEXTSEL0 BIT(4)
#define PLLBTUNE BIT(5)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c)
#define VREGBYPASS BIT(0)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60)
#define VBUSVLDEXT0 BIT(0)
#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64)
#define USB2_AUTO_RESUME BIT(0)
#define USB2_SUSPEND_N BIT(2)
#define USB2_SUSPEND_N_SEL BIT(3)
#define USB2_PHY_USB_PHY_CFG0 (0x94)
#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0)
#define REFCLK_SEL_MASK GENMASK(1, 0)
#define REFCLK_SEL_DEFAULT (0x2 << 0)
static const char * const qcom_snps_hsphy_vreg_names[] = {
"vdda-pll", "vdda33", "vdda18",
};
#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names)
/**
* struct qcom_snps_hsphy - snps hs phy attributes
*
* @phy: generic phy
* @base: iomapped memory space for snps hs phy
*
* @cfg_ahb_clk: AHB2PHY interface clock
* @ref_clk: phy reference clock
* @iface_clk: phy interface clock
* @phy_reset: phy reset control
* @vregs: regulator supplies bulk data
* @phy_initialized: if PHY has been initialized correctly
* @mode: contains the current mode the PHY is in
*/
struct qcom_snps_hsphy {
struct phy *phy;
void __iomem *base;
struct clk *cfg_ahb_clk;
struct clk *ref_clk;
struct reset_control *phy_reset;
struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
bool phy_initialized;
enum phy_mode mode;
};
static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
u32 mask, u32 val)
{
u32 reg;
reg = readl_relaxed(base + offset);
reg &= ~mask;
reg |= val & mask;
writel_relaxed(reg, base + offset);
/* Ensure above write is completed */
readl_relaxed(base + offset);
}
static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
{
dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
if (hsphy->mode == PHY_MODE_USB_HOST) {
/* Enable auto-resume to meet remote wakeup timing */
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL2,
USB2_AUTO_RESUME,
USB2_AUTO_RESUME);
usleep_range(500, 1000);
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL2,
0, USB2_AUTO_RESUME);
}
clk_disable_unprepare(hsphy->cfg_ahb_clk);
return 0;
}
static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
{
int ret;
dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
if (ret) {
dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
return ret;
}
return 0;
}
static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
{
struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
if (!hsphy->phy_initialized)
return 0;
qcom_snps_hsphy_suspend(hsphy);
return 0;
}
static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
{
struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
if (!hsphy->phy_initialized)
return 0;
qcom_snps_hsphy_resume(hsphy);
return 0;
}
static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
int submode)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
hsphy->mode = mode;
return 0;
}
static int qcom_snps_hsphy_init(struct phy *phy)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
int ret;
dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__);
ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
if (ret)
return ret;
ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
if (ret) {
dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
goto poweroff_phy;
}
ret = reset_control_assert(hsphy->phy_reset);
if (ret) {
dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
goto disable_ahb_clk;
}
usleep_range(100, 150);
ret = reset_control_deassert(hsphy->phy_reset);
if (ret) {
dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
goto disable_ahb_clk;
}
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
POR, POR);
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,
FSEL_MASK, 0);
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
PLLBTUNE, PLLBTUNE);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
VBUSVLDEXT0, VBUSVLDEXT0);
qcom_snps_hsphy_write_mask(hsphy->base,
USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
VREGBYPASS, VREGBYPASS);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
SLEEPM, SLEEPM);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,
POR, 0);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
USB2_SUSPEND_N_SEL, 0);
qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
hsphy->phy_initialized = true;
return 0;
disable_ahb_clk:
clk_disable_unprepare(hsphy->cfg_ahb_clk);
poweroff_phy:
regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
return ret;
}
static int qcom_snps_hsphy_exit(struct phy *phy)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
reset_control_assert(hsphy->phy_reset);
clk_disable_unprepare(hsphy->cfg_ahb_clk);
regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
hsphy->phy_initialized = false;
return 0;
}
static const struct phy_ops qcom_snps_hsphy_gen_ops = {
.init = qcom_snps_hsphy_init,
.exit = qcom_snps_hsphy_exit,
.set_mode = qcom_snps_hsphy_set_mode,
.owner = THIS_MODULE,
};
static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
{ .compatible = "qcom,sm8150-usb-hs-phy", },
{ .compatible = "qcom,usb-snps-hs-7nm-phy", },
{ .compatible = "qcom,usb-snps-femto-v2-phy", },
{ }
};
MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
qcom_snps_hsphy_runtime_resume, NULL)
};
static int qcom_snps_hsphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct qcom_snps_hsphy *hsphy;
struct phy_provider *phy_provider;
struct phy *generic_phy;
int ret, i;
int num;
hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL);
if (!hsphy)
return -ENOMEM;
hsphy->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hsphy->base))
return PTR_ERR(hsphy->base);
hsphy->ref_clk = devm_clk_get(dev, "ref");
if (IS_ERR(hsphy->ref_clk)) {
ret = PTR_ERR(hsphy->ref_clk);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get ref clk, %d\n", ret);
return ret;
}
hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(hsphy->phy_reset)) {
dev_err(dev, "failed to get phy core reset\n");
return PTR_ERR(hsphy->phy_reset);
}
num = ARRAY_SIZE(hsphy->vregs);
for (i = 0; i < num; i++)
hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i];
ret = devm_regulator_bulk_get(dev, num, hsphy->vregs);
if (ret) {
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to get regulator supplies: %d\n",
ret);
return ret;
}
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
/*
* Prevent runtime pm from being ON by default. Users can enable
* it using power/control in sysfs.
*/
pm_runtime_forbid(dev);
generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
dev_err(dev, "failed to create phy, %d\n", ret);
return ret;
}
hsphy->phy = generic_phy;
dev_set_drvdata(dev, hsphy);
phy_set_drvdata(generic_phy, hsphy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
else
pm_runtime_disable(dev);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver qcom_snps_hsphy_driver = {
.probe = qcom_snps_hsphy_probe,
.driver = {
.name = "qcom-snps-hs-femto-v2-phy",
.pm = &qcom_snps_hsphy_pm_ops,
.of_match_table = qcom_snps_hsphy_of_match_table,
},
};
module_platform_driver(qcom_snps_hsphy_driver);
MODULE_DESCRIPTION("Qualcomm SNPS FEMTO USB HS PHY V2 driver");
MODULE_LICENSE("GPL v2");