1627 lines
46 KiB
C
1627 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/* Copyright (C) 2009 - 2019 Broadcom */
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/list.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/module.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci-ecam.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
|
|
#define BRCM_PCIE_CAP_REGS 0x00ac
|
|
|
|
/* Broadcom STB PCIe Register Offsets */
|
|
#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
|
|
#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
|
|
#define PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN 0x0
|
|
|
|
#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
|
|
#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
|
|
|
|
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc
|
|
#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00
|
|
|
|
#define PCIE_RC_DL_MDIO_ADDR 0x1100
|
|
#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
|
|
#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
|
|
|
|
#define PCIE_MISC_MISC_CTRL 0x4008
|
|
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK 0x80
|
|
#define PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK 0x400
|
|
#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
|
|
#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
|
|
#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
|
|
|
|
#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
|
|
#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x07c00000
|
|
#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x0000001f
|
|
#define SCB_SIZE_MASK(x) PCIE_MISC_MISC_CTRL_SCB ## x ## _SIZE_MASK
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
|
|
#define PCIE_MEM_WIN0_LO(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 8)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
|
|
#define PCIE_MEM_WIN0_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
|
|
#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
|
|
|
|
#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
|
|
#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
|
|
#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
|
|
|
|
#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
|
|
#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
|
|
|
|
#define PCIE_MISC_MSI_BAR_CONFIG_LO 0x4044
|
|
#define PCIE_MISC_MSI_BAR_CONFIG_HI 0x4048
|
|
|
|
#define PCIE_MISC_MSI_DATA_CONFIG 0x404c
|
|
#define PCIE_MISC_MSI_DATA_CONFIG_VAL_32 0xffe06540
|
|
#define PCIE_MISC_MSI_DATA_CONFIG_VAL_8 0xfff86540
|
|
|
|
#define PCIE_MISC_PCIE_CTRL 0x4064
|
|
#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
|
|
#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
|
|
|
|
#define PCIE_MISC_PCIE_STATUS 0x4068
|
|
#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
|
|
#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
|
|
#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
|
|
#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
|
|
|
|
#define PCIE_MISC_REVISION 0x406c
|
|
#define BRCM_PCIE_HW_REV_33 0x0303
|
|
#define BRCM_PCIE_HW_REV_3_20 0x0320
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
|
|
#define PCIE_MEM_WIN0_BASE_LIMIT(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT + ((win) * 4)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
|
|
#define PCIE_MEM_WIN0_BASE_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
|
|
#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
|
|
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
|
|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
|
|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
|
|
#define PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x00800000
|
|
|
|
|
|
#define PCIE_INTR2_CPU_BASE 0x4300
|
|
#define PCIE_MSI_INTR2_BASE 0x4500
|
|
/* Offsets from PCIE_INTR2_CPU_BASE and PCIE_MSI_INTR2_BASE */
|
|
#define MSI_INT_STATUS 0x0
|
|
#define MSI_INT_CLR 0x8
|
|
#define MSI_INT_MASK_SET 0x10
|
|
#define MSI_INT_MASK_CLR 0x14
|
|
|
|
#define PCIE_EXT_CFG_DATA 0x8000
|
|
#define PCIE_EXT_CFG_INDEX 0x9000
|
|
|
|
#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
|
|
#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
|
|
|
|
#define RGR1_SW_INIT_1_INIT_GENERIC_MASK 0x2
|
|
#define RGR1_SW_INIT_1_INIT_GENERIC_SHIFT 0x1
|
|
#define RGR1_SW_INIT_1_INIT_7278_MASK 0x1
|
|
#define RGR1_SW_INIT_1_INIT_7278_SHIFT 0x0
|
|
|
|
/* PCIe parameters */
|
|
#define BRCM_NUM_PCIE_OUT_WINS 0x4
|
|
#define BRCM_INT_PCI_MSI_NR 32
|
|
#define BRCM_INT_PCI_MSI_LEGACY_NR 8
|
|
#define BRCM_INT_PCI_MSI_SHIFT 0
|
|
#define BRCM_INT_PCI_MSI_MASK GENMASK(BRCM_INT_PCI_MSI_NR - 1, 0)
|
|
#define BRCM_INT_PCI_MSI_LEGACY_MASK GENMASK(31, \
|
|
32 - BRCM_INT_PCI_MSI_LEGACY_NR)
|
|
|
|
/* MSI target addresses */
|
|
#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
|
|
#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
|
|
|
|
/* MDIO registers */
|
|
#define MDIO_PORT0 0x0
|
|
#define MDIO_DATA_MASK 0x7fffffff
|
|
#define MDIO_PORT_MASK 0xf0000
|
|
#define MDIO_REGAD_MASK 0xffff
|
|
#define MDIO_CMD_MASK 0xfff00000
|
|
#define MDIO_CMD_READ 0x1
|
|
#define MDIO_CMD_WRITE 0x0
|
|
#define MDIO_DATA_DONE_MASK 0x80000000
|
|
#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
|
|
#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
|
|
#define SSC_REGS_ADDR 0x1100
|
|
#define SET_ADDR_OFFSET 0x1f
|
|
#define SSC_CNTL_OFFSET 0x2
|
|
#define SSC_CNTL_OVRD_EN_MASK 0x8000
|
|
#define SSC_CNTL_OVRD_VAL_MASK 0x4000
|
|
#define SSC_STATUS_OFFSET 0x1
|
|
#define SSC_STATUS_SSC_MASK 0x400
|
|
#define SSC_STATUS_PLL_LOCK_MASK 0x800
|
|
#define PCIE_BRCM_MAX_MEMC 3
|
|
|
|
#define IDX_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_INDEX])
|
|
#define DATA_ADDR(pcie) (pcie->reg_offsets[EXT_CFG_DATA])
|
|
#define PCIE_RGR1_SW_INIT_1(pcie) (pcie->reg_offsets[RGR1_SW_INIT_1])
|
|
|
|
/* Rescal registers */
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL 0xc700
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS 0x3
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK 0x4
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT 0x2
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK 0x2
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT 0x1
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK 0x1
|
|
#define PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT 0x0
|
|
|
|
/* Forward declarations */
|
|
struct brcm_pcie;
|
|
|
|
enum {
|
|
RGR1_SW_INIT_1,
|
|
EXT_CFG_INDEX,
|
|
EXT_CFG_DATA,
|
|
};
|
|
|
|
enum {
|
|
RGR1_SW_INIT_1_INIT_MASK,
|
|
RGR1_SW_INIT_1_INIT_SHIFT,
|
|
};
|
|
|
|
enum pcie_type {
|
|
GENERIC,
|
|
BCM7425,
|
|
BCM7435,
|
|
BCM4908,
|
|
BCM7278,
|
|
BCM2711,
|
|
};
|
|
|
|
struct pcie_cfg_data {
|
|
const int *offsets;
|
|
const enum pcie_type type;
|
|
void (*perst_set)(struct brcm_pcie *pcie, u32 val);
|
|
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
|
|
};
|
|
|
|
struct subdev_regulators {
|
|
unsigned int num_supplies;
|
|
struct regulator_bulk_data supplies[];
|
|
};
|
|
|
|
struct brcm_msi {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct device_node *np;
|
|
struct irq_domain *msi_domain;
|
|
struct irq_domain *inner_domain;
|
|
struct mutex lock; /* guards the alloc/free operations */
|
|
u64 target_addr;
|
|
int irq;
|
|
DECLARE_BITMAP(used, BRCM_INT_PCI_MSI_NR);
|
|
bool legacy;
|
|
/* Some chips have MSIs in bits [31..24] of a shared register. */
|
|
int legacy_shift;
|
|
int nr; /* No. of MSI available, depends on chip */
|
|
/* This is the base pointer for interrupt status/set/clr regs */
|
|
void __iomem *intr_base;
|
|
};
|
|
|
|
/* Internal PCIe Host Controller Information.*/
|
|
struct brcm_pcie {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct device_node *np;
|
|
bool ssc;
|
|
int gen;
|
|
u64 msi_target_addr;
|
|
struct brcm_msi *msi;
|
|
const int *reg_offsets;
|
|
enum pcie_type type;
|
|
struct reset_control *rescal;
|
|
struct reset_control *perst_reset;
|
|
int num_memc;
|
|
u64 memc_size[PCIE_BRCM_MAX_MEMC];
|
|
u32 hw_rev;
|
|
void (*perst_set)(struct brcm_pcie *pcie, u32 val);
|
|
void (*bridge_sw_init_set)(struct brcm_pcie *pcie, u32 val);
|
|
struct subdev_regulators *sr;
|
|
bool ep_wakeup_capable;
|
|
};
|
|
|
|
static inline bool is_bmips(const struct brcm_pcie *pcie)
|
|
{
|
|
return pcie->type == BCM7435 || pcie->type == BCM7425;
|
|
}
|
|
|
|
/*
|
|
* This is to convert the size of the inbound "BAR" region to the
|
|
* non-linear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
|
|
*/
|
|
static int brcm_pcie_encode_ibar_size(u64 size)
|
|
{
|
|
int log2_in = ilog2(size);
|
|
|
|
if (log2_in >= 12 && log2_in <= 15)
|
|
/* Covers 4KB to 32KB (inclusive) */
|
|
return (log2_in - 12) + 0x1c;
|
|
else if (log2_in >= 16 && log2_in <= 35)
|
|
/* Covers 64KB to 32GB, (inclusive) */
|
|
return log2_in - 15;
|
|
/* Something is awry so disable */
|
|
return 0;
|
|
}
|
|
|
|
static u32 brcm_pcie_mdio_form_pkt(int port, int regad, int cmd)
|
|
{
|
|
u32 pkt = 0;
|
|
|
|
pkt |= FIELD_PREP(MDIO_PORT_MASK, port);
|
|
pkt |= FIELD_PREP(MDIO_REGAD_MASK, regad);
|
|
pkt |= FIELD_PREP(MDIO_CMD_MASK, cmd);
|
|
|
|
return pkt;
|
|
}
|
|
|
|
/* negative return value indicates error */
|
|
static int brcm_pcie_mdio_read(void __iomem *base, u8 port, u8 regad, u32 *val)
|
|
{
|
|
u32 data;
|
|
int err;
|
|
|
|
writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_READ),
|
|
base + PCIE_RC_DL_MDIO_ADDR);
|
|
readl(base + PCIE_RC_DL_MDIO_ADDR);
|
|
err = readl_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_RD_DATA, data,
|
|
MDIO_RD_DONE(data), 10, 100);
|
|
*val = FIELD_GET(MDIO_DATA_MASK, data);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* negative return value indicates error */
|
|
static int brcm_pcie_mdio_write(void __iomem *base, u8 port,
|
|
u8 regad, u16 wrdata)
|
|
{
|
|
u32 data;
|
|
int err;
|
|
|
|
writel(brcm_pcie_mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
|
|
base + PCIE_RC_DL_MDIO_ADDR);
|
|
readl(base + PCIE_RC_DL_MDIO_ADDR);
|
|
writel(MDIO_DATA_DONE_MASK | wrdata, base + PCIE_RC_DL_MDIO_WR_DATA);
|
|
|
|
err = readw_poll_timeout_atomic(base + PCIE_RC_DL_MDIO_WR_DATA, data,
|
|
MDIO_WT_DONE(data), 10, 100);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Configures device for Spread Spectrum Clocking (SSC) mode; a negative
|
|
* return value indicates error.
|
|
*/
|
|
static int brcm_pcie_set_ssc(struct brcm_pcie *pcie)
|
|
{
|
|
int pll, ssc;
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0, SET_ADDR_OFFSET,
|
|
SSC_REGS_ADDR);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
|
|
SSC_CNTL_OFFSET, &tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_EN_MASK);
|
|
u32p_replace_bits(&tmp, 1, SSC_CNTL_OVRD_VAL_MASK);
|
|
ret = brcm_pcie_mdio_write(pcie->base, MDIO_PORT0,
|
|
SSC_CNTL_OFFSET, tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(1000, 2000);
|
|
ret = brcm_pcie_mdio_read(pcie->base, MDIO_PORT0,
|
|
SSC_STATUS_OFFSET, &tmp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ssc = FIELD_GET(SSC_STATUS_SSC_MASK, tmp);
|
|
pll = FIELD_GET(SSC_STATUS_PLL_LOCK_MASK, tmp);
|
|
|
|
return ssc && pll ? 0 : -EIO;
|
|
}
|
|
|
|
/* Limits operation to a specific generation (1, 2, or 3) */
|
|
static void brcm_pcie_set_gen(struct brcm_pcie *pcie, int gen)
|
|
{
|
|
u16 lnkctl2 = readw(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
|
|
u32 lnkcap = readl(pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
|
|
|
|
lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
|
|
writel(lnkcap, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
|
|
|
|
lnkctl2 = (lnkctl2 & ~0xf) | gen;
|
|
writew(lnkctl2, pcie->base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
|
|
}
|
|
|
|
static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
|
|
unsigned int win, u64 cpu_addr,
|
|
u64 pcie_addr, u64 size)
|
|
{
|
|
u32 cpu_addr_mb_high, limit_addr_mb_high;
|
|
phys_addr_t cpu_addr_mb, limit_addr_mb;
|
|
int high_addr_shift;
|
|
u32 tmp;
|
|
|
|
/* Set the base of the pcie_addr window */
|
|
writel(lower_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_LO(win));
|
|
writel(upper_32_bits(pcie_addr), pcie->base + PCIE_MEM_WIN0_HI(win));
|
|
|
|
/* Write the addr base & limit lower bits (in MBs) */
|
|
cpu_addr_mb = cpu_addr / SZ_1M;
|
|
limit_addr_mb = (cpu_addr + size - 1) / SZ_1M;
|
|
|
|
tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
|
|
u32p_replace_bits(&tmp, cpu_addr_mb,
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
|
|
u32p_replace_bits(&tmp, limit_addr_mb,
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK);
|
|
writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_LIMIT(win));
|
|
|
|
if (is_bmips(pcie))
|
|
return;
|
|
|
|
/* Write the cpu & limit addr upper bits */
|
|
high_addr_shift =
|
|
HWEIGHT32(PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK);
|
|
|
|
cpu_addr_mb_high = cpu_addr_mb >> high_addr_shift;
|
|
tmp = readl(pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
|
|
u32p_replace_bits(&tmp, cpu_addr_mb_high,
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK);
|
|
writel(tmp, pcie->base + PCIE_MEM_WIN0_BASE_HI(win));
|
|
|
|
limit_addr_mb_high = limit_addr_mb >> high_addr_shift;
|
|
tmp = readl(pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
|
|
u32p_replace_bits(&tmp, limit_addr_mb_high,
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK);
|
|
writel(tmp, pcie->base + PCIE_MEM_WIN0_LIMIT_HI(win));
|
|
}
|
|
|
|
static struct irq_chip brcm_msi_irq_chip = {
|
|
.name = "BRCM STB PCIe MSI",
|
|
.irq_ack = irq_chip_ack_parent,
|
|
.irq_mask = pci_msi_mask_irq,
|
|
.irq_unmask = pci_msi_unmask_irq,
|
|
};
|
|
|
|
static struct msi_domain_info brcm_msi_domain_info = {
|
|
/* Multi MSI is supported by the controller, but not by this driver */
|
|
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
|
|
MSI_FLAG_MULTI_PCI_MSI),
|
|
.chip = &brcm_msi_irq_chip,
|
|
};
|
|
|
|
static void brcm_pcie_msi_isr(struct irq_desc *desc)
|
|
{
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
unsigned long status;
|
|
struct brcm_msi *msi;
|
|
struct device *dev;
|
|
u32 bit;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
msi = irq_desc_get_handler_data(desc);
|
|
dev = msi->dev;
|
|
|
|
status = readl(msi->intr_base + MSI_INT_STATUS);
|
|
status >>= msi->legacy_shift;
|
|
|
|
for_each_set_bit(bit, &status, msi->nr) {
|
|
int ret;
|
|
ret = generic_handle_domain_irq(msi->inner_domain, bit);
|
|
if (ret)
|
|
dev_dbg(dev, "unexpected MSI\n");
|
|
}
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static void brcm_msi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
|
|
{
|
|
struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
|
|
|
|
msg->address_lo = lower_32_bits(msi->target_addr);
|
|
msg->address_hi = upper_32_bits(msi->target_addr);
|
|
msg->data = (0xffff & PCIE_MISC_MSI_DATA_CONFIG_VAL_32) | data->hwirq;
|
|
}
|
|
|
|
static int brcm_msi_set_affinity(struct irq_data *irq_data,
|
|
const struct cpumask *mask, bool force)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void brcm_msi_ack_irq(struct irq_data *data)
|
|
{
|
|
struct brcm_msi *msi = irq_data_get_irq_chip_data(data);
|
|
const int shift_amt = data->hwirq + msi->legacy_shift;
|
|
|
|
writel(1 << shift_amt, msi->intr_base + MSI_INT_CLR);
|
|
}
|
|
|
|
|
|
static struct irq_chip brcm_msi_bottom_irq_chip = {
|
|
.name = "BRCM STB MSI",
|
|
.irq_compose_msi_msg = brcm_msi_compose_msi_msg,
|
|
.irq_set_affinity = brcm_msi_set_affinity,
|
|
.irq_ack = brcm_msi_ack_irq,
|
|
};
|
|
|
|
static int brcm_msi_alloc(struct brcm_msi *msi, unsigned int nr_irqs)
|
|
{
|
|
int hwirq;
|
|
|
|
mutex_lock(&msi->lock);
|
|
hwirq = bitmap_find_free_region(msi->used, msi->nr,
|
|
order_base_2(nr_irqs));
|
|
mutex_unlock(&msi->lock);
|
|
|
|
return hwirq;
|
|
}
|
|
|
|
static void brcm_msi_free(struct brcm_msi *msi, unsigned long hwirq,
|
|
unsigned int nr_irqs)
|
|
{
|
|
mutex_lock(&msi->lock);
|
|
bitmap_release_region(msi->used, hwirq, order_base_2(nr_irqs));
|
|
mutex_unlock(&msi->lock);
|
|
}
|
|
|
|
static int brcm_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs, void *args)
|
|
{
|
|
struct brcm_msi *msi = domain->host_data;
|
|
int hwirq, i;
|
|
|
|
hwirq = brcm_msi_alloc(msi, nr_irqs);
|
|
|
|
if (hwirq < 0)
|
|
return hwirq;
|
|
|
|
for (i = 0; i < nr_irqs; i++)
|
|
irq_domain_set_info(domain, virq + i, hwirq + i,
|
|
&brcm_msi_bottom_irq_chip, domain->host_data,
|
|
handle_edge_irq, NULL, NULL);
|
|
return 0;
|
|
}
|
|
|
|
static void brcm_irq_domain_free(struct irq_domain *domain,
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
{
|
|
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
|
|
struct brcm_msi *msi = irq_data_get_irq_chip_data(d);
|
|
|
|
brcm_msi_free(msi, d->hwirq, nr_irqs);
|
|
}
|
|
|
|
static const struct irq_domain_ops msi_domain_ops = {
|
|
.alloc = brcm_irq_domain_alloc,
|
|
.free = brcm_irq_domain_free,
|
|
};
|
|
|
|
static int brcm_allocate_domains(struct brcm_msi *msi)
|
|
{
|
|
struct fwnode_handle *fwnode = of_node_to_fwnode(msi->np);
|
|
struct device *dev = msi->dev;
|
|
|
|
msi->inner_domain = irq_domain_add_linear(NULL, msi->nr, &msi_domain_ops, msi);
|
|
if (!msi->inner_domain) {
|
|
dev_err(dev, "failed to create IRQ domain\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
msi->msi_domain = pci_msi_create_irq_domain(fwnode,
|
|
&brcm_msi_domain_info,
|
|
msi->inner_domain);
|
|
if (!msi->msi_domain) {
|
|
dev_err(dev, "failed to create MSI domain\n");
|
|
irq_domain_remove(msi->inner_domain);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void brcm_free_domains(struct brcm_msi *msi)
|
|
{
|
|
irq_domain_remove(msi->msi_domain);
|
|
irq_domain_remove(msi->inner_domain);
|
|
}
|
|
|
|
static void brcm_msi_remove(struct brcm_pcie *pcie)
|
|
{
|
|
struct brcm_msi *msi = pcie->msi;
|
|
|
|
if (!msi)
|
|
return;
|
|
irq_set_chained_handler_and_data(msi->irq, NULL, NULL);
|
|
brcm_free_domains(msi);
|
|
}
|
|
|
|
static void brcm_msi_set_regs(struct brcm_msi *msi)
|
|
{
|
|
u32 val = msi->legacy ? BRCM_INT_PCI_MSI_LEGACY_MASK :
|
|
BRCM_INT_PCI_MSI_MASK;
|
|
|
|
writel(val, msi->intr_base + MSI_INT_MASK_CLR);
|
|
writel(val, msi->intr_base + MSI_INT_CLR);
|
|
|
|
/*
|
|
* The 0 bit of PCIE_MISC_MSI_BAR_CONFIG_LO is repurposed to MSI
|
|
* enable, which we set to 1.
|
|
*/
|
|
writel(lower_32_bits(msi->target_addr) | 0x1,
|
|
msi->base + PCIE_MISC_MSI_BAR_CONFIG_LO);
|
|
writel(upper_32_bits(msi->target_addr),
|
|
msi->base + PCIE_MISC_MSI_BAR_CONFIG_HI);
|
|
|
|
val = msi->legacy ? PCIE_MISC_MSI_DATA_CONFIG_VAL_8 : PCIE_MISC_MSI_DATA_CONFIG_VAL_32;
|
|
writel(val, msi->base + PCIE_MISC_MSI_DATA_CONFIG);
|
|
}
|
|
|
|
static int brcm_pcie_enable_msi(struct brcm_pcie *pcie)
|
|
{
|
|
struct brcm_msi *msi;
|
|
int irq, ret;
|
|
struct device *dev = pcie->dev;
|
|
|
|
irq = irq_of_parse_and_map(dev->of_node, 1);
|
|
if (irq <= 0) {
|
|
dev_err(dev, "cannot map MSI interrupt\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
msi = devm_kzalloc(dev, sizeof(struct brcm_msi), GFP_KERNEL);
|
|
if (!msi)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&msi->lock);
|
|
msi->dev = dev;
|
|
msi->base = pcie->base;
|
|
msi->np = pcie->np;
|
|
msi->target_addr = pcie->msi_target_addr;
|
|
msi->irq = irq;
|
|
msi->legacy = pcie->hw_rev < BRCM_PCIE_HW_REV_33;
|
|
|
|
/*
|
|
* Sanity check to make sure that the 'used' bitmap in struct brcm_msi
|
|
* is large enough.
|
|
*/
|
|
BUILD_BUG_ON(BRCM_INT_PCI_MSI_LEGACY_NR > BRCM_INT_PCI_MSI_NR);
|
|
|
|
if (msi->legacy) {
|
|
msi->intr_base = msi->base + PCIE_INTR2_CPU_BASE;
|
|
msi->nr = BRCM_INT_PCI_MSI_LEGACY_NR;
|
|
msi->legacy_shift = 24;
|
|
} else {
|
|
msi->intr_base = msi->base + PCIE_MSI_INTR2_BASE;
|
|
msi->nr = BRCM_INT_PCI_MSI_NR;
|
|
msi->legacy_shift = 0;
|
|
}
|
|
|
|
ret = brcm_allocate_domains(msi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
irq_set_chained_handler_and_data(msi->irq, brcm_pcie_msi_isr, msi);
|
|
|
|
brcm_msi_set_regs(msi);
|
|
pcie->msi = msi;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The controller is capable of serving in both RC and EP roles */
|
|
static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
|
|
{
|
|
void __iomem *base = pcie->base;
|
|
u32 val = readl(base + PCIE_MISC_PCIE_STATUS);
|
|
|
|
return !!FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK, val);
|
|
}
|
|
|
|
static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
|
|
{
|
|
u32 val = readl(pcie->base + PCIE_MISC_PCIE_STATUS);
|
|
u32 dla = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK, val);
|
|
u32 plu = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK, val);
|
|
|
|
return dla && plu;
|
|
}
|
|
|
|
static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
|
|
unsigned int devfn, int where)
|
|
{
|
|
struct brcm_pcie *pcie = bus->sysdata;
|
|
void __iomem *base = pcie->base;
|
|
int idx;
|
|
|
|
/* Accesses to the RC go right to the RC registers if !devfn */
|
|
if (pci_is_root_bus(bus))
|
|
return devfn ? NULL : base + PCIE_ECAM_REG(where);
|
|
|
|
/* An access to our HW w/o link-up will cause a CPU Abort */
|
|
if (!brcm_pcie_link_up(pcie))
|
|
return NULL;
|
|
|
|
/* For devices, write to the config space index register */
|
|
idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
|
|
writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
|
|
return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
|
|
}
|
|
|
|
static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
|
|
unsigned int devfn, int where)
|
|
{
|
|
struct brcm_pcie *pcie = bus->sysdata;
|
|
void __iomem *base = pcie->base;
|
|
int idx;
|
|
|
|
/* Accesses to the RC go right to the RC registers if !devfn */
|
|
if (pci_is_root_bus(bus))
|
|
return devfn ? NULL : base + PCIE_ECAM_REG(where);
|
|
|
|
/* An access to our HW w/o link-up will cause a CPU Abort */
|
|
if (!brcm_pcie_link_up(pcie))
|
|
return NULL;
|
|
|
|
/* For devices, write to the config space index register */
|
|
idx = PCIE_ECAM_OFFSET(bus->number, devfn, where);
|
|
writel(idx, base + IDX_ADDR(pcie));
|
|
return base + DATA_ADDR(pcie);
|
|
}
|
|
|
|
static void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val)
|
|
{
|
|
u32 tmp, mask = RGR1_SW_INIT_1_INIT_GENERIC_MASK;
|
|
u32 shift = RGR1_SW_INIT_1_INIT_GENERIC_SHIFT;
|
|
|
|
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
tmp = (tmp & ~mask) | ((val << shift) & mask);
|
|
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
}
|
|
|
|
static void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val)
|
|
{
|
|
u32 tmp, mask = RGR1_SW_INIT_1_INIT_7278_MASK;
|
|
u32 shift = RGR1_SW_INIT_1_INIT_7278_SHIFT;
|
|
|
|
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
tmp = (tmp & ~mask) | ((val << shift) & mask);
|
|
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
}
|
|
|
|
static void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
|
|
{
|
|
if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n"))
|
|
return;
|
|
|
|
if (val)
|
|
reset_control_assert(pcie->perst_reset);
|
|
else
|
|
reset_control_deassert(pcie->perst_reset);
|
|
}
|
|
|
|
static void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Perst bit has moved and assert value is 0 */
|
|
tmp = readl(pcie->base + PCIE_MISC_PCIE_CTRL);
|
|
u32p_replace_bits(&tmp, !val, PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK);
|
|
writel(tmp, pcie->base + PCIE_MISC_PCIE_CTRL);
|
|
}
|
|
|
|
static void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = readl(pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
u32p_replace_bits(&tmp, val, PCIE_RGR1_SW_INIT_1_PERST_MASK);
|
|
writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
|
|
}
|
|
|
|
static int brcm_pcie_get_rc_bar2_size_and_offset(struct brcm_pcie *pcie,
|
|
u64 *rc_bar2_size,
|
|
u64 *rc_bar2_offset)
|
|
{
|
|
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
|
|
struct resource_entry *entry;
|
|
struct device *dev = pcie->dev;
|
|
u64 lowest_pcie_addr = ~(u64)0;
|
|
int ret, i = 0;
|
|
u64 size = 0;
|
|
|
|
resource_list_for_each_entry(entry, &bridge->dma_ranges) {
|
|
u64 pcie_beg = entry->res->start - entry->offset;
|
|
|
|
size += entry->res->end - entry->res->start + 1;
|
|
if (pcie_beg < lowest_pcie_addr)
|
|
lowest_pcie_addr = pcie_beg;
|
|
}
|
|
|
|
if (lowest_pcie_addr == ~(u64)0) {
|
|
dev_err(dev, "DT node has no dma-ranges\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
|
|
PCIE_BRCM_MAX_MEMC);
|
|
|
|
if (ret <= 0) {
|
|
/* Make an educated guess */
|
|
pcie->num_memc = 1;
|
|
pcie->memc_size[0] = 1ULL << fls64(size - 1);
|
|
} else {
|
|
pcie->num_memc = ret;
|
|
}
|
|
|
|
/* Each memc is viewed through a "port" that is a power of 2 */
|
|
for (i = 0, size = 0; i < pcie->num_memc; i++)
|
|
size += pcie->memc_size[i];
|
|
|
|
/* System memory starts at this address in PCIe-space */
|
|
*rc_bar2_offset = lowest_pcie_addr;
|
|
/* The sum of all memc views must also be a power of 2 */
|
|
*rc_bar2_size = 1ULL << fls64(size - 1);
|
|
|
|
/*
|
|
* We validate the inbound memory view even though we should trust
|
|
* whatever the device-tree provides. This is because of an HW issue on
|
|
* early Raspberry Pi 4's revisions (bcm2711). It turns out its
|
|
* firmware has to dynamically edit dma-ranges due to a bug on the
|
|
* PCIe controller integration, which prohibits any access above the
|
|
* lower 3GB of memory. Given this, we decided to keep the dma-ranges
|
|
* in check, avoiding hard to debug device-tree related issues in the
|
|
* future:
|
|
*
|
|
* The PCIe host controller by design must set the inbound viewport to
|
|
* be a contiguous arrangement of all of the system's memory. In
|
|
* addition, its size mut be a power of two. To further complicate
|
|
* matters, the viewport must start on a pcie-address that is aligned
|
|
* on a multiple of its size. If a portion of the viewport does not
|
|
* represent system memory -- e.g. 3GB of memory requires a 4GB
|
|
* viewport -- we can map the outbound memory in or after 3GB and even
|
|
* though the viewport will overlap the outbound memory the controller
|
|
* will know to send outbound memory downstream and everything else
|
|
* upstream.
|
|
*
|
|
* For example:
|
|
*
|
|
* - The best-case scenario, memory up to 3GB, is to place the inbound
|
|
* region in the first 4GB of pcie-space, as some legacy devices can
|
|
* only address 32bits. We would also like to put the MSI under 4GB
|
|
* as well, since some devices require a 32bit MSI target address.
|
|
*
|
|
* - If the system memory is 4GB or larger we cannot start the inbound
|
|
* region at location 0 (since we have to allow some space for
|
|
* outbound memory @ 3GB). So instead it will start at the 1x
|
|
* multiple of its size
|
|
*/
|
|
if (!*rc_bar2_size || (*rc_bar2_offset & (*rc_bar2_size - 1)) ||
|
|
(*rc_bar2_offset < SZ_4G && *rc_bar2_offset > SZ_2G)) {
|
|
dev_err(dev, "Invalid rc_bar2_offset/size: size 0x%llx, off 0x%llx\n",
|
|
*rc_bar2_size, *rc_bar2_offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_setup(struct brcm_pcie *pcie)
|
|
{
|
|
u64 rc_bar2_offset, rc_bar2_size;
|
|
void __iomem *base = pcie->base;
|
|
struct pci_host_bridge *bridge;
|
|
struct resource_entry *entry;
|
|
u32 tmp, burst, aspm_support;
|
|
int num_out_wins = 0;
|
|
int ret, memc;
|
|
|
|
/* Reset the bridge */
|
|
pcie->bridge_sw_init_set(pcie, 1);
|
|
usleep_range(100, 200);
|
|
|
|
/* Take the bridge out of reset */
|
|
pcie->bridge_sw_init_set(pcie, 0);
|
|
|
|
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
if (is_bmips(pcie))
|
|
tmp &= ~PCIE_BMIPS_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
|
|
else
|
|
tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK;
|
|
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
/* Wait for SerDes to be stable */
|
|
usleep_range(100, 200);
|
|
|
|
/*
|
|
* SCB_MAX_BURST_SIZE is a two bit field. For GENERIC chips it
|
|
* is encoded as 0=128, 1=256, 2=512, 3=Rsvd, for BCM7278 it
|
|
* is encoded as 0=Rsvd, 1=128, 2=256, 3=512.
|
|
*/
|
|
if (is_bmips(pcie))
|
|
burst = 0x1; /* 256 bytes */
|
|
else if (pcie->type == BCM2711)
|
|
burst = 0x0; /* 128 bytes */
|
|
else if (pcie->type == BCM7278)
|
|
burst = 0x3; /* 512 bytes */
|
|
else
|
|
burst = 0x2; /* 512 bytes */
|
|
|
|
/*
|
|
* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN,
|
|
* RCB_MPS_MODE, RCB_64B_MODE
|
|
*/
|
|
tmp = readl(base + PCIE_MISC_MISC_CTRL);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK);
|
|
u32p_replace_bits(&tmp, burst, PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_MPS_MODE_MASK);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_MISC_CTRL_PCIE_RCB_64B_MODE_MASK);
|
|
writel(tmp, base + PCIE_MISC_MISC_CTRL);
|
|
|
|
ret = brcm_pcie_get_rc_bar2_size_and_offset(pcie, &rc_bar2_size,
|
|
&rc_bar2_offset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tmp = lower_32_bits(rc_bar2_offset);
|
|
u32p_replace_bits(&tmp, brcm_pcie_encode_ibar_size(rc_bar2_size),
|
|
PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK);
|
|
writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
|
|
writel(upper_32_bits(rc_bar2_offset),
|
|
base + PCIE_MISC_RC_BAR2_CONFIG_HI);
|
|
|
|
tmp = readl(base + PCIE_MISC_MISC_CTRL);
|
|
for (memc = 0; memc < pcie->num_memc; memc++) {
|
|
u32 scb_size_val = ilog2(pcie->memc_size[memc]) - 15;
|
|
|
|
if (memc == 0)
|
|
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(0));
|
|
else if (memc == 1)
|
|
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(1));
|
|
else if (memc == 2)
|
|
u32p_replace_bits(&tmp, scb_size_val, SCB_SIZE_MASK(2));
|
|
}
|
|
writel(tmp, base + PCIE_MISC_MISC_CTRL);
|
|
|
|
/*
|
|
* We ideally want the MSI target address to be located in the 32bit
|
|
* addressable memory area. Some devices might depend on it. This is
|
|
* possible either when the inbound window is located above the lower
|
|
* 4GB or when the inbound area is smaller than 4GB (taking into
|
|
* account the rounding-up we're forced to perform).
|
|
*/
|
|
if (rc_bar2_offset >= SZ_4G || (rc_bar2_size + rc_bar2_offset) < SZ_4G)
|
|
pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_LT_4GB;
|
|
else
|
|
pcie->msi_target_addr = BRCM_MSI_TARGET_ADDR_GT_4GB;
|
|
|
|
if (!brcm_pcie_rc_mode(pcie)) {
|
|
dev_err(pcie->dev, "PCIe RC controller misconfigured as Endpoint\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* disable the PCIe->GISB memory window (RC_BAR1) */
|
|
tmp = readl(base + PCIE_MISC_RC_BAR1_CONFIG_LO);
|
|
tmp &= ~PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK;
|
|
writel(tmp, base + PCIE_MISC_RC_BAR1_CONFIG_LO);
|
|
|
|
/* disable the PCIe->SCB memory window (RC_BAR3) */
|
|
tmp = readl(base + PCIE_MISC_RC_BAR3_CONFIG_LO);
|
|
tmp &= ~PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK;
|
|
writel(tmp, base + PCIE_MISC_RC_BAR3_CONFIG_LO);
|
|
|
|
/* Don't advertise L0s capability if 'aspm-no-l0s' */
|
|
aspm_support = PCIE_LINK_STATE_L1;
|
|
if (!of_property_read_bool(pcie->np, "aspm-no-l0s"))
|
|
aspm_support |= PCIE_LINK_STATE_L0S;
|
|
tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
|
|
u32p_replace_bits(&tmp, aspm_support,
|
|
PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK);
|
|
writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY);
|
|
|
|
/*
|
|
* For config space accesses on the RC, show the right class for
|
|
* a PCIe-PCIe bridge (the default setting is to be EP mode).
|
|
*/
|
|
tmp = readl(base + PCIE_RC_CFG_PRIV1_ID_VAL3);
|
|
u32p_replace_bits(&tmp, 0x060400,
|
|
PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK);
|
|
writel(tmp, base + PCIE_RC_CFG_PRIV1_ID_VAL3);
|
|
|
|
bridge = pci_host_bridge_from_priv(pcie);
|
|
resource_list_for_each_entry(entry, &bridge->windows) {
|
|
struct resource *res = entry->res;
|
|
|
|
if (resource_type(res) != IORESOURCE_MEM)
|
|
continue;
|
|
|
|
if (num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
|
|
dev_err(pcie->dev, "too many outbound wins\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (is_bmips(pcie)) {
|
|
u64 start = res->start;
|
|
unsigned int j, nwins = resource_size(res) / SZ_128M;
|
|
|
|
/* bmips PCIe outbound windows have a 128MB max size */
|
|
if (nwins > BRCM_NUM_PCIE_OUT_WINS)
|
|
nwins = BRCM_NUM_PCIE_OUT_WINS;
|
|
for (j = 0; j < nwins; j++, start += SZ_128M)
|
|
brcm_pcie_set_outbound_win(pcie, j, start,
|
|
start - entry->offset,
|
|
SZ_128M);
|
|
break;
|
|
}
|
|
brcm_pcie_set_outbound_win(pcie, num_out_wins, res->start,
|
|
res->start - entry->offset,
|
|
resource_size(res));
|
|
num_out_wins++;
|
|
}
|
|
|
|
/* PCIe->SCB endian mode for BAR */
|
|
tmp = readl(base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
|
|
u32p_replace_bits(&tmp, PCIE_RC_CFG_VENDOR_SPCIFIC_REG1_LITTLE_ENDIAN,
|
|
PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK);
|
|
writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_start_link(struct brcm_pcie *pcie)
|
|
{
|
|
struct device *dev = pcie->dev;
|
|
void __iomem *base = pcie->base;
|
|
u16 nlw, cls, lnksta;
|
|
bool ssc_good = false;
|
|
u32 tmp;
|
|
int ret, i;
|
|
|
|
/* Unassert the fundamental reset */
|
|
pcie->perst_set(pcie, 0);
|
|
|
|
/*
|
|
* Wait for 100ms after PERST# deassertion; see PCIe CEM specification
|
|
* sections 2.2, PCIe r5.0, 6.6.1.
|
|
*/
|
|
msleep(100);
|
|
|
|
/*
|
|
* Give the RC/EP even more time to wake up, before trying to
|
|
* configure RC. Intermittently check status for link-up, up to a
|
|
* total of 100ms.
|
|
*/
|
|
for (i = 0; i < 100 && !brcm_pcie_link_up(pcie); i += 5)
|
|
msleep(5);
|
|
|
|
if (!brcm_pcie_link_up(pcie)) {
|
|
dev_err(dev, "link down\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (pcie->gen)
|
|
brcm_pcie_set_gen(pcie, pcie->gen);
|
|
|
|
if (pcie->ssc) {
|
|
ret = brcm_pcie_set_ssc(pcie);
|
|
if (ret == 0)
|
|
ssc_good = true;
|
|
else
|
|
dev_err(dev, "failed attempt to enter ssc mode\n");
|
|
}
|
|
|
|
lnksta = readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
|
|
cls = FIELD_GET(PCI_EXP_LNKSTA_CLS, lnksta);
|
|
nlw = FIELD_GET(PCI_EXP_LNKSTA_NLW, lnksta);
|
|
dev_info(dev, "link up, %s x%u %s\n",
|
|
pci_speed_string(pcie_link_speed[cls]), nlw,
|
|
ssc_good ? "(SSC)" : "(!SSC)");
|
|
|
|
/*
|
|
* Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
|
|
* is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
|
|
*/
|
|
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
|
|
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char * const supplies[] = {
|
|
"vpcie3v3",
|
|
"vpcie3v3aux",
|
|
"vpcie12v",
|
|
};
|
|
|
|
static void *alloc_subdev_regulators(struct device *dev)
|
|
{
|
|
const size_t size = sizeof(struct subdev_regulators) +
|
|
sizeof(struct regulator_bulk_data) * ARRAY_SIZE(supplies);
|
|
struct subdev_regulators *sr;
|
|
int i;
|
|
|
|
sr = devm_kzalloc(dev, size, GFP_KERNEL);
|
|
if (sr) {
|
|
sr->num_supplies = ARRAY_SIZE(supplies);
|
|
for (i = 0; i < ARRAY_SIZE(supplies); i++)
|
|
sr->supplies[i].supply = supplies[i];
|
|
}
|
|
|
|
return sr;
|
|
}
|
|
|
|
static int brcm_pcie_add_bus(struct pci_bus *bus)
|
|
{
|
|
struct brcm_pcie *pcie = bus->sysdata;
|
|
struct device *dev = &bus->dev;
|
|
struct subdev_regulators *sr;
|
|
int ret;
|
|
|
|
if (!bus->parent || !pci_is_root_bus(bus->parent))
|
|
return 0;
|
|
|
|
if (dev->of_node) {
|
|
sr = alloc_subdev_regulators(dev);
|
|
if (!sr) {
|
|
dev_info(dev, "Can't allocate regulators for downstream device\n");
|
|
goto no_regulators;
|
|
}
|
|
|
|
pcie->sr = sr;
|
|
|
|
ret = regulator_bulk_get(dev, sr->num_supplies, sr->supplies);
|
|
if (ret) {
|
|
dev_info(dev, "No regulators for downstream device\n");
|
|
goto no_regulators;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(sr->num_supplies, sr->supplies);
|
|
if (ret) {
|
|
dev_err(dev, "Can't enable regulators for downstream device\n");
|
|
regulator_bulk_free(sr->num_supplies, sr->supplies);
|
|
pcie->sr = NULL;
|
|
}
|
|
}
|
|
|
|
no_regulators:
|
|
brcm_pcie_start_link(pcie);
|
|
return 0;
|
|
}
|
|
|
|
static void brcm_pcie_remove_bus(struct pci_bus *bus)
|
|
{
|
|
struct brcm_pcie *pcie = bus->sysdata;
|
|
struct subdev_regulators *sr = pcie->sr;
|
|
struct device *dev = &bus->dev;
|
|
|
|
if (!sr)
|
|
return;
|
|
|
|
if (regulator_bulk_disable(sr->num_supplies, sr->supplies))
|
|
dev_err(dev, "Failed to disable regulators for downstream device\n");
|
|
regulator_bulk_free(sr->num_supplies, sr->supplies);
|
|
pcie->sr = NULL;
|
|
}
|
|
|
|
/* L23 is a low-power PCIe link state */
|
|
static void brcm_pcie_enter_l23(struct brcm_pcie *pcie)
|
|
{
|
|
void __iomem *base = pcie->base;
|
|
int l23, i;
|
|
u32 tmp;
|
|
|
|
/* Assert request for L23 */
|
|
tmp = readl(base + PCIE_MISC_PCIE_CTRL);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
|
|
writel(tmp, base + PCIE_MISC_PCIE_CTRL);
|
|
|
|
/* Wait up to 36 msec for L23 */
|
|
tmp = readl(base + PCIE_MISC_PCIE_STATUS);
|
|
l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK, tmp);
|
|
for (i = 0; i < 15 && !l23; i++) {
|
|
usleep_range(2000, 2400);
|
|
tmp = readl(base + PCIE_MISC_PCIE_STATUS);
|
|
l23 = FIELD_GET(PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK,
|
|
tmp);
|
|
}
|
|
|
|
if (!l23)
|
|
dev_err(pcie->dev, "failed to enter low-power link state\n");
|
|
}
|
|
|
|
static int brcm_phy_cntl(struct brcm_pcie *pcie, const int start)
|
|
{
|
|
static const u32 shifts[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_SHIFT,
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_SHIFT,
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_SHIFT,};
|
|
static const u32 masks[PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS] = {
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_PWRDN_MASK,
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_RESET_MASK,
|
|
PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_DIG_RESET_MASK,};
|
|
const int beg = start ? 0 : PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS - 1;
|
|
const int end = start ? PCIE_DVT_PMU_PCIE_PHY_CTRL_DAST_NFLDS : -1;
|
|
u32 tmp, combined_mask = 0;
|
|
u32 val;
|
|
void __iomem *base = pcie->base;
|
|
int i, ret;
|
|
|
|
for (i = beg; i != end; start ? i++ : i--) {
|
|
val = start ? BIT_MASK(shifts[i]) : 0;
|
|
tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
|
|
tmp = (tmp & ~masks[i]) | (val & masks[i]);
|
|
writel(tmp, base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
|
|
usleep_range(50, 200);
|
|
combined_mask |= masks[i];
|
|
}
|
|
|
|
tmp = readl(base + PCIE_DVT_PMU_PCIE_PHY_CTRL);
|
|
val = start ? combined_mask : 0;
|
|
|
|
ret = (tmp & combined_mask) == val ? 0 : -EIO;
|
|
if (ret)
|
|
dev_err(pcie->dev, "failed to %s phy\n", (start ? "start" : "stop"));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int brcm_phy_start(struct brcm_pcie *pcie)
|
|
{
|
|
return pcie->rescal ? brcm_phy_cntl(pcie, 1) : 0;
|
|
}
|
|
|
|
static inline int brcm_phy_stop(struct brcm_pcie *pcie)
|
|
{
|
|
return pcie->rescal ? brcm_phy_cntl(pcie, 0) : 0;
|
|
}
|
|
|
|
static void brcm_pcie_turn_off(struct brcm_pcie *pcie)
|
|
{
|
|
void __iomem *base = pcie->base;
|
|
int tmp;
|
|
|
|
if (brcm_pcie_link_up(pcie))
|
|
brcm_pcie_enter_l23(pcie);
|
|
/* Assert fundamental reset */
|
|
pcie->perst_set(pcie, 1);
|
|
|
|
/* Deassert request for L23 in case it was asserted */
|
|
tmp = readl(base + PCIE_MISC_PCIE_CTRL);
|
|
u32p_replace_bits(&tmp, 0, PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK);
|
|
writel(tmp, base + PCIE_MISC_PCIE_CTRL);
|
|
|
|
/* Turn off SerDes */
|
|
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
u32p_replace_bits(&tmp, 1, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
|
|
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
|
|
/* Shutdown PCIe bridge */
|
|
pcie->bridge_sw_init_set(pcie, 1);
|
|
}
|
|
|
|
static int pci_dev_may_wakeup(struct pci_dev *dev, void *data)
|
|
{
|
|
bool *ret = data;
|
|
|
|
if (device_may_wakeup(&dev->dev)) {
|
|
*ret = true;
|
|
dev_info(&dev->dev, "Possible wake-up device; regulators will not be disabled\n");
|
|
}
|
|
return (int) *ret;
|
|
}
|
|
|
|
static int brcm_pcie_suspend_noirq(struct device *dev)
|
|
{
|
|
struct brcm_pcie *pcie = dev_get_drvdata(dev);
|
|
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
|
|
int ret;
|
|
|
|
brcm_pcie_turn_off(pcie);
|
|
/*
|
|
* If brcm_phy_stop() returns an error, just dev_err(). If we
|
|
* return the error it will cause the suspend to fail and this is a
|
|
* forgivable offense that will probably be erased on resume.
|
|
*/
|
|
if (brcm_phy_stop(pcie))
|
|
dev_err(dev, "Could not stop phy for suspend\n");
|
|
|
|
ret = reset_control_rearm(pcie->rescal);
|
|
if (ret) {
|
|
dev_err(dev, "Could not rearm rescal reset\n");
|
|
return ret;
|
|
}
|
|
|
|
if (pcie->sr) {
|
|
/*
|
|
* Now turn off the regulators, but if at least one
|
|
* downstream device is enabled as a wake-up source, do not
|
|
* turn off regulators.
|
|
*/
|
|
pcie->ep_wakeup_capable = false;
|
|
pci_walk_bus(bridge->bus, pci_dev_may_wakeup,
|
|
&pcie->ep_wakeup_capable);
|
|
if (!pcie->ep_wakeup_capable) {
|
|
ret = regulator_bulk_disable(pcie->sr->num_supplies,
|
|
pcie->sr->supplies);
|
|
if (ret) {
|
|
dev_err(dev, "Could not turn off regulators\n");
|
|
reset_control_reset(pcie->rescal);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
clk_disable_unprepare(pcie->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_pcie_resume_noirq(struct device *dev)
|
|
{
|
|
struct brcm_pcie *pcie = dev_get_drvdata(dev);
|
|
void __iomem *base;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
base = pcie->base;
|
|
ret = clk_prepare_enable(pcie->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_control_reset(pcie->rescal);
|
|
if (ret)
|
|
goto err_disable_clk;
|
|
|
|
ret = brcm_phy_start(pcie);
|
|
if (ret)
|
|
goto err_reset;
|
|
|
|
/* Take bridge out of reset so we can access the SERDES reg */
|
|
pcie->bridge_sw_init_set(pcie, 0);
|
|
|
|
/* SERDES_IDDQ = 0 */
|
|
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
u32p_replace_bits(&tmp, 0, PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
|
|
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
|
|
/* wait for serdes to be stable */
|
|
udelay(100);
|
|
|
|
ret = brcm_pcie_setup(pcie);
|
|
if (ret)
|
|
goto err_reset;
|
|
|
|
if (pcie->sr) {
|
|
if (pcie->ep_wakeup_capable) {
|
|
/*
|
|
* We are resuming from a suspend. In the suspend we
|
|
* did not disable the power supplies, so there is
|
|
* no need to enable them (and falsely increase their
|
|
* usage count).
|
|
*/
|
|
pcie->ep_wakeup_capable = false;
|
|
} else {
|
|
ret = regulator_bulk_enable(pcie->sr->num_supplies,
|
|
pcie->sr->supplies);
|
|
if (ret) {
|
|
dev_err(dev, "Could not turn on regulators\n");
|
|
goto err_reset;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = brcm_pcie_start_link(pcie);
|
|
if (ret)
|
|
goto err_regulator;
|
|
|
|
if (pcie->msi)
|
|
brcm_msi_set_regs(pcie->msi);
|
|
|
|
return 0;
|
|
|
|
err_regulator:
|
|
if (pcie->sr)
|
|
regulator_bulk_disable(pcie->sr->num_supplies, pcie->sr->supplies);
|
|
err_reset:
|
|
reset_control_rearm(pcie->rescal);
|
|
err_disable_clk:
|
|
clk_disable_unprepare(pcie->clk);
|
|
return ret;
|
|
}
|
|
|
|
static void __brcm_pcie_remove(struct brcm_pcie *pcie)
|
|
{
|
|
brcm_msi_remove(pcie);
|
|
brcm_pcie_turn_off(pcie);
|
|
if (brcm_phy_stop(pcie))
|
|
dev_err(pcie->dev, "Could not stop phy\n");
|
|
if (reset_control_rearm(pcie->rescal))
|
|
dev_err(pcie->dev, "Could not rearm rescal reset\n");
|
|
clk_disable_unprepare(pcie->clk);
|
|
}
|
|
|
|
static int brcm_pcie_remove(struct platform_device *pdev)
|
|
{
|
|
struct brcm_pcie *pcie = platform_get_drvdata(pdev);
|
|
struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
|
|
|
|
pci_stop_root_bus(bridge->bus);
|
|
pci_remove_root_bus(bridge->bus);
|
|
__brcm_pcie_remove(pcie);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const int pcie_offsets[] = {
|
|
[RGR1_SW_INIT_1] = 0x9210,
|
|
[EXT_CFG_INDEX] = 0x9000,
|
|
[EXT_CFG_DATA] = 0x9004,
|
|
};
|
|
|
|
static const int pcie_offsets_bmips_7425[] = {
|
|
[RGR1_SW_INIT_1] = 0x8010,
|
|
[EXT_CFG_INDEX] = 0x8300,
|
|
[EXT_CFG_DATA] = 0x8304,
|
|
};
|
|
|
|
static const struct pcie_cfg_data generic_cfg = {
|
|
.offsets = pcie_offsets,
|
|
.type = GENERIC,
|
|
.perst_set = brcm_pcie_perst_set_generic,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
|
|
};
|
|
|
|
static const struct pcie_cfg_data bcm7425_cfg = {
|
|
.offsets = pcie_offsets_bmips_7425,
|
|
.type = BCM7425,
|
|
.perst_set = brcm_pcie_perst_set_generic,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
|
|
};
|
|
|
|
static const struct pcie_cfg_data bcm7435_cfg = {
|
|
.offsets = pcie_offsets,
|
|
.type = BCM7435,
|
|
.perst_set = brcm_pcie_perst_set_generic,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
|
|
};
|
|
|
|
static const struct pcie_cfg_data bcm4908_cfg = {
|
|
.offsets = pcie_offsets,
|
|
.type = BCM4908,
|
|
.perst_set = brcm_pcie_perst_set_4908,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
|
|
};
|
|
|
|
static const int pcie_offset_bcm7278[] = {
|
|
[RGR1_SW_INIT_1] = 0xc010,
|
|
[EXT_CFG_INDEX] = 0x9000,
|
|
[EXT_CFG_DATA] = 0x9004,
|
|
};
|
|
|
|
static const struct pcie_cfg_data bcm7278_cfg = {
|
|
.offsets = pcie_offset_bcm7278,
|
|
.type = BCM7278,
|
|
.perst_set = brcm_pcie_perst_set_7278,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
|
|
};
|
|
|
|
static const struct pcie_cfg_data bcm2711_cfg = {
|
|
.offsets = pcie_offsets,
|
|
.type = BCM2711,
|
|
.perst_set = brcm_pcie_perst_set_generic,
|
|
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
|
|
};
|
|
|
|
static const struct of_device_id brcm_pcie_match[] = {
|
|
{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
|
|
{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
|
|
{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
|
|
{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
|
|
{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
|
|
{ .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
|
|
{ .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
|
|
{ .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
|
|
{},
|
|
};
|
|
|
|
static struct pci_ops brcm_pcie_ops = {
|
|
.map_bus = brcm_pcie_map_bus,
|
|
.read = pci_generic_config_read,
|
|
.write = pci_generic_config_write,
|
|
.add_bus = brcm_pcie_add_bus,
|
|
.remove_bus = brcm_pcie_remove_bus,
|
|
};
|
|
|
|
static struct pci_ops brcm7425_pcie_ops = {
|
|
.map_bus = brcm7425_pcie_map_bus,
|
|
.read = pci_generic_config_read32,
|
|
.write = pci_generic_config_write32,
|
|
.add_bus = brcm_pcie_add_bus,
|
|
.remove_bus = brcm_pcie_remove_bus,
|
|
};
|
|
|
|
static int brcm_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node, *msi_np;
|
|
struct pci_host_bridge *bridge;
|
|
const struct pcie_cfg_data *data;
|
|
struct brcm_pcie *pcie;
|
|
int ret;
|
|
|
|
bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
if (!data) {
|
|
pr_err("failed to look up compatible string\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pcie = pci_host_bridge_priv(bridge);
|
|
pcie->dev = &pdev->dev;
|
|
pcie->np = np;
|
|
pcie->reg_offsets = data->offsets;
|
|
pcie->type = data->type;
|
|
pcie->perst_set = data->perst_set;
|
|
pcie->bridge_sw_init_set = data->bridge_sw_init_set;
|
|
|
|
pcie->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pcie->base))
|
|
return PTR_ERR(pcie->base);
|
|
|
|
pcie->clk = devm_clk_get_optional(&pdev->dev, "sw_pcie");
|
|
if (IS_ERR(pcie->clk))
|
|
return PTR_ERR(pcie->clk);
|
|
|
|
ret = of_pci_get_max_link_speed(np);
|
|
pcie->gen = (ret < 0) ? 0 : ret;
|
|
|
|
pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
|
|
|
|
ret = clk_prepare_enable(pcie->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not enable clock\n");
|
|
return ret;
|
|
}
|
|
pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
|
|
if (IS_ERR(pcie->rescal)) {
|
|
clk_disable_unprepare(pcie->clk);
|
|
return PTR_ERR(pcie->rescal);
|
|
}
|
|
pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
|
|
if (IS_ERR(pcie->perst_reset)) {
|
|
clk_disable_unprepare(pcie->clk);
|
|
return PTR_ERR(pcie->perst_reset);
|
|
}
|
|
|
|
ret = reset_control_reset(pcie->rescal);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
|
|
|
|
ret = brcm_phy_start(pcie);
|
|
if (ret) {
|
|
reset_control_rearm(pcie->rescal);
|
|
clk_disable_unprepare(pcie->clk);
|
|
return ret;
|
|
}
|
|
|
|
ret = brcm_pcie_setup(pcie);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
|
|
if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
|
|
dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
|
|
ret = -ENODEV;
|
|
goto fail;
|
|
}
|
|
|
|
msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
|
|
if (pci_msi_enabled() && msi_np == pcie->np) {
|
|
ret = brcm_pcie_enable_msi(pcie);
|
|
if (ret) {
|
|
dev_err(pcie->dev, "probe of internal MSI failed");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
|
|
bridge->sysdata = pcie;
|
|
|
|
platform_set_drvdata(pdev, pcie);
|
|
|
|
ret = pci_host_probe(bridge);
|
|
if (!ret && !brcm_pcie_link_up(pcie))
|
|
ret = -ENODEV;
|
|
|
|
if (ret) {
|
|
brcm_pcie_remove(pdev);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
__brcm_pcie_remove(pcie);
|
|
return ret;
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(of, brcm_pcie_match);
|
|
|
|
static const struct dev_pm_ops brcm_pcie_pm_ops = {
|
|
.suspend_noirq = brcm_pcie_suspend_noirq,
|
|
.resume_noirq = brcm_pcie_resume_noirq,
|
|
};
|
|
|
|
static struct platform_driver brcm_pcie_driver = {
|
|
.probe = brcm_pcie_probe,
|
|
.remove = brcm_pcie_remove,
|
|
.driver = {
|
|
.name = "brcm-pcie",
|
|
.of_match_table = brcm_pcie_match,
|
|
.pm = &brcm_pcie_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(brcm_pcie_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Broadcom STB PCIe RC driver");
|
|
MODULE_AUTHOR("Broadcom");
|