UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k/main.c

2122 lines
53 KiB
C
Raw Blame History

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/nl80211.h>
#include "ath9k.h"
#include "btcoex.h"
static u8 parse_mpdudensity(u8 mpdudensity)
{
/*
* 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
* 0 for no restriction
* 1 for 1/4 us
* 2 for 1/2 us
* 3 for 1 us
* 4 for 2 us
* 5 for 4 us
* 6 for 8 us
* 7 for 16 us
*/
switch (mpdudensity) {
case 0:
return 0;
case 1:
case 2:
case 3:
/* Our lower layer calculations limit our precision to
1 microsecond */
return 1;
case 4:
return 2;
case 5:
return 4;
case 6:
return 8;
case 7:
return 16;
default:
return 0;
}
}
bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
{
unsigned long flags;
bool ret;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
ret = ath9k_hw_setpower(sc->sc_ah, mode);
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
return ret;
}
void ath9k_ps_wakeup(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
enum ath9k_power_mode power_mode;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (++sc->ps_usecount != 1)
goto unlock;
power_mode = sc->sc_ah->power_mode;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
/*
* While the hardware is asleep, the cycle counters contain no
* useful data. Better clear them now so that they don't mess up
* survey data results.
*/
if (power_mode != ATH9K_PM_AWAKE) {
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
memset(&common->cc_survey, 0, sizeof(common->cc_survey));
spin_unlock(&common->cc_lock);
}
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
void ath9k_ps_restore(struct ath_softc *sc)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (--sc->ps_usecount != 0)
goto unlock;
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
spin_unlock(&common->cc_lock);
if (sc->ps_idle)
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK)))
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
unlock:
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
static void ath_start_ani(struct ath_common *common)
{
struct ath_hw *ah = common->ah;
unsigned long timestamp = jiffies_to_msecs(jiffies);
struct ath_softc *sc = (struct ath_softc *) common->priv;
if (!(sc->sc_flags & SC_OP_ANI_RUN))
return;
if (sc->sc_flags & SC_OP_OFFCHANNEL)
return;
common->ani.longcal_timer = timestamp;
common->ani.shortcal_timer = timestamp;
common->ani.checkani_timer = timestamp;
mod_timer(&common->ani.timer,
jiffies +
msecs_to_jiffies((u32)ah->config.ani_poll_interval));
}
static void ath_update_survey_nf(struct ath_softc *sc, int channel)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_channel *chan = &ah->channels[channel];
struct survey_info *survey = &sc->survey[channel];
if (chan->noisefloor) {
survey->filled |= SURVEY_INFO_NOISE_DBM;
survey->noise = chan->noisefloor;
}
}
static void ath_update_survey_stats(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
int pos = ah->curchan - &ah->channels[0];
struct survey_info *survey = &sc->survey[pos];
struct ath_cycle_counters *cc = &common->cc_survey;
unsigned int div = common->clockrate * 1000;
if (!ah->curchan)
return;
if (ah->power_mode == ATH9K_PM_AWAKE)
ath_hw_cycle_counters_update(common);
if (cc->cycles > 0) {
survey->filled |= SURVEY_INFO_CHANNEL_TIME |
SURVEY_INFO_CHANNEL_TIME_BUSY |
SURVEY_INFO_CHANNEL_TIME_RX |
SURVEY_INFO_CHANNEL_TIME_TX;
survey->channel_time += cc->cycles / div;
survey->channel_time_busy += cc->rx_busy / div;
survey->channel_time_rx += cc->rx_frame / div;
survey->channel_time_tx += cc->tx_frame / div;
}
memset(cc, 0, sizeof(*cc));
ath_update_survey_nf(sc, pos);
}
/*
* Set/change channels. If the channel is really being changed, it's done
* by reseting the chip. To accomplish this we must first cleanup any pending
* DMA, then restart stuff.
*/
int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *hchan)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
bool fastcc = true, stopped;
struct ieee80211_channel *channel = hw->conf.channel;
struct ath9k_hw_cal_data *caldata = NULL;
int r;
if (sc->sc_flags & SC_OP_INVALID)
return -EIO;
del_timer_sync(&common->ani.timer);
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
/*
* This is only performed if the channel settings have
* actually changed.
*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
ath9k_hw_disable_interrupts(ah);
stopped = ath_drain_all_txq(sc, false);
if (!ath_stoprecv(sc))
stopped = false;
if (!ath9k_hw_check_alive(ah))
stopped = false;
/* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
* changing channel. */
if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
fastcc = false;
if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
caldata = &sc->caldata;
ath_dbg(common, ATH_DBG_CONFIG,
"(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
sc->sc_ah->curchan->channel,
channel->center_freq, conf_is_ht40(conf),
fastcc);
r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
if (r) {
ath_err(common,
"Unable to reset channel (%u MHz), reset status %d\n",
channel->center_freq, r);
goto ps_restore;
}
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to restart recv logic\n");
r = -EIO;
goto ps_restore;
}
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
ath9k_hw_set_interrupts(ah, ah->imask);
if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
if (sc->sc_flags & SC_OP_BEACONS)
ath_beacon_config(sc, NULL);
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, HZ/2);
ath_start_ani(common);
}
ps_restore:
ieee80211_wake_queues(hw);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
return r;
}
static void ath_paprd_activate(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath9k_hw_cal_data *caldata = ah->caldata;
struct ath_common *common = ath9k_hw_common(ah);
int chain;
if (!caldata || !caldata->paprd_done)
return;
ath9k_ps_wakeup(sc);
ar9003_paprd_enable(ah, false);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
if (!(common->tx_chainmask & BIT(chain)))
continue;
ar9003_paprd_populate_single_table(ah, caldata, chain);
}
ar9003_paprd_enable(ah, true);
ath9k_ps_restore(sc);
}
static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain)
{
struct ieee80211_hw *hw = sc->hw;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_tx_control txctl;
int time_left;
memset(&txctl, 0, sizeof(txctl));
txctl.txq = sc->tx.txq_map[WME_AC_BE];
memset(tx_info, 0, sizeof(*tx_info));
tx_info->band = hw->conf.channel->band;
tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
tx_info->control.rates[0].idx = 0;
tx_info->control.rates[0].count = 1;
tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
tx_info->control.rates[1].idx = -1;
init_completion(&sc->paprd_complete);
sc->paprd_pending = true;
txctl.paprd = BIT(chain);
if (ath_tx_start(hw, skb, &txctl) != 0) {
ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n");
dev_kfree_skb_any(skb);
return false;
}
time_left = wait_for_completion_timeout(&sc->paprd_complete,
msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
sc->paprd_pending = false;
if (!time_left)
ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
"Timeout waiting for paprd training on TX chain %d\n",
chain);
return !!time_left;
}
void ath_paprd_calibrate(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
struct ieee80211_hw *hw = sc->hw;
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_hdr *hdr;
struct sk_buff *skb = NULL;
struct ath9k_hw_cal_data *caldata = ah->caldata;
struct ath_common *common = ath9k_hw_common(ah);
int ftype;
int chain_ok = 0;
int chain;
int len = 1800;
if (!caldata)
return;
if (ar9003_paprd_init_table(ah) < 0)
return;
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
return;
skb_put(skb, len);
memset(skb->data, 0, len);
hdr = (struct ieee80211_hdr *)skb->data;
ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
hdr->frame_control = cpu_to_le16(ftype);
hdr->duration_id = cpu_to_le16(10);
memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
ath9k_ps_wakeup(sc);
for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
if (!(common->tx_chainmask & BIT(chain)))
continue;
chain_ok = 0;
ath_dbg(common, ATH_DBG_CALIBRATE,
"Sending PAPRD frame for thermal measurement "
"on chain %d\n", chain);
if (!ath_paprd_send_frame(sc, skb, chain))
goto fail_paprd;
ar9003_paprd_setup_gain_table(ah, chain);
ath_dbg(common, ATH_DBG_CALIBRATE,
"Sending PAPRD training frame on chain %d\n", chain);
if (!ath_paprd_send_frame(sc, skb, chain))
goto fail_paprd;
if (!ar9003_paprd_is_done(ah))
break;
if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
break;
chain_ok = 1;
}
kfree_skb(skb);
if (chain_ok) {
caldata->paprd_done = true;
ath_paprd_activate(sc);
}
fail_paprd:
ath9k_ps_restore(sc);
}
/*
* This routine performs the periodic noise floor calibration function
* that is used to adjust and optimize the chip performance. This
* takes environmental changes (location, temperature) into account.
* When the task is complete, it reschedules itself depending on the
* appropriate interval that was calculated.
*/
void ath_ani_calibrate(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool longcal = false;
bool shortcal = false;
bool aniflag = false;
unsigned int timestamp = jiffies_to_msecs(jiffies);
u32 cal_interval, short_cal_interval, long_cal_interval;
unsigned long flags;
if (ah->caldata && ah->caldata->nfcal_interference)
long_cal_interval = ATH_LONG_CALINTERVAL_INT;
else
long_cal_interval = ATH_LONG_CALINTERVAL;
short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
/* Only calibrate if awake */
if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
goto set_timer;
ath9k_ps_wakeup(sc);
/* Long calibration runs independently of short calibration. */
if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
longcal = true;
ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
common->ani.longcal_timer = timestamp;
}
/* Short calibration applies only while caldone is false */
if (!common->ani.caldone) {
if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
shortcal = true;
ath_dbg(common, ATH_DBG_ANI,
"shortcal @%lu\n", jiffies);
common->ani.shortcal_timer = timestamp;
common->ani.resetcal_timer = timestamp;
}
} else {
if ((timestamp - common->ani.resetcal_timer) >=
ATH_RESTART_CALINTERVAL) {
common->ani.caldone = ath9k_hw_reset_calvalid(ah);
if (common->ani.caldone)
common->ani.resetcal_timer = timestamp;
}
}
/* Verify whether we must check ANI */
if ((timestamp - common->ani.checkani_timer) >=
ah->config.ani_poll_interval) {
aniflag = true;
common->ani.checkani_timer = timestamp;
}
/* Skip all processing if there's nothing to do. */
if (longcal || shortcal || aniflag) {
/* Call ANI routine if necessary */
if (aniflag) {
spin_lock_irqsave(&common->cc_lock, flags);
ath9k_hw_ani_monitor(ah, ah->curchan);
ath_update_survey_stats(sc);
spin_unlock_irqrestore(&common->cc_lock, flags);
}
/* Perform calibration if necessary */
if (longcal || shortcal) {
common->ani.caldone =
ath9k_hw_calibrate(ah,
ah->curchan,
common->rx_chainmask,
longcal);
}
}
ath9k_ps_restore(sc);
set_timer:
/*
* Set timer interval based on previous results.
* The interval must be the shortest necessary to satisfy ANI,
* short calibration and long calibration.
*/
cal_interval = ATH_LONG_CALINTERVAL;
if (sc->sc_ah->config.enable_ani)
cal_interval = min(cal_interval,
(u32)ah->config.ani_poll_interval);
if (!common->ani.caldone)
cal_interval = min(cal_interval, (u32)short_cal_interval);
mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
if (!ah->caldata->paprd_done)
ieee80211_queue_work(sc->hw, &sc->paprd_work);
else if (!ah->paprd_table_write_done)
ath_paprd_activate(sc);
}
}
static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an;
struct ath_hw *ah = sc->sc_ah;
an = (struct ath_node *)sta->drv_priv;
#ifdef CONFIG_ATH9K_DEBUGFS
spin_lock(&sc->nodes_lock);
list_add(&an->list, &sc->nodes);
spin_unlock(&sc->nodes_lock);
an->sta = sta;
#endif
if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
sc->sc_flags |= SC_OP_ENABLE_APM;
if (sc->sc_flags & SC_OP_TXAGGR) {
ath_tx_node_init(sc, an);
an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
sta->ht_cap.ampdu_factor);
an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
}
}
static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
{
struct ath_node *an = (struct ath_node *)sta->drv_priv;
#ifdef CONFIG_ATH9K_DEBUGFS
spin_lock(&sc->nodes_lock);
list_del(&an->list);
spin_unlock(&sc->nodes_lock);
an->sta = NULL;
#endif
if (sc->sc_flags & SC_OP_TXAGGR)
ath_tx_node_cleanup(sc, an);
}
void ath_hw_check(struct work_struct *work)
{
struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
int i;
ath9k_ps_wakeup(sc);
for (i = 0; i < 3; i++) {
if (ath9k_hw_check_alive(sc->sc_ah))
goto out;
msleep(1);
}
ath_reset(sc, true);
out:
ath9k_ps_restore(sc);
}
void ath9k_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
u32 status = sc->intrstatus;
u32 rxmask;
if (status & ATH9K_INT_FATAL) {
ath_reset(sc, true);
return;
}
ath9k_ps_wakeup(sc);
spin_lock(&sc->sc_pcu_lock);
/*
* Only run the baseband hang check if beacons stop working in AP or
* IBSS mode, because it has a high false positive rate. For station
* mode it should not be necessary, since the upper layers will detect
* this through a beacon miss automatically and the following channel
* change will trigger a hardware reset anyway
*/
if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
!ath9k_hw_check_alive(ah))
ieee80211_queue_work(sc->hw, &sc->hw_check_work);
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN);
else
rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
if (status & rxmask) {
/* Check for high priority Rx first */
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_RXHP))
ath_rx_tasklet(sc, 0, true);
ath_rx_tasklet(sc, 0, false);
}
if (status & ATH9K_INT_TX) {
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ath_tx_edma_tasklet(sc);
else
ath_tx_tasklet(sc);
}
if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
/*
* TSF sync does not look correct; remain awake to sync with
* the next Beacon.
*/
ath_dbg(common, ATH_DBG_PS,
"TSFOOR - Sync with next Beacon\n");
sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
}
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
if (status & ATH9K_INT_GENTIMER)
ath_gen_timer_isr(sc->sc_ah);
/* re-enable hardware interrupt */
ath9k_hw_enable_interrupts(ah);
spin_unlock(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
irqreturn_t ath_isr(int irq, void *dev)
{
#define SCHED_INTR ( \
ATH9K_INT_FATAL | \
ATH9K_INT_RXORN | \
ATH9K_INT_RXEOL | \
ATH9K_INT_RX | \
ATH9K_INT_RXLP | \
ATH9K_INT_RXHP | \
ATH9K_INT_TX | \
ATH9K_INT_BMISS | \
ATH9K_INT_CST | \
ATH9K_INT_TSFOOR | \
ATH9K_INT_GENTIMER)
struct ath_softc *sc = dev;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
enum ath9k_int status;
bool sched = false;
/*
* The hardware is not ready/present, don't
* touch anything. Note this can happen early
* on if the IRQ is shared.
*/
if (sc->sc_flags & SC_OP_INVALID)
return IRQ_NONE;
/* shared irq, not for us */
if (!ath9k_hw_intrpend(ah))
return IRQ_NONE;
/*
* Figure out the reason(s) for the interrupt. Note
* that the hal returns a pseudo-ISR that may include
* bits we haven't explicitly enabled so we mask the
* value to insure we only process bits we requested.
*/
ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */
status &= ah->imask; /* discard unasked-for bits */
/*
* If there are no status bits set, then this interrupt was not
* for me (should have been caught above).
*/
if (!status)
return IRQ_NONE;
/* Cache the status */
sc->intrstatus = status;
if (status & SCHED_INTR)
sched = true;
/*
* If a FATAL or RXORN interrupt is received, we have to reset the
* chip immediately.
*/
if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
goto chip_reset;
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
(status & ATH9K_INT_BB_WATCHDOG)) {
spin_lock(&common->cc_lock);
ath_hw_cycle_counters_update(common);
ar9003_hw_bb_watchdog_dbg_info(ah);
spin_unlock(&common->cc_lock);
goto chip_reset;
}
if (status & ATH9K_INT_SWBA)
tasklet_schedule(&sc->bcon_tasklet);
if (status & ATH9K_INT_TXURN)
ath9k_hw_updatetxtriglevel(ah, true);
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
if (status & ATH9K_INT_RXEOL) {
ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
ath9k_hw_set_interrupts(ah, ah->imask);
}
}
if (status & ATH9K_INT_MIB) {
/*
* Disable interrupts until we service the MIB
* interrupt; otherwise it will continue to
* fire.
*/
ath9k_hw_disable_interrupts(ah);
/*
* Let the hal handle the event. We assume
* it will clear whatever condition caused
* the interrupt.
*/
spin_lock(&common->cc_lock);
ath9k_hw_proc_mib_event(ah);
spin_unlock(&common->cc_lock);
ath9k_hw_enable_interrupts(ah);
}
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
if (status & ATH9K_INT_TIM_TIMER) {
if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
goto chip_reset;
/* Clear RxAbort bit so that we can
* receive frames */
ath9k_setpower(sc, ATH9K_PM_AWAKE);
ath9k_hw_setrxabort(sc->sc_ah, 0);
sc->ps_flags |= PS_WAIT_FOR_BEACON;
}
chip_reset:
ath_debug_stat_interrupt(sc, status);
if (sched) {
/* turn off every interrupt */
ath9k_hw_disable_interrupts(ah);
tasklet_schedule(&sc->intr_tq);
}
return IRQ_HANDLED;
#undef SCHED_INTR
}
static void ath9k_bss_assoc_info(struct ath_softc *sc,
struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
if (bss_conf->assoc) {
ath_dbg(common, ATH_DBG_CONFIG,
"Bss Info ASSOC %d, bssid: %pM\n",
bss_conf->aid, common->curbssid);
/* New association, store aid */
common->curaid = bss_conf->aid;
ath9k_hw_write_associd(ah);
/*
* Request a re-configuration of Beacon related timers
* on the receipt of the first Beacon frame (i.e.,
* after time sync with the AP).
*/
sc->ps_flags |= PS_BEACON_SYNC;
/* Configure the beacon */
ath_beacon_config(sc, vif);
/* Reset rssi stats */
sc->last_rssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
} else {
ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
common->curaid = 0;
/* Stop ANI */
sc->sc_flags &= ~SC_OP_ANI_RUN;
del_timer_sync(&common->ani.timer);
}
}
void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_channel *channel = hw->conf.channel;
int r;
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
ath_err(common,
"Unable to reset channel (%u MHz), reset status %d\n",
channel->center_freq, r);
}
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to restart recv logic\n");
goto out;
}
if (sc->sc_flags & SC_OP_BEACONS)
ath_beacon_config(sc, NULL); /* restart beacons */
/* Re-Enable interrupts */
ath9k_hw_set_interrupts(ah, ah->imask);
/* Enable LED */
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
ieee80211_wake_queues(hw);
out:
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_channel *channel = hw->conf.channel;
int r;
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
ieee80211_stop_queues(hw);
/*
* Keep the LED on when the radio is disabled
* during idle unassociated state.
*/
if (!sc->ps_idle) {
ath9k_hw_set_gpio(ah, ah->led_pin, 1);
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
/* Disable interrupts */
ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false); /* clear pending tx frames */
ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
ath_err(ath9k_hw_common(sc->sc_ah),
"Unable to reset channel (%u MHz), reset status %d\n",
channel->center_freq, r);
}
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
int ath_reset(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hw *hw = sc->hw;
int r;
/* Stop ANI */
del_timer_sync(&common->ani.timer);
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
ieee80211_stop_queues(hw);
ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, retry_tx);
ath_stoprecv(sc);
ath_flushrecv(sc);
r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
if (r)
ath_err(common,
"Unable to reset hardware; reset status %d\n", r);
if (ath_startrecv(sc) != 0)
ath_err(common, "Unable to start recv logic\n");
/*
* We may be doing a reset in response to a request
* that changes the channel so update any state that
* might change as a result.
*/
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
ath_beacon_config(sc, NULL); /* restart beacons */
ath9k_hw_set_interrupts(ah, ah->imask);
if (retry_tx) {
int i;
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i)) {
spin_lock_bh(&sc->tx.txq[i].axq_lock);
ath_txq_schedule(sc, &sc->tx.txq[i]);
spin_unlock_bh(&sc->tx.txq[i].axq_lock);
}
}
}
ieee80211_wake_queues(hw);
spin_unlock_bh(&sc->sc_pcu_lock);
/* Start ANI */
ath_start_ani(common);
ath9k_ps_restore(sc);
return r;
}
/**********************/
/* mac80211 callbacks */
/**********************/
static int ath9k_start(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_channel *curchan = hw->conf.channel;
struct ath9k_channel *init_channel;
int r;
ath_dbg(common, ATH_DBG_CONFIG,
"Starting driver with initial channel: %d MHz\n",
curchan->center_freq);
mutex_lock(&sc->mutex);
/* setup initial channel */
sc->chan_idx = curchan->hw_value;
init_channel = ath9k_cmn_get_curchannel(hw, ah);
/* Reset SERDES registers */
ath9k_hw_configpcipowersave(ah, 0, 0);
/*
* The basic interface to setting the hardware in a good
* state is ``reset''. On return the hardware is known to
* be powered up and with interrupts disabled. This must
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
"Unable to reset hardware; reset status %d (freq %u MHz)\n",
r, curchan->center_freq);
spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
/*
* This is needed only to setup initial state
* but it's best done after a reset.
*/
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
/*
* Setup the hardware after reset:
* The receive engine is set going.
* Frame transmit is handled entirely
* in the frame output path; there's nothing to do
* here except setup the interrupt mask.
*/
if (ath_startrecv(sc) != 0) {
ath_err(common, "Unable to start recv logic\n");
r = -EIO;
spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
spin_unlock_bh(&sc->sc_pcu_lock);
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
ATH9K_INT_RXORN | ATH9K_INT_FATAL |
ATH9K_INT_GLOBAL;
if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
ah->imask |= ATH9K_INT_RXHP |
ATH9K_INT_RXLP |
ATH9K_INT_BB_WATCHDOG;
else
ah->imask |= ATH9K_INT_RX;
ah->imask |= ATH9K_INT_GTT;
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ah->imask |= ATH9K_INT_CST;
sc->sc_flags &= ~SC_OP_INVALID;
sc->sc_ah->is_monitoring = false;
/* Disable BMISS interrupt when we're not associated */
ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
ath9k_hw_set_interrupts(ah, ah->imask);
ieee80211_wake_queues(hw);
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
!ah->btcoex_hw.enabled) {
ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
AR_STOMP_LOW_WLAN_WGHT);
ath9k_hw_btcoex_enable(ah);
if (common->bus_ops->bt_coex_prep)
common->bus_ops->bt_coex_prep(common);
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath9k_btcoex_timer_resume(sc);
}
/* User has the option to provide pm-qos value as a module
* parameter rather than using the default value of
* 'ATH9K_PM_QOS_DEFAULT_VALUE'.
*/
pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
common->bus_ops->extn_synch_en(common);
mutex_unlock:
mutex_unlock(&sc->mutex);
return r;
}
static int ath9k_tx(struct ieee80211_hw *hw,
struct sk_buff *skb)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_tx_control txctl;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
if (sc->ps_enabled) {
/*
* mac80211 does not set PM field for normal data frames, so we
* need to update that based on the current PS mode.
*/
if (ieee80211_is_data(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control) &&
!ieee80211_has_pm(hdr->frame_control)) {
ath_dbg(common, ATH_DBG_PS,
"Add PM=1 for a TX frame while in PS mode\n");
hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
}
}
if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
/*
* We are using PS-Poll and mac80211 can request TX while in
* power save mode. Need to wake up hardware for the TX to be
* completed and if needed, also for RX of buffered frames.
*/
ath9k_ps_wakeup(sc);
if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
ath9k_hw_setrxabort(sc->sc_ah, 0);
if (ieee80211_is_pspoll(hdr->frame_control)) {
ath_dbg(common, ATH_DBG_PS,
"Sending PS-Poll to pick a buffered frame\n");
sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
} else {
ath_dbg(common, ATH_DBG_PS,
"Wake up to complete TX\n");
sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
}
/*
* The actual restore operation will happen only after
* the sc_flags bit is cleared. We are just dropping
* the ps_usecount here.
*/
ath9k_ps_restore(sc);
}
memset(&txctl, 0, sizeof(struct ath_tx_control));
txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
ath_dbg(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
if (ath_tx_start(hw, skb, &txctl) != 0) {
ath_dbg(common, ATH_DBG_XMIT, "TX failed\n");
goto exit;
}
return 0;
exit:
dev_kfree_skb_any(skb);
return 0;
}
static void ath9k_stop(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
mutex_lock(&sc->mutex);
if (led_blink)
cancel_delayed_work_sync(&sc->ath_led_blink_work);
cancel_delayed_work_sync(&sc->tx_complete_work);
cancel_delayed_work_sync(&sc->hw_pll_work);
cancel_work_sync(&sc->paprd_work);
cancel_work_sync(&sc->hw_check_work);
if (sc->sc_flags & SC_OP_INVALID) {
ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
mutex_unlock(&sc->mutex);
return;
}
/* Ensure HW is awake when we try to shut it down. */
ath9k_ps_wakeup(sc);
if (ah->btcoex_hw.enabled) {
ath9k_hw_btcoex_disable(ah);
if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath9k_btcoex_timer_pause(sc);
}
spin_lock_bh(&sc->sc_pcu_lock);
/* prevent tasklets to enable interrupts once we disable them */
ah->imask &= ~ATH9K_INT_GLOBAL;
/* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
if (!(sc->sc_flags & SC_OP_INVALID)) {
ath_drain_all_txq(sc, false);
ath_stoprecv(sc);
ath9k_hw_phy_disable(ah);
} else
sc->rx.rxlink = NULL;
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
ath9k_hw_configpcipowersave(ah, 1, 1);
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
* disabled interrupts and not holding a spin lock */
synchronize_irq(sc->irq);
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
ath9k_ps_restore(sc);
sc->ps_idle = true;
ath_radio_disable(sc, hw);
sc->sc_flags |= SC_OP_INVALID;
pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
mutex_unlock(&sc->mutex);
ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
}
bool ath9k_uses_beacons(int type)
{
switch (type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
return true;
default:
return false;
}
}
static void ath9k_reclaim_beacon(struct ath_softc *sc,
struct ieee80211_vif *vif)
{
struct ath_vif *avp = (void *)vif->drv_priv;
/* Disable SWBA interrupt */
sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
ath9k_ps_wakeup(sc);
ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
tasklet_kill(&sc->bcon_tasklet);
ath9k_ps_restore(sc);
ath_beacon_return(sc, avp);
sc->sc_flags &= ~SC_OP_BEACONS;
if (sc->nbcnvifs > 0) {
/* Re-enable beaconing */
sc->sc_ah->imask |= ATH9K_INT_SWBA;
ath9k_ps_wakeup(sc);
ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
ath9k_ps_restore(sc);
}
}
static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
{
struct ath9k_vif_iter_data *iter_data = data;
int i;
if (iter_data->hw_macaddr)
for (i = 0; i < ETH_ALEN; i++)
iter_data->mask[i] &=
~(iter_data->hw_macaddr[i] ^ mac[i]);
switch (vif->type) {
case NL80211_IFTYPE_AP:
iter_data->naps++;
break;
case NL80211_IFTYPE_STATION:
iter_data->nstations++;
break;
case NL80211_IFTYPE_ADHOC:
iter_data->nadhocs++;
break;
case NL80211_IFTYPE_MESH_POINT:
iter_data->nmeshes++;
break;
case NL80211_IFTYPE_WDS:
iter_data->nwds++;
break;
default:
iter_data->nothers++;
break;
}
}
/* Called with sc->mutex held. */
void ath9k_calculate_iter_data(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ath9k_vif_iter_data *iter_data)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
/*
* Use the hardware MAC address as reference, the hardware uses it
* together with the BSSID mask when matching addresses.
*/
memset(iter_data, 0, sizeof(*iter_data));
iter_data->hw_macaddr = common->macaddr;
memset(&iter_data->mask, 0xff, ETH_ALEN);
if (vif)
ath9k_vif_iter(iter_data, vif->addr, vif);
/* Get list of all active MAC addresses */
ieee80211_iterate_active_interfaces_atomic(sc->hw, ath9k_vif_iter,
iter_data);
}
/* Called with sc->mutex held. */
static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_vif_iter_data iter_data;
ath9k_calculate_iter_data(hw, vif, &iter_data);
ath9k_ps_wakeup(sc);
/* Set BSSID mask. */
memcpy(common->bssidmask, iter_data.mask, ETH_ALEN);
ath_hw_setbssidmask(common);
/* Set op-mode & TSF */
if (iter_data.naps > 0) {
ath9k_hw_set_tsfadjust(ah, 1);
sc->sc_flags |= SC_OP_TSF_RESET;
ah->opmode = NL80211_IFTYPE_AP;
} else {
ath9k_hw_set_tsfadjust(ah, 0);
sc->sc_flags &= ~SC_OP_TSF_RESET;
if (iter_data.nwds + iter_data.nmeshes)
ah->opmode = NL80211_IFTYPE_AP;
else if (iter_data.nadhocs)
ah->opmode = NL80211_IFTYPE_ADHOC;
else
ah->opmode = NL80211_IFTYPE_STATION;
}
/*
* Enable MIB interrupts when there are hardware phy counters.
*/
if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) {
if (ah->config.enable_ani)
ah->imask |= ATH9K_INT_MIB;
ah->imask |= ATH9K_INT_TSFOOR;
} else {
ah->imask &= ~ATH9K_INT_MIB;
ah->imask &= ~ATH9K_INT_TSFOOR;
}
ath9k_hw_set_interrupts(ah, ah->imask);
ath9k_ps_restore(sc);
/* Set up ANI */
if ((iter_data.naps + iter_data.nadhocs) > 0) {
sc->sc_flags |= SC_OP_ANI_RUN;
ath_start_ani(common);
} else {
sc->sc_flags &= ~SC_OP_ANI_RUN;
del_timer_sync(&common->ani.timer);
}
}
/* Called with sc->mutex held, vif counts set up properly. */
static void ath9k_do_vif_add_setup(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
ath9k_calculate_summary_state(hw, vif);
if (ath9k_uses_beacons(vif->type)) {
int error;
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
/* This may fail because upper levels do not have beacons
* properly configured yet. That's OK, we assume it
* will be properly configured and then we will be notified
* in the info_changed method and set up beacons properly
* there.
*/
error = ath_beacon_alloc(sc, vif);
if (!error)
ath_beacon_config(sc, vif);
}
}
static int ath9k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
int ret = 0;
mutex_lock(&sc->mutex);
switch (vif->type) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
break;
default:
ath_err(common, "Interface type %d not yet supported\n",
vif->type);
ret = -EOPNOTSUPP;
goto out;
}
if (ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
ath_err(common, "Not enough beacon buffers when adding"
" new interface of type: %i\n",
vif->type);
ret = -ENOBUFS;
goto out;
}
}
if ((vif->type == NL80211_IFTYPE_ADHOC) &&
sc->nvifs > 0) {
ath_err(common, "Cannot create ADHOC interface when other"
" interfaces already exist.\n");
ret = -EINVAL;
goto out;
}
ath_dbg(common, ATH_DBG_CONFIG,
"Attach a VIF of type: %d\n", vif->type);
/* Set the VIF opmode */
avp->av_opmode = vif->type;
avp->av_bslot = -1;
sc->nvifs++;
ath9k_do_vif_add_setup(hw, vif);
out:
mutex_unlock(&sc->mutex);
return ret;
}
static int ath9k_change_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum nl80211_iftype new_type,
bool p2p)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int ret = 0;
ath_dbg(common, ATH_DBG_CONFIG, "Change Interface\n");
mutex_lock(&sc->mutex);
/* See if new interface type is valid. */
if ((new_type == NL80211_IFTYPE_ADHOC) &&
(sc->nvifs > 1)) {
ath_err(common, "When using ADHOC, it must be the only"
" interface.\n");
ret = -EINVAL;
goto out;
}
if (ath9k_uses_beacons(new_type) &&
!ath9k_uses_beacons(vif->type)) {
if (sc->nbcnvifs >= ATH_BCBUF) {
ath_err(common, "No beacon slot available\n");
ret = -ENOBUFS;
goto out;
}
}
/* Clean up old vif stuff */
if (ath9k_uses_beacons(vif->type))
ath9k_reclaim_beacon(sc, vif);
/* Add new settings */
vif->type = new_type;
vif->p2p = p2p;
ath9k_do_vif_add_setup(hw, vif);
out:
mutex_unlock(&sc->mutex);
return ret;
}
static void ath9k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
mutex_lock(&sc->mutex);
sc->nvifs--;
/* Reclaim beacon resources */
if (ath9k_uses_beacons(vif->type))
ath9k_reclaim_beacon(sc, vif);
ath9k_calculate_summary_state(hw, NULL);
mutex_unlock(&sc->mutex);
}
static void ath9k_enable_ps(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
sc->ps_enabled = true;
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
ah->imask |= ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(ah, ah->imask);
}
ath9k_hw_setrxabort(ah, 1);
}
}
static void ath9k_disable_ps(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
sc->ps_enabled = false;
ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
ath9k_hw_setrxabort(ah, 0);
sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
PS_WAIT_FOR_TX_ACK);
if (ah->imask & ATH9K_INT_TIM_TIMER) {
ah->imask &= ~ATH9K_INT_TIM_TIMER;
ath9k_hw_set_interrupts(ah, ah->imask);
}
}
}
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
bool disable_radio = false;
mutex_lock(&sc->mutex);
/*
* Leave this as the first check because we need to turn on the
* radio if it was disabled before prior to processing the rest
* of the changes. Likewise we must only disable the radio towards
* the end.
*/
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
if (!sc->ps_idle) {
ath_radio_enable(sc, hw);
ath_dbg(common, ATH_DBG_CONFIG,
"not-idle: enabling radio\n");
} else {
disable_radio = true;
}
}
/*
* We just prepare to enable PS. We have to wait until our AP has
* ACK'd our null data frame to disable RX otherwise we'll ignore
* those ACKs and end up retransmitting the same null data frames.
* IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
*/
if (changed & IEEE80211_CONF_CHANGE_PS) {
unsigned long flags;
spin_lock_irqsave(&sc->sc_pm_lock, flags);
if (conf->flags & IEEE80211_CONF_PS)
ath9k_enable_ps(sc);
else
ath9k_disable_ps(sc);
spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
}
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
if (conf->flags & IEEE80211_CONF_MONITOR) {
ath_dbg(common, ATH_DBG_CONFIG,
"Monitor mode is enabled\n");
sc->sc_ah->is_monitoring = true;
} else {
ath_dbg(common, ATH_DBG_CONFIG,
"Monitor mode is disabled\n");
sc->sc_ah->is_monitoring = false;
}
}
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos = curchan->hw_value;
int old_pos = -1;
unsigned long flags;
if (ah->curchan)
old_pos = ah->curchan - &ah->channels[0];
if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
sc->sc_flags |= SC_OP_OFFCHANNEL;
else
sc->sc_flags &= ~SC_OP_OFFCHANNEL;
ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
curchan->center_freq);
ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos],
curchan, conf->channel_type);
/* update survey stats for the old channel before switching */
spin_lock_irqsave(&common->cc_lock, flags);
ath_update_survey_stats(sc);
spin_unlock_irqrestore(&common->cc_lock, flags);
/*
* If the operating channel changes, change the survey in-use flags
* along with it.
* Reset the survey data for the new channel, unless we're switching
* back to the operating channel from an off-channel operation.
*/
if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
sc->cur_survey != &sc->survey[pos]) {
if (sc->cur_survey)
sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
sc->cur_survey = &sc->survey[pos];
memset(sc->cur_survey, 0, sizeof(struct survey_info));
sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
} else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
memset(&sc->survey[pos], 0, sizeof(struct survey_info));
}
if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
ath_err(common, "Unable to set channel\n");
mutex_unlock(&sc->mutex);
return -EINVAL;
}
/*
* The most recent snapshot of channel->noisefloor for the old
* channel is only available after the hardware reset. Copy it to
* the survey stats now.
*/
if (old_pos >= 0)
ath_update_survey_nf(sc, old_pos);
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
sc->config.txpowlimit = 2 * conf->power_level;
ath9k_ps_wakeup(sc);
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
ath9k_ps_restore(sc);
}
if (disable_radio) {
ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
ath_radio_disable(sc, hw);
}
mutex_unlock(&sc->mutex);
return 0;
}
#define SUPPORTED_FILTERS \
(FIF_PROMISC_IN_BSS | \
FIF_ALLMULTI | \
FIF_CONTROL | \
FIF_PSPOLL | \
FIF_OTHER_BSS | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_PROBE_REQ | \
FIF_FCSFAIL)
/* FIXME: sc->sc_full_reset ? */
static void ath9k_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct ath_softc *sc = hw->priv;
u32 rfilt;
changed_flags &= SUPPORTED_FILTERS;
*total_flags &= SUPPORTED_FILTERS;
sc->rx.rxfilter = *total_flags;
ath9k_ps_wakeup(sc);
rfilt = ath_calcrxfilter(sc);
ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
ath9k_ps_restore(sc);
ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
"Set HW RX filter: 0x%x\n", rfilt);
}
static int ath9k_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
ath_node_attach(sc, sta);
return 0;
}
static int ath9k_sta_remove(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath_softc *sc = hw->priv;
ath_node_detach(sc, sta);
return 0;
}
static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_txq *txq;
struct ath9k_tx_queue_info qi;
int ret = 0;
if (queue >= WME_NUM_AC)
return 0;
txq = sc->tx.txq_map[queue];
mutex_lock(&sc->mutex);
memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
qi.tqi_aifs = params->aifs;
qi.tqi_cwmin = params->cw_min;
qi.tqi_cwmax = params->cw_max;
qi.tqi_burstTime = params->txop;
ath_dbg(common, ATH_DBG_CONFIG,
"Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
queue, txq->axq_qnum, params->aifs, params->cw_min,
params->cw_max, params->txop);
ret = ath_txq_update(sc, txq->axq_qnum, &qi);
if (ret)
ath_err(common, "TXQ Update failed\n");
if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
if (queue == WME_AC_BE && !ret)
ath_beaconq_config(sc);
mutex_unlock(&sc->mutex);
return ret;
}
static int ath9k_set_key(struct ieee80211_hw *hw,
enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int ret = 0;
if (ath9k_modparam_nohwcrypt)
return -ENOSPC;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
switch (cmd) {
case SET_KEY:
ret = ath_key_config(common, vif, sta, key);
if (ret >= 0) {
key->hw_key_idx = ret;
/* push IV and Michael MIC generation to stack */
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
if (sc->sc_ah->sw_mgmt_crypto &&
key->cipher == WLAN_CIPHER_SUITE_CCMP)
key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
ret = 0;
}
break;
case DISABLE_KEY:
ath_key_delete(common, key);
break;
default:
ret = -EINVAL;
}
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return ret;
}
static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ath_vif *avp = (void *)vif->drv_priv;
int slottime;
int error;
mutex_lock(&sc->mutex);
if (changed & BSS_CHANGED_BSSID) {
/* Set BSSID */
memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
common->curaid = 0;
ath9k_hw_write_associd(ah);
/* Set aggregation protection mode parameters */
sc->config.ath_aggr_prot = 0;
ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
common->curbssid, common->curaid);
/* need to reconfigure the beacon */
sc->sc_flags &= ~SC_OP_BEACONS ;
}
/* Enable transmission of beacons (AP, IBSS, MESH) */
if ((changed & BSS_CHANGED_BEACON) ||
((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
error = ath_beacon_alloc(sc, vif);
if (!error)
ath_beacon_config(sc, vif);
}
if (changed & BSS_CHANGED_ERP_SLOT) {
if (bss_conf->use_short_slot)
slottime = 9;
else
slottime = 20;
if (vif->type == NL80211_IFTYPE_AP) {
/*
* Defer update, so that connected stations can adjust
* their settings at the same time.
* See beacon.c for more details
*/
sc->beacon.slottime = slottime;
sc->beacon.updateslot = UPDATE;
} else {
ah->slottime = slottime;
ath9k_hw_init_global_settings(ah);
}
}
/* Disable transmission of beacons */
if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
if (changed & BSS_CHANGED_BEACON_INT) {
sc->beacon_interval = bss_conf->beacon_int;
/*
* In case of AP mode, the HW TSF has to be reset
* when the beacon interval changes.
*/
if (vif->type == NL80211_IFTYPE_AP) {
sc->sc_flags |= SC_OP_TSF_RESET;
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
error = ath_beacon_alloc(sc, vif);
if (!error)
ath_beacon_config(sc, vif);
} else {
ath_beacon_config(sc, vif);
}
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
bss_conf->use_short_preamble);
if (bss_conf->use_short_preamble)
sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
else
sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
bss_conf->use_cts_prot);
if (bss_conf->use_cts_prot &&
hw->conf.channel->band != IEEE80211_BAND_5GHZ)
sc->sc_flags |= SC_OP_PROTECT_ENABLE;
else
sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
}
if (changed & BSS_CHANGED_ASSOC) {
ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
bss_conf->assoc);
ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
}
mutex_unlock(&sc->mutex);
}
static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
u64 tsf;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
tsf = ath9k_hw_gettsf64(sc->sc_ah);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
return tsf;
}
static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath9k_hw_settsf64(sc->sc_ah, tsf);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static void ath9k_reset_tsf(struct ieee80211_hw *hw)
{
struct ath_softc *sc = hw->priv;
mutex_lock(&sc->mutex);
ath9k_ps_wakeup(sc);
ath9k_hw_reset_tsf(sc->sc_ah);
ath9k_ps_restore(sc);
mutex_unlock(&sc->mutex);
}
static int ath9k_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta,
u16 tid, u16 *ssn, u8 buf_size)
{
struct ath_softc *sc = hw->priv;
int ret = 0;
local_bh_disable();
switch (action) {
case IEEE80211_AMPDU_RX_START:
if (!(sc->sc_flags & SC_OP_RXAGGR))
ret = -ENOTSUPP;
break;
case IEEE80211_AMPDU_RX_STOP:
break;
case IEEE80211_AMPDU_TX_START:
if (!(sc->sc_flags & SC_OP_TXAGGR))
return -EOPNOTSUPP;
ath9k_ps_wakeup(sc);
ret = ath_tx_aggr_start(sc, sta, tid, ssn);
if (!ret)
ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_STOP:
ath9k_ps_wakeup(sc);
ath_tx_aggr_stop(sc, sta, tid);
ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
ath9k_ps_restore(sc);
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
ath9k_ps_wakeup(sc);
ath_tx_aggr_resume(sc, sta, tid);
ath9k_ps_restore(sc);
break;
default:
ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
}
local_bh_enable();
return ret;
}
static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey)
{
struct ath_softc *sc = hw->priv;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
unsigned long flags;
int pos;
spin_lock_irqsave(&common->cc_lock, flags);
if (idx == 0)
ath_update_survey_stats(sc);
sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
if (sband && idx >= sband->n_channels) {
idx -= sband->n_channels;
sband = NULL;
}
if (!sband)
sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
if (!sband || idx >= sband->n_channels) {
spin_unlock_irqrestore(&common->cc_lock, flags);
return -ENOENT;
}
chan = &sband->channels[idx];
pos = chan->hw_value;
memcpy(survey, &sc->survey[pos], sizeof(*survey));
survey->channel = chan;
spin_unlock_irqrestore(&common->cc_lock, flags);
return 0;
}
static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
{
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
mutex_lock(&sc->mutex);
ah->coverage_class = coverage_class;
ath9k_hw_init_global_settings(ah);
mutex_unlock(&sc->mutex);
}
struct ieee80211_ops ath9k_ops = {
.tx = ath9k_tx,
.start = ath9k_start,
.stop = ath9k_stop,
.add_interface = ath9k_add_interface,
.change_interface = ath9k_change_interface,
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
.configure_filter = ath9k_configure_filter,
.sta_add = ath9k_sta_add,
.sta_remove = ath9k_sta_remove,
.conf_tx = ath9k_conf_tx,
.bss_info_changed = ath9k_bss_info_changed,
.set_key = ath9k_set_key,
.get_tsf = ath9k_get_tsf,
.set_tsf = ath9k_set_tsf,
.reset_tsf = ath9k_reset_tsf,
.ampdu_action = ath9k_ampdu_action,
.get_survey = ath9k_get_survey,
.rfkill_poll = ath9k_rfkill_poll_state,
.set_coverage_class = ath9k_set_coverage_class,
};
Reference in New Issue View Git Blame Copy Permalink