UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-at91/at91sam9g45_devices.c

1649 lines
42 KiB
C
Raw Blame History

/*
* On-Chip devices setup code for the AT91SAM9G45 family
*
* Copyright (C) 2009 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
#include <linux/atmel-mci.h>
#include <linux/fb.h>
#include <video/atmel_lcdc.h>
#include <mach/board.h>
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at_hdmac.h>
#include <mach/atmel-mci.h>
#include "generic.h"
/* --------------------------------------------------------------------
* HDMAC - AHB DMA Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
static u64 hdmac_dmamask = DMA_BIT_MASK(32);
static struct at_dma_platform_data atdma_pdata = {
.nr_channels = 8,
};
static struct resource hdmac_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DMA,
.end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_DMA,
.end = AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at_hdmac_device = {
.name = "at_hdmac",
.id = -1,
.dev = {
.dma_mask = &hdmac_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &atdma_pdata,
},
.resource = hdmac_resources,
.num_resources = ARRAY_SIZE(hdmac_resources),
};
void __init at91_add_device_hdmac(void)
{
dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
platform_device_register(&at_hdmac_device);
}
#else
void __init at91_add_device_hdmac(void) {}
#endif
/* --------------------------------------------------------------------
* USB Host (OHCI)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_ohci_data;
static struct resource usbh_ohci_resources[] = {
[0] = {
.start = AT91SAM9G45_OHCI_BASE,
.end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_UHPHS,
.end = AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_usbh_ohci_device = {
.name = "at91_ohci",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_ohci_data,
},
.resource = usbh_ohci_resources,
.num_resources = ARRAY_SIZE(usbh_ohci_resources),
};
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
{
int i;
if (!data)
return;
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
if (data->overcurrent_pin[i])
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
usbh_ohci_data = *data;
platform_device_register(&at91_usbh_ohci_device);
}
#else
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB Host HS (EHCI)
* Needs an OHCI host for low and full speed management
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static u64 ehci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_ehci_data;
static struct resource usbh_ehci_resources[] = {
[0] = {
.start = AT91SAM9G45_EHCI_BASE,
.end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_UHPHS,
.end = AT91SAM9G45_ID_UHPHS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_usbh_ehci_device = {
.name = "atmel-ehci",
.id = -1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_ehci_data,
},
.resource = usbh_ehci_resources,
.num_resources = ARRAY_SIZE(usbh_ehci_resources),
};
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
{
int i;
if (!data)
return;
/* Enable VBus control for UHP ports */
for (i = 0; i < data->ports; i++) {
if (gpio_is_valid(data->vbus_pin[i]))
at91_set_gpio_output(data->vbus_pin[i], 0);
}
usbh_ehci_data = *data;
platform_device_register(&at91_usbh_ehci_device);
}
#else
void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
.end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_UDPHS,
.end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = AT91SAM9G45_ID_UDPHS,
.end = AT91SAM9G45_ID_UDPHS,
.flags = IORESOURCE_IRQ,
},
};
#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
[idx] = { \
.name = nam, \
.index = idx, \
.fifo_size = maxpkt, \
.nr_banks = maxbk, \
.can_dma = dma, \
.can_isoc = isoc, \
}
static struct usba_ep_data usba_udc_ep[] __initdata = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 1024, 2, 1, 1),
EP("ep2", 2, 1024, 2, 1, 1),
EP("ep3", 3, 1024, 3, 1, 0),
EP("ep4", 4, 1024, 3, 1, 0),
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
#undef EP
/*
* pdata doesn't have room for any endpoints, so we need to
* append room for the ones we need right after it.
*/
static struct {
struct usba_platform_data pdata;
struct usba_ep_data ep[7];
} usba_udc_data;
static struct platform_device at91_usba_udc_device = {
.name = "atmel_usba_udc",
.id = -1,
.dev = {
.platform_data = &usba_udc_data.pdata,
},
.resource = usba_udc_resources,
.num_resources = ARRAY_SIZE(usba_udc_resources),
};
void __init at91_add_device_usba(struct usba_platform_data *data)
{
usba_udc_data.pdata.vbus_pin = -EINVAL;
usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
if (data && gpio_is_valid(data->vbus_pin)) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
usba_udc_data.pdata.vbus_pin = data->vbus_pin;
}
/* Pullup pin is handled internally by USB device peripheral */
platform_device_register(&at91_usba_udc_device);
}
#else
void __init at91_add_device_usba(struct usba_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_EMAC,
.end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_EMAC,
.end = AT91SAM9G45_ID_EMAC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_eth_device = {
.name = "macb",
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
.num_resources = ARRAY_SIZE(eth_resources),
};
void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
if (gpio_is_valid(data->phy_irq_pin)) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
/* Pins used for MII and RMII */
at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
if (!data->is_rmii) {
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
}
eth_data = *data;
platform_device_register(&at91sam9g45_eth_device);
}
#else
void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct mci_platform_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_MCI0,
.end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_MCI0,
.end = AT91SAM9G45_ID_MCI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_mmc0_device = {
.name = "atmel_mci",
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc0_data,
},
.resource = mmc0_resources,
.num_resources = ARRAY_SIZE(mmc0_resources),
};
static struct resource mmc1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_MCI1,
.end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_MCI1,
.end = AT91SAM9G45_ID_MCI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_mmc1_device = {
.name = "atmel_mci",
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc1_data,
},
.resource = mmc1_resources,
.num_resources = ARRAY_SIZE(mmc1_resources),
};
/* Consider only one slot : slot 0 */
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
{
if (!data)
return;
/* Must have at least one usable slot */
if (!data->slot[0].bus_width)
return;
#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
{
struct at_dma_slave *atslave;
struct mci_dma_data *alt_atslave;
alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
atslave = &alt_atslave->sdata;
/* DMA slave channel configuration */
atslave->dma_dev = &at_hdmac_device.dev;
atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT;
atslave->cfg = ATC_FIFOCFG_HALFFIFO
| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
if (mmc_id == 0) /* MCI0 */
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
| ATC_DST_PER(AT_DMA_ID_MCI0);
else /* MCI1 */
atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
| ATC_DST_PER(AT_DMA_ID_MCI1);
data->dma_slave = alt_atslave;
}
#endif
/* input/irq */
if (gpio_is_valid(data->slot[0].detect_pin)) {
at91_set_gpio_input(data->slot[0].detect_pin, 1);
at91_set_deglitch(data->slot[0].detect_pin, 1);
}
if (gpio_is_valid(data->slot[0].wp_pin))
at91_set_gpio_input(data->slot[0].wp_pin, 1);
if (mmc_id == 0) { /* MCI0 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA0, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA1, 1);
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA2, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA3, 1);
at91_set_A_periph(AT91_PIN_PA4, 1);
at91_set_A_periph(AT91_PIN_PA5, 1);
if (data->slot[0].bus_width == 8) {
at91_set_A_periph(AT91_PIN_PA6, 1);
at91_set_A_periph(AT91_PIN_PA7, 1);
at91_set_A_periph(AT91_PIN_PA8, 1);
at91_set_A_periph(AT91_PIN_PA9, 1);
}
}
mmc0_data = *data;
platform_device_register(&at91sam9g45_mmc0_device);
} else { /* MCI1 */
/* CLK */
at91_set_A_periph(AT91_PIN_PA31, 0);
/* CMD */
at91_set_A_periph(AT91_PIN_PA22, 1);
/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
at91_set_A_periph(AT91_PIN_PA23, 1);
if (data->slot[0].bus_width == 4) {
at91_set_A_periph(AT91_PIN_PA24, 1);
at91_set_A_periph(AT91_PIN_PA25, 1);
at91_set_A_periph(AT91_PIN_PA26, 1);
if (data->slot[0].bus_width == 8) {
at91_set_A_periph(AT91_PIN_PA27, 1);
at91_set_A_periph(AT91_PIN_PA28, 1);
at91_set_A_periph(AT91_PIN_PA29, 1);
at91_set_A_periph(AT91_PIN_PA30, 1);
}
}
mmc1_data = *data;
platform_device_register(&at91sam9g45_mmc1_device);
}
}
#else
void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* NAND / SmartMedia
* -------------------------------------------------------------------- */
#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
static struct atmel_nand_data nand_data;
#define NAND_BASE AT91_CHIPSELECT_3
static struct resource nand_resources[] = {
[0] = {
.start = NAND_BASE,
.end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_BASE_ECC,
.end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_nand_device = {
.name = "atmel_nand",
.id = -1,
.dev = {
.platform_data = &nand_data,
},
.resource = nand_resources,
.num_resources = ARRAY_SIZE(nand_resources),
};
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
at91_set_gpio_output(data->enable_pin, 1);
/* ready/busy pin */
if (gpio_is_valid(data->rdy_pin))
at91_set_gpio_input(data->rdy_pin, 1);
/* card detect pin */
if (gpio_is_valid(data->det_pin))
at91_set_gpio_input(data->det_pin, 1);
nand_data = *data;
platform_device_register(&at91sam9g45_nand_device);
}
#else
void __init at91_add_device_nand(struct atmel_nand_data *data) {}
#endif
/* --------------------------------------------------------------------
* TWI (i2c)
* -------------------------------------------------------------------- */
/*
* Prefer the GPIO code since the TWI controller isn't robust
* (gets overruns and underruns under load) and can only issue
* repeated STARTs in one scenario (the driver doesn't yet handle them).
*/
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
static struct i2c_gpio_platform_data pdata_i2c0 = {
.sda_pin = AT91_PIN_PA20,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
.name = "i2c-gpio",
.id = 0,
.dev.platform_data = &pdata_i2c0,
};
static struct i2c_gpio_platform_data pdata_i2c1 = {
.sda_pin = AT91_PIN_PB10,
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &pdata_i2c1,
};
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
i2c_register_board_info(i2c_id, devices, nr_devices);
if (i2c_id == 0) {
at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PA20, 1);
at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PA21, 1);
platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
at91_set_multi_drive(AT91_PIN_PB10, 1);
at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
at91_set_multi_drive(AT91_PIN_PB11, 1);
platform_device_register(&at91sam9g45_twi1_device);
}
}
#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
static struct resource twi0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TWI0,
.end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_TWI0,
.end = AT91SAM9G45_ID_TWI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_twi0_device = {
.name = "at91_i2c",
.id = 0,
.resource = twi0_resources,
.num_resources = ARRAY_SIZE(twi0_resources),
};
static struct resource twi1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TWI1,
.end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_TWI1,
.end = AT91SAM9G45_ID_TWI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_twi1_device = {
.name = "at91_i2c",
.id = 1,
.resource = twi1_resources,
.num_resources = ARRAY_SIZE(twi1_resources),
};
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
{
i2c_register_board_info(i2c_id, devices, nr_devices);
/* pins used for TWI interface */
if (i2c_id == 0) {
at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PA20, 1);
at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PA21, 1);
platform_device_register(&at91sam9g45_twi0_device);
} else {
at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
at91_set_multi_drive(AT91_PIN_PB10, 1);
at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
at91_set_multi_drive(AT91_PIN_PB11, 1);
platform_device_register(&at91sam9g45_twi1_device);
}
}
#else
void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* SPI
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SPI0,
.end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_SPI0,
.end = AT91SAM9G45_ID_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_spi0_device = {
.name = "atmel_spi",
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
};
static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
static struct resource spi1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SPI1,
.end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_SPI1,
.end = AT91SAM9G45_ID_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_spi1_device = {
.name = "atmel_spi",
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
};
static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
{
int i;
unsigned long cs_pin;
short enable_spi0 = 0;
short enable_spi1 = 0;
/* Choose SPI chip-selects */
for (i = 0; i < nr_devices; i++) {
if (devices[i].controller_data)
cs_pin = (unsigned long) devices[i].controller_data;
else if (devices[i].bus_num == 0)
cs_pin = spi0_standard_cs[devices[i].chip_select];
else
cs_pin = spi1_standard_cs[devices[i].chip_select];
if (devices[i].bus_num == 0)
enable_spi0 = 1;
else
enable_spi1 = 1;
/* enable chip-select pin */
at91_set_gpio_output(cs_pin, 1);
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
}
spi_register_board_info(devices, nr_devices);
/* Configure SPI bus(es) */
if (enable_spi0) {
at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
platform_device_register(&at91sam9g45_spi0_device);
}
if (enable_spi1) {
at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
platform_device_register(&at91sam9g45_spi1_device);
}
}
#else
void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
#endif
/* --------------------------------------------------------------------
* AC97
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_AC97C,
.end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_AC97C,
.end = AT91SAM9G45_ID_AC97C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ac97_device = {
.name = "atmel_ac97c",
.id = 0,
.dev = {
.dma_mask = &ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
.num_resources = ARRAY_SIZE(ac97_resources),
};
void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
/* reset */
if (gpio_is_valid(data->reset_pin))
at91_set_gpio_output(data->reset_pin, 0);
ac97_data = *data;
platform_device_register(&at91sam9g45_ac97_device);
}
#else
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
[0] = {
.start = AT91SAM9G45_LCDC_BASE,
.end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_LCDC,
.end = AT91SAM9G45_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91_lcdc_device = {
.name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
.num_resources = ARRAY_SIZE(lcdc_resources),
};
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
{
if (!data)
return;
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
#else
void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
#endif
/* --------------------------------------------------------------------
* Timer/Counter block
* -------------------------------------------------------------------- */
#ifdef CONFIG_ATMEL_TCLIB
static struct resource tcb0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TCB0,
.end = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_TCB,
.end = AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tcb0_device = {
.name = "atmel_tcb",
.id = 0,
.resource = tcb0_resources,
.num_resources = ARRAY_SIZE(tcb0_resources),
};
/* TCB1 begins with TC3 */
static struct resource tcb1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TCB1,
.end = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_TCB,
.end = AT91SAM9G45_ID_TCB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_tcb1_device = {
.name = "atmel_tcb",
.id = 1,
.resource = tcb1_resources,
.num_resources = ARRAY_SIZE(tcb1_resources),
};
static void __init at91_add_device_tc(void)
{
platform_device_register(&at91sam9g45_tcb0_device);
platform_device_register(&at91sam9g45_tcb1_device);
}
#else
static void __init at91_add_device_tc(void) { }
#endif
/* --------------------------------------------------------------------
* RTC
* -------------------------------------------------------------------- */
#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
static struct resource rtc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_RTC,
.end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_SYS,
.end = AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_rtc_device = {
.name = "at91_rtc",
.id = -1,
.resource = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
};
static void __init at91_add_device_rtc(void)
{
platform_device_register(&at91sam9g45_rtc_device);
}
#else
static void __init at91_add_device_rtc(void) {}
#endif
/* --------------------------------------------------------------------
* Touchscreen
* -------------------------------------------------------------------- */
#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
static struct at91_tsadcc_data tsadcc_data;
static struct resource tsadcc_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_TSC,
.end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_TSC,
.end = AT91SAM9G45_ID_TSC,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device at91sam9g45_tsadcc_device = {
.name = "atmel_tsadcc",
.id = -1,
.dev = {
.dma_mask = &tsadcc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &tsadcc_data,
},
.resource = tsadcc_resources,
.num_resources = ARRAY_SIZE(tsadcc_resources),
};
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
{
if (!data)
return;
at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
tsadcc_data = *data;
platform_device_register(&at91sam9g45_tsadcc_device);
}
#else
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
#endif
/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
static struct resource rtt_resources[] = {
{
.start = AT91SAM9G45_BASE_RTT,
.end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
.num_resources = ARRAY_SIZE(rtt_resources),
};
static void __init at91_add_device_rtt(void)
{
platform_device_register(&at91sam9g45_rtt_device);
}
/* --------------------------------------------------------------------
* TRNG
* -------------------------------------------------------------------- */
#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
static struct resource trng_resources[] = {
{
.start = AT91SAM9G45_BASE_TRNG,
.end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device at91sam9g45_trng_device = {
.name = "atmel-trng",
.id = -1,
.resource = trng_resources,
.num_resources = ARRAY_SIZE(trng_resources),
};
static void __init at91_add_device_trng(void)
{
platform_device_register(&at91sam9g45_trng_device);
}
#else
static void __init at91_add_device_trng(void) {}
#endif
/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct resource wdt_resources[] = {
{
.start = AT91SAM9G45_BASE_WDT,
.end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
.resource = wdt_resources,
.num_resources = ARRAY_SIZE(wdt_resources),
};
static void __init at91_add_device_watchdog(void)
{
platform_device_register(&at91sam9g45_wdt_device);
}
#else
static void __init at91_add_device_watchdog(void) {}
#endif
/* --------------------------------------------------------------------
* PWM
* --------------------------------------------------------------------*/
#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
static u32 pwm_mask;
static struct resource pwm_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_PWMC,
.end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_PWMC,
.end = AT91SAM9G45_ID_PWMC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_pwm0_device = {
.name = "atmel_pwm",
.id = -1,
.dev = {
.platform_data = &pwm_mask,
},
.resource = pwm_resources,
.num_resources = ARRAY_SIZE(pwm_resources),
};
void __init at91_add_device_pwm(u32 mask)
{
if (mask & (1 << AT91_PWM0))
at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
if (mask & (1 << AT91_PWM1))
at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
if (mask & (1 << AT91_PWM2))
at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
if (mask & (1 << AT91_PWM3))
at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
pwm_mask = mask;
platform_device_register(&at91sam9g45_pwm0_device);
}
#else
void __init at91_add_device_pwm(u32 mask) {}
#endif
/* --------------------------------------------------------------------
* SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
static u64 ssc0_dmamask = DMA_BIT_MASK(32);
static struct resource ssc0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SSC0,
.end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_SSC0,
.end = AT91SAM9G45_ID_SSC0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ssc0_device = {
.name = "ssc",
.id = 0,
.dev = {
.dma_mask = &ssc0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc0_resources,
.num_resources = ARRAY_SIZE(ssc0_resources),
};
static inline void configure_ssc0_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_A_periph(AT91_PIN_PD1, 1);
if (pins & ATMEL_SSC_TK)
at91_set_A_periph(AT91_PIN_PD0, 1);
if (pins & ATMEL_SSC_TD)
at91_set_A_periph(AT91_PIN_PD2, 1);
if (pins & ATMEL_SSC_RD)
at91_set_A_periph(AT91_PIN_PD3, 1);
if (pins & ATMEL_SSC_RK)
at91_set_A_periph(AT91_PIN_PD4, 1);
if (pins & ATMEL_SSC_RF)
at91_set_A_periph(AT91_PIN_PD5, 1);
}
static u64 ssc1_dmamask = DMA_BIT_MASK(32);
static struct resource ssc1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_SSC1,
.end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_SSC1,
.end = AT91SAM9G45_ID_SSC1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91sam9g45_ssc1_device = {
.name = "ssc",
.id = 1,
.dev = {
.dma_mask = &ssc1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ssc1_resources,
.num_resources = ARRAY_SIZE(ssc1_resources),
};
static inline void configure_ssc1_pins(unsigned pins)
{
if (pins & ATMEL_SSC_TF)
at91_set_A_periph(AT91_PIN_PD14, 1);
if (pins & ATMEL_SSC_TK)
at91_set_A_periph(AT91_PIN_PD12, 1);
if (pins & ATMEL_SSC_TD)
at91_set_A_periph(AT91_PIN_PD10, 1);
if (pins & ATMEL_SSC_RD)
at91_set_A_periph(AT91_PIN_PD11, 1);
if (pins & ATMEL_SSC_RK)
at91_set_A_periph(AT91_PIN_PD13, 1);
if (pins & ATMEL_SSC_RF)
at91_set_A_periph(AT91_PIN_PD15, 1);
}
/*
* SSC controllers are accessed through library code, instead of any
* kind of all-singing/all-dancing driver. For example one could be
* used by a particular I2S audio codec's driver, while another one
* on the same system might be used by a custom data capture driver.
*/
void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
struct platform_device *pdev;
/*
* NOTE: caller is responsible for passing information matching
* "pins" to whatever will be using each particular controller.
*/
switch (id) {
case AT91SAM9G45_ID_SSC0:
pdev = &at91sam9g45_ssc0_device;
configure_ssc0_pins(pins);
break;
case AT91SAM9G45_ID_SSC1:
pdev = &at91sam9g45_ssc1_device;
configure_ssc1_pins(pins);
break;
default:
return;
}
platform_device_register(pdev);
}
#else
void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
/* --------------------------------------------------------------------
* UART
* -------------------------------------------------------------------- */
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_DBGU,
.end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_SYS,
.end = AT91_ID_SYS,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
.dma_mask = &dbgu_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
};
static inline void configure_dbgu_pins(void)
{
at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
}
static struct resource uart0_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US0,
.end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_US0,
.end = AT91SAM9G45_ID_US0,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
.dma_mask = &uart0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US1,
.end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_US1,
.end = AT91SAM9G45_ID_US1,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
.dma_mask = &uart1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
if (pins & ATMEL_UART_RTS)
at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
if (pins & ATMEL_UART_CTS)
at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US2,
.end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_US2,
.end = AT91SAM9G45_ID_US2,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
.dma_mask = &uart2_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
[0] = {
.start = AT91SAM9G45_BASE_US3,
.end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91SAM9G45_ID_US3,
.end = AT91SAM9G45_ID_US3,
.flags = IORESOURCE_IRQ,
},
};
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
static struct platform_device at91sam9g45_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
.dma_mask = &uart3_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
if (pins & ATMEL_UART_RTS)
at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
if (pins & ATMEL_UART_CTS)
at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
struct atmel_uart_data *pdata;
switch (id) {
case 0: /* DBGU */
pdev = &at91sam9g45_dbgu_device;
configure_dbgu_pins();
break;
case AT91SAM9G45_ID_US0:
pdev = &at91sam9g45_uart0_device;
configure_usart0_pins(pins);
break;
case AT91SAM9G45_ID_US1:
pdev = &at91sam9g45_uart1_device;
configure_usart1_pins(pins);
break;
case AT91SAM9G45_ID_US2:
pdev = &at91sam9g45_uart2_device;
configure_usart2_pins(pins);
break;
case AT91SAM9G45_ID_US3:
pdev = &at91sam9g45_uart3_device;
configure_usart3_pins(pins);
break;
default:
return;
}
pdata = pdev->dev.platform_data;
pdata->num = portnr; /* update to mapped ID */
if (portnr < ATMEL_MAX_UART)
at91_uarts[portnr] = pdev;
}
void __init at91_set_serial_console(unsigned portnr)
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
}
}
void __init at91_add_device_serial(void)
{
int i;
for (i = 0; i < ATMEL_MAX_UART; i++) {
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
if (!atmel_default_console_device)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
/* -------------------------------------------------------------------- */
/*
* These devices are always present and don't need any board-specific
* setup.
*/
static int __init at91_add_standard_devices(void)
{
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
return 0;
}
arch_initcall(at91_add_standard_devices);
Reference in New Issue View Git Blame Copy Permalink