480 lines
12 KiB
C
480 lines
12 KiB
C
/*
|
|
* Samsung Standard Definition Output (SDO) driver
|
|
*
|
|
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
|
|
*
|
|
* Tomasz Stanislawski, <t.stanislaws@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published
|
|
* by the Free Software Foundiation. either version 2 of the License,
|
|
* or (at your option) any later version
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#include "regs-sdo.h"
|
|
|
|
MODULE_AUTHOR("Tomasz Stanislawski, <t.stanislaws@samsung.com>");
|
|
MODULE_DESCRIPTION("Samsung Standard Definition Output (SDO)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define SDO_DEFAULT_STD V4L2_STD_PAL
|
|
|
|
struct sdo_format {
|
|
v4l2_std_id id;
|
|
/* all modes are 720 pixels wide */
|
|
unsigned int height;
|
|
unsigned int cookie;
|
|
};
|
|
|
|
struct sdo_device {
|
|
/** pointer to device parent */
|
|
struct device *dev;
|
|
/** base address of SDO registers */
|
|
void __iomem *regs;
|
|
/** SDO interrupt */
|
|
unsigned int irq;
|
|
/** DAC source clock */
|
|
struct clk *sclk_dac;
|
|
/** DAC clock */
|
|
struct clk *dac;
|
|
/** DAC physical interface */
|
|
struct clk *dacphy;
|
|
/** clock for control of VPLL */
|
|
struct clk *fout_vpll;
|
|
/** regulator for SDO IP power */
|
|
struct regulator *vdac;
|
|
/** regulator for SDO plug detection */
|
|
struct regulator *vdet;
|
|
/** subdev used as device interface */
|
|
struct v4l2_subdev sd;
|
|
/** current format */
|
|
const struct sdo_format *fmt;
|
|
};
|
|
|
|
static inline struct sdo_device *sd_to_sdev(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct sdo_device, sd);
|
|
}
|
|
|
|
static inline
|
|
void sdo_write_mask(struct sdo_device *sdev, u32 reg_id, u32 value, u32 mask)
|
|
{
|
|
u32 old = readl(sdev->regs + reg_id);
|
|
value = (value & mask) | (old & ~mask);
|
|
writel(value, sdev->regs + reg_id);
|
|
}
|
|
|
|
static inline
|
|
void sdo_write(struct sdo_device *sdev, u32 reg_id, u32 value)
|
|
{
|
|
writel(value, sdev->regs + reg_id);
|
|
}
|
|
|
|
static inline
|
|
u32 sdo_read(struct sdo_device *sdev, u32 reg_id)
|
|
{
|
|
return readl(sdev->regs + reg_id);
|
|
}
|
|
|
|
static irqreturn_t sdo_irq_handler(int irq, void *dev_data)
|
|
{
|
|
struct sdo_device *sdev = dev_data;
|
|
|
|
/* clear interrupt */
|
|
sdo_write_mask(sdev, SDO_IRQ, ~0, SDO_VSYNC_IRQ_PEND);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sdo_reg_debug(struct sdo_device *sdev)
|
|
{
|
|
#define DBGREG(reg_id) \
|
|
dev_info(sdev->dev, #reg_id " = %08x\n", \
|
|
sdo_read(sdev, reg_id))
|
|
|
|
DBGREG(SDO_CLKCON);
|
|
DBGREG(SDO_CONFIG);
|
|
DBGREG(SDO_VBI);
|
|
DBGREG(SDO_DAC);
|
|
DBGREG(SDO_IRQ);
|
|
DBGREG(SDO_IRQMASK);
|
|
DBGREG(SDO_VERSION);
|
|
}
|
|
|
|
static const struct sdo_format sdo_format[] = {
|
|
{ V4L2_STD_PAL_N, .height = 576, .cookie = SDO_PAL_N },
|
|
{ V4L2_STD_PAL_Nc, .height = 576, .cookie = SDO_PAL_NC },
|
|
{ V4L2_STD_PAL_M, .height = 480, .cookie = SDO_PAL_M },
|
|
{ V4L2_STD_PAL_60, .height = 480, .cookie = SDO_PAL_60 },
|
|
{ V4L2_STD_NTSC_443, .height = 480, .cookie = SDO_NTSC_443 },
|
|
{ V4L2_STD_PAL, .height = 576, .cookie = SDO_PAL_BGHID },
|
|
{ V4L2_STD_NTSC_M, .height = 480, .cookie = SDO_NTSC_M },
|
|
};
|
|
|
|
static const struct sdo_format *sdo_find_format(v4l2_std_id id)
|
|
{
|
|
int i;
|
|
for (i = 0; i < ARRAY_SIZE(sdo_format); ++i)
|
|
if (sdo_format[i].id & id)
|
|
return &sdo_format[i];
|
|
return NULL;
|
|
}
|
|
|
|
static int sdo_g_tvnorms_output(struct v4l2_subdev *sd, v4l2_std_id *std)
|
|
{
|
|
*std = V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL |
|
|
V4L2_STD_PAL_N | V4L2_STD_PAL_Nc |
|
|
V4L2_STD_NTSC_443 | V4L2_STD_PAL_60;
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
|
|
{
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
const struct sdo_format *fmt;
|
|
fmt = sdo_find_format(std);
|
|
if (fmt == NULL)
|
|
return -EINVAL;
|
|
sdev->fmt = fmt;
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_g_std_output(struct v4l2_subdev *sd, v4l2_std_id *std)
|
|
{
|
|
*std = sd_to_sdev(sd)->fmt->id;
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_g_mbus_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
|
|
if (!sdev->fmt)
|
|
return -ENXIO;
|
|
/* all modes are 720 pixels wide */
|
|
fmt->width = 720;
|
|
fmt->height = sdev->fmt->height;
|
|
fmt->code = V4L2_MBUS_FMT_FIXED;
|
|
fmt->field = V4L2_FIELD_INTERLACED;
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
struct device *dev = sdev->dev;
|
|
int ret;
|
|
|
|
dev_info(dev, "sdo_s_power(%d)\n", on);
|
|
|
|
if (on)
|
|
ret = pm_runtime_get_sync(dev);
|
|
else
|
|
ret = pm_runtime_put_sync(dev);
|
|
|
|
/* only values < 0 indicate errors */
|
|
return IS_ERR_VALUE(ret) ? ret : 0;
|
|
}
|
|
|
|
static int sdo_streamon(struct sdo_device *sdev)
|
|
{
|
|
/* set proper clock for Timing Generator */
|
|
clk_set_rate(sdev->fout_vpll, 54000000);
|
|
dev_info(sdev->dev, "fout_vpll.rate = %lu\n",
|
|
clk_get_rate(sdev->fout_vpll));
|
|
/* enable clock in SDO */
|
|
sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
|
|
clk_enable(sdev->dacphy);
|
|
/* enable DAC */
|
|
sdo_write_mask(sdev, SDO_DAC, ~0, SDO_POWER_ON_DAC);
|
|
sdo_reg_debug(sdev);
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_streamoff(struct sdo_device *sdev)
|
|
{
|
|
int tries;
|
|
|
|
sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
|
|
clk_disable(sdev->dacphy);
|
|
sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
|
|
for (tries = 100; tries; --tries) {
|
|
if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
if (tries == 0)
|
|
dev_err(sdev->dev, "failed to stop streaming\n");
|
|
return tries ? 0 : -EIO;
|
|
}
|
|
|
|
static int sdo_s_stream(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
return on ? sdo_streamon(sdev) : sdo_streamoff(sdev);
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops sdo_sd_core_ops = {
|
|
.s_power = sdo_s_power,
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops sdo_sd_video_ops = {
|
|
.s_std_output = sdo_s_std_output,
|
|
.g_std_output = sdo_g_std_output,
|
|
.g_tvnorms_output = sdo_g_tvnorms_output,
|
|
.g_mbus_fmt = sdo_g_mbus_fmt,
|
|
.s_stream = sdo_s_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops sdo_sd_ops = {
|
|
.core = &sdo_sd_core_ops,
|
|
.video = &sdo_sd_video_ops,
|
|
};
|
|
|
|
static int sdo_runtime_suspend(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
|
|
dev_info(dev, "suspend\n");
|
|
regulator_disable(sdev->vdet);
|
|
regulator_disable(sdev->vdac);
|
|
clk_disable(sdev->sclk_dac);
|
|
return 0;
|
|
}
|
|
|
|
static int sdo_runtime_resume(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
|
|
dev_info(dev, "resume\n");
|
|
clk_enable(sdev->sclk_dac);
|
|
regulator_enable(sdev->vdac);
|
|
regulator_enable(sdev->vdet);
|
|
|
|
/* software reset */
|
|
sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_SW_RESET);
|
|
mdelay(10);
|
|
sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_SW_RESET);
|
|
|
|
/* setting TV mode */
|
|
sdo_write_mask(sdev, SDO_CONFIG, sdev->fmt->cookie, SDO_STANDARD_MASK);
|
|
/* XXX: forcing interlaced mode using undocumented bit */
|
|
sdo_write_mask(sdev, SDO_CONFIG, 0, SDO_PROGRESSIVE);
|
|
/* turn all VBI off */
|
|
sdo_write_mask(sdev, SDO_VBI, 0, SDO_CVBS_WSS_INS |
|
|
SDO_CVBS_CLOSED_CAPTION_MASK);
|
|
/* turn all post processing off */
|
|
sdo_write_mask(sdev, SDO_CCCON, ~0, SDO_COMPENSATION_BHS_ADJ_OFF |
|
|
SDO_COMPENSATION_CVBS_COMP_OFF);
|
|
sdo_reg_debug(sdev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sdo_pm_ops = {
|
|
.runtime_suspend = sdo_runtime_suspend,
|
|
.runtime_resume = sdo_runtime_resume,
|
|
};
|
|
|
|
static int __devinit sdo_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sdo_device *sdev;
|
|
struct resource *res;
|
|
int ret = 0;
|
|
struct clk *sclk_vpll;
|
|
|
|
dev_info(dev, "probe start\n");
|
|
sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
|
|
if (!sdev) {
|
|
dev_err(dev, "not enough memory.\n");
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
sdev->dev = dev;
|
|
|
|
/* mapping registers */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(dev, "get memory resource failed.\n");
|
|
ret = -ENXIO;
|
|
goto fail_sdev;
|
|
}
|
|
|
|
sdev->regs = ioremap(res->start, resource_size(res));
|
|
if (sdev->regs == NULL) {
|
|
dev_err(dev, "register mapping failed.\n");
|
|
ret = -ENXIO;
|
|
goto fail_sdev;
|
|
}
|
|
|
|
/* acquiring interrupt */
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (res == NULL) {
|
|
dev_err(dev, "get interrupt resource failed.\n");
|
|
ret = -ENXIO;
|
|
goto fail_regs;
|
|
}
|
|
ret = request_irq(res->start, sdo_irq_handler, 0, "s5p-sdo", sdev);
|
|
if (ret) {
|
|
dev_err(dev, "request interrupt failed.\n");
|
|
goto fail_regs;
|
|
}
|
|
sdev->irq = res->start;
|
|
|
|
/* acquire clocks */
|
|
sdev->sclk_dac = clk_get(dev, "sclk_dac");
|
|
if (IS_ERR_OR_NULL(sdev->sclk_dac)) {
|
|
dev_err(dev, "failed to get clock 'sclk_dac'\n");
|
|
ret = -ENXIO;
|
|
goto fail_irq;
|
|
}
|
|
sdev->dac = clk_get(dev, "dac");
|
|
if (IS_ERR_OR_NULL(sdev->dac)) {
|
|
dev_err(dev, "failed to get clock 'dac'\n");
|
|
ret = -ENXIO;
|
|
goto fail_sclk_dac;
|
|
}
|
|
sdev->dacphy = clk_get(dev, "dacphy");
|
|
if (IS_ERR_OR_NULL(sdev->dacphy)) {
|
|
dev_err(dev, "failed to get clock 'dacphy'\n");
|
|
ret = -ENXIO;
|
|
goto fail_dac;
|
|
}
|
|
sclk_vpll = clk_get(dev, "sclk_vpll");
|
|
if (IS_ERR_OR_NULL(sclk_vpll)) {
|
|
dev_err(dev, "failed to get clock 'sclk_vpll'\n");
|
|
ret = -ENXIO;
|
|
goto fail_dacphy;
|
|
}
|
|
clk_set_parent(sdev->sclk_dac, sclk_vpll);
|
|
clk_put(sclk_vpll);
|
|
sdev->fout_vpll = clk_get(dev, "fout_vpll");
|
|
if (IS_ERR_OR_NULL(sdev->fout_vpll)) {
|
|
dev_err(dev, "failed to get clock 'fout_vpll'\n");
|
|
goto fail_dacphy;
|
|
}
|
|
dev_info(dev, "fout_vpll.rate = %lu\n", clk_get_rate(sclk_vpll));
|
|
|
|
/* acquire regulator */
|
|
sdev->vdac = regulator_get(dev, "vdd33a_dac");
|
|
if (IS_ERR_OR_NULL(sdev->vdac)) {
|
|
dev_err(dev, "failed to get regulator 'vdac'\n");
|
|
goto fail_fout_vpll;
|
|
}
|
|
sdev->vdet = regulator_get(dev, "vdet");
|
|
if (IS_ERR_OR_NULL(sdev->vdet)) {
|
|
dev_err(dev, "failed to get regulator 'vdet'\n");
|
|
goto fail_vdac;
|
|
}
|
|
|
|
/* enable gate for dac clock, because mixer uses it */
|
|
clk_enable(sdev->dac);
|
|
|
|
/* configure power management */
|
|
pm_runtime_enable(dev);
|
|
|
|
/* configuration of interface subdevice */
|
|
v4l2_subdev_init(&sdev->sd, &sdo_sd_ops);
|
|
sdev->sd.owner = THIS_MODULE;
|
|
strlcpy(sdev->sd.name, "s5p-sdo", sizeof sdev->sd.name);
|
|
|
|
/* set default format */
|
|
sdev->fmt = sdo_find_format(SDO_DEFAULT_STD);
|
|
BUG_ON(sdev->fmt == NULL);
|
|
|
|
/* keeping subdev in device's private for use by other drivers */
|
|
dev_set_drvdata(dev, &sdev->sd);
|
|
|
|
dev_info(dev, "probe succeeded\n");
|
|
return 0;
|
|
|
|
fail_vdac:
|
|
regulator_put(sdev->vdac);
|
|
fail_fout_vpll:
|
|
clk_put(sdev->fout_vpll);
|
|
fail_dacphy:
|
|
clk_put(sdev->dacphy);
|
|
fail_dac:
|
|
clk_put(sdev->dac);
|
|
fail_sclk_dac:
|
|
clk_put(sdev->sclk_dac);
|
|
fail_irq:
|
|
free_irq(sdev->irq, sdev);
|
|
fail_regs:
|
|
iounmap(sdev->regs);
|
|
fail_sdev:
|
|
kfree(sdev);
|
|
fail:
|
|
dev_info(dev, "probe failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit sdo_remove(struct platform_device *pdev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(&pdev->dev);
|
|
struct sdo_device *sdev = sd_to_sdev(sd);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
clk_disable(sdev->dac);
|
|
regulator_put(sdev->vdet);
|
|
regulator_put(sdev->vdac);
|
|
clk_put(sdev->fout_vpll);
|
|
clk_put(sdev->dacphy);
|
|
clk_put(sdev->dac);
|
|
clk_put(sdev->sclk_dac);
|
|
free_irq(sdev->irq, sdev);
|
|
iounmap(sdev->regs);
|
|
kfree(sdev);
|
|
|
|
dev_info(&pdev->dev, "remove successful\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sdo_driver __refdata = {
|
|
.probe = sdo_probe,
|
|
.remove = __devexit_p(sdo_remove),
|
|
.driver = {
|
|
.name = "s5p-sdo",
|
|
.owner = THIS_MODULE,
|
|
.pm = &sdo_pm_ops,
|
|
}
|
|
};
|
|
|
|
static int __init sdo_init(void)
|
|
{
|
|
int ret;
|
|
static const char banner[] __initdata = KERN_INFO \
|
|
"Samsung Standard Definition Output (SDO) driver, "
|
|
"(c) 2010-2011 Samsung Electronics Co., Ltd.\n";
|
|
printk(banner);
|
|
|
|
ret = platform_driver_register(&sdo_driver);
|
|
if (ret)
|
|
printk(KERN_ERR "SDO platform driver register failed\n");
|
|
|
|
return ret;
|
|
}
|
|
module_init(sdo_init);
|
|
|
|
static void __exit sdo_exit(void)
|
|
{
|
|
platform_driver_unregister(&sdo_driver);
|
|
}
|
|
module_exit(sdo_exit);
|