952 lines
22 KiB
C
952 lines
22 KiB
C
/*
|
|
* Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/usb.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* Version Information */
|
|
#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
|
|
#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
|
|
#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
|
|
|
|
#define IDR 0x0120
|
|
#define MAR 0x0126
|
|
#define CR 0x012e
|
|
#define TCR 0x012f
|
|
#define RCR 0x0130
|
|
#define TSR 0x0132
|
|
#define RSR 0x0133
|
|
#define CON0 0x0135
|
|
#define CON1 0x0136
|
|
#define MSR 0x0137
|
|
#define PHYADD 0x0138
|
|
#define PHYDAT 0x0139
|
|
#define PHYCNT 0x013b
|
|
#define GPPC 0x013d
|
|
#define BMCR 0x0140
|
|
#define BMSR 0x0142
|
|
#define ANAR 0x0144
|
|
#define ANLP 0x0146
|
|
#define AER 0x0148
|
|
#define CSCR 0x014C /* This one has the link status */
|
|
#define CSCR_LINK_STATUS (1 << 3)
|
|
|
|
#define IDR_EEPROM 0x1202
|
|
|
|
#define PHY_READ 0
|
|
#define PHY_WRITE 0x20
|
|
#define PHY_GO 0x40
|
|
|
|
#define MII_TIMEOUT 10
|
|
#define INTBUFSIZE 8
|
|
|
|
#define RTL8150_REQT_READ 0xc0
|
|
#define RTL8150_REQT_WRITE 0x40
|
|
#define RTL8150_REQ_GET_REGS 0x05
|
|
#define RTL8150_REQ_SET_REGS 0x05
|
|
|
|
|
|
/* Transmit status register errors */
|
|
#define TSR_ECOL (1<<5)
|
|
#define TSR_LCOL (1<<4)
|
|
#define TSR_LOSS_CRS (1<<3)
|
|
#define TSR_JBR (1<<2)
|
|
#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
|
|
/* Receive status register errors */
|
|
#define RSR_CRC (1<<2)
|
|
#define RSR_FAE (1<<1)
|
|
#define RSR_ERRORS (RSR_CRC | RSR_FAE)
|
|
|
|
/* Media status register definitions */
|
|
#define MSR_DUPLEX (1<<4)
|
|
#define MSR_SPEED (1<<3)
|
|
#define MSR_LINK (1<<2)
|
|
|
|
/* Interrupt pipe data */
|
|
#define INT_TSR 0x00
|
|
#define INT_RSR 0x01
|
|
#define INT_MSR 0x02
|
|
#define INT_WAKSR 0x03
|
|
#define INT_TXOK_CNT 0x04
|
|
#define INT_RXLOST_CNT 0x05
|
|
#define INT_CRERR_CNT 0x06
|
|
#define INT_COL_CNT 0x07
|
|
|
|
|
|
#define RTL8150_MTU 1540
|
|
#define RTL8150_TX_TIMEOUT (HZ)
|
|
#define RX_SKB_POOL_SIZE 4
|
|
|
|
/* rtl8150 flags */
|
|
#define RTL8150_HW_CRC 0
|
|
#define RX_REG_SET 1
|
|
#define RTL8150_UNPLUG 2
|
|
#define RX_URB_FAIL 3
|
|
|
|
/* Define these values to match your device */
|
|
#define VENDOR_ID_REALTEK 0x0bda
|
|
#define VENDOR_ID_MELCO 0x0411
|
|
#define VENDOR_ID_MICRONET 0x3980
|
|
#define VENDOR_ID_LONGSHINE 0x07b8
|
|
#define VENDOR_ID_OQO 0x1557
|
|
#define VENDOR_ID_ZYXEL 0x0586
|
|
|
|
#define PRODUCT_ID_RTL8150 0x8150
|
|
#define PRODUCT_ID_LUAKTX 0x0012
|
|
#define PRODUCT_ID_LCS8138TX 0x401a
|
|
#define PRODUCT_ID_SP128AR 0x0003
|
|
#define PRODUCT_ID_PRESTIGE 0x401a
|
|
|
|
#undef EEPROM_WRITE
|
|
|
|
/* table of devices that work with this driver */
|
|
static struct usb_device_id rtl8150_table[] = {
|
|
{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
|
|
{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
|
|
{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
|
|
{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
|
|
{USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
|
|
{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, rtl8150_table);
|
|
|
|
struct rtl8150 {
|
|
unsigned long flags;
|
|
struct usb_device *udev;
|
|
struct tasklet_struct tl;
|
|
struct net_device *netdev;
|
|
struct urb *rx_urb, *tx_urb, *intr_urb;
|
|
struct sk_buff *tx_skb, *rx_skb;
|
|
struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
|
|
spinlock_t rx_pool_lock;
|
|
struct usb_ctrlrequest dr;
|
|
int intr_interval;
|
|
u8 *intr_buff;
|
|
u8 phy;
|
|
};
|
|
|
|
typedef struct rtl8150 rtl8150_t;
|
|
|
|
struct async_req {
|
|
struct usb_ctrlrequest dr;
|
|
u16 rx_creg;
|
|
};
|
|
|
|
static const char driver_name [] = "rtl8150";
|
|
|
|
/*
|
|
**
|
|
** device related part of the code
|
|
**
|
|
*/
|
|
static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
|
|
{
|
|
return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
|
|
RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
|
|
indx, 0, data, size, 500);
|
|
}
|
|
|
|
static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
|
|
{
|
|
return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
|
|
RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
|
|
indx, 0, data, size, 500);
|
|
}
|
|
|
|
static void async_set_reg_cb(struct urb *urb)
|
|
{
|
|
struct async_req *req = (struct async_req *)urb->context;
|
|
int status = urb->status;
|
|
|
|
if (status < 0)
|
|
dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
|
|
kfree(req);
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
|
|
{
|
|
int res = -ENOMEM;
|
|
struct urb *async_urb;
|
|
struct async_req *req;
|
|
|
|
req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
|
|
if (req == NULL)
|
|
return res;
|
|
async_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (async_urb == NULL) {
|
|
kfree(req);
|
|
return res;
|
|
}
|
|
req->rx_creg = cpu_to_le16(reg);
|
|
req->dr.bRequestType = RTL8150_REQT_WRITE;
|
|
req->dr.bRequest = RTL8150_REQ_SET_REGS;
|
|
req->dr.wIndex = 0;
|
|
req->dr.wValue = cpu_to_le16(indx);
|
|
req->dr.wLength = cpu_to_le16(size);
|
|
usb_fill_control_urb(async_urb, dev->udev,
|
|
usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
|
|
&req->rx_creg, size, async_set_reg_cb, req);
|
|
res = usb_submit_urb(async_urb, GFP_ATOMIC);
|
|
if (res) {
|
|
if (res == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
|
|
}
|
|
return res;
|
|
}
|
|
|
|
static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
|
|
{
|
|
int i;
|
|
u8 data[3], tmp;
|
|
|
|
data[0] = phy;
|
|
data[1] = data[2] = 0;
|
|
tmp = indx | PHY_READ | PHY_GO;
|
|
i = 0;
|
|
|
|
set_registers(dev, PHYADD, sizeof(data), data);
|
|
set_registers(dev, PHYCNT, 1, &tmp);
|
|
do {
|
|
get_registers(dev, PHYCNT, 1, data);
|
|
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
|
|
|
|
if (i <= MII_TIMEOUT) {
|
|
get_registers(dev, PHYDAT, 2, data);
|
|
*reg = data[0] | (data[1] << 8);
|
|
return 0;
|
|
} else
|
|
return 1;
|
|
}
|
|
|
|
static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
|
|
{
|
|
int i;
|
|
u8 data[3], tmp;
|
|
|
|
data[0] = phy;
|
|
data[1] = reg & 0xff;
|
|
data[2] = (reg >> 8) & 0xff;
|
|
tmp = indx | PHY_WRITE | PHY_GO;
|
|
i = 0;
|
|
|
|
set_registers(dev, PHYADD, sizeof(data), data);
|
|
set_registers(dev, PHYCNT, 1, &tmp);
|
|
do {
|
|
get_registers(dev, PHYCNT, 1, data);
|
|
} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
|
|
|
|
if (i <= MII_TIMEOUT)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
static inline void set_ethernet_addr(rtl8150_t * dev)
|
|
{
|
|
u8 node_id[6];
|
|
|
|
get_registers(dev, IDR, sizeof(node_id), node_id);
|
|
memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
|
|
}
|
|
|
|
static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
|
|
{
|
|
struct sockaddr *addr = p;
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
|
|
if (netif_running(netdev))
|
|
return -EBUSY;
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
netdev_dbg(netdev, "Setting MAC address to %pM\n", netdev->dev_addr);
|
|
/* Set the IDR registers. */
|
|
set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
|
|
#ifdef EEPROM_WRITE
|
|
{
|
|
int i;
|
|
u8 cr;
|
|
/* Get the CR contents. */
|
|
get_registers(dev, CR, 1, &cr);
|
|
/* Set the WEPROM bit (eeprom write enable). */
|
|
cr |= 0x20;
|
|
set_registers(dev, CR, 1, &cr);
|
|
/* Write the MAC address into eeprom. Eeprom writes must be word-sized,
|
|
so we need to split them up. */
|
|
for (i = 0; i * 2 < netdev->addr_len; i++) {
|
|
set_registers(dev, IDR_EEPROM + (i * 2), 2,
|
|
netdev->dev_addr + (i * 2));
|
|
}
|
|
/* Clear the WEPROM bit (preventing accidental eeprom writes). */
|
|
cr &= 0xdf;
|
|
set_registers(dev, CR, 1, &cr);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8150_reset(rtl8150_t * dev)
|
|
{
|
|
u8 data = 0x10;
|
|
int i = HZ;
|
|
|
|
set_registers(dev, CR, 1, &data);
|
|
do {
|
|
get_registers(dev, CR, 1, &data);
|
|
} while ((data & 0x10) && --i);
|
|
|
|
return (i > 0) ? 1 : 0;
|
|
}
|
|
|
|
static int alloc_all_urbs(rtl8150_t * dev)
|
|
{
|
|
dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->rx_urb)
|
|
return 0;
|
|
dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->tx_urb) {
|
|
usb_free_urb(dev->rx_urb);
|
|
return 0;
|
|
}
|
|
dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!dev->intr_urb) {
|
|
usb_free_urb(dev->rx_urb);
|
|
usb_free_urb(dev->tx_urb);
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void free_all_urbs(rtl8150_t * dev)
|
|
{
|
|
usb_free_urb(dev->rx_urb);
|
|
usb_free_urb(dev->tx_urb);
|
|
usb_free_urb(dev->intr_urb);
|
|
}
|
|
|
|
static void unlink_all_urbs(rtl8150_t * dev)
|
|
{
|
|
usb_kill_urb(dev->rx_urb);
|
|
usb_kill_urb(dev->tx_urb);
|
|
usb_kill_urb(dev->intr_urb);
|
|
}
|
|
|
|
static inline struct sk_buff *pull_skb(rtl8150_t *dev)
|
|
{
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
|
|
if (dev->rx_skb_pool[i]) {
|
|
skb = dev->rx_skb_pool[i];
|
|
dev->rx_skb_pool[i] = NULL;
|
|
return skb;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void read_bulk_callback(struct urb *urb)
|
|
{
|
|
rtl8150_t *dev;
|
|
unsigned pkt_len, res;
|
|
struct sk_buff *skb;
|
|
struct net_device *netdev;
|
|
u16 rx_stat;
|
|
int status = urb->status;
|
|
int result;
|
|
|
|
dev = urb->context;
|
|
if (!dev)
|
|
return;
|
|
if (test_bit(RTL8150_UNPLUG, &dev->flags))
|
|
return;
|
|
netdev = dev->netdev;
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
switch (status) {
|
|
case 0:
|
|
break;
|
|
case -ENOENT:
|
|
return; /* the urb is in unlink state */
|
|
case -ETIME:
|
|
if (printk_ratelimit())
|
|
dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
|
|
goto goon;
|
|
default:
|
|
if (printk_ratelimit())
|
|
dev_warn(&urb->dev->dev, "Rx status %d\n", status);
|
|
goto goon;
|
|
}
|
|
|
|
if (!dev->rx_skb)
|
|
goto resched;
|
|
/* protect against short packets (tell me why we got some?!?) */
|
|
if (urb->actual_length < 4)
|
|
goto goon;
|
|
|
|
res = urb->actual_length;
|
|
rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
|
|
pkt_len = res - 4;
|
|
|
|
skb_put(dev->rx_skb, pkt_len);
|
|
dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
|
|
netif_rx(dev->rx_skb);
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += pkt_len;
|
|
|
|
spin_lock(&dev->rx_pool_lock);
|
|
skb = pull_skb(dev);
|
|
spin_unlock(&dev->rx_pool_lock);
|
|
if (!skb)
|
|
goto resched;
|
|
|
|
dev->rx_skb = skb;
|
|
goon:
|
|
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
|
|
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
|
|
result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
|
|
if (result == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
else if (result) {
|
|
set_bit(RX_URB_FAIL, &dev->flags);
|
|
goto resched;
|
|
} else {
|
|
clear_bit(RX_URB_FAIL, &dev->flags);
|
|
}
|
|
|
|
return;
|
|
resched:
|
|
tasklet_schedule(&dev->tl);
|
|
}
|
|
|
|
static void write_bulk_callback(struct urb *urb)
|
|
{
|
|
rtl8150_t *dev;
|
|
int status = urb->status;
|
|
|
|
dev = urb->context;
|
|
if (!dev)
|
|
return;
|
|
dev_kfree_skb_irq(dev->tx_skb);
|
|
if (!netif_device_present(dev->netdev))
|
|
return;
|
|
if (status)
|
|
dev_info(&urb->dev->dev, "%s: Tx status %d\n",
|
|
dev->netdev->name, status);
|
|
dev->netdev->trans_start = jiffies;
|
|
netif_wake_queue(dev->netdev);
|
|
}
|
|
|
|
static void intr_callback(struct urb *urb)
|
|
{
|
|
rtl8150_t *dev;
|
|
__u8 *d;
|
|
int status = urb->status;
|
|
int res;
|
|
|
|
dev = urb->context;
|
|
if (!dev)
|
|
return;
|
|
switch (status) {
|
|
case 0: /* success */
|
|
break;
|
|
case -ECONNRESET: /* unlink */
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
/* -EPIPE: should clear the halt */
|
|
default:
|
|
dev_info(&urb->dev->dev, "%s: intr status %d\n",
|
|
dev->netdev->name, status);
|
|
goto resubmit;
|
|
}
|
|
|
|
d = urb->transfer_buffer;
|
|
if (d[0] & TSR_ERRORS) {
|
|
dev->netdev->stats.tx_errors++;
|
|
if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
|
|
dev->netdev->stats.tx_aborted_errors++;
|
|
if (d[INT_TSR] & TSR_LCOL)
|
|
dev->netdev->stats.tx_window_errors++;
|
|
if (d[INT_TSR] & TSR_LOSS_CRS)
|
|
dev->netdev->stats.tx_carrier_errors++;
|
|
}
|
|
/* Report link status changes to the network stack */
|
|
if ((d[INT_MSR] & MSR_LINK) == 0) {
|
|
if (netif_carrier_ok(dev->netdev)) {
|
|
netif_carrier_off(dev->netdev);
|
|
netdev_dbg(dev->netdev, "%s: LINK LOST\n", __func__);
|
|
}
|
|
} else {
|
|
if (!netif_carrier_ok(dev->netdev)) {
|
|
netif_carrier_on(dev->netdev);
|
|
netdev_dbg(dev->netdev, "%s: LINK CAME BACK\n", __func__);
|
|
}
|
|
}
|
|
|
|
resubmit:
|
|
res = usb_submit_urb (urb, GFP_ATOMIC);
|
|
if (res == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
else if (res)
|
|
dev_err(&dev->udev->dev,
|
|
"can't resubmit intr, %s-%s/input0, status %d\n",
|
|
dev->udev->bus->bus_name, dev->udev->devpath, res);
|
|
}
|
|
|
|
static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
rtl8150_t *dev = usb_get_intfdata(intf);
|
|
|
|
netif_device_detach(dev->netdev);
|
|
|
|
if (netif_running(dev->netdev)) {
|
|
usb_kill_urb(dev->rx_urb);
|
|
usb_kill_urb(dev->intr_urb);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8150_resume(struct usb_interface *intf)
|
|
{
|
|
rtl8150_t *dev = usb_get_intfdata(intf);
|
|
|
|
netif_device_attach(dev->netdev);
|
|
if (netif_running(dev->netdev)) {
|
|
dev->rx_urb->status = 0;
|
|
dev->rx_urb->actual_length = 0;
|
|
read_bulk_callback(dev->rx_urb);
|
|
|
|
dev->intr_urb->status = 0;
|
|
dev->intr_urb->actual_length = 0;
|
|
intr_callback(dev->intr_urb);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
**
|
|
** network related part of the code
|
|
**
|
|
*/
|
|
|
|
static void fill_skb_pool(rtl8150_t *dev)
|
|
{
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
|
|
if (dev->rx_skb_pool[i])
|
|
continue;
|
|
skb = dev_alloc_skb(RTL8150_MTU + 2);
|
|
if (!skb) {
|
|
return;
|
|
}
|
|
skb_reserve(skb, 2);
|
|
dev->rx_skb_pool[i] = skb;
|
|
}
|
|
}
|
|
|
|
static void free_skb_pool(rtl8150_t *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < RX_SKB_POOL_SIZE; i++)
|
|
if (dev->rx_skb_pool[i])
|
|
dev_kfree_skb(dev->rx_skb_pool[i]);
|
|
}
|
|
|
|
static void rx_fixup(unsigned long data)
|
|
{
|
|
struct rtl8150 *dev = (struct rtl8150 *)data;
|
|
struct sk_buff *skb;
|
|
int status;
|
|
|
|
spin_lock_irq(&dev->rx_pool_lock);
|
|
fill_skb_pool(dev);
|
|
spin_unlock_irq(&dev->rx_pool_lock);
|
|
if (test_bit(RX_URB_FAIL, &dev->flags))
|
|
if (dev->rx_skb)
|
|
goto try_again;
|
|
spin_lock_irq(&dev->rx_pool_lock);
|
|
skb = pull_skb(dev);
|
|
spin_unlock_irq(&dev->rx_pool_lock);
|
|
if (skb == NULL)
|
|
goto tlsched;
|
|
dev->rx_skb = skb;
|
|
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
|
|
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
|
|
try_again:
|
|
status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
|
|
if (status == -ENODEV) {
|
|
netif_device_detach(dev->netdev);
|
|
} else if (status) {
|
|
set_bit(RX_URB_FAIL, &dev->flags);
|
|
goto tlsched;
|
|
} else {
|
|
clear_bit(RX_URB_FAIL, &dev->flags);
|
|
}
|
|
|
|
return;
|
|
tlsched:
|
|
tasklet_schedule(&dev->tl);
|
|
}
|
|
|
|
static int enable_net_traffic(rtl8150_t * dev)
|
|
{
|
|
u8 cr, tcr, rcr, msr;
|
|
|
|
if (!rtl8150_reset(dev)) {
|
|
dev_warn(&dev->udev->dev, "device reset failed\n");
|
|
}
|
|
/* RCR bit7=1 attach Rx info at the end; =0 HW CRC (which is broken) */
|
|
rcr = 0x9e;
|
|
tcr = 0xd8;
|
|
cr = 0x0c;
|
|
if (!(rcr & 0x80))
|
|
set_bit(RTL8150_HW_CRC, &dev->flags);
|
|
set_registers(dev, RCR, 1, &rcr);
|
|
set_registers(dev, TCR, 1, &tcr);
|
|
set_registers(dev, CR, 1, &cr);
|
|
get_registers(dev, MSR, 1, &msr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void disable_net_traffic(rtl8150_t * dev)
|
|
{
|
|
u8 cr;
|
|
|
|
get_registers(dev, CR, 1, &cr);
|
|
cr &= 0xf3;
|
|
set_registers(dev, CR, 1, &cr);
|
|
}
|
|
|
|
static void rtl8150_tx_timeout(struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
dev_warn(&netdev->dev, "Tx timeout.\n");
|
|
usb_unlink_urb(dev->tx_urb);
|
|
netdev->stats.tx_errors++;
|
|
}
|
|
|
|
static void rtl8150_set_multicast(struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
u16 rx_creg = 0x9e;
|
|
|
|
netif_stop_queue(netdev);
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
rx_creg |= 0x0001;
|
|
dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
|
|
} else if (!netdev_mc_empty(netdev) ||
|
|
(netdev->flags & IFF_ALLMULTI)) {
|
|
rx_creg &= 0xfffe;
|
|
rx_creg |= 0x0002;
|
|
dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name);
|
|
} else {
|
|
/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
|
|
rx_creg &= 0x00fc;
|
|
}
|
|
async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
int count, res;
|
|
|
|
netif_stop_queue(netdev);
|
|
count = (skb->len < 60) ? 60 : skb->len;
|
|
count = (count & 0x3f) ? count : count + 1;
|
|
dev->tx_skb = skb;
|
|
usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
|
|
skb->data, count, write_bulk_callback, dev);
|
|
if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
|
|
/* Can we get/handle EPIPE here? */
|
|
if (res == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
else {
|
|
dev_warn(&netdev->dev, "failed tx_urb %d\n", res);
|
|
netdev->stats.tx_errors++;
|
|
netif_start_queue(netdev);
|
|
}
|
|
} else {
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += skb->len;
|
|
netdev->trans_start = jiffies;
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
|
|
static void set_carrier(struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
short tmp;
|
|
|
|
get_registers(dev, CSCR, 2, &tmp);
|
|
if (tmp & CSCR_LINK_STATUS)
|
|
netif_carrier_on(netdev);
|
|
else
|
|
netif_carrier_off(netdev);
|
|
}
|
|
|
|
static int rtl8150_open(struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
int res;
|
|
|
|
if (dev->rx_skb == NULL)
|
|
dev->rx_skb = pull_skb(dev);
|
|
if (!dev->rx_skb)
|
|
return -ENOMEM;
|
|
|
|
set_registers(dev, IDR, 6, netdev->dev_addr);
|
|
|
|
usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
|
|
dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
|
|
if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
|
|
if (res == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res);
|
|
return res;
|
|
}
|
|
usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
|
|
dev->intr_buff, INTBUFSIZE, intr_callback,
|
|
dev, dev->intr_interval);
|
|
if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
|
|
if (res == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res);
|
|
usb_kill_urb(dev->rx_urb);
|
|
return res;
|
|
}
|
|
enable_net_traffic(dev);
|
|
set_carrier(netdev);
|
|
netif_start_queue(netdev);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int rtl8150_close(struct net_device *netdev)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
int res = 0;
|
|
|
|
netif_stop_queue(netdev);
|
|
if (!test_bit(RTL8150_UNPLUG, &dev->flags))
|
|
disable_net_traffic(dev);
|
|
unlink_all_urbs(dev);
|
|
|
|
return res;
|
|
}
|
|
|
|
static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
|
|
strlcpy(info->driver, driver_name, sizeof(info->driver));
|
|
strlcpy(info->version, DRIVER_VERSION, sizeof(info->version));
|
|
usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
|
|
}
|
|
|
|
static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
short lpa, bmcr;
|
|
|
|
ecmd->supported = (SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_Autoneg |
|
|
SUPPORTED_TP | SUPPORTED_MII);
|
|
ecmd->port = PORT_TP;
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
ecmd->phy_address = dev->phy;
|
|
get_registers(dev, BMCR, 2, &bmcr);
|
|
get_registers(dev, ANLP, 2, &lpa);
|
|
if (bmcr & BMCR_ANENABLE) {
|
|
u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
|
|
SPEED_100 : SPEED_10);
|
|
ethtool_cmd_speed_set(ecmd, speed);
|
|
ecmd->autoneg = AUTONEG_ENABLE;
|
|
if (speed == SPEED_100)
|
|
ecmd->duplex = (lpa & LPA_100FULL) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
else
|
|
ecmd->duplex = (lpa & LPA_10FULL) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
} else {
|
|
ecmd->autoneg = AUTONEG_DISABLE;
|
|
ethtool_cmd_speed_set(ecmd, ((bmcr & BMCR_SPEED100) ?
|
|
SPEED_100 : SPEED_10));
|
|
ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops ops = {
|
|
.get_drvinfo = rtl8150_get_drvinfo,
|
|
.get_settings = rtl8150_get_settings,
|
|
.get_link = ethtool_op_get_link
|
|
};
|
|
|
|
static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
|
|
{
|
|
rtl8150_t *dev = netdev_priv(netdev);
|
|
u16 *data = (u16 *) & rq->ifr_ifru;
|
|
int res = 0;
|
|
|
|
switch (cmd) {
|
|
case SIOCDEVPRIVATE:
|
|
data[0] = dev->phy;
|
|
case SIOCDEVPRIVATE + 1:
|
|
read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
|
|
break;
|
|
case SIOCDEVPRIVATE + 2:
|
|
if (!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
|
|
break;
|
|
default:
|
|
res = -EOPNOTSUPP;
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static const struct net_device_ops rtl8150_netdev_ops = {
|
|
.ndo_open = rtl8150_open,
|
|
.ndo_stop = rtl8150_close,
|
|
.ndo_do_ioctl = rtl8150_ioctl,
|
|
.ndo_start_xmit = rtl8150_start_xmit,
|
|
.ndo_tx_timeout = rtl8150_tx_timeout,
|
|
.ndo_set_rx_mode = rtl8150_set_multicast,
|
|
.ndo_set_mac_address = rtl8150_set_mac_address,
|
|
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
static int rtl8150_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
rtl8150_t *dev;
|
|
struct net_device *netdev;
|
|
|
|
netdev = alloc_etherdev(sizeof(rtl8150_t));
|
|
if (!netdev)
|
|
return -ENOMEM;
|
|
|
|
dev = netdev_priv(netdev);
|
|
|
|
dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
|
|
if (!dev->intr_buff) {
|
|
free_netdev(netdev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
|
|
spin_lock_init(&dev->rx_pool_lock);
|
|
|
|
dev->udev = udev;
|
|
dev->netdev = netdev;
|
|
netdev->netdev_ops = &rtl8150_netdev_ops;
|
|
netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
|
|
SET_ETHTOOL_OPS(netdev, &ops);
|
|
dev->intr_interval = 100; /* 100ms */
|
|
|
|
if (!alloc_all_urbs(dev)) {
|
|
dev_err(&intf->dev, "out of memory\n");
|
|
goto out;
|
|
}
|
|
if (!rtl8150_reset(dev)) {
|
|
dev_err(&intf->dev, "couldn't reset the device\n");
|
|
goto out1;
|
|
}
|
|
fill_skb_pool(dev);
|
|
set_ethernet_addr(dev);
|
|
|
|
usb_set_intfdata(intf, dev);
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
if (register_netdev(netdev) != 0) {
|
|
dev_err(&intf->dev, "couldn't register the device\n");
|
|
goto out2;
|
|
}
|
|
|
|
dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name);
|
|
|
|
return 0;
|
|
|
|
out2:
|
|
usb_set_intfdata(intf, NULL);
|
|
free_skb_pool(dev);
|
|
out1:
|
|
free_all_urbs(dev);
|
|
out:
|
|
kfree(dev->intr_buff);
|
|
free_netdev(netdev);
|
|
return -EIO;
|
|
}
|
|
|
|
static void rtl8150_disconnect(struct usb_interface *intf)
|
|
{
|
|
rtl8150_t *dev = usb_get_intfdata(intf);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
if (dev) {
|
|
set_bit(RTL8150_UNPLUG, &dev->flags);
|
|
tasklet_kill(&dev->tl);
|
|
unregister_netdev(dev->netdev);
|
|
unlink_all_urbs(dev);
|
|
free_all_urbs(dev);
|
|
free_skb_pool(dev);
|
|
if (dev->rx_skb)
|
|
dev_kfree_skb(dev->rx_skb);
|
|
kfree(dev->intr_buff);
|
|
free_netdev(dev->netdev);
|
|
}
|
|
}
|
|
|
|
static struct usb_driver rtl8150_driver = {
|
|
.name = driver_name,
|
|
.probe = rtl8150_probe,
|
|
.disconnect = rtl8150_disconnect,
|
|
.id_table = rtl8150_table,
|
|
.suspend = rtl8150_suspend,
|
|
.resume = rtl8150_resume,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
module_usb_driver(rtl8150_driver);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|