429 lines
9.6 KiB
C
429 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* 1-Wire implementation for the ds2438 chip
|
|
*
|
|
* Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/w1.h>
|
|
|
|
#define W1_FAMILY_DS2438 0x26
|
|
|
|
#define W1_DS2438_RETRIES 3
|
|
|
|
/* Memory commands */
|
|
#define W1_DS2438_READ_SCRATCH 0xBE
|
|
#define W1_DS2438_WRITE_SCRATCH 0x4E
|
|
#define W1_DS2438_COPY_SCRATCH 0x48
|
|
#define W1_DS2438_RECALL_MEMORY 0xB8
|
|
/* Register commands */
|
|
#define W1_DS2438_CONVERT_TEMP 0x44
|
|
#define W1_DS2438_CONVERT_VOLTAGE 0xB4
|
|
|
|
#define DS2438_PAGE_SIZE 8
|
|
#define DS2438_ADC_INPUT_VAD 0
|
|
#define DS2438_ADC_INPUT_VDD 1
|
|
#define DS2438_MAX_CONVERSION_TIME 10 /* ms */
|
|
|
|
/* Page #0 definitions */
|
|
#define DS2438_STATUS_REG 0x00 /* Status/Configuration Register */
|
|
#define DS2438_STATUS_IAD (1 << 0) /* Current A/D Control Bit */
|
|
#define DS2438_STATUS_CA (1 << 1) /* Current Accumulator Configuration */
|
|
#define DS2438_STATUS_EE (1 << 2) /* Current Accumulator Shadow Selector bit */
|
|
#define DS2438_STATUS_AD (1 << 3) /* Voltage A/D Input Select Bit */
|
|
#define DS2438_STATUS_TB (1 << 4) /* Temperature Busy Flag */
|
|
#define DS2438_STATUS_NVB (1 << 5) /* Nonvolatile Memory Busy Flag */
|
|
#define DS2438_STATUS_ADB (1 << 6) /* A/D Converter Busy Flag */
|
|
|
|
#define DS2438_TEMP_LSB 0x01
|
|
#define DS2438_TEMP_MSB 0x02
|
|
#define DS2438_VOLTAGE_LSB 0x03
|
|
#define DS2438_VOLTAGE_MSB 0x04
|
|
#define DS2438_CURRENT_LSB 0x05
|
|
#define DS2438_CURRENT_MSB 0x06
|
|
#define DS2438_THRESHOLD 0x07
|
|
|
|
static int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf)
|
|
{
|
|
unsigned int retries = W1_DS2438_RETRIES;
|
|
u8 w1_buf[2];
|
|
u8 crc;
|
|
size_t count;
|
|
|
|
while (retries--) {
|
|
crc = 0;
|
|
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_RECALL_MEMORY;
|
|
w1_buf[1] = 0x00;
|
|
w1_write_block(sl->master, w1_buf, 2);
|
|
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_READ_SCRATCH;
|
|
w1_buf[1] = 0x00;
|
|
w1_write_block(sl->master, w1_buf, 2);
|
|
|
|
count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1);
|
|
if (count == DS2438_PAGE_SIZE + 1) {
|
|
crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE);
|
|
|
|
/* check for correct CRC */
|
|
if ((u8)buf[DS2438_PAGE_SIZE] == crc)
|
|
return 0;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature)
|
|
{
|
|
unsigned int retries = W1_DS2438_RETRIES;
|
|
u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
|
|
unsigned int tm = DS2438_MAX_CONVERSION_TIME;
|
|
unsigned long sleep_rem;
|
|
int ret;
|
|
|
|
mutex_lock(&sl->master->bus_mutex);
|
|
|
|
while (retries--) {
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP);
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
sleep_rem = msleep_interruptible(tm);
|
|
if (sleep_rem != 0) {
|
|
ret = -1;
|
|
goto post_unlock;
|
|
}
|
|
|
|
if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
|
|
ret = -1;
|
|
goto post_unlock;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
|
|
*temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]);
|
|
ret = 0;
|
|
} else
|
|
ret = -1;
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
|
|
post_unlock:
|
|
return ret;
|
|
}
|
|
|
|
static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
|
|
{
|
|
unsigned int retries = W1_DS2438_RETRIES;
|
|
u8 w1_buf[3];
|
|
u8 status;
|
|
int perform_write = 0;
|
|
|
|
while (retries--) {
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_RECALL_MEMORY;
|
|
w1_buf[1] = 0x00;
|
|
w1_write_block(sl->master, w1_buf, 2);
|
|
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_READ_SCRATCH;
|
|
w1_buf[1] = 0x00;
|
|
w1_write_block(sl->master, w1_buf, 2);
|
|
|
|
/* reading one byte of result */
|
|
status = w1_read_8(sl->master);
|
|
|
|
/* if bit0=1, set a value to a mask for easy compare */
|
|
if (value)
|
|
value = mask;
|
|
|
|
if ((status & mask) == value)
|
|
return 0; /* already set as requested */
|
|
else {
|
|
/* changing bit */
|
|
status ^= mask;
|
|
perform_write = 1;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (perform_write) {
|
|
retries = W1_DS2438_RETRIES;
|
|
while (retries--) {
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_WRITE_SCRATCH;
|
|
w1_buf[1] = 0x00;
|
|
w1_buf[2] = status;
|
|
w1_write_block(sl->master, w1_buf, 3);
|
|
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_buf[0] = W1_DS2438_COPY_SCRATCH;
|
|
w1_buf[1] = 0x00;
|
|
w1_write_block(sl->master, w1_buf, 2);
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static int w1_ds2438_get_voltage(struct w1_slave *sl,
|
|
int adc_input, uint16_t *voltage)
|
|
{
|
|
unsigned int retries = W1_DS2438_RETRIES;
|
|
u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
|
|
unsigned int tm = DS2438_MAX_CONVERSION_TIME;
|
|
unsigned long sleep_rem;
|
|
int ret;
|
|
|
|
mutex_lock(&sl->master->bus_mutex);
|
|
|
|
if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) {
|
|
ret = -1;
|
|
goto pre_unlock;
|
|
}
|
|
|
|
while (retries--) {
|
|
if (w1_reset_select_slave(sl))
|
|
continue;
|
|
w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE);
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
sleep_rem = msleep_interruptible(tm);
|
|
if (sleep_rem != 0) {
|
|
ret = -1;
|
|
goto post_unlock;
|
|
}
|
|
|
|
if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
|
|
ret = -1;
|
|
goto post_unlock;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
|
|
*voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]);
|
|
ret = 0;
|
|
} else
|
|
ret = -1;
|
|
|
|
pre_unlock:
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
|
|
post_unlock:
|
|
return ret;
|
|
}
|
|
|
|
static int w1_ds2438_get_current(struct w1_slave *sl, int16_t *voltage)
|
|
{
|
|
u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
|
|
int ret;
|
|
|
|
mutex_lock(&sl->master->bus_mutex);
|
|
|
|
if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
|
|
/* The voltage measured across current sense resistor RSENS. */
|
|
*voltage = (((int16_t) w1_buf[DS2438_CURRENT_MSB]) << 8) | ((int16_t) w1_buf[DS2438_CURRENT_LSB]);
|
|
ret = 0;
|
|
} else
|
|
ret = -1;
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t iad_write(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
|
|
if (count != 1 || off != 0)
|
|
return -EFAULT;
|
|
|
|
mutex_lock(&sl->master->bus_mutex);
|
|
|
|
if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0)
|
|
ret = 1;
|
|
else
|
|
ret = -EIO;
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t iad_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
int16_t voltage;
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
if (w1_ds2438_get_current(sl, &voltage) == 0) {
|
|
ret = snprintf(buf, count, "%i\n", voltage);
|
|
} else
|
|
ret = -EIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t page0_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&sl->master->bus_mutex);
|
|
|
|
/* Read no more than page0 size */
|
|
if (count > DS2438_PAGE_SIZE)
|
|
count = DS2438_PAGE_SIZE;
|
|
|
|
if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
|
|
memcpy(buf, &w1_buf, count);
|
|
ret = count;
|
|
} else
|
|
ret = -EIO;
|
|
|
|
mutex_unlock(&sl->master->bus_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
int16_t temp;
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
if (w1_ds2438_get_temperature(sl, &temp) == 0) {
|
|
ret = snprintf(buf, count, "%i\n", temp);
|
|
} else
|
|
ret = -EIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t vad_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
uint16_t voltage;
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
|
|
ret = snprintf(buf, count, "%u\n", voltage);
|
|
} else
|
|
ret = -EIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
|
|
struct bin_attribute *bin_attr, char *buf,
|
|
loff_t off, size_t count)
|
|
{
|
|
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
|
int ret;
|
|
uint16_t voltage;
|
|
|
|
if (off != 0)
|
|
return 0;
|
|
if (!buf)
|
|
return -EINVAL;
|
|
|
|
if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
|
|
ret = snprintf(buf, count, "%u\n", voltage);
|
|
} else
|
|
ret = -EIO;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, iad_read, iad_write, 0);
|
|
static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
|
|
static BIN_ATTR_RO(temperature, 0/* real length varies */);
|
|
static BIN_ATTR_RO(vad, 0/* real length varies */);
|
|
static BIN_ATTR_RO(vdd, 0/* real length varies */);
|
|
|
|
static struct bin_attribute *w1_ds2438_bin_attrs[] = {
|
|
&bin_attr_iad,
|
|
&bin_attr_page0,
|
|
&bin_attr_temperature,
|
|
&bin_attr_vad,
|
|
&bin_attr_vdd,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group w1_ds2438_group = {
|
|
.bin_attrs = w1_ds2438_bin_attrs,
|
|
};
|
|
|
|
static const struct attribute_group *w1_ds2438_groups[] = {
|
|
&w1_ds2438_group,
|
|
NULL,
|
|
};
|
|
|
|
static const struct w1_family_ops w1_ds2438_fops = {
|
|
.groups = w1_ds2438_groups,
|
|
};
|
|
|
|
static struct w1_family w1_ds2438_family = {
|
|
.fid = W1_FAMILY_DS2438,
|
|
.fops = &w1_ds2438_fops,
|
|
};
|
|
module_w1_family(w1_ds2438_family);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>");
|
|
MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor");
|
|
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438));
|