UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k
History
Felix Fietkau 872b5d814f ath9k: do not access hardware on IRQs during reset 
Instead of killing interrupts during reset when the first one happens,
kill them before issuing the reset.
This fixes an easy to reproduce crash with multiple cards sharing the
same IRQ.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
 		2014-12-01 15:57:22 -05:00
..
Kconfig ath9k_common: make sure DEBUG_FS and RELAY enabled 2014-11-19 15:50:04 -05:00
Makefile ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
ahb.c ath9k: Initialize channel context ops on ahb probe 2014-07-29 10:32:57 -04:00
ani.c ath9k_hw: do not lower ANI setting below default on AR913x 2014-04-30 11:39:54 -04:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c ath9k: add support for reporting per-chain signal strength 2013-12-18 15:23:19 -05:00
ar953x_initvals.h ath9k: Update QCA953x initvals 2014-11-17 15:32:15 -05:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2014-10-27 14:16:17 -04:00
ar5008_initvals.h
…
ar5008_phy.c ath9k: set pulse_rssi threshold to 15 2014-10-30 15:24:49 -04:00
ar9001_initvals.h
…
ar9002_calib.c ath9k_hw: start initial NF calibration after PA calibration on <AR9003 2014-10-27 14:16:18 -04:00
ar9002_hw.c ath9k: Register supported HW hang checks 2014-01-03 15:36:57 -05:00
ar9002_initvals.h ath9k: Enable WoW only for AR9462 2013-06-03 15:55:46 -04:00
ar9002_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9002_phy.c ath9k: For AR9271 chipsets, set count = 0 for endless samples. 2014-11-11 16:31:14 -05:00
ar9002_phy.h ath9k: Program HW for WB195 diversity 2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h ath9k: Use a separate TX gain table for WZR-HP-G450H 2013-12-09 15:37:58 -05:00
ar9003_calib.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
ar9003_eeprom.c ath9k: add TX power per-rate tables 2014-11-25 14:09:56 -05:00
ar9003_eeprom.h ath9k: Update BaseExtension_1 eeprom structure 2013-12-18 15:23:44 -05:00
ar9003_hw.c ath9k: Use new QCA953x initvals 2014-11-17 15:32:15 -05:00
ar9003_mac.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
ar9003_mac.h
…
ar9003_mci.c ath9k: Use bitops for calibration flags 2013-09-26 15:13:47 -04:00
ar9003_mci.h
…
ar9003_paprd.c
…
ar9003_phy.c ath9k: add TX power per-rate tables 2014-11-25 14:09:56 -05:00
ar9003_phy.h ath9k: Fix regulatory compliance 2014-01-03 15:37:01 -05:00
ar9003_rtt.c ath9k: Fix PeakDetect calibration for AR9462 2013-09-26 15:13:47 -04:00
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Fix wow.c compilation 2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h ath9k: Remove duplicate initvals for AR9462 v2.1 2013-12-02 14:25:02 -05:00
ar9485_initvals.h ath9k: Identify duplicate AR9485 initvals 2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h ath9k: Identify duplicate AR9565 v1.0 initvals 2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h ath9k: Add initvals for AR9565 1.1 2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2014-10-27 14:16:17 -04:00
ath9k.h ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
beacon.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
btcoex.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
btcoex.h
…
calib.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR 2014-11-19 18:46:09 +01:00
common-beacon.c Revert "ath9k: Calculate sleep duration" 2014-09-11 14:17:20 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-spectral.c ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
common-spectral.h ath9k: common-spectral: don't depend from ATH9K_DEBUGFS 2014-11-17 15:32:14 -05:00
common.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
common.h ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
debug.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
debug.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
dfs.c ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.h ath9k/ath: move dfs pattern detector to ath 2013-10-18 14:03:54 -04:00
dfs_debug.c ath9k: dfs_debug fix possible NULL dereference 2013-11-11 14:42:43 -05:00
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dynack.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom.c
…
eeprom.h
…
eeprom_4k.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_9287.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_def.c ath9k: add support for endian swap of eeprom from platform data 2014-10-27 14:16:19 -04:00
gpio.c ath9k: Fix LED configuration 2014-11-17 15:32:16 -05:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
…
htc.h ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debug 2014-11-11 17:12:17 -05:00
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: add spectral scan debug interface 2014-11-11 16:31:15 -05:00
htc_drv_gpio.c ath9k_htc: reconfigure led_gpios after resume 2013-12-18 15:23:02 -05:00
htc_drv_init.c ath9k_htc: ath9k_htc_op_ps_wakeup() can be static 2014-11-17 15:32:14 -05:00
htc_drv_main.c mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR 2014-11-19 18:46:09 +01:00
htc_drv_txrx.c ath9k_htc: process rx spectral packets 2014-11-11 16:31:15 -05:00
htc_hst.c ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
hw-ops.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
hw.c Merge commit '4e6ce4dc7ce71d0886908d55129d5d6482a27ff9' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2014-11-19 15:38:48 -05:00
hw.h ath9k: fix BE/BK queue order 2014-12-01 15:57:21 -05:00
init.c ath9k: prevent early IRQs from accessing hardware 2014-12-01 15:57:22 -05:00
link.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
mac.c ath9k_hw: fix hardware queue allocation 2014-12-01 15:57:21 -05:00
mac.h ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00
main.c ath9k: do not access hardware on IRQs during reset 2014-12-01 15:57:22 -05:00
mci.c ath9k: Move caldata into channel context 2014-06-19 15:49:18 -04:00
mci.h
…
pci.c ath9k: Fix LED configuration 2014-11-17 15:32:16 -05:00
phy.h ath9k: Fix diversity combining for AR9285 2013-07-24 11:02:39 -04:00
recv.c ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
reg.h ath9k: add TX power per-rate tables 2014-11-25 14:09:56 -05:00
tx99.c ath9k: Unify reset API 2014-10-27 14:16:14 -04:00
wmi.c
…
wmi.h ath9k: mark wmi_event_swba as __packed 2013-09-26 15:13:48 -04:00
wow.c ath9k: Fix interface accounting 2014-09-09 15:27:21 -04:00
xmit.c ath9k: add TPC capability to TX descriptor path 2014-11-25 14:09:56 -05:00