475 lines
13 KiB
C
475 lines
13 KiB
C
/*
|
|
* Copyright (C) 2016 Atmel
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
*
|
|
* Authors: Bo Shen <voice.shen@atmel.com>
|
|
* Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
* Wu, Songjun <Songjun.Wu@atmel.com>
|
|
*
|
|
*
|
|
* Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_edid.h>
|
|
|
|
#define SII902X_TPI_VIDEO_DATA 0x0
|
|
|
|
#define SII902X_TPI_PIXEL_REPETITION 0x8
|
|
#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5)
|
|
#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4)
|
|
#define SII902X_TPI_AVI_PIXEL_REP_4X 3
|
|
#define SII902X_TPI_AVI_PIXEL_REP_2X 1
|
|
#define SII902X_TPI_AVI_PIXEL_REP_NONE 0
|
|
#define SII902X_TPI_CLK_RATIO_HALF (0 << 6)
|
|
#define SII902X_TPI_CLK_RATIO_1X (1 << 6)
|
|
#define SII902X_TPI_CLK_RATIO_2X (2 << 6)
|
|
#define SII902X_TPI_CLK_RATIO_4X (3 << 6)
|
|
|
|
#define SII902X_TPI_AVI_IN_FORMAT 0x9
|
|
#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7)
|
|
#define SII902X_TPI_AVI_INPUT_DITHER BIT(6)
|
|
#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2)
|
|
#define SII902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2)
|
|
#define SII902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2)
|
|
#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0)
|
|
#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0)
|
|
#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0)
|
|
#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0)
|
|
|
|
#define SII902X_TPI_AVI_INFOFRAME 0x0c
|
|
|
|
#define SII902X_SYS_CTRL_DATA 0x1a
|
|
#define SII902X_SYS_CTRL_PWR_DWN BIT(4)
|
|
#define SII902X_SYS_CTRL_AV_MUTE BIT(3)
|
|
#define SII902X_SYS_CTRL_DDC_BUS_REQ BIT(2)
|
|
#define SII902X_SYS_CTRL_DDC_BUS_GRTD BIT(1)
|
|
#define SII902X_SYS_CTRL_OUTPUT_MODE BIT(0)
|
|
#define SII902X_SYS_CTRL_OUTPUT_HDMI 1
|
|
#define SII902X_SYS_CTRL_OUTPUT_DVI 0
|
|
|
|
#define SII902X_REG_CHIPID(n) (0x1b + (n))
|
|
|
|
#define SII902X_PWR_STATE_CTRL 0x1e
|
|
#define SII902X_AVI_POWER_STATE_MSK GENMASK(1, 0)
|
|
#define SII902X_AVI_POWER_STATE_D(l) ((l) & SII902X_AVI_POWER_STATE_MSK)
|
|
|
|
#define SII902X_INT_ENABLE 0x3c
|
|
#define SII902X_INT_STATUS 0x3d
|
|
#define SII902X_HOTPLUG_EVENT BIT(0)
|
|
#define SII902X_PLUGGED_STATUS BIT(2)
|
|
|
|
#define SII902X_REG_TPI_RQB 0xc7
|
|
|
|
#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS 500
|
|
|
|
struct sii902x {
|
|
struct i2c_client *i2c;
|
|
struct regmap *regmap;
|
|
struct drm_bridge bridge;
|
|
struct drm_connector connector;
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
|
|
{
|
|
return container_of(bridge, struct sii902x, bridge);
|
|
}
|
|
|
|
static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
|
|
{
|
|
return container_of(con, struct sii902x, connector);
|
|
}
|
|
|
|
static void sii902x_reset(struct sii902x *sii902x)
|
|
{
|
|
if (!sii902x->reset_gpio)
|
|
return;
|
|
|
|
gpiod_set_value(sii902x->reset_gpio, 1);
|
|
|
|
/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
|
|
usleep_range(150, 200);
|
|
|
|
gpiod_set_value(sii902x->reset_gpio, 0);
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
sii902x_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct sii902x *sii902x = connector_to_sii902x(connector);
|
|
unsigned int status;
|
|
|
|
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
|
|
|
|
return (status & SII902X_PLUGGED_STATUS) ?
|
|
connector_status_connected : connector_status_disconnected;
|
|
}
|
|
|
|
static const struct drm_connector_funcs sii902x_connector_funcs = {
|
|
.detect = sii902x_connector_detect,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int sii902x_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct sii902x *sii902x = connector_to_sii902x(connector);
|
|
struct regmap *regmap = sii902x->regmap;
|
|
u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
|
|
struct device *dev = &sii902x->i2c->dev;
|
|
unsigned long timeout;
|
|
unsigned int retries;
|
|
unsigned int status;
|
|
struct edid *edid;
|
|
int num = 0;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
|
|
SII902X_SYS_CTRL_DDC_BUS_REQ,
|
|
SII902X_SYS_CTRL_DDC_BUS_REQ);
|
|
if (ret)
|
|
return ret;
|
|
|
|
timeout = jiffies +
|
|
msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
|
|
do {
|
|
ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
|
|
if (ret)
|
|
return ret;
|
|
} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
|
|
time_before(jiffies, timeout));
|
|
|
|
if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
|
|
dev_err(dev, "failed to acquire the i2c bus\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status);
|
|
if (ret)
|
|
return ret;
|
|
|
|
edid = drm_get_edid(connector, sii902x->i2c->adapter);
|
|
drm_connector_update_edid_property(connector, edid);
|
|
if (edid) {
|
|
num = drm_add_edid_modes(connector, edid);
|
|
kfree(edid);
|
|
}
|
|
|
|
ret = drm_display_info_set_bus_formats(&connector->display_info,
|
|
&bus_format, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Sometimes the I2C bus can stall after failure to use the
|
|
* EDID channel. Retry a few times to see if things clear
|
|
* up, else continue anyway.
|
|
*/
|
|
retries = 5;
|
|
do {
|
|
ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA,
|
|
&status);
|
|
retries--;
|
|
} while (ret && retries);
|
|
if (ret)
|
|
dev_err(dev, "failed to read status (%d)\n", ret);
|
|
|
|
ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
|
|
SII902X_SYS_CTRL_DDC_BUS_REQ |
|
|
SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
timeout = jiffies +
|
|
msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
|
|
do {
|
|
ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
|
|
if (ret)
|
|
return ret;
|
|
} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
|
|
SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
|
|
time_before(jiffies, timeout));
|
|
|
|
if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
|
|
SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
|
|
dev_err(dev, "failed to release the i2c bus\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
/* TODO: check mode */
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
|
|
.get_modes = sii902x_get_modes,
|
|
.mode_valid = sii902x_mode_valid,
|
|
};
|
|
|
|
static void sii902x_bridge_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct sii902x *sii902x = bridge_to_sii902x(bridge);
|
|
|
|
regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
|
|
SII902X_SYS_CTRL_PWR_DWN,
|
|
SII902X_SYS_CTRL_PWR_DWN);
|
|
}
|
|
|
|
static void sii902x_bridge_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct sii902x *sii902x = bridge_to_sii902x(bridge);
|
|
|
|
regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
|
|
SII902X_AVI_POWER_STATE_MSK,
|
|
SII902X_AVI_POWER_STATE_D(0));
|
|
regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
|
|
SII902X_SYS_CTRL_PWR_DWN, 0);
|
|
}
|
|
|
|
static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adj)
|
|
{
|
|
struct sii902x *sii902x = bridge_to_sii902x(bridge);
|
|
struct regmap *regmap = sii902x->regmap;
|
|
u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
|
|
struct hdmi_avi_infoframe frame;
|
|
int ret;
|
|
|
|
buf[0] = adj->clock;
|
|
buf[1] = adj->clock >> 8;
|
|
buf[2] = adj->vrefresh;
|
|
buf[3] = 0x00;
|
|
buf[4] = adj->hdisplay;
|
|
buf[5] = adj->hdisplay >> 8;
|
|
buf[6] = adj->vdisplay;
|
|
buf[7] = adj->vdisplay >> 8;
|
|
buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
|
|
SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
|
|
buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
|
|
SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
|
|
|
|
ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
|
|
if (ret)
|
|
return;
|
|
|
|
ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj, false);
|
|
if (ret < 0) {
|
|
DRM_ERROR("couldn't fill AVI infoframe\n");
|
|
return;
|
|
}
|
|
|
|
ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
|
|
if (ret < 0) {
|
|
DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
/* Do not send the infoframe header, but keep the CRC field. */
|
|
regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
|
|
buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
|
|
HDMI_AVI_INFOFRAME_SIZE + 1);
|
|
}
|
|
|
|
static int sii902x_bridge_attach(struct drm_bridge *bridge)
|
|
{
|
|
struct sii902x *sii902x = bridge_to_sii902x(bridge);
|
|
struct drm_device *drm = bridge->dev;
|
|
int ret;
|
|
|
|
drm_connector_helper_add(&sii902x->connector,
|
|
&sii902x_connector_helper_funcs);
|
|
|
|
if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
|
|
dev_err(&sii902x->i2c->dev,
|
|
"sii902x driver is only compatible with DRM devices supporting atomic updates\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
ret = drm_connector_init(drm, &sii902x->connector,
|
|
&sii902x_connector_funcs,
|
|
DRM_MODE_CONNECTOR_HDMIA);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (sii902x->i2c->irq > 0)
|
|
sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
|
|
else
|
|
sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
|
|
|
|
drm_connector_attach_encoder(&sii902x->connector, bridge->encoder);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_bridge_funcs sii902x_bridge_funcs = {
|
|
.attach = sii902x_bridge_attach,
|
|
.mode_set = sii902x_bridge_mode_set,
|
|
.disable = sii902x_bridge_disable,
|
|
.enable = sii902x_bridge_enable,
|
|
};
|
|
|
|
static const struct regmap_range sii902x_volatile_ranges[] = {
|
|
{ .range_min = 0, .range_max = 0xff },
|
|
};
|
|
|
|
static const struct regmap_access_table sii902x_volatile_table = {
|
|
.yes_ranges = sii902x_volatile_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
|
|
};
|
|
|
|
static const struct regmap_config sii902x_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.volatile_table = &sii902x_volatile_table,
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static irqreturn_t sii902x_interrupt(int irq, void *data)
|
|
{
|
|
struct sii902x *sii902x = data;
|
|
unsigned int status = 0;
|
|
|
|
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
|
|
regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
|
|
|
|
if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
|
|
drm_helper_hpd_irq_event(sii902x->bridge.dev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sii902x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
unsigned int status = 0;
|
|
struct sii902x *sii902x;
|
|
u8 chipid[4];
|
|
int ret;
|
|
|
|
sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
|
|
if (!sii902x)
|
|
return -ENOMEM;
|
|
|
|
sii902x->i2c = client;
|
|
sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
|
|
if (IS_ERR(sii902x->regmap))
|
|
return PTR_ERR(sii902x->regmap);
|
|
|
|
sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(sii902x->reset_gpio)) {
|
|
dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
|
|
PTR_ERR(sii902x->reset_gpio));
|
|
return PTR_ERR(sii902x->reset_gpio);
|
|
}
|
|
|
|
sii902x_reset(sii902x);
|
|
|
|
ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
|
|
&chipid, 4);
|
|
if (ret) {
|
|
dev_err(dev, "regmap_read failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (chipid[0] != 0xb0) {
|
|
dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
|
|
chipid[0]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Clear all pending interrupts */
|
|
regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
|
|
regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
|
|
|
|
if (client->irq > 0) {
|
|
regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
|
|
SII902X_HOTPLUG_EVENT);
|
|
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
sii902x_interrupt,
|
|
IRQF_ONESHOT, dev_name(dev),
|
|
sii902x);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
sii902x->bridge.funcs = &sii902x_bridge_funcs;
|
|
sii902x->bridge.of_node = dev->of_node;
|
|
drm_bridge_add(&sii902x->bridge);
|
|
|
|
i2c_set_clientdata(client, sii902x);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sii902x_remove(struct i2c_client *client)
|
|
|
|
{
|
|
struct sii902x *sii902x = i2c_get_clientdata(client);
|
|
|
|
drm_bridge_remove(&sii902x->bridge);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sii902x_dt_ids[] = {
|
|
{ .compatible = "sil,sii9022", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
|
|
|
|
static const struct i2c_device_id sii902x_i2c_ids[] = {
|
|
{ "sii9022", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
|
|
|
|
static struct i2c_driver sii902x_driver = {
|
|
.probe = sii902x_probe,
|
|
.remove = sii902x_remove,
|
|
.driver = {
|
|
.name = "sii902x",
|
|
.of_match_table = sii902x_dt_ids,
|
|
},
|
|
.id_table = sii902x_i2c_ids,
|
|
};
|
|
module_i2c_driver(sii902x_driver);
|
|
|
|
MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
|
|
MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
|
|
MODULE_LICENSE("GPL");
|