320 lines
9.3 KiB
C
320 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for the Diamond Systems GPIO-MM
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*
|
|
* This driver supports the following Diamond Systems devices: GPIO-MM and
|
|
* GPIO-MM-12.
|
|
*/
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define GPIOMM_EXTENT 8
|
|
#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT)
|
|
|
|
static unsigned int base[MAX_NUM_GPIOMM];
|
|
static unsigned int num_gpiomm;
|
|
module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
|
|
MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
|
|
|
|
/**
|
|
* struct gpiomm_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @io_state: bit I/O state (whether bit is set to input or output)
|
|
* @out_state: output bits state
|
|
* @control: Control registers state
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
*/
|
|
struct gpiomm_gpio {
|
|
struct gpio_chip chip;
|
|
unsigned char io_state[6];
|
|
unsigned char out_state[6];
|
|
unsigned char control[2];
|
|
spinlock_t lock;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static int gpiomm_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
|
|
if (gpiommgpio->io_state[port] & mask)
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static int gpiomm_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
gpiommgpio->io_state[io_port] |= 0xF0;
|
|
gpiommgpio->control[control_port] |= BIT(3);
|
|
} else {
|
|
gpiommgpio->io_state[io_port] |= 0x0F;
|
|
gpiommgpio->control[control_port] |= BIT(0);
|
|
}
|
|
} else {
|
|
gpiommgpio->io_state[io_port] |= 0xFF;
|
|
if (io_port == 0 || io_port == 3)
|
|
gpiommgpio->control[control_port] |= BIT(4);
|
|
else
|
|
gpiommgpio->control[control_port] |= BIT(1);
|
|
}
|
|
|
|
control = BIT(7) | gpiommgpio->control[control_port];
|
|
iowrite8(control, gpiommgpio->base + 3 + control_port*4);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpiomm_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int io_port = offset / 8;
|
|
const unsigned int control_port = io_port / 3;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
|
|
unsigned long flags;
|
|
unsigned int control;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* Check if configuring Port C */
|
|
if (io_port == 2 || io_port == 5) {
|
|
/* Port C can be configured by nibble */
|
|
if (offset % 8 > 3) {
|
|
gpiommgpio->io_state[io_port] &= 0x0F;
|
|
gpiommgpio->control[control_port] &= ~BIT(3);
|
|
} else {
|
|
gpiommgpio->io_state[io_port] &= 0xF0;
|
|
gpiommgpio->control[control_port] &= ~BIT(0);
|
|
}
|
|
} else {
|
|
gpiommgpio->io_state[io_port] &= 0x00;
|
|
if (io_port == 0 || io_port == 3)
|
|
gpiommgpio->control[control_port] &= ~BIT(4);
|
|
else
|
|
gpiommgpio->control[control_port] &= ~BIT(1);
|
|
}
|
|
|
|
if (value)
|
|
gpiommgpio->out_state[io_port] |= mask;
|
|
else
|
|
gpiommgpio->out_state[io_port] &= ~mask;
|
|
|
|
control = BIT(7) | gpiommgpio->control[control_port];
|
|
iowrite8(control, gpiommgpio->base + 3 + control_port*4);
|
|
|
|
iowrite8(gpiommgpio->out_state[io_port], gpiommgpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int in_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
unsigned int port_state;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* ensure that GPIO is set for input */
|
|
if (!(gpiommgpio->io_state[port] & mask)) {
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port_state = ioread8(gpiommgpio->base + in_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
|
|
return !!(port_state & mask);
|
|
}
|
|
|
|
static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
|
|
|
|
static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
unsigned long offset;
|
|
unsigned long gpio_mask;
|
|
void __iomem *port_addr;
|
|
unsigned long port_state;
|
|
|
|
/* clear bits array to a clean slate */
|
|
bitmap_zero(bits, chip->ngpio);
|
|
|
|
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
|
|
port_addr = gpiommgpio->base + ports[offset / 8];
|
|
port_state = ioread8(port_addr) & gpio_mask;
|
|
|
|
bitmap_set_value8(bits, port_state, offset);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
const unsigned int port = offset / 8;
|
|
const unsigned int mask = BIT(offset % 8);
|
|
const unsigned int out_port = (port > 2) ? port + 1 : port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
if (value)
|
|
gpiommgpio->out_state[port] |= mask;
|
|
else
|
|
gpiommgpio->out_state[port] &= ~mask;
|
|
|
|
iowrite8(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
}
|
|
|
|
static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
|
|
unsigned long offset;
|
|
unsigned long gpio_mask;
|
|
size_t index;
|
|
void __iomem *port_addr;
|
|
unsigned long bitmask;
|
|
unsigned long flags;
|
|
|
|
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
|
|
index = offset / 8;
|
|
port_addr = gpiommgpio->base + ports[index];
|
|
|
|
bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
|
|
|
|
spin_lock_irqsave(&gpiommgpio->lock, flags);
|
|
|
|
/* update output state data and set device gpio register */
|
|
gpiommgpio->out_state[index] &= ~gpio_mask;
|
|
gpiommgpio->out_state[index] |= bitmask;
|
|
iowrite8(gpiommgpio->out_state[index], port_addr);
|
|
|
|
spin_unlock_irqrestore(&gpiommgpio->lock, flags);
|
|
}
|
|
}
|
|
|
|
#define GPIOMM_NGPIO 48
|
|
static const char *gpiomm_names[GPIOMM_NGPIO] = {
|
|
"Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
|
|
"Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
|
|
"Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
|
|
"Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
|
|
"Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
|
|
"Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
|
|
"Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
|
|
"Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
|
|
};
|
|
|
|
static int gpiomm_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct gpiomm_gpio *gpiommgpio;
|
|
const char *const name = dev_name(dev);
|
|
int err;
|
|
|
|
gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL);
|
|
if (!gpiommgpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + GPIOMM_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
gpiommgpio->base = devm_ioport_map(dev, base[id], GPIOMM_EXTENT);
|
|
if (!gpiommgpio->base)
|
|
return -ENOMEM;
|
|
|
|
gpiommgpio->chip.label = name;
|
|
gpiommgpio->chip.parent = dev;
|
|
gpiommgpio->chip.owner = THIS_MODULE;
|
|
gpiommgpio->chip.base = -1;
|
|
gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
|
|
gpiommgpio->chip.names = gpiomm_names;
|
|
gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
|
|
gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
|
|
gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
|
|
gpiommgpio->chip.get = gpiomm_gpio_get;
|
|
gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
|
|
gpiommgpio->chip.set = gpiomm_gpio_set;
|
|
gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
|
|
|
|
spin_lock_init(&gpiommgpio->lock);
|
|
|
|
err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* initialize all GPIO as output */
|
|
iowrite8(0x80, gpiommgpio->base + 3);
|
|
iowrite8(0x00, gpiommgpio->base);
|
|
iowrite8(0x00, gpiommgpio->base + 1);
|
|
iowrite8(0x00, gpiommgpio->base + 2);
|
|
iowrite8(0x80, gpiommgpio->base + 7);
|
|
iowrite8(0x00, gpiommgpio->base + 4);
|
|
iowrite8(0x00, gpiommgpio->base + 5);
|
|
iowrite8(0x00, gpiommgpio->base + 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct isa_driver gpiomm_driver = {
|
|
.probe = gpiomm_probe,
|
|
.driver = {
|
|
.name = "gpio-mm"
|
|
},
|
|
};
|
|
|
|
module_isa_driver(gpiomm_driver, num_gpiomm);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver");
|
|
MODULE_LICENSE("GPL v2");
|