266 lines
6.3 KiB
C
266 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* AL3320A - Dyna Image Ambient Light Sensor
|
|
*
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*
|
|
* IIO driver for AL3320A (7-bit I2C slave address 0x1C).
|
|
*
|
|
* TODO: interrupt support, thresholds
|
|
* When the driver will get support for interrupt handling, then interrupt
|
|
* will need to be disabled before turning sensor OFF in order to avoid
|
|
* potential races with the interrupt handling.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define AL3320A_DRV_NAME "al3320a"
|
|
|
|
#define AL3320A_REG_CONFIG 0x00
|
|
#define AL3320A_REG_STATUS 0x01
|
|
#define AL3320A_REG_INT 0x02
|
|
#define AL3320A_REG_WAIT 0x06
|
|
#define AL3320A_REG_CONFIG_RANGE 0x07
|
|
#define AL3320A_REG_PERSIST 0x08
|
|
#define AL3320A_REG_MEAN_TIME 0x09
|
|
#define AL3320A_REG_ADUMMY 0x0A
|
|
#define AL3320A_REG_DATA_LOW 0x22
|
|
|
|
#define AL3320A_REG_LOW_THRESH_LOW 0x30
|
|
#define AL3320A_REG_LOW_THRESH_HIGH 0x31
|
|
#define AL3320A_REG_HIGH_THRESH_LOW 0x32
|
|
#define AL3320A_REG_HIGH_THRESH_HIGH 0x33
|
|
|
|
#define AL3320A_CONFIG_DISABLE 0x00
|
|
#define AL3320A_CONFIG_ENABLE 0x01
|
|
|
|
#define AL3320A_GAIN_MASK GENMASK(2, 1)
|
|
|
|
/* chip params default values */
|
|
#define AL3320A_DEFAULT_MEAN_TIME 4
|
|
#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */
|
|
|
|
#define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"
|
|
|
|
enum al3320a_range {
|
|
AL3320A_RANGE_1, /* 33.28 Klx */
|
|
AL3320A_RANGE_2, /* 8.32 Klx */
|
|
AL3320A_RANGE_3, /* 2.08 Klx */
|
|
AL3320A_RANGE_4 /* 0.65 Klx */
|
|
};
|
|
|
|
static const int al3320a_scales[][2] = {
|
|
{0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
|
|
};
|
|
|
|
struct al3320a_data {
|
|
struct i2c_client *client;
|
|
};
|
|
|
|
static const struct iio_chan_spec al3320a_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
}
|
|
};
|
|
|
|
static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
|
|
|
|
static struct attribute *al3320a_attributes[] = {
|
|
&iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group al3320a_attribute_group = {
|
|
.attrs = al3320a_attributes,
|
|
};
|
|
|
|
static int al3320a_set_pwr(struct i2c_client *client, bool pwr)
|
|
{
|
|
u8 val = pwr ? AL3320A_CONFIG_ENABLE : AL3320A_CONFIG_DISABLE;
|
|
return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG, val);
|
|
}
|
|
|
|
static void al3320a_set_pwr_off(void *_data)
|
|
{
|
|
struct al3320a_data *data = _data;
|
|
|
|
al3320a_set_pwr(data->client, false);
|
|
}
|
|
|
|
static int al3320a_init(struct al3320a_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = al3320a_set_pwr(data->client, true);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
|
|
FIELD_PREP(AL3320A_GAIN_MASK,
|
|
AL3320A_RANGE_3));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
|
|
AL3320A_DEFAULT_MEAN_TIME);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
|
|
AL3320A_DEFAULT_WAIT_TIME);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int al3320a_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct al3320a_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/*
|
|
* ALS ADC value is stored in two adjacent registers:
|
|
* - low byte of output is stored at AL3320A_REG_DATA_LOW
|
|
* - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
|
|
*/
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
AL3320A_REG_DATA_LOW);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
AL3320A_REG_CONFIG_RANGE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = FIELD_GET(AL3320A_GAIN_MASK, ret);
|
|
*val = al3320a_scales[ret][0];
|
|
*val2 = al3320a_scales[ret][1];
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int al3320a_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val,
|
|
int val2, long mask)
|
|
{
|
|
struct al3320a_data *data = iio_priv(indio_dev);
|
|
int i;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
|
|
if (val != al3320a_scales[i][0] ||
|
|
val2 != al3320a_scales[i][1])
|
|
continue;
|
|
|
|
return i2c_smbus_write_byte_data(data->client,
|
|
AL3320A_REG_CONFIG_RANGE,
|
|
FIELD_PREP(AL3320A_GAIN_MASK, i));
|
|
}
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info al3320a_info = {
|
|
.read_raw = al3320a_read_raw,
|
|
.write_raw = al3320a_write_raw,
|
|
.attrs = &al3320a_attribute_group,
|
|
};
|
|
|
|
static int al3320a_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct al3320a_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->info = &al3320a_info;
|
|
indio_dev->name = AL3320A_DRV_NAME;
|
|
indio_dev->channels = al3320a_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = al3320a_init(data);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "al3320a chip init failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(&client->dev,
|
|
al3320a_set_pwr_off,
|
|
data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static int al3320a_suspend(struct device *dev)
|
|
{
|
|
return al3320a_set_pwr(to_i2c_client(dev), false);
|
|
}
|
|
|
|
static int al3320a_resume(struct device *dev)
|
|
{
|
|
return al3320a_set_pwr(to_i2c_client(dev), true);
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(al3320a_pm_ops, al3320a_suspend,
|
|
al3320a_resume);
|
|
|
|
static const struct i2c_device_id al3320a_id[] = {
|
|
{"al3320a", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, al3320a_id);
|
|
|
|
static const struct of_device_id al3320a_of_match[] = {
|
|
{ .compatible = "dynaimage,al3320a", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, al3320a_of_match);
|
|
|
|
static struct i2c_driver al3320a_driver = {
|
|
.driver = {
|
|
.name = AL3320A_DRV_NAME,
|
|
.of_match_table = al3320a_of_match,
|
|
.pm = pm_sleep_ptr(&al3320a_pm_ops),
|
|
},
|
|
.probe = al3320a_probe,
|
|
.id_table = al3320a_id,
|
|
};
|
|
|
|
module_i2c_driver(al3320a_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
|
|
MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|