OpenCloudOS-Kernel/drivers/usb
Sebastian Andrzej Siewior b14e840d04 USB: isp1760: Implement solution for erratum 2
The document says:
|2.1 Problem description
|    When at least two USB devices are simultaneously running, it is observed that
|    sometimes the INT corresponding to one of the USB devices stops occurring. This may
|    be observed sometimes with USB-to-serial or USB-to-network devices.
|    The problem is not noticed when only USB mass storage devices are running.
|2.2 Implication
|    This issue is because of the clearing of the respective Done Map bit on reading the ATL
|    PTD Done Map register when an INT is generated by another PTD completion, but is not
|    found set on that read access. In this situation, the respective Done Map bit will remain
|    reset and no further INT will be asserted so the data transfer corresponding to that USB
|    device will stop.
|2.3 Workaround
|    An SOF INT can be used instead of an ATL INT with polling on Done bits. A time-out can
|    be implemented and if a certain Done bit is never set, verification of the PTD completion
|    can be done by reading PTD contents (valid bit).
|    This is a proven workaround implemented in software.

Russell King run into this with an USB-to-serial converter. This patch
implements his suggestion to enable the high frequent SOF interrupt only
at the time we have ATL packages queued. It goes even one step further
and enables the SOF interrupt only if we have more than one ATL packet
queued at the same time.

Cc: <stable@kernel.org> # [2.6.35.x, 2.6.36.x, 2.6.37.x]
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 10:47:55 -08:00
..
atm USB: ueagle-atm: use system_wq instead of dedicated workqueues 2011-01-22 19:38:26 -08:00
c67x00 usb: makefile cleanup 2010-10-22 10:22:07 -07:00
class USB: cdc-acm: Adding second ACM channel support for Nokia N8 2011-02-04 12:38:14 -08:00
core Merge 2.6.38-rc5 into usb-next 2011-02-17 09:56:55 -08:00
early USB: ehci-dbgp: fix typo in startup message 2011-01-22 19:35:40 -08:00
gadget usb: fusb300_udc: add more "ep%d" names 2011-02-17 10:47:55 -08:00
host USB: isp1760: Implement solution for erratum 2 2011-02-17 10:47:55 -08:00
image SCSI host lock push-down 2010-11-16 13:33:23 -08:00
misc Merge 2.6.38-rc5 into usb-next 2011-02-17 09:56:55 -08:00
mon USB: usbmon: fix-up docs and text API for sparse ISO 2011-02-04 11:46:57 -08:00
musb Merge 2.6.38-rc5 into usb-next 2011-02-17 09:56:55 -08:00
otg USB: Fix trout build failure with ci13xxx_msm gadget 2011-02-04 12:38:14 -08:00
serial Merge 2.6.38-rc5 into usb-next 2011-02-17 09:56:55 -08:00
storage Merge 2.6.38-rc5 into usb-next 2011-02-17 09:56:55 -08:00
wusbcore USB: wusbcore: rh.c Typo change desciptor to descriptor. 2011-01-22 19:35:39 -08:00
Kconfig Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
Makefile USB: drivers/usb/Makefile: conditionally descend to 'early' 2010-08-10 14:35:38 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.