Lorenzo Bianconi d3f770582a iio: imu: st_lsm6dsx: add system power management support ... Add system sleep power management support to st_lsm6dsx driver. In particular during suspend phase each sensor is disabled and hw fifo is configured in bypass in order to avoid subsequent I/O operations. The patch has been tested on HiKey board device Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-04-30 17:55:15 +01:00
..
accel	iio: st_pressure: st_accel: Initialise sensor platform data properly	2017-04-26 06:37:53 +01:00
adc	iio: adc: rcar-gyroadc: Derive interface clock speed from fck clock	2017-04-27 05:58:03 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value	2017-04-27 07:16:45 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	Fifth set of IIO fixes for the 4.11 cycle.	2017-04-18 19:38:38 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: Remove unnecessary cast on void pointer	2017-04-02 09:50:32 +01:00
imu	iio: imu: st_lsm6dsx: add system power management support	2017-04-30 17:55:15 +01:00
light	iio: isl29028: add isl29030 support	2017-04-30 17:26:04 +01:00
magnetometer	Merge 4.11-rc4 into staging-next	2017-03-27 09:11:25 +02:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: st_pressure: st_accel: Initialise sensor platform data properly	2017-04-26 06:37:53 +01:00
proximity	iio: proximity: as3935: move storm out of range check	2017-04-27 07:22:46 +01:00
temperature	iio: mlx96014: Add OF device ID table	2017-03-19 10:49:24 +00:00
trigger	Fifth set of IIO fixes for the 4.11 cycle.	2017-04-18 19:38:38 +02:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
iio_core_trigger.h	…
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: core: Fix suspicious sizeof usage	2017-04-27 06:30:52 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00