1006 lines
26 KiB
C
1006 lines
26 KiB
C
/*
|
|
em28xx-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
|
|
|
Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
|
|
Markus Rechberger <mrechberger@gmail.com>
|
|
Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Sascha Sommer <saschasommer@freenet.de>
|
|
Copyright (C) 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include "em28xx.h"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include "tuner-xc2028.h"
|
|
#include <media/v4l2-common.h>
|
|
#include <media/tuner.h>
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
static unsigned int i2c_scan;
|
|
module_param(i2c_scan, int, 0444);
|
|
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
|
|
|
|
static unsigned int i2c_debug;
|
|
module_param(i2c_debug, int, 0644);
|
|
MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I2C transfers)");
|
|
|
|
#define dprintk(level, fmt, arg...) do { \
|
|
if (i2c_debug > level) \
|
|
dev_printk(KERN_DEBUG, &dev->intf->dev, \
|
|
"i2c: %s: " fmt, __func__, ## arg); \
|
|
} while (0)
|
|
|
|
|
|
/*
|
|
* em2800_i2c_send_bytes()
|
|
* send up to 4 bytes to the em2800 i2c device
|
|
*/
|
|
static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
|
|
int ret;
|
|
u8 b2[6];
|
|
|
|
if (len < 1 || len > 4)
|
|
return -EOPNOTSUPP;
|
|
|
|
BUG_ON(len < 1 || len > 4);
|
|
b2[5] = 0x80 + len - 1;
|
|
b2[4] = addr;
|
|
b2[3] = buf[0];
|
|
if (len > 1)
|
|
b2[2] = buf[1];
|
|
if (len > 2)
|
|
b2[1] = buf[2];
|
|
if (len > 3)
|
|
b2[0] = buf[3];
|
|
|
|
/* trigger write */
|
|
ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
|
|
if (ret != 2 + len) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to trigger write to i2c address 0x%x (error=%i)\n",
|
|
addr, ret);
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
/* wait for completion */
|
|
while (time_is_after_jiffies(timeout)) {
|
|
ret = dev->em28xx_read_reg(dev, 0x05);
|
|
if (ret == 0x80 + len - 1)
|
|
return len;
|
|
if (ret == 0x94 + len - 1) {
|
|
dprintk(1, "R05 returned 0x%02x: I2C ACK error\n", ret);
|
|
return -ENXIO;
|
|
}
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to get i2c transfer status from bridge register (error=%i)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
msleep(5);
|
|
}
|
|
dprintk(0, "write to i2c device at 0x%x timed out\n", addr);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* em2800_i2c_recv_bytes()
|
|
* read up to 4 bytes from the em2800 i2c device
|
|
*/
|
|
static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
|
|
u8 buf2[4];
|
|
int ret;
|
|
int i;
|
|
|
|
if (len < 1 || len > 4)
|
|
return -EOPNOTSUPP;
|
|
|
|
/* trigger read */
|
|
buf2[1] = 0x84 + len - 1;
|
|
buf2[0] = addr;
|
|
ret = dev->em28xx_write_regs(dev, 0x04, buf2, 2);
|
|
if (ret != 2) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to trigger read from i2c address 0x%x (error=%i)\n",
|
|
addr, ret);
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
|
|
/* wait for completion */
|
|
while (time_is_after_jiffies(timeout)) {
|
|
ret = dev->em28xx_read_reg(dev, 0x05);
|
|
if (ret == 0x84 + len - 1)
|
|
break;
|
|
if (ret == 0x94 + len - 1) {
|
|
dprintk(1, "R05 returned 0x%02x: I2C ACK error\n",
|
|
ret);
|
|
return -ENXIO;
|
|
}
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to get i2c transfer status from bridge register (error=%i)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
msleep(5);
|
|
}
|
|
if (ret != 0x84 + len - 1) {
|
|
dprintk(0, "read from i2c device at 0x%x timed out\n", addr);
|
|
}
|
|
|
|
/* get the received message */
|
|
ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
|
|
if (ret != len) {
|
|
dev_warn(&dev->intf->dev,
|
|
"reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n",
|
|
addr, ret);
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
for (i = 0; i < len; i++)
|
|
buf[i] = buf2[len - 1 - i];
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* em2800_i2c_check_for_device()
|
|
* check if there is an i2c device at the supplied address
|
|
*/
|
|
static int em2800_i2c_check_for_device(struct em28xx *dev, u8 addr)
|
|
{
|
|
u8 buf;
|
|
int ret;
|
|
|
|
ret = em2800_i2c_recv_bytes(dev, addr, &buf, 1);
|
|
if (ret == 1)
|
|
return 0;
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_send_bytes()
|
|
*/
|
|
static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
|
|
u16 len, int stop)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(EM28XX_I2C_XFER_TIMEOUT);
|
|
int ret;
|
|
|
|
if (len < 1 || len > 64)
|
|
return -EOPNOTSUPP;
|
|
/*
|
|
* NOTE: limited by the USB ctrl message constraints
|
|
* Zero length reads always succeed, even if no device is connected
|
|
*/
|
|
|
|
/* Write to i2c device */
|
|
ret = dev->em28xx_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
|
|
if (ret != len) {
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"writing to i2c device at 0x%x failed (error=%i)\n",
|
|
addr, ret);
|
|
return ret;
|
|
} else {
|
|
dev_warn(&dev->intf->dev,
|
|
"%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
|
|
len, addr, ret);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* wait for completion */
|
|
while (time_is_after_jiffies(timeout)) {
|
|
ret = dev->em28xx_read_reg(dev, 0x05);
|
|
if (ret == 0) /* success */
|
|
return len;
|
|
if (ret == 0x10) {
|
|
dprintk(1, "I2C ACK error on writing to addr 0x%02x\n",
|
|
addr);
|
|
return -ENXIO;
|
|
}
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to get i2c transfer status from bridge register (error=%i)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
msleep(5);
|
|
/*
|
|
* NOTE: do we really have to wait for success ?
|
|
* Never seen anything else than 0x00 or 0x10
|
|
* (even with high payload) ...
|
|
*/
|
|
}
|
|
|
|
if (ret == 0x02 || ret == 0x04) {
|
|
/* NOTE: these errors seem to be related to clock stretching */
|
|
dprintk(0,
|
|
"write to i2c device at 0x%x timed out (status=%i)\n",
|
|
addr, ret);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
dev_warn(&dev->intf->dev,
|
|
"write to i2c device at 0x%x failed with unknown error (status=%i)\n",
|
|
addr, ret);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_recv_bytes()
|
|
* read a byte from the i2c device
|
|
*/
|
|
static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
|
|
{
|
|
int ret;
|
|
|
|
if (len < 1 || len > 64)
|
|
return -EOPNOTSUPP;
|
|
/*
|
|
* NOTE: limited by the USB ctrl message constraints
|
|
* Zero length reads always succeed, even if no device is connected
|
|
*/
|
|
|
|
/* Read data from i2c device */
|
|
ret = dev->em28xx_read_reg_req_len(dev, 2, addr, buf, len);
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"reading from i2c device at 0x%x failed (error=%i)\n",
|
|
addr, ret);
|
|
return ret;
|
|
}
|
|
/*
|
|
* NOTE: some devices with two i2c busses have the bad habit to return 0
|
|
* bytes if we are on bus B AND there was no write attempt to the
|
|
* specified slave address before AND no device is present at the
|
|
* requested slave address.
|
|
* Anyway, the next check will fail with -ENXIO in this case, so avoid
|
|
* spamming the system log on device probing and do nothing here.
|
|
*/
|
|
|
|
/* Check success of the i2c operation */
|
|
ret = dev->em28xx_read_reg(dev, 0x05);
|
|
if (ret == 0) /* success */
|
|
return len;
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"failed to get i2c transfer status from bridge register (error=%i)\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
if (ret == 0x10) {
|
|
dprintk(1, "I2C ACK error on writing to addr 0x%02x\n",
|
|
addr);
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (ret == 0x02 || ret == 0x04) {
|
|
/* NOTE: these errors seem to be related to clock stretching */
|
|
dprintk(0,
|
|
"write to i2c device at 0x%x timed out (status=%i)\n",
|
|
addr, ret);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
dev_warn(&dev->intf->dev,
|
|
"write to i2c device at 0x%x failed with unknown error (status=%i)\n",
|
|
addr, ret);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_check_for_device()
|
|
* check if there is a i2c_device at the supplied address
|
|
*/
|
|
static int em28xx_i2c_check_for_device(struct em28xx *dev, u16 addr)
|
|
{
|
|
int ret;
|
|
u8 buf;
|
|
|
|
ret = em28xx_i2c_recv_bytes(dev, addr, &buf, 1);
|
|
if (ret == 1)
|
|
return 0;
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
|
|
/*
|
|
* em25xx_bus_B_send_bytes
|
|
* write bytes to the i2c device
|
|
*/
|
|
static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
|
|
u16 len)
|
|
{
|
|
int ret;
|
|
|
|
if (len < 1 || len > 64)
|
|
return -EOPNOTSUPP;
|
|
/*
|
|
* NOTE: limited by the USB ctrl message constraints
|
|
* Zero length reads always succeed, even if no device is connected
|
|
*/
|
|
|
|
/* Set register and write value */
|
|
ret = dev->em28xx_write_regs_req(dev, 0x06, addr, buf, len);
|
|
if (ret != len) {
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"writing to i2c device at 0x%x failed (error=%i)\n",
|
|
addr, ret);
|
|
return ret;
|
|
} else {
|
|
dev_warn(&dev->intf->dev,
|
|
"%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
|
|
len, addr, ret);
|
|
return -EIO;
|
|
}
|
|
}
|
|
/* Check success */
|
|
ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
|
|
/*
|
|
* NOTE: the only error we've seen so far is
|
|
* 0x01 when the slave device is not present
|
|
*/
|
|
if (!ret)
|
|
return len;
|
|
else if (ret > 0) {
|
|
dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return ret;
|
|
/*
|
|
* NOTE: With chip types (other chip IDs) which actually don't support
|
|
* this operation, it seems to succeed ALWAYS ! (even if there is no
|
|
* slave device or even no second i2c bus provided)
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* em25xx_bus_B_recv_bytes
|
|
* read bytes from the i2c device
|
|
*/
|
|
static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
|
|
u16 len)
|
|
{
|
|
int ret;
|
|
|
|
if (len < 1 || len > 64)
|
|
return -EOPNOTSUPP;
|
|
/*
|
|
* NOTE: limited by the USB ctrl message constraints
|
|
* Zero length reads always succeed, even if no device is connected
|
|
*/
|
|
|
|
/* Read value */
|
|
ret = dev->em28xx_read_reg_req_len(dev, 0x06, addr, buf, len);
|
|
if (ret < 0) {
|
|
dev_warn(&dev->intf->dev,
|
|
"reading from i2c device at 0x%x failed (error=%i)\n",
|
|
addr, ret);
|
|
return ret;
|
|
}
|
|
/*
|
|
* NOTE: some devices with two i2c busses have the bad habit to return 0
|
|
* bytes if we are on bus B AND there was no write attempt to the
|
|
* specified slave address before AND no device is present at the
|
|
* requested slave address.
|
|
* Anyway, the next check will fail with -ENXIO in this case, so avoid
|
|
* spamming the system log on device probing and do nothing here.
|
|
*/
|
|
|
|
/* Check success */
|
|
ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
|
|
/*
|
|
* NOTE: the only error we've seen so far is
|
|
* 0x01 when the slave device is not present
|
|
*/
|
|
if (!ret)
|
|
return len;
|
|
else if (ret > 0) {
|
|
dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return ret;
|
|
/*
|
|
* NOTE: With chip types (other chip IDs) which actually don't support
|
|
* this operation, it seems to succeed ALWAYS ! (even if there is no
|
|
* slave device or even no second i2c bus provided)
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* em25xx_bus_B_check_for_device()
|
|
* check if there is a i2c device at the supplied address
|
|
*/
|
|
static int em25xx_bus_B_check_for_device(struct em28xx *dev, u16 addr)
|
|
{
|
|
u8 buf;
|
|
int ret;
|
|
|
|
ret = em25xx_bus_B_recv_bytes(dev, addr, &buf, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
/*
|
|
* NOTE: With chips which do not support this operation,
|
|
* it seems to succeed ALWAYS ! (even if no device connected)
|
|
*/
|
|
}
|
|
|
|
static inline int i2c_check_for_device(struct em28xx_i2c_bus *i2c_bus, u16 addr)
|
|
{
|
|
struct em28xx *dev = i2c_bus->dev;
|
|
int rc = -EOPNOTSUPP;
|
|
|
|
if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
|
|
rc = em28xx_i2c_check_for_device(dev, addr);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
|
|
rc = em2800_i2c_check_for_device(dev, addr);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
|
|
rc = em25xx_bus_B_check_for_device(dev, addr);
|
|
return rc;
|
|
}
|
|
|
|
static inline int i2c_recv_bytes(struct em28xx_i2c_bus *i2c_bus,
|
|
struct i2c_msg msg)
|
|
{
|
|
struct em28xx *dev = i2c_bus->dev;
|
|
u16 addr = msg.addr << 1;
|
|
int rc = -EOPNOTSUPP;
|
|
|
|
if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
|
|
rc = em28xx_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
|
|
rc = em2800_i2c_recv_bytes(dev, addr, msg.buf, msg.len);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
|
|
rc = em25xx_bus_B_recv_bytes(dev, addr, msg.buf, msg.len);
|
|
return rc;
|
|
}
|
|
|
|
static inline int i2c_send_bytes(struct em28xx_i2c_bus *i2c_bus,
|
|
struct i2c_msg msg, int stop)
|
|
{
|
|
struct em28xx *dev = i2c_bus->dev;
|
|
u16 addr = msg.addr << 1;
|
|
int rc = -EOPNOTSUPP;
|
|
|
|
if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX)
|
|
rc = em28xx_i2c_send_bytes(dev, addr, msg.buf, msg.len, stop);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800)
|
|
rc = em2800_i2c_send_bytes(dev, addr, msg.buf, msg.len);
|
|
else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)
|
|
rc = em25xx_bus_B_send_bytes(dev, addr, msg.buf, msg.len);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_xfer()
|
|
* the main i2c transfer function
|
|
*/
|
|
static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
|
|
struct em28xx *dev = i2c_bus->dev;
|
|
unsigned bus = i2c_bus->bus;
|
|
int addr, rc, i;
|
|
u8 reg;
|
|
|
|
/* prevent i2c xfer attempts after device is disconnected
|
|
some fe's try to do i2c writes/reads from their release
|
|
interfaces when called in disconnect path */
|
|
if (dev->disconnected)
|
|
return -ENODEV;
|
|
|
|
if (!rt_mutex_trylock(&dev->i2c_bus_lock))
|
|
return -EAGAIN;
|
|
|
|
/* Switch I2C bus if needed */
|
|
if (bus != dev->cur_i2c_bus &&
|
|
i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) {
|
|
if (bus == 1)
|
|
reg = EM2874_I2C_SECONDARY_BUS_SELECT;
|
|
else
|
|
reg = 0;
|
|
em28xx_write_reg_bits(dev, EM28XX_R06_I2C_CLK, reg,
|
|
EM2874_I2C_SECONDARY_BUS_SELECT);
|
|
dev->cur_i2c_bus = bus;
|
|
}
|
|
|
|
if (num <= 0) {
|
|
rt_mutex_unlock(&dev->i2c_bus_lock);
|
|
return 0;
|
|
}
|
|
for (i = 0; i < num; i++) {
|
|
addr = msgs[i].addr << 1;
|
|
if (!msgs[i].len) {
|
|
/*
|
|
* no len: check only for device presence
|
|
* This code is only called during device probe.
|
|
*/
|
|
rc = i2c_check_for_device(i2c_bus, addr);
|
|
|
|
if (rc == -ENXIO)
|
|
rc = -ENODEV;
|
|
} else if (msgs[i].flags & I2C_M_RD) {
|
|
/* read bytes */
|
|
rc = i2c_recv_bytes(i2c_bus, msgs[i]);
|
|
} else {
|
|
/* write bytes */
|
|
rc = i2c_send_bytes(i2c_bus, msgs[i], i == num - 1);
|
|
}
|
|
|
|
if (rc < 0)
|
|
goto error;
|
|
|
|
dprintk(2, "%s %s addr=%02x len=%d: %*ph\n",
|
|
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
|
|
i == num - 1 ? "stop" : "nonstop",
|
|
addr, msgs[i].len,
|
|
msgs[i].len, msgs[i].buf);
|
|
}
|
|
|
|
rt_mutex_unlock(&dev->i2c_bus_lock);
|
|
return num;
|
|
|
|
error:
|
|
dprintk(2, "%s %s addr=%02x len=%d: %sERROR: %i\n",
|
|
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
|
|
i == num - 1 ? "stop" : "nonstop",
|
|
addr, msgs[i].len,
|
|
(rc == -ENODEV) ? "no device " : "",
|
|
rc);
|
|
|
|
rt_mutex_unlock(&dev->i2c_bus_lock);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* based on linux/sunrpc/svcauth.h and linux/hash.h
|
|
* The original hash function returns a different value, if arch is x86_64
|
|
* or i386.
|
|
*/
|
|
static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
|
|
{
|
|
unsigned long hash = 0;
|
|
unsigned long l = 0;
|
|
int len = 0;
|
|
unsigned char c;
|
|
|
|
do {
|
|
if (len == length) {
|
|
c = (char)len;
|
|
len = -1;
|
|
} else
|
|
c = *buf++;
|
|
l = (l << 8) | c;
|
|
len++;
|
|
if ((len & (32 / 8 - 1)) == 0)
|
|
hash = ((hash^l) * 0x9e370001UL);
|
|
} while (len);
|
|
|
|
return (hash >> (32 - bits)) & 0xffffffffUL;
|
|
}
|
|
|
|
/*
|
|
* Helper function to read data blocks from i2c clients with 8 or 16 bit
|
|
* address width, 8 bit register width and auto incrementation been activated
|
|
*/
|
|
static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
|
|
bool addr_w16, u16 len, u8 *data)
|
|
{
|
|
int remain = len, rsize, rsize_max, ret;
|
|
u8 buf[2];
|
|
|
|
/* Sanity check */
|
|
if (addr + remain > (addr_w16 * 0xff00 + 0xff + 1))
|
|
return -EINVAL;
|
|
/* Select address */
|
|
buf[0] = addr >> 8;
|
|
buf[1] = addr & 0xff;
|
|
ret = i2c_master_send(&dev->i2c_client[bus], buf + !addr_w16, 1 + addr_w16);
|
|
if (ret < 0)
|
|
return ret;
|
|
/* Read data */
|
|
if (dev->board.is_em2800)
|
|
rsize_max = 4;
|
|
else
|
|
rsize_max = 64;
|
|
while (remain > 0) {
|
|
if (remain > rsize_max)
|
|
rsize = rsize_max;
|
|
else
|
|
rsize = remain;
|
|
|
|
ret = i2c_master_recv(&dev->i2c_client[bus], data, rsize);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
remain -= rsize;
|
|
data += rsize;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
|
|
u8 **eedata, u16 *eedata_len)
|
|
{
|
|
const u16 len = 256;
|
|
/*
|
|
* FIXME common length/size for bytes to read, to display, hash
|
|
* calculation and returned device dataset. Simplifies the code a lot,
|
|
* but we might have to deal with multiple sizes in the future !
|
|
*/
|
|
int err;
|
|
struct em28xx_eeprom *dev_config;
|
|
u8 buf, *data;
|
|
|
|
*eedata = NULL;
|
|
*eedata_len = 0;
|
|
|
|
/* EEPROM is always on i2c bus 0 on all known devices. */
|
|
|
|
dev->i2c_client[bus].addr = 0xa0 >> 1;
|
|
|
|
/* Check if board has eeprom */
|
|
err = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
|
|
if (err < 0) {
|
|
dev_info(&dev->intf->dev, "board has no eeprom\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
data = kzalloc(len, GFP_KERNEL);
|
|
if (data == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* Read EEPROM content */
|
|
err = em28xx_i2c_read_block(dev, bus, 0x0000,
|
|
dev->eeprom_addrwidth_16bit,
|
|
len, data);
|
|
if (err != len) {
|
|
dev_err(&dev->intf->dev,
|
|
"failed to read eeprom (err=%d)\n", err);
|
|
goto error;
|
|
}
|
|
|
|
if (i2c_debug) {
|
|
/* Display eeprom content */
|
|
print_hex_dump(KERN_DEBUG, "em28xx eeprom ", DUMP_PREFIX_OFFSET,
|
|
16, 1, data, len, true);
|
|
|
|
if (dev->eeprom_addrwidth_16bit)
|
|
dev_info(&dev->intf->dev,
|
|
"eeprom %06x: ... (skipped)\n", 256);
|
|
}
|
|
|
|
if (dev->eeprom_addrwidth_16bit &&
|
|
data[0] == 0x26 && data[3] == 0x00) {
|
|
/* new eeprom format; size 4-64kb */
|
|
u16 mc_start;
|
|
u16 hwconf_offset;
|
|
|
|
dev->hash = em28xx_hash_mem(data, len, 32);
|
|
mc_start = (data[1] << 8) + 4; /* usually 0x0004 */
|
|
|
|
dev_info(&dev->intf->dev,
|
|
"EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
|
|
data[0], data[1], data[2], data[3], dev->hash);
|
|
dev_info(&dev->intf->dev,
|
|
"EEPROM info:\n");
|
|
dev_info(&dev->intf->dev,
|
|
"\tmicrocode start address = 0x%04x, boot configuration = 0x%02x\n",
|
|
mc_start, data[2]);
|
|
/*
|
|
* boot configuration (address 0x0002):
|
|
* [0] microcode download speed: 1 = 400 kHz; 0 = 100 kHz
|
|
* [1] always selects 12 kb RAM
|
|
* [2] USB device speed: 1 = force Full Speed; 0 = auto detect
|
|
* [4] 1 = force fast mode and no suspend for device testing
|
|
* [5:7] USB PHY tuning registers; determined by device
|
|
* characterization
|
|
*/
|
|
|
|
/*
|
|
* Read hardware config dataset offset from address
|
|
* (microcode start + 46)
|
|
*/
|
|
err = em28xx_i2c_read_block(dev, bus, mc_start + 46, 1, 2,
|
|
data);
|
|
if (err != 2) {
|
|
dev_err(&dev->intf->dev,
|
|
"failed to read hardware configuration data from eeprom (err=%d)\n",
|
|
err);
|
|
goto error;
|
|
}
|
|
|
|
/* Calculate hardware config dataset start address */
|
|
hwconf_offset = mc_start + data[0] + (data[1] << 8);
|
|
|
|
/* Read hardware config dataset */
|
|
/*
|
|
* NOTE: the microcode copy can be multiple pages long, but
|
|
* we assume the hardware config dataset is the same as in
|
|
* the old eeprom and not longer than 256 bytes.
|
|
* tveeprom is currently also limited to 256 bytes.
|
|
*/
|
|
err = em28xx_i2c_read_block(dev, bus, hwconf_offset, 1, len,
|
|
data);
|
|
if (err != len) {
|
|
dev_err(&dev->intf->dev,
|
|
"failed to read hardware configuration data from eeprom (err=%d)\n",
|
|
err);
|
|
goto error;
|
|
}
|
|
|
|
/* Verify hardware config dataset */
|
|
/* NOTE: not all devices provide this type of dataset */
|
|
if (data[0] != 0x1a || data[1] != 0xeb ||
|
|
data[2] != 0x67 || data[3] != 0x95) {
|
|
dev_info(&dev->intf->dev,
|
|
"\tno hardware configuration dataset found in eeprom\n");
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
/* TODO: decrypt eeprom data for camera bridges (em25xx, em276x+) */
|
|
|
|
} else if (!dev->eeprom_addrwidth_16bit &&
|
|
data[0] == 0x1a && data[1] == 0xeb &&
|
|
data[2] == 0x67 && data[3] == 0x95) {
|
|
dev->hash = em28xx_hash_mem(data, len, 32);
|
|
dev_info(&dev->intf->dev,
|
|
"EEPROM ID = %02x %02x %02x %02x, EEPROM hash = 0x%08lx\n",
|
|
data[0], data[1], data[2], data[3], dev->hash);
|
|
dev_info(&dev->intf->dev,
|
|
"EEPROM info:\n");
|
|
} else {
|
|
dev_info(&dev->intf->dev,
|
|
"unknown eeprom format or eeprom corrupted !\n");
|
|
err = -ENODEV;
|
|
goto error;
|
|
}
|
|
|
|
*eedata = data;
|
|
*eedata_len = len;
|
|
dev_config = (void *)*eedata;
|
|
|
|
switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
|
|
case 0:
|
|
dev_info(&dev->intf->dev, "\tNo audio on board.\n");
|
|
break;
|
|
case 1:
|
|
dev_info(&dev->intf->dev, "\tAC97 audio (5 sample rates)\n");
|
|
break;
|
|
case 2:
|
|
if (dev->chip_id < CHIP_ID_EM2860)
|
|
dev_info(&dev->intf->dev,
|
|
"\tI2S audio, sample rate=32k\n");
|
|
else
|
|
dev_info(&dev->intf->dev,
|
|
"\tI2S audio, 3 sample rates\n");
|
|
break;
|
|
case 3:
|
|
if (dev->chip_id < CHIP_ID_EM2860)
|
|
dev_info(&dev->intf->dev,
|
|
"\tI2S audio, 3 sample rates\n");
|
|
else
|
|
dev_info(&dev->intf->dev,
|
|
"\tI2S audio, 5 sample rates\n");
|
|
break;
|
|
}
|
|
|
|
if (le16_to_cpu(dev_config->chip_conf) & 1 << 3)
|
|
dev_info(&dev->intf->dev, "\tUSB Remote wakeup capable\n");
|
|
|
|
if (le16_to_cpu(dev_config->chip_conf) & 1 << 2)
|
|
dev_info(&dev->intf->dev, "\tUSB Self power capable\n");
|
|
|
|
switch (le16_to_cpu(dev_config->chip_conf) & 0x3) {
|
|
case 0:
|
|
dev_info(&dev->intf->dev, "\t500mA max power\n");
|
|
break;
|
|
case 1:
|
|
dev_info(&dev->intf->dev, "\t400mA max power\n");
|
|
break;
|
|
case 2:
|
|
dev_info(&dev->intf->dev, "\t300mA max power\n");
|
|
break;
|
|
case 3:
|
|
dev_info(&dev->intf->dev, "\t200mA max power\n");
|
|
break;
|
|
}
|
|
dev_info(&dev->intf->dev,
|
|
"\tTable at offset 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
|
|
dev_config->string_idx_table,
|
|
le16_to_cpu(dev_config->string1),
|
|
le16_to_cpu(dev_config->string2),
|
|
le16_to_cpu(dev_config->string3));
|
|
|
|
return 0;
|
|
|
|
error:
|
|
kfree(data);
|
|
return err;
|
|
}
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
/*
|
|
* functionality()
|
|
*/
|
|
static u32 functionality(struct i2c_adapter *i2c_adap)
|
|
{
|
|
struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
|
|
|
|
if ((i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) ||
|
|
(i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)) {
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
} else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) {
|
|
return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) &
|
|
~I2C_FUNC_SMBUS_WRITE_BLOCK_DATA;
|
|
}
|
|
|
|
WARN(1, "Unknown i2c bus algorithm.\n");
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_algorithm em28xx_algo = {
|
|
.master_xfer = em28xx_i2c_xfer,
|
|
.functionality = functionality,
|
|
};
|
|
|
|
static const struct i2c_adapter em28xx_adap_template = {
|
|
.owner = THIS_MODULE,
|
|
.name = "em28xx",
|
|
.algo = &em28xx_algo,
|
|
};
|
|
|
|
static struct i2c_client em28xx_client_template = {
|
|
.name = "em28xx internal",
|
|
};
|
|
|
|
/* ----------------------------------------------------------- */
|
|
|
|
/*
|
|
* i2c_devs
|
|
* incomplete list of known devices
|
|
*/
|
|
static char *i2c_devs[128] = {
|
|
[0x1c >> 1] = "lgdt330x",
|
|
[0x3e >> 1] = "remote IR sensor",
|
|
[0x4a >> 1] = "saa7113h",
|
|
[0x52 >> 1] = "drxk",
|
|
[0x60 >> 1] = "remote IR sensor",
|
|
[0x8e >> 1] = "remote IR sensor",
|
|
[0x86 >> 1] = "tda9887",
|
|
[0x80 >> 1] = "msp34xx",
|
|
[0x88 >> 1] = "msp34xx",
|
|
[0xa0 >> 1] = "eeprom",
|
|
[0xb0 >> 1] = "tda9874",
|
|
[0xb8 >> 1] = "tvp5150a",
|
|
[0xba >> 1] = "webcam sensor or tvp5150a",
|
|
[0xc0 >> 1] = "tuner (analog)",
|
|
[0xc2 >> 1] = "tuner (analog)",
|
|
[0xc4 >> 1] = "tuner (analog)",
|
|
[0xc6 >> 1] = "tuner (analog)",
|
|
};
|
|
|
|
/*
|
|
* do_i2c_scan()
|
|
* check i2c address range for devices
|
|
*/
|
|
void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus)
|
|
{
|
|
u8 i2c_devicelist[128];
|
|
unsigned char buf;
|
|
int i, rc;
|
|
|
|
memset(i2c_devicelist, 0, ARRAY_SIZE(i2c_devicelist));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
|
|
dev->i2c_client[bus].addr = i;
|
|
rc = i2c_master_recv(&dev->i2c_client[bus], &buf, 0);
|
|
if (rc < 0)
|
|
continue;
|
|
i2c_devicelist[i] = i;
|
|
dev_info(&dev->intf->dev,
|
|
"found i2c device @ 0x%x on bus %d [%s]\n",
|
|
i << 1, bus, i2c_devs[i] ? i2c_devs[i] : "???");
|
|
}
|
|
|
|
if (bus == dev->def_i2c_bus)
|
|
dev->i2c_hash = em28xx_hash_mem(i2c_devicelist,
|
|
ARRAY_SIZE(i2c_devicelist), 32);
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_register()
|
|
* register i2c bus
|
|
*/
|
|
int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
|
|
enum em28xx_i2c_algo_type algo_type)
|
|
{
|
|
int retval;
|
|
|
|
BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
|
|
BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
|
|
|
|
if (bus >= NUM_I2C_BUSES)
|
|
return -ENODEV;
|
|
|
|
dev->i2c_adap[bus] = em28xx_adap_template;
|
|
dev->i2c_adap[bus].dev.parent = &dev->intf->dev;
|
|
strcpy(dev->i2c_adap[bus].name, dev_name(&dev->intf->dev));
|
|
|
|
dev->i2c_bus[bus].bus = bus;
|
|
dev->i2c_bus[bus].algo_type = algo_type;
|
|
dev->i2c_bus[bus].dev = dev;
|
|
dev->i2c_adap[bus].algo_data = &dev->i2c_bus[bus];
|
|
|
|
retval = i2c_add_adapter(&dev->i2c_adap[bus]);
|
|
if (retval < 0) {
|
|
dev_err(&dev->intf->dev,
|
|
"%s: i2c_add_adapter failed! retval [%d]\n",
|
|
__func__, retval);
|
|
return retval;
|
|
}
|
|
|
|
dev->i2c_client[bus] = em28xx_client_template;
|
|
dev->i2c_client[bus].adapter = &dev->i2c_adap[bus];
|
|
|
|
/* Up to now, all eeproms are at bus 0 */
|
|
if (!bus) {
|
|
retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
|
|
if ((retval < 0) && (retval != -ENODEV)) {
|
|
dev_err(&dev->intf->dev,
|
|
"%s: em28xx_i2_eeprom failed! retval [%d]\n",
|
|
__func__, retval);
|
|
}
|
|
}
|
|
|
|
if (i2c_scan)
|
|
em28xx_do_i2c_scan(dev, bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* em28xx_i2c_unregister()
|
|
* unregister i2c_bus
|
|
*/
|
|
int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus)
|
|
{
|
|
if (bus >= NUM_I2C_BUSES)
|
|
return -ENODEV;
|
|
|
|
i2c_del_adapter(&dev->i2c_adap[bus]);
|
|
return 0;
|
|
}
|