3296 lines
82 KiB
C
3296 lines
82 KiB
C
/*
|
|
* Synopsys DesignWare Multimedia Card Interface driver
|
|
* (Based on NXP driver for lpc 31xx)
|
|
*
|
|
* Copyright (C) 2009 NXP Semiconductors
|
|
* Copyright (C) 2009, 2010 Imagination Technologies Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/blkdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/mmc/sd.h>
|
|
#include <linux/mmc/sdio.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/mmc/slot-gpio.h>
|
|
|
|
#include "dw_mmc.h"
|
|
|
|
/* Common flag combinations */
|
|
#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
|
|
SDMMC_INT_HTO | SDMMC_INT_SBE | \
|
|
SDMMC_INT_EBE)
|
|
#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
|
|
SDMMC_INT_RESP_ERR)
|
|
#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
|
|
DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
|
|
#define DW_MCI_SEND_STATUS 1
|
|
#define DW_MCI_RECV_STATUS 2
|
|
#define DW_MCI_DMA_THRESHOLD 16
|
|
|
|
#define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */
|
|
#define DW_MCI_FREQ_MIN 400000 /* unit: HZ */
|
|
|
|
#define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
|
|
SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
|
|
SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
|
|
SDMMC_IDMAC_INT_TI)
|
|
|
|
struct idmac_desc_64addr {
|
|
u32 des0; /* Control Descriptor */
|
|
|
|
u32 des1; /* Reserved */
|
|
|
|
u32 des2; /*Buffer sizes */
|
|
#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
|
|
((d)->des2 = ((d)->des2 & cpu_to_le32(0x03ffe000)) | \
|
|
((cpu_to_le32(s)) & cpu_to_le32(0x1fff)))
|
|
|
|
u32 des3; /* Reserved */
|
|
|
|
u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
|
|
u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
|
|
|
|
u32 des6; /* Lower 32-bits of Next Descriptor Address */
|
|
u32 des7; /* Upper 32-bits of Next Descriptor Address */
|
|
};
|
|
|
|
struct idmac_desc {
|
|
__le32 des0; /* Control Descriptor */
|
|
#define IDMAC_DES0_DIC BIT(1)
|
|
#define IDMAC_DES0_LD BIT(2)
|
|
#define IDMAC_DES0_FD BIT(3)
|
|
#define IDMAC_DES0_CH BIT(4)
|
|
#define IDMAC_DES0_ER BIT(5)
|
|
#define IDMAC_DES0_CES BIT(30)
|
|
#define IDMAC_DES0_OWN BIT(31)
|
|
|
|
__le32 des1; /* Buffer sizes */
|
|
#define IDMAC_SET_BUFFER1_SIZE(d, s) \
|
|
((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
|
|
|
|
__le32 des2; /* buffer 1 physical address */
|
|
|
|
__le32 des3; /* buffer 2 physical address */
|
|
};
|
|
|
|
/* Each descriptor can transfer up to 4KB of data in chained mode */
|
|
#define DW_MCI_DESC_DATA_LENGTH 0x1000
|
|
|
|
static bool dw_mci_reset(struct dw_mci *host);
|
|
static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
|
|
static int dw_mci_card_busy(struct mmc_host *mmc);
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
static int dw_mci_req_show(struct seq_file *s, void *v)
|
|
{
|
|
struct dw_mci_slot *slot = s->private;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_command *stop;
|
|
struct mmc_data *data;
|
|
|
|
/* Make sure we get a consistent snapshot */
|
|
spin_lock_bh(&slot->host->lock);
|
|
mrq = slot->mrq;
|
|
|
|
if (mrq) {
|
|
cmd = mrq->cmd;
|
|
data = mrq->data;
|
|
stop = mrq->stop;
|
|
|
|
if (cmd)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
cmd->opcode, cmd->arg, cmd->flags,
|
|
cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
cmd->resp[2], cmd->error);
|
|
if (data)
|
|
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
|
|
data->bytes_xfered, data->blocks,
|
|
data->blksz, data->flags, data->error);
|
|
if (stop)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
stop->opcode, stop->arg, stop->flags,
|
|
stop->resp[0], stop->resp[1], stop->resp[2],
|
|
stop->resp[2], stop->error);
|
|
}
|
|
|
|
spin_unlock_bh(&slot->host->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_req_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, dw_mci_req_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations dw_mci_req_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = dw_mci_req_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int dw_mci_regs_show(struct seq_file *s, void *v)
|
|
{
|
|
seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
|
|
seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
|
|
seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
|
|
seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
|
|
seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
|
|
seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, dw_mci_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations dw_mci_regs_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = dw_mci_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
|
|
{
|
|
struct mmc_host *mmc = slot->mmc;
|
|
struct dw_mci *host = slot->host;
|
|
struct dentry *root;
|
|
struct dentry *node;
|
|
|
|
root = mmc->debugfs_root;
|
|
if (!root)
|
|
return;
|
|
|
|
node = debugfs_create_file("regs", S_IRUSR, root, host,
|
|
&dw_mci_regs_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_file("req", S_IRUSR, root, slot,
|
|
&dw_mci_req_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("pending_events", S_IRUSR, root,
|
|
(u32 *)&host->pending_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("completed_events", S_IRUSR, root,
|
|
(u32 *)&host->completed_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
|
|
}
|
|
#endif /* defined(CONFIG_DEBUG_FS) */
|
|
|
|
static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
|
|
|
|
static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
|
|
{
|
|
struct mmc_data *data;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
|
|
u32 cmdr;
|
|
|
|
cmd->error = -EINPROGRESS;
|
|
cmdr = cmd->opcode;
|
|
|
|
if (cmd->opcode == MMC_STOP_TRANSMISSION ||
|
|
cmd->opcode == MMC_GO_IDLE_STATE ||
|
|
cmd->opcode == MMC_GO_INACTIVE_STATE ||
|
|
(cmd->opcode == SD_IO_RW_DIRECT &&
|
|
((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
|
|
cmdr |= SDMMC_CMD_STOP;
|
|
else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
|
|
cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
|
|
|
|
if (cmd->opcode == SD_SWITCH_VOLTAGE) {
|
|
u32 clk_en_a;
|
|
|
|
/* Special bit makes CMD11 not die */
|
|
cmdr |= SDMMC_CMD_VOLT_SWITCH;
|
|
|
|
/* Change state to continue to handle CMD11 weirdness */
|
|
WARN_ON(slot->host->state != STATE_SENDING_CMD);
|
|
slot->host->state = STATE_SENDING_CMD11;
|
|
|
|
/*
|
|
* We need to disable low power mode (automatic clock stop)
|
|
* while doing voltage switch so we don't confuse the card,
|
|
* since stopping the clock is a specific part of the UHS
|
|
* voltage change dance.
|
|
*
|
|
* Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
|
|
* unconditionally turned back on in dw_mci_setup_bus() if it's
|
|
* ever called with a non-zero clock. That shouldn't happen
|
|
* until the voltage change is all done.
|
|
*/
|
|
clk_en_a = mci_readl(host, CLKENA);
|
|
clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
|
|
mci_writel(host, CLKENA, clk_en_a);
|
|
mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
|
|
SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
}
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
/* We expect a response, so set this bit */
|
|
cmdr |= SDMMC_CMD_RESP_EXP;
|
|
if (cmd->flags & MMC_RSP_136)
|
|
cmdr |= SDMMC_CMD_RESP_LONG;
|
|
}
|
|
|
|
if (cmd->flags & MMC_RSP_CRC)
|
|
cmdr |= SDMMC_CMD_RESP_CRC;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
cmdr |= SDMMC_CMD_DAT_EXP;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
cmdr |= SDMMC_CMD_STRM_MODE;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmdr |= SDMMC_CMD_DAT_WR;
|
|
}
|
|
|
|
if (drv_data && drv_data->prepare_command)
|
|
drv_data->prepare_command(slot->host, &cmdr);
|
|
|
|
return cmdr;
|
|
}
|
|
|
|
static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
|
|
{
|
|
struct mmc_command *stop;
|
|
u32 cmdr;
|
|
|
|
if (!cmd->data)
|
|
return 0;
|
|
|
|
stop = &host->stop_abort;
|
|
cmdr = cmd->opcode;
|
|
memset(stop, 0, sizeof(struct mmc_command));
|
|
|
|
if (cmdr == MMC_READ_SINGLE_BLOCK ||
|
|
cmdr == MMC_READ_MULTIPLE_BLOCK ||
|
|
cmdr == MMC_WRITE_BLOCK ||
|
|
cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
|
|
cmdr == MMC_SEND_TUNING_BLOCK ||
|
|
cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
|
|
stop->opcode = MMC_STOP_TRANSMISSION;
|
|
stop->arg = 0;
|
|
stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
|
|
} else if (cmdr == SD_IO_RW_EXTENDED) {
|
|
stop->opcode = SD_IO_RW_DIRECT;
|
|
stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
|
|
((cmd->arg >> 28) & 0x7);
|
|
stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
|
|
} else {
|
|
return 0;
|
|
}
|
|
|
|
cmdr = stop->opcode | SDMMC_CMD_STOP |
|
|
SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
|
|
|
|
return cmdr;
|
|
}
|
|
|
|
static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
|
|
/*
|
|
* Databook says that before issuing a new data transfer command
|
|
* we need to check to see if the card is busy. Data transfer commands
|
|
* all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that.
|
|
*
|
|
* ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is
|
|
* expected.
|
|
*/
|
|
if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) &&
|
|
!(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) {
|
|
while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) {
|
|
if (time_after(jiffies, timeout)) {
|
|
/* Command will fail; we'll pass error then */
|
|
dev_err(host->dev, "Busy; trying anyway\n");
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dw_mci_start_command(struct dw_mci *host,
|
|
struct mmc_command *cmd, u32 cmd_flags)
|
|
{
|
|
host->cmd = cmd;
|
|
dev_vdbg(host->dev,
|
|
"start command: ARGR=0x%08x CMDR=0x%08x\n",
|
|
cmd->arg, cmd_flags);
|
|
|
|
mci_writel(host, CMDARG, cmd->arg);
|
|
wmb(); /* drain writebuffer */
|
|
dw_mci_wait_while_busy(host, cmd_flags);
|
|
|
|
mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
|
|
}
|
|
|
|
static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
|
|
|
|
dw_mci_start_command(host, stop, host->stop_cmdr);
|
|
}
|
|
|
|
/* DMA interface functions */
|
|
static void dw_mci_stop_dma(struct dw_mci *host)
|
|
{
|
|
if (host->using_dma) {
|
|
host->dma_ops->stop(host);
|
|
host->dma_ops->cleanup(host);
|
|
}
|
|
|
|
/* Data transfer was stopped by the interrupt handler */
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
static int dw_mci_get_dma_dir(struct mmc_data *data)
|
|
{
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
return DMA_TO_DEVICE;
|
|
else
|
|
return DMA_FROM_DEVICE;
|
|
}
|
|
|
|
static void dw_mci_dma_cleanup(struct dw_mci *host)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
|
|
if (data)
|
|
if (!data->host_cookie)
|
|
dma_unmap_sg(host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
}
|
|
|
|
static void dw_mci_idmac_reset(struct dw_mci *host)
|
|
{
|
|
u32 bmod = mci_readl(host, BMOD);
|
|
/* Software reset of DMA */
|
|
bmod |= SDMMC_IDMAC_SWRESET;
|
|
mci_writel(host, BMOD, bmod);
|
|
}
|
|
|
|
static void dw_mci_idmac_stop_dma(struct dw_mci *host)
|
|
{
|
|
u32 temp;
|
|
|
|
/* Disable and reset the IDMAC interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp &= ~SDMMC_CTRL_USE_IDMAC;
|
|
temp |= SDMMC_CTRL_DMA_RESET;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/* Stop the IDMAC running */
|
|
temp = mci_readl(host, BMOD);
|
|
temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
|
|
temp |= SDMMC_IDMAC_SWRESET;
|
|
mci_writel(host, BMOD, temp);
|
|
}
|
|
|
|
static void dw_mci_dmac_complete_dma(void *arg)
|
|
{
|
|
struct dw_mci *host = arg;
|
|
struct mmc_data *data = host->data;
|
|
|
|
dev_vdbg(host->dev, "DMA complete\n");
|
|
|
|
if ((host->use_dma == TRANS_MODE_EDMAC) &&
|
|
data && (data->flags & MMC_DATA_READ))
|
|
/* Invalidate cache after read */
|
|
dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc),
|
|
data->sg,
|
|
data->sg_len,
|
|
DMA_FROM_DEVICE);
|
|
|
|
host->dma_ops->cleanup(host);
|
|
|
|
/*
|
|
* If the card was removed, data will be NULL. No point in trying to
|
|
* send the stop command or waiting for NBUSY in this case.
|
|
*/
|
|
if (data) {
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
|
|
unsigned int sg_len)
|
|
{
|
|
unsigned int desc_len;
|
|
int i;
|
|
|
|
if (host->dma_64bit_address == 1) {
|
|
struct idmac_desc_64addr *desc_first, *desc_last, *desc;
|
|
|
|
desc_first = desc_last = desc = host->sg_cpu;
|
|
|
|
for (i = 0; i < sg_len; i++) {
|
|
unsigned int length = sg_dma_len(&data->sg[i]);
|
|
|
|
u64 mem_addr = sg_dma_address(&data->sg[i]);
|
|
|
|
for ( ; length ; desc++) {
|
|
desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
|
|
length : DW_MCI_DESC_DATA_LENGTH;
|
|
|
|
length -= desc_len;
|
|
|
|
/*
|
|
* Set the OWN bit and disable interrupts
|
|
* for this descriptor
|
|
*/
|
|
desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
|
|
IDMAC_DES0_CH;
|
|
|
|
/* Buffer length */
|
|
IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, desc_len);
|
|
|
|
/* Physical address to DMA to/from */
|
|
desc->des4 = mem_addr & 0xffffffff;
|
|
desc->des5 = mem_addr >> 32;
|
|
|
|
/* Update physical address for the next desc */
|
|
mem_addr += desc_len;
|
|
|
|
/* Save pointer to the last descriptor */
|
|
desc_last = desc;
|
|
}
|
|
}
|
|
|
|
/* Set first descriptor */
|
|
desc_first->des0 |= IDMAC_DES0_FD;
|
|
|
|
/* Set last descriptor */
|
|
desc_last->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
|
|
desc_last->des0 |= IDMAC_DES0_LD;
|
|
|
|
} else {
|
|
struct idmac_desc *desc_first, *desc_last, *desc;
|
|
|
|
desc_first = desc_last = desc = host->sg_cpu;
|
|
|
|
for (i = 0; i < sg_len; i++) {
|
|
unsigned int length = sg_dma_len(&data->sg[i]);
|
|
|
|
u32 mem_addr = sg_dma_address(&data->sg[i]);
|
|
|
|
for ( ; length ; desc++) {
|
|
desc_len = (length <= DW_MCI_DESC_DATA_LENGTH) ?
|
|
length : DW_MCI_DESC_DATA_LENGTH;
|
|
|
|
length -= desc_len;
|
|
|
|
/*
|
|
* Set the OWN bit and disable interrupts
|
|
* for this descriptor
|
|
*/
|
|
desc->des0 = cpu_to_le32(IDMAC_DES0_OWN |
|
|
IDMAC_DES0_DIC |
|
|
IDMAC_DES0_CH);
|
|
|
|
/* Buffer length */
|
|
IDMAC_SET_BUFFER1_SIZE(desc, desc_len);
|
|
|
|
/* Physical address to DMA to/from */
|
|
desc->des2 = cpu_to_le32(mem_addr);
|
|
|
|
/* Update physical address for the next desc */
|
|
mem_addr += desc_len;
|
|
|
|
/* Save pointer to the last descriptor */
|
|
desc_last = desc;
|
|
}
|
|
}
|
|
|
|
/* Set first descriptor */
|
|
desc_first->des0 |= cpu_to_le32(IDMAC_DES0_FD);
|
|
|
|
/* Set last descriptor */
|
|
desc_last->des0 &= cpu_to_le32(~(IDMAC_DES0_CH |
|
|
IDMAC_DES0_DIC));
|
|
desc_last->des0 |= cpu_to_le32(IDMAC_DES0_LD);
|
|
}
|
|
|
|
wmb(); /* drain writebuffer */
|
|
}
|
|
|
|
static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
|
|
{
|
|
u32 temp;
|
|
|
|
dw_mci_translate_sglist(host, host->data, sg_len);
|
|
|
|
/* Make sure to reset DMA in case we did PIO before this */
|
|
dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
|
|
dw_mci_idmac_reset(host);
|
|
|
|
/* Select IDMAC interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp |= SDMMC_CTRL_USE_IDMAC;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/* drain writebuffer */
|
|
wmb();
|
|
|
|
/* Enable the IDMAC */
|
|
temp = mci_readl(host, BMOD);
|
|
temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
|
|
mci_writel(host, BMOD, temp);
|
|
|
|
/* Start it running */
|
|
mci_writel(host, PLDMND, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_idmac_init(struct dw_mci *host)
|
|
{
|
|
int i;
|
|
|
|
if (host->dma_64bit_address == 1) {
|
|
struct idmac_desc_64addr *p;
|
|
/* Number of descriptors in the ring buffer */
|
|
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
|
|
|
|
/* Forward link the descriptor list */
|
|
for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
|
|
i++, p++) {
|
|
p->des6 = (host->sg_dma +
|
|
(sizeof(struct idmac_desc_64addr) *
|
|
(i + 1))) & 0xffffffff;
|
|
|
|
p->des7 = (u64)(host->sg_dma +
|
|
(sizeof(struct idmac_desc_64addr) *
|
|
(i + 1))) >> 32;
|
|
/* Initialize reserved and buffer size fields to "0" */
|
|
p->des1 = 0;
|
|
p->des2 = 0;
|
|
p->des3 = 0;
|
|
}
|
|
|
|
/* Set the last descriptor as the end-of-ring descriptor */
|
|
p->des6 = host->sg_dma & 0xffffffff;
|
|
p->des7 = (u64)host->sg_dma >> 32;
|
|
p->des0 = IDMAC_DES0_ER;
|
|
|
|
} else {
|
|
struct idmac_desc *p;
|
|
/* Number of descriptors in the ring buffer */
|
|
host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
|
|
|
|
/* Forward link the descriptor list */
|
|
for (i = 0, p = host->sg_cpu;
|
|
i < host->ring_size - 1;
|
|
i++, p++) {
|
|
p->des3 = cpu_to_le32(host->sg_dma +
|
|
(sizeof(struct idmac_desc) * (i + 1)));
|
|
p->des1 = 0;
|
|
}
|
|
|
|
/* Set the last descriptor as the end-of-ring descriptor */
|
|
p->des3 = cpu_to_le32(host->sg_dma);
|
|
p->des0 = cpu_to_le32(IDMAC_DES0_ER);
|
|
}
|
|
|
|
dw_mci_idmac_reset(host);
|
|
|
|
if (host->dma_64bit_address == 1) {
|
|
/* Mask out interrupts - get Tx & Rx complete only */
|
|
mci_writel(host, IDSTS64, IDMAC_INT_CLR);
|
|
mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
|
|
SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
|
|
|
|
/* Set the descriptor base address */
|
|
mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
|
|
mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
|
|
|
|
} else {
|
|
/* Mask out interrupts - get Tx & Rx complete only */
|
|
mci_writel(host, IDSTS, IDMAC_INT_CLR);
|
|
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
|
|
SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
|
|
|
|
/* Set the descriptor base address */
|
|
mci_writel(host, DBADDR, host->sg_dma);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
|
|
.init = dw_mci_idmac_init,
|
|
.start = dw_mci_idmac_start_dma,
|
|
.stop = dw_mci_idmac_stop_dma,
|
|
.complete = dw_mci_dmac_complete_dma,
|
|
.cleanup = dw_mci_dma_cleanup,
|
|
};
|
|
|
|
static void dw_mci_edmac_stop_dma(struct dw_mci *host)
|
|
{
|
|
dmaengine_terminate_all(host->dms->ch);
|
|
}
|
|
|
|
static int dw_mci_edmac_start_dma(struct dw_mci *host,
|
|
unsigned int sg_len)
|
|
{
|
|
struct dma_slave_config cfg;
|
|
struct dma_async_tx_descriptor *desc = NULL;
|
|
struct scatterlist *sgl = host->data->sg;
|
|
const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
|
|
u32 sg_elems = host->data->sg_len;
|
|
u32 fifoth_val;
|
|
u32 fifo_offset = host->fifo_reg - host->regs;
|
|
int ret = 0;
|
|
|
|
/* Set external dma config: burst size, burst width */
|
|
cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
|
|
cfg.src_addr = cfg.dst_addr;
|
|
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
|
|
/* Match burst msize with external dma config */
|
|
fifoth_val = mci_readl(host, FIFOTH);
|
|
cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7];
|
|
cfg.src_maxburst = cfg.dst_maxburst;
|
|
|
|
if (host->data->flags & MMC_DATA_WRITE)
|
|
cfg.direction = DMA_MEM_TO_DEV;
|
|
else
|
|
cfg.direction = DMA_DEV_TO_MEM;
|
|
|
|
ret = dmaengine_slave_config(host->dms->ch, &cfg);
|
|
if (ret) {
|
|
dev_err(host->dev, "Failed to config edmac.\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
desc = dmaengine_prep_slave_sg(host->dms->ch, sgl,
|
|
sg_len, cfg.direction,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc) {
|
|
dev_err(host->dev, "Can't prepare slave sg.\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Set dw_mci_dmac_complete_dma as callback */
|
|
desc->callback = dw_mci_dmac_complete_dma;
|
|
desc->callback_param = (void *)host;
|
|
dmaengine_submit(desc);
|
|
|
|
/* Flush cache before write */
|
|
if (host->data->flags & MMC_DATA_WRITE)
|
|
dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl,
|
|
sg_elems, DMA_TO_DEVICE);
|
|
|
|
dma_async_issue_pending(host->dms->ch);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_edmac_init(struct dw_mci *host)
|
|
{
|
|
/* Request external dma channel */
|
|
host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL);
|
|
if (!host->dms)
|
|
return -ENOMEM;
|
|
|
|
host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx");
|
|
if (!host->dms->ch) {
|
|
dev_err(host->dev, "Failed to get external DMA channel.\n");
|
|
kfree(host->dms);
|
|
host->dms = NULL;
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_edmac_exit(struct dw_mci *host)
|
|
{
|
|
if (host->dms) {
|
|
if (host->dms->ch) {
|
|
dma_release_channel(host->dms->ch);
|
|
host->dms->ch = NULL;
|
|
}
|
|
kfree(host->dms);
|
|
host->dms = NULL;
|
|
}
|
|
}
|
|
|
|
static const struct dw_mci_dma_ops dw_mci_edmac_ops = {
|
|
.init = dw_mci_edmac_init,
|
|
.exit = dw_mci_edmac_exit,
|
|
.start = dw_mci_edmac_start_dma,
|
|
.stop = dw_mci_edmac_stop_dma,
|
|
.complete = dw_mci_dmac_complete_dma,
|
|
.cleanup = dw_mci_dma_cleanup,
|
|
};
|
|
|
|
static int dw_mci_pre_dma_transfer(struct dw_mci *host,
|
|
struct mmc_data *data,
|
|
bool next)
|
|
{
|
|
struct scatterlist *sg;
|
|
unsigned int i, sg_len;
|
|
|
|
if (!next && data->host_cookie)
|
|
return data->host_cookie;
|
|
|
|
/*
|
|
* We don't do DMA on "complex" transfers, i.e. with
|
|
* non-word-aligned buffers or lengths. Also, we don't bother
|
|
* with all the DMA setup overhead for short transfers.
|
|
*/
|
|
if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
|
|
return -EINVAL;
|
|
|
|
if (data->blksz & 3)
|
|
return -EINVAL;
|
|
|
|
for_each_sg(data->sg, sg, data->sg_len, i) {
|
|
if (sg->offset & 3 || sg->length & 3)
|
|
return -EINVAL;
|
|
}
|
|
|
|
sg_len = dma_map_sg(host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
if (sg_len == 0)
|
|
return -EINVAL;
|
|
|
|
if (next)
|
|
data->host_cookie = sg_len;
|
|
|
|
return sg_len;
|
|
}
|
|
|
|
static void dw_mci_pre_req(struct mmc_host *mmc,
|
|
struct mmc_request *mrq,
|
|
bool is_first_req)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!slot->host->use_dma || !data)
|
|
return;
|
|
|
|
if (data->host_cookie) {
|
|
data->host_cookie = 0;
|
|
return;
|
|
}
|
|
|
|
if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
|
|
data->host_cookie = 0;
|
|
}
|
|
|
|
static void dw_mci_post_req(struct mmc_host *mmc,
|
|
struct mmc_request *mrq,
|
|
int err)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct mmc_data *data = mrq->data;
|
|
|
|
if (!slot->host->use_dma || !data)
|
|
return;
|
|
|
|
if (data->host_cookie)
|
|
dma_unmap_sg(slot->host->dev,
|
|
data->sg,
|
|
data->sg_len,
|
|
dw_mci_get_dma_dir(data));
|
|
data->host_cookie = 0;
|
|
}
|
|
|
|
static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
unsigned int blksz = data->blksz;
|
|
const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
|
|
u32 fifo_width = 1 << host->data_shift;
|
|
u32 blksz_depth = blksz / fifo_width, fifoth_val;
|
|
u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
|
|
int idx = ARRAY_SIZE(mszs) - 1;
|
|
|
|
/* pio should ship this scenario */
|
|
if (!host->use_dma)
|
|
return;
|
|
|
|
tx_wmark = (host->fifo_depth) / 2;
|
|
tx_wmark_invers = host->fifo_depth - tx_wmark;
|
|
|
|
/*
|
|
* MSIZE is '1',
|
|
* if blksz is not a multiple of the FIFO width
|
|
*/
|
|
if (blksz % fifo_width) {
|
|
msize = 0;
|
|
rx_wmark = 1;
|
|
goto done;
|
|
}
|
|
|
|
do {
|
|
if (!((blksz_depth % mszs[idx]) ||
|
|
(tx_wmark_invers % mszs[idx]))) {
|
|
msize = idx;
|
|
rx_wmark = mszs[idx] - 1;
|
|
break;
|
|
}
|
|
} while (--idx > 0);
|
|
/*
|
|
* If idx is '0', it won't be tried
|
|
* Thus, initial values are uesed
|
|
*/
|
|
done:
|
|
fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
|
|
mci_writel(host, FIFOTH, fifoth_val);
|
|
}
|
|
|
|
static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
unsigned int blksz = data->blksz;
|
|
u32 blksz_depth, fifo_depth;
|
|
u16 thld_size;
|
|
|
|
WARN_ON(!(data->flags & MMC_DATA_READ));
|
|
|
|
/*
|
|
* CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
|
|
* in the FIFO region, so we really shouldn't access it).
|
|
*/
|
|
if (host->verid < DW_MMC_240A)
|
|
return;
|
|
|
|
if (host->timing != MMC_TIMING_MMC_HS200 &&
|
|
host->timing != MMC_TIMING_MMC_HS400 &&
|
|
host->timing != MMC_TIMING_UHS_SDR104)
|
|
goto disable;
|
|
|
|
blksz_depth = blksz / (1 << host->data_shift);
|
|
fifo_depth = host->fifo_depth;
|
|
|
|
if (blksz_depth > fifo_depth)
|
|
goto disable;
|
|
|
|
/*
|
|
* If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
|
|
* If (blksz_depth) < (fifo_depth >> 1), should be thld_size = blksz
|
|
* Currently just choose blksz.
|
|
*/
|
|
thld_size = blksz;
|
|
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
|
|
return;
|
|
|
|
disable:
|
|
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
|
|
}
|
|
|
|
static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
unsigned long irqflags;
|
|
int sg_len;
|
|
u32 temp;
|
|
|
|
host->using_dma = 0;
|
|
|
|
/* If we don't have a channel, we can't do DMA */
|
|
if (!host->use_dma)
|
|
return -ENODEV;
|
|
|
|
sg_len = dw_mci_pre_dma_transfer(host, data, 0);
|
|
if (sg_len < 0) {
|
|
host->dma_ops->stop(host);
|
|
return sg_len;
|
|
}
|
|
|
|
host->using_dma = 1;
|
|
|
|
if (host->use_dma == TRANS_MODE_IDMAC)
|
|
dev_vdbg(host->dev,
|
|
"sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
|
|
(unsigned long)host->sg_cpu,
|
|
(unsigned long)host->sg_dma,
|
|
sg_len);
|
|
|
|
/*
|
|
* Decide the MSIZE and RX/TX Watermark.
|
|
* If current block size is same with previous size,
|
|
* no need to update fifoth.
|
|
*/
|
|
if (host->prev_blksz != data->blksz)
|
|
dw_mci_adjust_fifoth(host, data);
|
|
|
|
/* Enable the DMA interface */
|
|
temp = mci_readl(host, CTRL);
|
|
temp |= SDMMC_CTRL_DMA_ENABLE;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/* Disable RX/TX IRQs, let DMA handle it */
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
temp = mci_readl(host, INTMASK);
|
|
temp &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
|
|
mci_writel(host, INTMASK, temp);
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
|
|
if (host->dma_ops->start(host, sg_len)) {
|
|
/* We can't do DMA */
|
|
dev_err(host->dev, "%s: failed to start DMA.\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
unsigned long irqflags;
|
|
int flags = SG_MITER_ATOMIC;
|
|
u32 temp;
|
|
|
|
data->error = -EINPROGRESS;
|
|
|
|
WARN_ON(host->data);
|
|
host->sg = NULL;
|
|
host->data = data;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
host->dir_status = DW_MCI_RECV_STATUS;
|
|
dw_mci_ctrl_rd_thld(host, data);
|
|
} else {
|
|
host->dir_status = DW_MCI_SEND_STATUS;
|
|
}
|
|
|
|
if (dw_mci_submit_data_dma(host, data)) {
|
|
if (host->data->flags & MMC_DATA_READ)
|
|
flags |= SG_MITER_TO_SG;
|
|
else
|
|
flags |= SG_MITER_FROM_SG;
|
|
|
|
sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
|
|
host->sg = data->sg;
|
|
host->part_buf_start = 0;
|
|
host->part_buf_count = 0;
|
|
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
|
|
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
temp = mci_readl(host, INTMASK);
|
|
temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
|
|
mci_writel(host, INTMASK, temp);
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
|
|
temp = mci_readl(host, CTRL);
|
|
temp &= ~SDMMC_CTRL_DMA_ENABLE;
|
|
mci_writel(host, CTRL, temp);
|
|
|
|
/*
|
|
* Use the initial fifoth_val for PIO mode.
|
|
* If next issued data may be transfered by DMA mode,
|
|
* prev_blksz should be invalidated.
|
|
*/
|
|
mci_writel(host, FIFOTH, host->fifoth_val);
|
|
host->prev_blksz = 0;
|
|
} else {
|
|
/*
|
|
* Keep the current block size.
|
|
* It will be used to decide whether to update
|
|
* fifoth register next time.
|
|
*/
|
|
host->prev_blksz = data->blksz;
|
|
}
|
|
}
|
|
|
|
static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
unsigned int cmd_status = 0;
|
|
|
|
mci_writel(host, CMDARG, arg);
|
|
wmb(); /* drain writebuffer */
|
|
dw_mci_wait_while_busy(host, cmd);
|
|
mci_writel(host, CMD, SDMMC_CMD_START | cmd);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
cmd_status = mci_readl(host, CMD);
|
|
if (!(cmd_status & SDMMC_CMD_START))
|
|
return;
|
|
}
|
|
dev_err(&slot->mmc->class_dev,
|
|
"Timeout sending command (cmd %#x arg %#x status %#x)\n",
|
|
cmd, arg, cmd_status);
|
|
}
|
|
|
|
static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
|
|
{
|
|
struct dw_mci *host = slot->host;
|
|
unsigned int clock = slot->clock;
|
|
u32 div;
|
|
u32 clk_en_a;
|
|
u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
|
|
|
|
/* We must continue to set bit 28 in CMD until the change is complete */
|
|
if (host->state == STATE_WAITING_CMD11_DONE)
|
|
sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
|
|
|
|
if (!clock) {
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
|
|
} else if (clock != host->current_speed || force_clkinit) {
|
|
div = host->bus_hz / clock;
|
|
if (host->bus_hz % clock && host->bus_hz > clock)
|
|
/*
|
|
* move the + 1 after the divide to prevent
|
|
* over-clocking the card.
|
|
*/
|
|
div += 1;
|
|
|
|
div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
|
|
|
|
if ((clock << div) != slot->__clk_old || force_clkinit)
|
|
dev_info(&slot->mmc->class_dev,
|
|
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
|
|
slot->id, host->bus_hz, clock,
|
|
div ? ((host->bus_hz / div) >> 1) :
|
|
host->bus_hz, div);
|
|
|
|
/* disable clock */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
|
|
|
|
/* set clock to desired speed */
|
|
mci_writel(host, CLKDIV, div);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
|
|
|
|
/* enable clock; only low power if no SDIO */
|
|
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
|
|
if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags))
|
|
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
|
|
mci_writel(host, CLKENA, clk_en_a);
|
|
|
|
/* inform CIU */
|
|
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
|
|
|
|
/* keep the clock with reflecting clock dividor */
|
|
slot->__clk_old = clock << div;
|
|
}
|
|
|
|
host->current_speed = clock;
|
|
|
|
/* Set the current slot bus width */
|
|
mci_writel(host, CTYPE, (slot->ctype << slot->id));
|
|
}
|
|
|
|
static void __dw_mci_start_request(struct dw_mci *host,
|
|
struct dw_mci_slot *slot,
|
|
struct mmc_command *cmd)
|
|
{
|
|
struct mmc_request *mrq;
|
|
struct mmc_data *data;
|
|
u32 cmdflags;
|
|
|
|
mrq = slot->mrq;
|
|
|
|
host->cur_slot = slot;
|
|
host->mrq = mrq;
|
|
|
|
host->pending_events = 0;
|
|
host->completed_events = 0;
|
|
host->cmd_status = 0;
|
|
host->data_status = 0;
|
|
host->dir_status = 0;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
mci_writel(host, TMOUT, 0xFFFFFFFF);
|
|
mci_writel(host, BYTCNT, data->blksz*data->blocks);
|
|
mci_writel(host, BLKSIZ, data->blksz);
|
|
}
|
|
|
|
cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
|
|
|
|
/* this is the first command, send the initialization clock */
|
|
if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
|
|
cmdflags |= SDMMC_CMD_INIT;
|
|
|
|
if (data) {
|
|
dw_mci_submit_data(host, data);
|
|
wmb(); /* drain writebuffer */
|
|
}
|
|
|
|
dw_mci_start_command(host, cmd, cmdflags);
|
|
|
|
if (cmd->opcode == SD_SWITCH_VOLTAGE) {
|
|
unsigned long irqflags;
|
|
|
|
/*
|
|
* Databook says to fail after 2ms w/ no response, but evidence
|
|
* shows that sometimes the cmd11 interrupt takes over 130ms.
|
|
* We'll set to 500ms, plus an extra jiffy just in case jiffies
|
|
* is just about to roll over.
|
|
*
|
|
* We do this whole thing under spinlock and only if the
|
|
* command hasn't already completed (indicating the the irq
|
|
* already ran so we don't want the timeout).
|
|
*/
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
|
|
mod_timer(&host->cmd11_timer,
|
|
jiffies + msecs_to_jiffies(500) + 1);
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
}
|
|
|
|
if (mrq->stop)
|
|
host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
|
|
else
|
|
host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
|
|
}
|
|
|
|
static void dw_mci_start_request(struct dw_mci *host,
|
|
struct dw_mci_slot *slot)
|
|
{
|
|
struct mmc_request *mrq = slot->mrq;
|
|
struct mmc_command *cmd;
|
|
|
|
cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
|
|
__dw_mci_start_request(host, slot, cmd);
|
|
}
|
|
|
|
/* must be called with host->lock held */
|
|
static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
|
|
struct mmc_request *mrq)
|
|
{
|
|
dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
|
|
host->state);
|
|
|
|
slot->mrq = mrq;
|
|
|
|
if (host->state == STATE_WAITING_CMD11_DONE) {
|
|
dev_warn(&slot->mmc->class_dev,
|
|
"Voltage change didn't complete\n");
|
|
/*
|
|
* this case isn't expected to happen, so we can
|
|
* either crash here or just try to continue on
|
|
* in the closest possible state
|
|
*/
|
|
host->state = STATE_IDLE;
|
|
}
|
|
|
|
if (host->state == STATE_IDLE) {
|
|
host->state = STATE_SENDING_CMD;
|
|
dw_mci_start_request(host, slot);
|
|
} else {
|
|
list_add_tail(&slot->queue_node, &host->queue);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
|
|
WARN_ON(slot->mrq);
|
|
|
|
/*
|
|
* The check for card presence and queueing of the request must be
|
|
* atomic, otherwise the card could be removed in between and the
|
|
* request wouldn't fail until another card was inserted.
|
|
*/
|
|
spin_lock_bh(&host->lock);
|
|
|
|
if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
|
|
spin_unlock_bh(&host->lock);
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
dw_mci_queue_request(host, slot, mrq);
|
|
|
|
spin_unlock_bh(&host->lock);
|
|
}
|
|
|
|
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
|
|
u32 regs;
|
|
int ret;
|
|
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_4:
|
|
slot->ctype = SDMMC_CTYPE_4BIT;
|
|
break;
|
|
case MMC_BUS_WIDTH_8:
|
|
slot->ctype = SDMMC_CTYPE_8BIT;
|
|
break;
|
|
default:
|
|
/* set default 1 bit mode */
|
|
slot->ctype = SDMMC_CTYPE_1BIT;
|
|
}
|
|
|
|
regs = mci_readl(slot->host, UHS_REG);
|
|
|
|
/* DDR mode set */
|
|
if (ios->timing == MMC_TIMING_MMC_DDR52 ||
|
|
ios->timing == MMC_TIMING_UHS_DDR50 ||
|
|
ios->timing == MMC_TIMING_MMC_HS400)
|
|
regs |= ((0x1 << slot->id) << 16);
|
|
else
|
|
regs &= ~((0x1 << slot->id) << 16);
|
|
|
|
mci_writel(slot->host, UHS_REG, regs);
|
|
slot->host->timing = ios->timing;
|
|
|
|
/*
|
|
* Use mirror of ios->clock to prevent race with mmc
|
|
* core ios update when finding the minimum.
|
|
*/
|
|
slot->clock = ios->clock;
|
|
|
|
if (drv_data && drv_data->set_ios)
|
|
drv_data->set_ios(slot->host, ios);
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_UP:
|
|
if (!IS_ERR(mmc->supply.vmmc)) {
|
|
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
|
|
ios->vdd);
|
|
if (ret) {
|
|
dev_err(slot->host->dev,
|
|
"failed to enable vmmc regulator\n");
|
|
/*return, if failed turn on vmmc*/
|
|
return;
|
|
}
|
|
}
|
|
set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
|
|
regs = mci_readl(slot->host, PWREN);
|
|
regs |= (1 << slot->id);
|
|
mci_writel(slot->host, PWREN, regs);
|
|
break;
|
|
case MMC_POWER_ON:
|
|
if (!slot->host->vqmmc_enabled) {
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = regulator_enable(mmc->supply.vqmmc);
|
|
if (ret < 0)
|
|
dev_err(slot->host->dev,
|
|
"failed to enable vqmmc\n");
|
|
else
|
|
slot->host->vqmmc_enabled = true;
|
|
|
|
} else {
|
|
/* Keep track so we don't reset again */
|
|
slot->host->vqmmc_enabled = true;
|
|
}
|
|
|
|
/* Reset our state machine after powering on */
|
|
dw_mci_ctrl_reset(slot->host,
|
|
SDMMC_CTRL_ALL_RESET_FLAGS);
|
|
}
|
|
|
|
/* Adjust clock / bus width after power is up */
|
|
dw_mci_setup_bus(slot, false);
|
|
|
|
break;
|
|
case MMC_POWER_OFF:
|
|
/* Turn clock off before power goes down */
|
|
dw_mci_setup_bus(slot, false);
|
|
|
|
if (!IS_ERR(mmc->supply.vmmc))
|
|
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
|
|
regulator_disable(mmc->supply.vqmmc);
|
|
slot->host->vqmmc_enabled = false;
|
|
|
|
regs = mci_readl(slot->host, PWREN);
|
|
regs &= ~(1 << slot->id);
|
|
mci_writel(slot->host, PWREN, regs);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
|
|
slot->host->state = STATE_IDLE;
|
|
}
|
|
|
|
static int dw_mci_card_busy(struct mmc_host *mmc)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
u32 status;
|
|
|
|
/*
|
|
* Check the busy bit which is low when DAT[3:0]
|
|
* (the data lines) are 0000
|
|
*/
|
|
status = mci_readl(slot->host, STATUS);
|
|
|
|
return !!(status & SDMMC_STATUS_BUSY);
|
|
}
|
|
|
|
static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
u32 uhs;
|
|
u32 v18 = SDMMC_UHS_18V << slot->id;
|
|
int ret;
|
|
|
|
if (drv_data && drv_data->switch_voltage)
|
|
return drv_data->switch_voltage(mmc, ios);
|
|
|
|
/*
|
|
* Program the voltage. Note that some instances of dw_mmc may use
|
|
* the UHS_REG for this. For other instances (like exynos) the UHS_REG
|
|
* does no harm but you need to set the regulator directly. Try both.
|
|
*/
|
|
uhs = mci_readl(host, UHS_REG);
|
|
if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
|
|
uhs &= ~v18;
|
|
else
|
|
uhs |= v18;
|
|
|
|
if (!IS_ERR(mmc->supply.vqmmc)) {
|
|
ret = mmc_regulator_set_vqmmc(mmc, ios);
|
|
|
|
if (ret) {
|
|
dev_dbg(&mmc->class_dev,
|
|
"Regulator set error %d - %s V\n",
|
|
ret, uhs & v18 ? "1.8" : "3.3");
|
|
return ret;
|
|
}
|
|
}
|
|
mci_writel(host, UHS_REG, uhs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
int read_only;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
int gpio_ro = mmc_gpio_get_ro(mmc);
|
|
|
|
/* Use platform get_ro function, else try on board write protect */
|
|
if (!IS_ERR_VALUE(gpio_ro))
|
|
read_only = gpio_ro;
|
|
else
|
|
read_only =
|
|
mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
|
|
|
|
dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
read_only ? "read-only" : "read-write");
|
|
|
|
return read_only;
|
|
}
|
|
|
|
static int dw_mci_get_cd(struct mmc_host *mmc)
|
|
{
|
|
int present;
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci_board *brd = slot->host->pdata;
|
|
struct dw_mci *host = slot->host;
|
|
int gpio_cd = mmc_gpio_get_cd(mmc);
|
|
|
|
/* Use platform get_cd function, else try onboard card detect */
|
|
if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
|
|
(mmc->caps & MMC_CAP_NONREMOVABLE))
|
|
present = 1;
|
|
else if (!IS_ERR_VALUE(gpio_cd))
|
|
present = gpio_cd;
|
|
else
|
|
present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
|
|
== 0 ? 1 : 0;
|
|
|
|
spin_lock_bh(&host->lock);
|
|
if (present) {
|
|
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
dev_dbg(&mmc->class_dev, "card is present\n");
|
|
} else {
|
|
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
dev_dbg(&mmc->class_dev, "card is not present\n");
|
|
}
|
|
spin_unlock_bh(&host->lock);
|
|
|
|
return present;
|
|
}
|
|
|
|
static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
|
|
/*
|
|
* Low power mode will stop the card clock when idle. According to the
|
|
* description of the CLKENA register we should disable low power mode
|
|
* for SDIO cards if we need SDIO interrupts to work.
|
|
*/
|
|
if (mmc->caps & MMC_CAP_SDIO_IRQ) {
|
|
const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
|
|
u32 clk_en_a_old;
|
|
u32 clk_en_a;
|
|
|
|
clk_en_a_old = mci_readl(host, CLKENA);
|
|
|
|
if (card->type == MMC_TYPE_SDIO ||
|
|
card->type == MMC_TYPE_SD_COMBO) {
|
|
set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
|
|
clk_en_a = clk_en_a_old & ~clken_low_pwr;
|
|
} else {
|
|
clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
|
|
clk_en_a = clk_en_a_old | clken_low_pwr;
|
|
}
|
|
|
|
if (clk_en_a != clk_en_a_old) {
|
|
mci_writel(host, CLKENA, clk_en_a);
|
|
mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
|
|
SDMMC_CMD_PRV_DAT_WAIT, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
unsigned long irqflags;
|
|
u32 int_mask;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
|
|
/* Enable/disable Slot Specific SDIO interrupt */
|
|
int_mask = mci_readl(host, INTMASK);
|
|
if (enb)
|
|
int_mask |= SDMMC_INT_SDIO(slot->sdio_id);
|
|
else
|
|
int_mask &= ~SDMMC_INT_SDIO(slot->sdio_id);
|
|
mci_writel(host, INTMASK, int_mask);
|
|
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
}
|
|
|
|
static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int err = -EINVAL;
|
|
|
|
if (drv_data && drv_data->execute_tuning)
|
|
err = drv_data->execute_tuning(slot, opcode);
|
|
return err;
|
|
}
|
|
|
|
static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc,
|
|
struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_slot *slot = mmc_priv(mmc);
|
|
struct dw_mci *host = slot->host;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
|
|
if (drv_data && drv_data->prepare_hs400_tuning)
|
|
return drv_data->prepare_hs400_tuning(host, ios);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_host_ops dw_mci_ops = {
|
|
.request = dw_mci_request,
|
|
.pre_req = dw_mci_pre_req,
|
|
.post_req = dw_mci_post_req,
|
|
.set_ios = dw_mci_set_ios,
|
|
.get_ro = dw_mci_get_ro,
|
|
.get_cd = dw_mci_get_cd,
|
|
.enable_sdio_irq = dw_mci_enable_sdio_irq,
|
|
.execute_tuning = dw_mci_execute_tuning,
|
|
.card_busy = dw_mci_card_busy,
|
|
.start_signal_voltage_switch = dw_mci_switch_voltage,
|
|
.init_card = dw_mci_init_card,
|
|
.prepare_hs400_tuning = dw_mci_prepare_hs400_tuning,
|
|
};
|
|
|
|
static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
|
|
__releases(&host->lock)
|
|
__acquires(&host->lock)
|
|
{
|
|
struct dw_mci_slot *slot;
|
|
struct mmc_host *prev_mmc = host->cur_slot->mmc;
|
|
|
|
WARN_ON(host->cmd || host->data);
|
|
|
|
host->cur_slot->mrq = NULL;
|
|
host->mrq = NULL;
|
|
if (!list_empty(&host->queue)) {
|
|
slot = list_entry(host->queue.next,
|
|
struct dw_mci_slot, queue_node);
|
|
list_del(&slot->queue_node);
|
|
dev_vdbg(host->dev, "list not empty: %s is next\n",
|
|
mmc_hostname(slot->mmc));
|
|
host->state = STATE_SENDING_CMD;
|
|
dw_mci_start_request(host, slot);
|
|
} else {
|
|
dev_vdbg(host->dev, "list empty\n");
|
|
|
|
if (host->state == STATE_SENDING_CMD11)
|
|
host->state = STATE_WAITING_CMD11_DONE;
|
|
else
|
|
host->state = STATE_IDLE;
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
mmc_request_done(prev_mmc, mrq);
|
|
spin_lock(&host->lock);
|
|
}
|
|
|
|
static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
|
|
{
|
|
u32 status = host->cmd_status;
|
|
|
|
host->cmd_status = 0;
|
|
|
|
/* Read the response from the card (up to 16 bytes) */
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
cmd->resp[3] = mci_readl(host, RESP0);
|
|
cmd->resp[2] = mci_readl(host, RESP1);
|
|
cmd->resp[1] = mci_readl(host, RESP2);
|
|
cmd->resp[0] = mci_readl(host, RESP3);
|
|
} else {
|
|
cmd->resp[0] = mci_readl(host, RESP0);
|
|
cmd->resp[1] = 0;
|
|
cmd->resp[2] = 0;
|
|
cmd->resp[3] = 0;
|
|
}
|
|
}
|
|
|
|
if (status & SDMMC_INT_RTO)
|
|
cmd->error = -ETIMEDOUT;
|
|
else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
|
|
cmd->error = -EILSEQ;
|
|
else if (status & SDMMC_INT_RESP_ERR)
|
|
cmd->error = -EIO;
|
|
else
|
|
cmd->error = 0;
|
|
|
|
if (cmd->error) {
|
|
/* newer ip versions need a delay between retries */
|
|
if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
|
|
mdelay(20);
|
|
}
|
|
|
|
return cmd->error;
|
|
}
|
|
|
|
static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
|
|
{
|
|
u32 status = host->data_status;
|
|
|
|
if (status & DW_MCI_DATA_ERROR_FLAGS) {
|
|
if (status & SDMMC_INT_DRTO) {
|
|
data->error = -ETIMEDOUT;
|
|
} else if (status & SDMMC_INT_DCRC) {
|
|
data->error = -EILSEQ;
|
|
} else if (status & SDMMC_INT_EBE) {
|
|
if (host->dir_status ==
|
|
DW_MCI_SEND_STATUS) {
|
|
/*
|
|
* No data CRC status was returned.
|
|
* The number of bytes transferred
|
|
* will be exaggerated in PIO mode.
|
|
*/
|
|
data->bytes_xfered = 0;
|
|
data->error = -ETIMEDOUT;
|
|
} else if (host->dir_status ==
|
|
DW_MCI_RECV_STATUS) {
|
|
data->error = -EIO;
|
|
}
|
|
} else {
|
|
/* SDMMC_INT_SBE is included */
|
|
data->error = -EIO;
|
|
}
|
|
|
|
dev_dbg(host->dev, "data error, status 0x%08x\n", status);
|
|
|
|
/*
|
|
* After an error, there may be data lingering
|
|
* in the FIFO
|
|
*/
|
|
dw_mci_reset(host);
|
|
} else {
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
data->error = 0;
|
|
}
|
|
|
|
return data->error;
|
|
}
|
|
|
|
static void dw_mci_set_drto(struct dw_mci *host)
|
|
{
|
|
unsigned int drto_clks;
|
|
unsigned int drto_ms;
|
|
|
|
drto_clks = mci_readl(host, TMOUT) >> 8;
|
|
drto_ms = DIV_ROUND_UP(drto_clks, host->bus_hz / 1000);
|
|
|
|
/* add a bit spare time */
|
|
drto_ms += 10;
|
|
|
|
mod_timer(&host->dto_timer, jiffies + msecs_to_jiffies(drto_ms));
|
|
}
|
|
|
|
static void dw_mci_tasklet_func(unsigned long priv)
|
|
{
|
|
struct dw_mci *host = (struct dw_mci *)priv;
|
|
struct mmc_data *data;
|
|
struct mmc_command *cmd;
|
|
struct mmc_request *mrq;
|
|
enum dw_mci_state state;
|
|
enum dw_mci_state prev_state;
|
|
unsigned int err;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
state = host->state;
|
|
data = host->data;
|
|
mrq = host->mrq;
|
|
|
|
do {
|
|
prev_state = state;
|
|
|
|
switch (state) {
|
|
case STATE_IDLE:
|
|
case STATE_WAITING_CMD11_DONE:
|
|
break;
|
|
|
|
case STATE_SENDING_CMD11:
|
|
case STATE_SENDING_CMD:
|
|
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
cmd = host->cmd;
|
|
host->cmd = NULL;
|
|
set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
|
|
err = dw_mci_command_complete(host, cmd);
|
|
if (cmd == mrq->sbc && !err) {
|
|
prev_state = state = STATE_SENDING_CMD;
|
|
__dw_mci_start_request(host, host->cur_slot,
|
|
mrq->cmd);
|
|
goto unlock;
|
|
}
|
|
|
|
if (cmd->data && err) {
|
|
dw_mci_stop_dma(host);
|
|
send_stop_abort(host, data);
|
|
state = STATE_SENDING_STOP;
|
|
break;
|
|
}
|
|
|
|
if (!cmd->data || err) {
|
|
dw_mci_request_end(host, mrq);
|
|
goto unlock;
|
|
}
|
|
|
|
prev_state = state = STATE_SENDING_DATA;
|
|
/* fall through */
|
|
|
|
case STATE_SENDING_DATA:
|
|
/*
|
|
* We could get a data error and never a transfer
|
|
* complete so we'd better check for it here.
|
|
*
|
|
* Note that we don't really care if we also got a
|
|
* transfer complete; stopping the DMA and sending an
|
|
* abort won't hurt.
|
|
*/
|
|
if (test_and_clear_bit(EVENT_DATA_ERROR,
|
|
&host->pending_events)) {
|
|
dw_mci_stop_dma(host);
|
|
if (data->stop ||
|
|
!(host->data_status & (SDMMC_INT_DRTO |
|
|
SDMMC_INT_EBE)))
|
|
send_stop_abort(host, data);
|
|
state = STATE_DATA_ERROR;
|
|
break;
|
|
}
|
|
|
|
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
|
|
&host->pending_events)) {
|
|
/*
|
|
* If all data-related interrupts don't come
|
|
* within the given time in reading data state.
|
|
*/
|
|
if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
|
|
(host->dir_status == DW_MCI_RECV_STATUS))
|
|
dw_mci_set_drto(host);
|
|
break;
|
|
}
|
|
|
|
set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
|
|
|
|
/*
|
|
* Handle an EVENT_DATA_ERROR that might have shown up
|
|
* before the transfer completed. This might not have
|
|
* been caught by the check above because the interrupt
|
|
* could have gone off between the previous check and
|
|
* the check for transfer complete.
|
|
*
|
|
* Technically this ought not be needed assuming we
|
|
* get a DATA_COMPLETE eventually (we'll notice the
|
|
* error and end the request), but it shouldn't hurt.
|
|
*
|
|
* This has the advantage of sending the stop command.
|
|
*/
|
|
if (test_and_clear_bit(EVENT_DATA_ERROR,
|
|
&host->pending_events)) {
|
|
dw_mci_stop_dma(host);
|
|
if (data->stop ||
|
|
!(host->data_status & (SDMMC_INT_DRTO |
|
|
SDMMC_INT_EBE)))
|
|
send_stop_abort(host, data);
|
|
state = STATE_DATA_ERROR;
|
|
break;
|
|
}
|
|
prev_state = state = STATE_DATA_BUSY;
|
|
|
|
/* fall through */
|
|
|
|
case STATE_DATA_BUSY:
|
|
if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
|
|
&host->pending_events)) {
|
|
/*
|
|
* If data error interrupt comes but data over
|
|
* interrupt doesn't come within the given time.
|
|
* in reading data state.
|
|
*/
|
|
if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
|
|
(host->dir_status == DW_MCI_RECV_STATUS))
|
|
dw_mci_set_drto(host);
|
|
break;
|
|
}
|
|
|
|
host->data = NULL;
|
|
set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
|
|
err = dw_mci_data_complete(host, data);
|
|
|
|
if (!err) {
|
|
if (!data->stop || mrq->sbc) {
|
|
if (mrq->sbc && data->stop)
|
|
data->stop->error = 0;
|
|
dw_mci_request_end(host, mrq);
|
|
goto unlock;
|
|
}
|
|
|
|
/* stop command for open-ended transfer*/
|
|
if (data->stop)
|
|
send_stop_abort(host, data);
|
|
} else {
|
|
/*
|
|
* If we don't have a command complete now we'll
|
|
* never get one since we just reset everything;
|
|
* better end the request.
|
|
*
|
|
* If we do have a command complete we'll fall
|
|
* through to the SENDING_STOP command and
|
|
* everything will be peachy keen.
|
|
*/
|
|
if (!test_bit(EVENT_CMD_COMPLETE,
|
|
&host->pending_events)) {
|
|
host->cmd = NULL;
|
|
dw_mci_request_end(host, mrq);
|
|
goto unlock;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If err has non-zero,
|
|
* stop-abort command has been already issued.
|
|
*/
|
|
prev_state = state = STATE_SENDING_STOP;
|
|
|
|
/* fall through */
|
|
|
|
case STATE_SENDING_STOP:
|
|
if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
/* CMD error in data command */
|
|
if (mrq->cmd->error && mrq->data)
|
|
dw_mci_reset(host);
|
|
|
|
host->cmd = NULL;
|
|
host->data = NULL;
|
|
|
|
if (mrq->stop)
|
|
dw_mci_command_complete(host, mrq->stop);
|
|
else
|
|
host->cmd_status = 0;
|
|
|
|
dw_mci_request_end(host, mrq);
|
|
goto unlock;
|
|
|
|
case STATE_DATA_ERROR:
|
|
if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
|
|
&host->pending_events))
|
|
break;
|
|
|
|
state = STATE_DATA_BUSY;
|
|
break;
|
|
}
|
|
} while (state != prev_state);
|
|
|
|
host->state = state;
|
|
unlock:
|
|
spin_unlock(&host->lock);
|
|
|
|
}
|
|
|
|
/* push final bytes to part_buf, only use during push */
|
|
static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
memcpy((void *)&host->part_buf, buf, cnt);
|
|
host->part_buf_count = cnt;
|
|
}
|
|
|
|
/* append bytes to part_buf, only use during push */
|
|
static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
|
|
memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
|
|
host->part_buf_count += cnt;
|
|
return cnt;
|
|
}
|
|
|
|
/* pull first bytes from part_buf, only use during pull */
|
|
static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
cnt = min_t(int, cnt, host->part_buf_count);
|
|
if (cnt) {
|
|
memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
|
|
cnt);
|
|
host->part_buf_count -= cnt;
|
|
host->part_buf_start += cnt;
|
|
}
|
|
return cnt;
|
|
}
|
|
|
|
/* pull final bytes from the part_buf, assuming it's just been filled */
|
|
static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
memcpy(buf, &host->part_buf, cnt);
|
|
host->part_buf_start = cnt;
|
|
host->part_buf_count = (1 << host->data_shift) - cnt;
|
|
}
|
|
|
|
static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
|
|
buf += len;
|
|
cnt -= len;
|
|
if (host->part_buf_count == 2) {
|
|
mci_fifo_writew(host->fifo_reg, host->part_buf16);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x1)) {
|
|
while (cnt >= 2) {
|
|
u16 aligned_buf[64];
|
|
int len = min(cnt & -2, (int)sizeof(aligned_buf));
|
|
int items = len >> 1;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_fifo_writew(host->fifo_reg, aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u16 *pdata = buf;
|
|
|
|
for (; cnt >= 2; cnt -= 2)
|
|
mci_fifo_writew(host->fifo_reg, *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_fifo_writew(host->fifo_reg, host->part_buf16);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x1)) {
|
|
while (cnt >= 2) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u16 aligned_buf[64];
|
|
int len = min(cnt & -2, (int)sizeof(aligned_buf));
|
|
int items = len >> 1;
|
|
int i;
|
|
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_fifo_readw(host->fifo_reg);
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u16 *pdata = buf;
|
|
|
|
for (; cnt >= 2; cnt -= 2)
|
|
*pdata++ = mci_fifo_readw(host->fifo_reg);
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf16 = mci_fifo_readw(host->fifo_reg);
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
|
|
buf += len;
|
|
cnt -= len;
|
|
if (host->part_buf_count == 4) {
|
|
mci_fifo_writel(host->fifo_reg, host->part_buf32);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x3)) {
|
|
while (cnt >= 4) {
|
|
u32 aligned_buf[32];
|
|
int len = min(cnt & -4, (int)sizeof(aligned_buf));
|
|
int items = len >> 2;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_fifo_writel(host->fifo_reg, aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u32 *pdata = buf;
|
|
|
|
for (; cnt >= 4; cnt -= 4)
|
|
mci_fifo_writel(host->fifo_reg, *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_fifo_writel(host->fifo_reg, host->part_buf32);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x3)) {
|
|
while (cnt >= 4) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u32 aligned_buf[32];
|
|
int len = min(cnt & -4, (int)sizeof(aligned_buf));
|
|
int items = len >> 2;
|
|
int i;
|
|
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_fifo_readl(host->fifo_reg);
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u32 *pdata = buf;
|
|
|
|
for (; cnt >= 4; cnt -= 4)
|
|
*pdata++ = mci_fifo_readl(host->fifo_reg);
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf32 = mci_fifo_readl(host->fifo_reg);
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
struct mmc_data *data = host->data;
|
|
int init_cnt = cnt;
|
|
|
|
/* try and push anything in the part_buf */
|
|
if (unlikely(host->part_buf_count)) {
|
|
int len = dw_mci_push_part_bytes(host, buf, cnt);
|
|
|
|
buf += len;
|
|
cnt -= len;
|
|
|
|
if (host->part_buf_count == 8) {
|
|
mci_fifo_writeq(host->fifo_reg, host->part_buf);
|
|
host->part_buf_count = 0;
|
|
}
|
|
}
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x7)) {
|
|
while (cnt >= 8) {
|
|
u64 aligned_buf[16];
|
|
int len = min(cnt & -8, (int)sizeof(aligned_buf));
|
|
int items = len >> 3;
|
|
int i;
|
|
/* memcpy from input buffer into aligned buffer */
|
|
memcpy(aligned_buf, buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
/* push data from aligned buffer into fifo */
|
|
for (i = 0; i < items; ++i)
|
|
mci_fifo_writeq(host->fifo_reg, aligned_buf[i]);
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u64 *pdata = buf;
|
|
|
|
for (; cnt >= 8; cnt -= 8)
|
|
mci_fifo_writeq(host->fifo_reg, *pdata++);
|
|
buf = pdata;
|
|
}
|
|
/* put anything remaining in the part_buf */
|
|
if (cnt) {
|
|
dw_mci_set_part_bytes(host, buf, cnt);
|
|
/* Push data if we have reached the expected data length */
|
|
if ((data->bytes_xfered + init_cnt) ==
|
|
(data->blksz * data->blocks))
|
|
mci_fifo_writeq(host->fifo_reg, host->part_buf);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
|
|
if (unlikely((unsigned long)buf & 0x7)) {
|
|
while (cnt >= 8) {
|
|
/* pull data from fifo into aligned buffer */
|
|
u64 aligned_buf[16];
|
|
int len = min(cnt & -8, (int)sizeof(aligned_buf));
|
|
int items = len >> 3;
|
|
int i;
|
|
|
|
for (i = 0; i < items; ++i)
|
|
aligned_buf[i] = mci_fifo_readq(host->fifo_reg);
|
|
|
|
/* memcpy from aligned buffer into output buffer */
|
|
memcpy(buf, aligned_buf, len);
|
|
buf += len;
|
|
cnt -= len;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
u64 *pdata = buf;
|
|
|
|
for (; cnt >= 8; cnt -= 8)
|
|
*pdata++ = mci_fifo_readq(host->fifo_reg);
|
|
buf = pdata;
|
|
}
|
|
if (cnt) {
|
|
host->part_buf = mci_fifo_readq(host->fifo_reg);
|
|
dw_mci_pull_final_bytes(host, buf, cnt);
|
|
}
|
|
}
|
|
|
|
static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
|
|
{
|
|
int len;
|
|
|
|
/* get remaining partial bytes */
|
|
len = dw_mci_pull_part_bytes(host, buf, cnt);
|
|
if (unlikely(len == cnt))
|
|
return;
|
|
buf += len;
|
|
cnt -= len;
|
|
|
|
/* get the rest of the data */
|
|
host->pull_data(host, buf, cnt);
|
|
}
|
|
|
|
static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
|
|
{
|
|
struct sg_mapping_iter *sg_miter = &host->sg_miter;
|
|
void *buf;
|
|
unsigned int offset;
|
|
struct mmc_data *data = host->data;
|
|
int shift = host->data_shift;
|
|
u32 status;
|
|
unsigned int len;
|
|
unsigned int remain, fcnt;
|
|
|
|
do {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
|
|
host->sg = sg_miter->piter.sg;
|
|
buf = sg_miter->addr;
|
|
remain = sg_miter->length;
|
|
offset = 0;
|
|
|
|
do {
|
|
fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
|
|
<< shift) + host->part_buf_count;
|
|
len = min(remain, fcnt);
|
|
if (!len)
|
|
break;
|
|
dw_mci_pull_data(host, (void *)(buf + offset), len);
|
|
data->bytes_xfered += len;
|
|
offset += len;
|
|
remain -= len;
|
|
} while (remain);
|
|
|
|
sg_miter->consumed = offset;
|
|
status = mci_readl(host, MINTSTS);
|
|
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
|
|
/* if the RXDR is ready read again */
|
|
} while ((status & SDMMC_INT_RXDR) ||
|
|
(dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
|
|
|
|
if (!remain) {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
sg_miter->consumed = 0;
|
|
}
|
|
sg_miter_stop(sg_miter);
|
|
return;
|
|
|
|
done:
|
|
sg_miter_stop(sg_miter);
|
|
host->sg = NULL;
|
|
smp_wmb(); /* drain writebuffer */
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
static void dw_mci_write_data_pio(struct dw_mci *host)
|
|
{
|
|
struct sg_mapping_iter *sg_miter = &host->sg_miter;
|
|
void *buf;
|
|
unsigned int offset;
|
|
struct mmc_data *data = host->data;
|
|
int shift = host->data_shift;
|
|
u32 status;
|
|
unsigned int len;
|
|
unsigned int fifo_depth = host->fifo_depth;
|
|
unsigned int remain, fcnt;
|
|
|
|
do {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
|
|
host->sg = sg_miter->piter.sg;
|
|
buf = sg_miter->addr;
|
|
remain = sg_miter->length;
|
|
offset = 0;
|
|
|
|
do {
|
|
fcnt = ((fifo_depth -
|
|
SDMMC_GET_FCNT(mci_readl(host, STATUS)))
|
|
<< shift) - host->part_buf_count;
|
|
len = min(remain, fcnt);
|
|
if (!len)
|
|
break;
|
|
host->push_data(host, (void *)(buf + offset), len);
|
|
data->bytes_xfered += len;
|
|
offset += len;
|
|
remain -= len;
|
|
} while (remain);
|
|
|
|
sg_miter->consumed = offset;
|
|
status = mci_readl(host, MINTSTS);
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
|
|
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
|
|
|
|
if (!remain) {
|
|
if (!sg_miter_next(sg_miter))
|
|
goto done;
|
|
sg_miter->consumed = 0;
|
|
}
|
|
sg_miter_stop(sg_miter);
|
|
return;
|
|
|
|
done:
|
|
sg_miter_stop(sg_miter);
|
|
host->sg = NULL;
|
|
smp_wmb(); /* drain writebuffer */
|
|
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
|
|
{
|
|
if (!host->cmd_status)
|
|
host->cmd_status = status;
|
|
|
|
smp_wmb(); /* drain writebuffer */
|
|
|
|
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
static void dw_mci_handle_cd(struct dw_mci *host)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
|
|
if (!slot)
|
|
continue;
|
|
|
|
if (slot->mmc->ops->card_event)
|
|
slot->mmc->ops->card_event(slot->mmc);
|
|
mmc_detect_change(slot->mmc,
|
|
msecs_to_jiffies(host->pdata->detect_delay_ms));
|
|
}
|
|
}
|
|
|
|
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct dw_mci *host = dev_id;
|
|
u32 pending;
|
|
int i;
|
|
|
|
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
|
|
|
|
/*
|
|
* DTO fix - version 2.10a and below, and only if internal DMA
|
|
* is configured.
|
|
*/
|
|
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
|
|
if (!pending &&
|
|
((mci_readl(host, STATUS) >> 17) & 0x1fff))
|
|
pending |= SDMMC_INT_DATA_OVER;
|
|
}
|
|
|
|
if (pending) {
|
|
/* Check volt switch first, since it can look like an error */
|
|
if ((host->state == STATE_SENDING_CMD11) &&
|
|
(pending & SDMMC_INT_VOLT_SWITCH)) {
|
|
unsigned long irqflags;
|
|
|
|
mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
|
|
pending &= ~SDMMC_INT_VOLT_SWITCH;
|
|
|
|
/*
|
|
* Hold the lock; we know cmd11_timer can't be kicked
|
|
* off after the lock is released, so safe to delete.
|
|
*/
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
dw_mci_cmd_interrupt(host, pending);
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
|
|
del_timer(&host->cmd11_timer);
|
|
}
|
|
|
|
if (pending & DW_MCI_CMD_ERROR_FLAGS) {
|
|
mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
|
|
host->cmd_status = pending;
|
|
smp_wmb(); /* drain writebuffer */
|
|
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
|
|
}
|
|
|
|
if (pending & DW_MCI_DATA_ERROR_FLAGS) {
|
|
/* if there is an error report DATA_ERROR */
|
|
mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
|
|
host->data_status = pending;
|
|
smp_wmb(); /* drain writebuffer */
|
|
set_bit(EVENT_DATA_ERROR, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_DATA_OVER) {
|
|
if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
|
|
del_timer(&host->dto_timer);
|
|
|
|
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
|
|
if (!host->data_status)
|
|
host->data_status = pending;
|
|
smp_wmb(); /* drain writebuffer */
|
|
if (host->dir_status == DW_MCI_RECV_STATUS) {
|
|
if (host->sg != NULL)
|
|
dw_mci_read_data_pio(host, true);
|
|
}
|
|
set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_RXDR) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
|
|
if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
|
|
dw_mci_read_data_pio(host, false);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_TXDR) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
|
|
if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
|
|
dw_mci_write_data_pio(host);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_CMD_DONE) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
|
|
dw_mci_cmd_interrupt(host, pending);
|
|
}
|
|
|
|
if (pending & SDMMC_INT_CD) {
|
|
mci_writel(host, RINTSTS, SDMMC_INT_CD);
|
|
dw_mci_handle_cd(host);
|
|
}
|
|
|
|
/* Handle SDIO Interrupts */
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
|
|
if (!slot)
|
|
continue;
|
|
|
|
if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
|
|
mci_writel(host, RINTSTS,
|
|
SDMMC_INT_SDIO(slot->sdio_id));
|
|
mmc_signal_sdio_irq(slot->mmc);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
if (host->use_dma != TRANS_MODE_IDMAC)
|
|
return IRQ_HANDLED;
|
|
|
|
/* Handle IDMA interrupts */
|
|
if (host->dma_64bit_address == 1) {
|
|
pending = mci_readl(host, IDSTS64);
|
|
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
|
|
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
|
|
SDMMC_IDMAC_INT_RI);
|
|
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
|
|
host->dma_ops->complete((void *)host);
|
|
}
|
|
} else {
|
|
pending = mci_readl(host, IDSTS);
|
|
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
|
|
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
|
|
SDMMC_IDMAC_INT_RI);
|
|
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
|
|
host->dma_ops->complete((void *)host);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
/* given a slot, find out the device node representing that slot */
|
|
static struct device_node *dw_mci_of_find_slot_node(struct dw_mci_slot *slot)
|
|
{
|
|
struct device *dev = slot->mmc->parent;
|
|
struct device_node *np;
|
|
const __be32 *addr;
|
|
int len;
|
|
|
|
if (!dev || !dev->of_node)
|
|
return NULL;
|
|
|
|
for_each_child_of_node(dev->of_node, np) {
|
|
addr = of_get_property(np, "reg", &len);
|
|
if (!addr || (len < sizeof(int)))
|
|
continue;
|
|
if (be32_to_cpup(addr) == slot->id)
|
|
return np;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
|
|
{
|
|
struct device_node *np = dw_mci_of_find_slot_node(slot);
|
|
|
|
if (!np)
|
|
return;
|
|
|
|
if (of_property_read_bool(np, "disable-wp")) {
|
|
slot->mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
|
|
dev_warn(slot->mmc->parent,
|
|
"Slot quirk 'disable-wp' is deprecated\n");
|
|
}
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static void dw_mci_slot_of_parse(struct dw_mci_slot *slot)
|
|
{
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct dw_mci_slot *slot;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int ctrl_id, ret;
|
|
u32 freq[2];
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
|
|
slot = mmc_priv(mmc);
|
|
slot->id = id;
|
|
slot->sdio_id = host->sdio_id0 + id;
|
|
slot->mmc = mmc;
|
|
slot->host = host;
|
|
host->slot[id] = slot;
|
|
|
|
mmc->ops = &dw_mci_ops;
|
|
if (of_property_read_u32_array(host->dev->of_node,
|
|
"clock-freq-min-max", freq, 2)) {
|
|
mmc->f_min = DW_MCI_FREQ_MIN;
|
|
mmc->f_max = DW_MCI_FREQ_MAX;
|
|
} else {
|
|
mmc->f_min = freq[0];
|
|
mmc->f_max = freq[1];
|
|
}
|
|
|
|
/*if there are external regulators, get them*/
|
|
ret = mmc_regulator_get_supply(mmc);
|
|
if (ret == -EPROBE_DEFER)
|
|
goto err_host_allocated;
|
|
|
|
if (!mmc->ocr_avail)
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
if (host->pdata->caps)
|
|
mmc->caps = host->pdata->caps;
|
|
|
|
if (host->pdata->pm_caps)
|
|
mmc->pm_caps = host->pdata->pm_caps;
|
|
|
|
if (host->dev->of_node) {
|
|
ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
|
|
if (ctrl_id < 0)
|
|
ctrl_id = 0;
|
|
} else {
|
|
ctrl_id = to_platform_device(host->dev)->id;
|
|
}
|
|
if (drv_data && drv_data->caps)
|
|
mmc->caps |= drv_data->caps[ctrl_id];
|
|
|
|
if (host->pdata->caps2)
|
|
mmc->caps2 = host->pdata->caps2;
|
|
|
|
dw_mci_slot_of_parse(slot);
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
if (ret)
|
|
goto err_host_allocated;
|
|
|
|
/* Useful defaults if platform data is unset. */
|
|
if (host->use_dma == TRANS_MODE_IDMAC) {
|
|
mmc->max_segs = host->ring_size;
|
|
mmc->max_blk_size = 65536;
|
|
mmc->max_seg_size = 0x1000;
|
|
mmc->max_req_size = mmc->max_seg_size * host->ring_size;
|
|
mmc->max_blk_count = mmc->max_req_size / 512;
|
|
} else if (host->use_dma == TRANS_MODE_EDMAC) {
|
|
mmc->max_segs = 64;
|
|
mmc->max_blk_size = 65536;
|
|
mmc->max_blk_count = 65535;
|
|
mmc->max_req_size =
|
|
mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
} else {
|
|
/* TRANS_MODE_PIO */
|
|
mmc->max_segs = 64;
|
|
mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
|
|
mmc->max_blk_count = 512;
|
|
mmc->max_req_size = mmc->max_blk_size *
|
|
mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
}
|
|
|
|
if (dw_mci_get_cd(mmc))
|
|
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
else
|
|
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
|
|
|
|
ret = mmc_add_host(mmc);
|
|
if (ret)
|
|
goto err_host_allocated;
|
|
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
dw_mci_init_debugfs(slot);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
err_host_allocated:
|
|
mmc_free_host(mmc);
|
|
return ret;
|
|
}
|
|
|
|
static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
|
|
{
|
|
/* Debugfs stuff is cleaned up by mmc core */
|
|
mmc_remove_host(slot->mmc);
|
|
slot->host->slot[id] = NULL;
|
|
mmc_free_host(slot->mmc);
|
|
}
|
|
|
|
static void dw_mci_init_dma(struct dw_mci *host)
|
|
{
|
|
int addr_config;
|
|
struct device *dev = host->dev;
|
|
struct device_node *np = dev->of_node;
|
|
|
|
/*
|
|
* Check tansfer mode from HCON[17:16]
|
|
* Clear the ambiguous description of dw_mmc databook:
|
|
* 2b'00: No DMA Interface -> Actually means using Internal DMA block
|
|
* 2b'01: DesignWare DMA Interface -> Synopsys DW-DMA block
|
|
* 2b'10: Generic DMA Interface -> non-Synopsys generic DMA block
|
|
* 2b'11: Non DW DMA Interface -> pio only
|
|
* Compared to DesignWare DMA Interface, Generic DMA Interface has a
|
|
* simpler request/acknowledge handshake mechanism and both of them
|
|
* are regarded as external dma master for dw_mmc.
|
|
*/
|
|
host->use_dma = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON));
|
|
if (host->use_dma == DMA_INTERFACE_IDMA) {
|
|
host->use_dma = TRANS_MODE_IDMAC;
|
|
} else if (host->use_dma == DMA_INTERFACE_DWDMA ||
|
|
host->use_dma == DMA_INTERFACE_GDMA) {
|
|
host->use_dma = TRANS_MODE_EDMAC;
|
|
} else {
|
|
goto no_dma;
|
|
}
|
|
|
|
/* Determine which DMA interface to use */
|
|
if (host->use_dma == TRANS_MODE_IDMAC) {
|
|
/*
|
|
* Check ADDR_CONFIG bit in HCON to find
|
|
* IDMAC address bus width
|
|
*/
|
|
addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON));
|
|
|
|
if (addr_config == 1) {
|
|
/* host supports IDMAC in 64-bit address mode */
|
|
host->dma_64bit_address = 1;
|
|
dev_info(host->dev,
|
|
"IDMAC supports 64-bit address mode.\n");
|
|
if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
|
|
dma_set_coherent_mask(host->dev,
|
|
DMA_BIT_MASK(64));
|
|
} else {
|
|
/* host supports IDMAC in 32-bit address mode */
|
|
host->dma_64bit_address = 0;
|
|
dev_info(host->dev,
|
|
"IDMAC supports 32-bit address mode.\n");
|
|
}
|
|
|
|
/* Alloc memory for sg translation */
|
|
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
|
|
&host->sg_dma, GFP_KERNEL);
|
|
if (!host->sg_cpu) {
|
|
dev_err(host->dev,
|
|
"%s: could not alloc DMA memory\n",
|
|
__func__);
|
|
goto no_dma;
|
|
}
|
|
|
|
host->dma_ops = &dw_mci_idmac_ops;
|
|
dev_info(host->dev, "Using internal DMA controller.\n");
|
|
} else {
|
|
/* TRANS_MODE_EDMAC: check dma bindings again */
|
|
if ((of_property_count_strings(np, "dma-names") < 0) ||
|
|
(!of_find_property(np, "dmas", NULL))) {
|
|
goto no_dma;
|
|
}
|
|
host->dma_ops = &dw_mci_edmac_ops;
|
|
dev_info(host->dev, "Using external DMA controller.\n");
|
|
}
|
|
|
|
if (host->dma_ops->init && host->dma_ops->start &&
|
|
host->dma_ops->stop && host->dma_ops->cleanup) {
|
|
if (host->dma_ops->init(host)) {
|
|
dev_err(host->dev, "%s: Unable to initialize DMA Controller.\n",
|
|
__func__);
|
|
goto no_dma;
|
|
}
|
|
} else {
|
|
dev_err(host->dev, "DMA initialization not found.\n");
|
|
goto no_dma;
|
|
}
|
|
|
|
return;
|
|
|
|
no_dma:
|
|
dev_info(host->dev, "Using PIO mode.\n");
|
|
host->use_dma = TRANS_MODE_PIO;
|
|
}
|
|
|
|
static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
u32 ctrl;
|
|
|
|
ctrl = mci_readl(host, CTRL);
|
|
ctrl |= reset;
|
|
mci_writel(host, CTRL, ctrl);
|
|
|
|
/* wait till resets clear */
|
|
do {
|
|
ctrl = mci_readl(host, CTRL);
|
|
if (!(ctrl & reset))
|
|
return true;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
dev_err(host->dev,
|
|
"Timeout resetting block (ctrl reset %#x)\n",
|
|
ctrl & reset);
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool dw_mci_reset(struct dw_mci *host)
|
|
{
|
|
u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
|
|
bool ret = false;
|
|
|
|
/*
|
|
* Reseting generates a block interrupt, hence setting
|
|
* the scatter-gather pointer to NULL.
|
|
*/
|
|
if (host->sg) {
|
|
sg_miter_stop(&host->sg_miter);
|
|
host->sg = NULL;
|
|
}
|
|
|
|
if (host->use_dma)
|
|
flags |= SDMMC_CTRL_DMA_RESET;
|
|
|
|
if (dw_mci_ctrl_reset(host, flags)) {
|
|
/*
|
|
* In all cases we clear the RAWINTS register to clear any
|
|
* interrupts.
|
|
*/
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
|
|
/* if using dma we wait for dma_req to clear */
|
|
if (host->use_dma) {
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(500);
|
|
u32 status;
|
|
|
|
do {
|
|
status = mci_readl(host, STATUS);
|
|
if (!(status & SDMMC_STATUS_DMA_REQ))
|
|
break;
|
|
cpu_relax();
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
if (status & SDMMC_STATUS_DMA_REQ) {
|
|
dev_err(host->dev,
|
|
"%s: Timeout waiting for dma_req to clear during reset\n",
|
|
__func__);
|
|
goto ciu_out;
|
|
}
|
|
|
|
/* when using DMA next we reset the fifo again */
|
|
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
|
|
goto ciu_out;
|
|
}
|
|
} else {
|
|
/* if the controller reset bit did clear, then set clock regs */
|
|
if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
|
|
dev_err(host->dev,
|
|
"%s: fifo/dma reset bits didn't clear but ciu was reset, doing clock update\n",
|
|
__func__);
|
|
goto ciu_out;
|
|
}
|
|
}
|
|
|
|
if (host->use_dma == TRANS_MODE_IDMAC)
|
|
/* It is also recommended that we reset and reprogram idmac */
|
|
dw_mci_idmac_reset(host);
|
|
|
|
ret = true;
|
|
|
|
ciu_out:
|
|
/* After a CTRL reset we need to have CIU set clock registers */
|
|
mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void dw_mci_cmd11_timer(unsigned long arg)
|
|
{
|
|
struct dw_mci *host = (struct dw_mci *)arg;
|
|
|
|
if (host->state != STATE_SENDING_CMD11) {
|
|
dev_warn(host->dev, "Unexpected CMD11 timeout\n");
|
|
return;
|
|
}
|
|
|
|
host->cmd_status = SDMMC_INT_RTO;
|
|
set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
static void dw_mci_dto_timer(unsigned long arg)
|
|
{
|
|
struct dw_mci *host = (struct dw_mci *)arg;
|
|
|
|
switch (host->state) {
|
|
case STATE_SENDING_DATA:
|
|
case STATE_DATA_BUSY:
|
|
/*
|
|
* If DTO interrupt does NOT come in sending data state,
|
|
* we should notify the driver to terminate current transfer
|
|
* and report a data timeout to the core.
|
|
*/
|
|
host->data_status = SDMMC_INT_DRTO;
|
|
set_bit(EVENT_DATA_ERROR, &host->pending_events);
|
|
set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
|
|
tasklet_schedule(&host->tasklet);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct dw_mci_of_quirks {
|
|
char *quirk;
|
|
int id;
|
|
} of_quirks[] = {
|
|
{
|
|
.quirk = "broken-cd",
|
|
.id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
|
|
},
|
|
};
|
|
|
|
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_board *pdata;
|
|
struct device *dev = host->dev;
|
|
struct device_node *np = dev->of_node;
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int idx, ret;
|
|
u32 clock_frequency;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/* find out number of slots supported */
|
|
if (of_property_read_u32(dev->of_node, "num-slots",
|
|
&pdata->num_slots)) {
|
|
dev_info(dev,
|
|
"num-slots property not found, assuming 1 slot is available\n");
|
|
pdata->num_slots = 1;
|
|
}
|
|
|
|
/* get quirks */
|
|
for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
|
|
if (of_get_property(np, of_quirks[idx].quirk, NULL))
|
|
pdata->quirks |= of_quirks[idx].id;
|
|
|
|
if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
|
|
dev_info(dev,
|
|
"fifo-depth property not found, using value of FIFOTH register as default\n");
|
|
|
|
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
|
|
|
|
if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
|
|
pdata->bus_hz = clock_frequency;
|
|
|
|
if (drv_data && drv_data->parse_dt) {
|
|
ret = drv_data->parse_dt(host);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
if (of_find_property(np, "supports-highspeed", NULL)) {
|
|
dev_info(dev, "supports-highspeed property is deprecated.\n");
|
|
pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
|
|
}
|
|
|
|
return pdata;
|
|
}
|
|
|
|
#else /* CONFIG_OF */
|
|
static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
|
|
{
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static void dw_mci_enable_cd(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_board *brd = host->pdata;
|
|
unsigned long irqflags;
|
|
u32 temp;
|
|
int i;
|
|
|
|
/* No need for CD if broken card detection */
|
|
if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
|
|
return;
|
|
|
|
/* No need for CD if all slots have a non-error GPIO */
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
|
|
if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
|
|
break;
|
|
}
|
|
if (i == host->num_slots)
|
|
return;
|
|
|
|
spin_lock_irqsave(&host->irq_lock, irqflags);
|
|
temp = mci_readl(host, INTMASK);
|
|
temp |= SDMMC_INT_CD;
|
|
mci_writel(host, INTMASK, temp);
|
|
spin_unlock_irqrestore(&host->irq_lock, irqflags);
|
|
}
|
|
|
|
int dw_mci_probe(struct dw_mci *host)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data = host->drv_data;
|
|
int width, i, ret = 0;
|
|
u32 fifo_size;
|
|
int init_slots = 0;
|
|
|
|
if (!host->pdata) {
|
|
host->pdata = dw_mci_parse_dt(host);
|
|
if (IS_ERR(host->pdata)) {
|
|
dev_err(host->dev, "platform data not available\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (host->pdata->num_slots < 1) {
|
|
dev_err(host->dev,
|
|
"Platform data must supply num_slots.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
host->biu_clk = devm_clk_get(host->dev, "biu");
|
|
if (IS_ERR(host->biu_clk)) {
|
|
dev_dbg(host->dev, "biu clock not available\n");
|
|
} else {
|
|
ret = clk_prepare_enable(host->biu_clk);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to enable biu clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
host->ciu_clk = devm_clk_get(host->dev, "ciu");
|
|
if (IS_ERR(host->ciu_clk)) {
|
|
dev_dbg(host->dev, "ciu clock not available\n");
|
|
host->bus_hz = host->pdata->bus_hz;
|
|
} else {
|
|
ret = clk_prepare_enable(host->ciu_clk);
|
|
if (ret) {
|
|
dev_err(host->dev, "failed to enable ciu clock\n");
|
|
goto err_clk_biu;
|
|
}
|
|
|
|
if (host->pdata->bus_hz) {
|
|
ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
|
|
if (ret)
|
|
dev_warn(host->dev,
|
|
"Unable to set bus rate to %uHz\n",
|
|
host->pdata->bus_hz);
|
|
}
|
|
host->bus_hz = clk_get_rate(host->ciu_clk);
|
|
}
|
|
|
|
if (!host->bus_hz) {
|
|
dev_err(host->dev,
|
|
"Platform data must supply bus speed\n");
|
|
ret = -ENODEV;
|
|
goto err_clk_ciu;
|
|
}
|
|
|
|
if (drv_data && drv_data->init) {
|
|
ret = drv_data->init(host);
|
|
if (ret) {
|
|
dev_err(host->dev,
|
|
"implementation specific init failed\n");
|
|
goto err_clk_ciu;
|
|
}
|
|
}
|
|
|
|
if (drv_data && drv_data->setup_clock) {
|
|
ret = drv_data->setup_clock(host);
|
|
if (ret) {
|
|
dev_err(host->dev,
|
|
"implementation specific clock setup failed\n");
|
|
goto err_clk_ciu;
|
|
}
|
|
}
|
|
|
|
setup_timer(&host->cmd11_timer,
|
|
dw_mci_cmd11_timer, (unsigned long)host);
|
|
|
|
host->quirks = host->pdata->quirks;
|
|
|
|
if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
|
|
setup_timer(&host->dto_timer,
|
|
dw_mci_dto_timer, (unsigned long)host);
|
|
|
|
spin_lock_init(&host->lock);
|
|
spin_lock_init(&host->irq_lock);
|
|
INIT_LIST_HEAD(&host->queue);
|
|
|
|
/*
|
|
* Get the host data width - this assumes that HCON has been set with
|
|
* the correct values.
|
|
*/
|
|
i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON));
|
|
if (!i) {
|
|
host->push_data = dw_mci_push_data16;
|
|
host->pull_data = dw_mci_pull_data16;
|
|
width = 16;
|
|
host->data_shift = 1;
|
|
} else if (i == 2) {
|
|
host->push_data = dw_mci_push_data64;
|
|
host->pull_data = dw_mci_pull_data64;
|
|
width = 64;
|
|
host->data_shift = 3;
|
|
} else {
|
|
/* Check for a reserved value, and warn if it is */
|
|
WARN((i != 1),
|
|
"HCON reports a reserved host data width!\n"
|
|
"Defaulting to 32-bit access.\n");
|
|
host->push_data = dw_mci_push_data32;
|
|
host->pull_data = dw_mci_pull_data32;
|
|
width = 32;
|
|
host->data_shift = 2;
|
|
}
|
|
|
|
/* Reset all blocks */
|
|
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
|
|
return -ENODEV;
|
|
|
|
host->dma_ops = host->pdata->dma_ops;
|
|
dw_mci_init_dma(host);
|
|
|
|
/* Clear the interrupts for the host controller */
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
|
|
|
|
/* Put in max timeout */
|
|
mci_writel(host, TMOUT, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* FIFO threshold settings RxMark = fifo_size / 2 - 1,
|
|
* Tx Mark = fifo_size / 2 DMA Size = 8
|
|
*/
|
|
if (!host->pdata->fifo_depth) {
|
|
/*
|
|
* Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
|
|
* have been overwritten by the bootloader, just like we're
|
|
* about to do, so if you know the value for your hardware, you
|
|
* should put it in the platform data.
|
|
*/
|
|
fifo_size = mci_readl(host, FIFOTH);
|
|
fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
|
|
} else {
|
|
fifo_size = host->pdata->fifo_depth;
|
|
}
|
|
host->fifo_depth = fifo_size;
|
|
host->fifoth_val =
|
|
SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
|
|
mci_writel(host, FIFOTH, host->fifoth_val);
|
|
|
|
/* disable clock to CIU */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
/*
|
|
* In 2.40a spec, Data offset is changed.
|
|
* Need to check the version-id and set data-offset for DATA register.
|
|
*/
|
|
host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
|
|
dev_info(host->dev, "Version ID is %04x\n", host->verid);
|
|
|
|
if (host->verid < DW_MMC_240A)
|
|
host->fifo_reg = host->regs + DATA_OFFSET;
|
|
else
|
|
host->fifo_reg = host->regs + DATA_240A_OFFSET;
|
|
|
|
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
|
|
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
|
|
host->irq_flags, "dw-mci", host);
|
|
if (ret)
|
|
goto err_dmaunmap;
|
|
|
|
if (host->pdata->num_slots)
|
|
host->num_slots = host->pdata->num_slots;
|
|
else
|
|
host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON));
|
|
|
|
/*
|
|
* Enable interrupts for command done, data over, data empty,
|
|
* receive ready and error such as transmit, receive timeout, crc error
|
|
*/
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
|
|
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
|
|
DW_MCI_ERROR_FLAGS);
|
|
/* Enable mci interrupt */
|
|
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
|
|
|
|
dev_info(host->dev,
|
|
"DW MMC controller at irq %d,%d bit host data width,%u deep fifo\n",
|
|
host->irq, width, fifo_size);
|
|
|
|
/* We need at least one slot to succeed */
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
ret = dw_mci_init_slot(host, i);
|
|
if (ret)
|
|
dev_dbg(host->dev, "slot %d init failed\n", i);
|
|
else
|
|
init_slots++;
|
|
}
|
|
|
|
if (init_slots) {
|
|
dev_info(host->dev, "%d slots initialized\n", init_slots);
|
|
} else {
|
|
dev_dbg(host->dev,
|
|
"attempted to initialize %d slots, but failed on all\n",
|
|
host->num_slots);
|
|
goto err_dmaunmap;
|
|
}
|
|
|
|
/* Now that slots are all setup, we can enable card detect */
|
|
dw_mci_enable_cd(host);
|
|
|
|
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
|
|
dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
|
|
|
|
return 0;
|
|
|
|
err_dmaunmap:
|
|
if (host->use_dma && host->dma_ops->exit)
|
|
host->dma_ops->exit(host);
|
|
|
|
err_clk_ciu:
|
|
if (!IS_ERR(host->ciu_clk))
|
|
clk_disable_unprepare(host->ciu_clk);
|
|
|
|
err_clk_biu:
|
|
if (!IS_ERR(host->biu_clk))
|
|
clk_disable_unprepare(host->biu_clk);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_probe);
|
|
|
|
void dw_mci_remove(struct dw_mci *host)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
dev_dbg(host->dev, "remove slot %d\n", i);
|
|
if (host->slot[i])
|
|
dw_mci_cleanup_slot(host->slot[i], i);
|
|
}
|
|
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
|
|
|
|
/* disable clock to CIU */
|
|
mci_writel(host, CLKENA, 0);
|
|
mci_writel(host, CLKSRC, 0);
|
|
|
|
if (host->use_dma && host->dma_ops->exit)
|
|
host->dma_ops->exit(host);
|
|
|
|
if (!IS_ERR(host->ciu_clk))
|
|
clk_disable_unprepare(host->ciu_clk);
|
|
|
|
if (!IS_ERR(host->biu_clk))
|
|
clk_disable_unprepare(host->biu_clk);
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_remove);
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* TODO: we should probably disable the clock to the card in the suspend path.
|
|
*/
|
|
int dw_mci_suspend(struct dw_mci *host)
|
|
{
|
|
if (host->use_dma && host->dma_ops->exit)
|
|
host->dma_ops->exit(host);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_suspend);
|
|
|
|
int dw_mci_resume(struct dw_mci *host)
|
|
{
|
|
int i, ret;
|
|
|
|
if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
|
|
ret = -ENODEV;
|
|
return ret;
|
|
}
|
|
|
|
if (host->use_dma && host->dma_ops->init)
|
|
host->dma_ops->init(host);
|
|
|
|
/*
|
|
* Restore the initial value at FIFOTH register
|
|
* And Invalidate the prev_blksz with zero
|
|
*/
|
|
mci_writel(host, FIFOTH, host->fifoth_val);
|
|
host->prev_blksz = 0;
|
|
|
|
/* Put in max timeout */
|
|
mci_writel(host, TMOUT, 0xFFFFFFFF);
|
|
|
|
mci_writel(host, RINTSTS, 0xFFFFFFFF);
|
|
mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
|
|
SDMMC_INT_TXDR | SDMMC_INT_RXDR |
|
|
DW_MCI_ERROR_FLAGS);
|
|
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
|
|
|
|
for (i = 0; i < host->num_slots; i++) {
|
|
struct dw_mci_slot *slot = host->slot[i];
|
|
|
|
if (!slot)
|
|
continue;
|
|
if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
|
|
dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
|
|
dw_mci_setup_bus(slot, true);
|
|
}
|
|
}
|
|
|
|
/* Now that slots are all setup, we can enable card detect */
|
|
dw_mci_enable_cd(host);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(dw_mci_resume);
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static int __init dw_mci_init(void)
|
|
{
|
|
pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __exit dw_mci_exit(void)
|
|
{
|
|
}
|
|
|
|
module_init(dw_mci_init);
|
|
module_exit(dw_mci_exit);
|
|
|
|
MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
|
|
MODULE_AUTHOR("NXP Semiconductor VietNam");
|
|
MODULE_AUTHOR("Imagination Technologies Ltd");
|
|
MODULE_LICENSE("GPL v2");
|