48 lines
1.4 KiB
Plaintext
48 lines
1.4 KiB
Plaintext
======================================================================
|
|
Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
|
|
======================================================================
|
|
|
|
The bridge is available on platforms with the VGA enabled on the Aspeed device.
|
|
In this case, the host has access to a 64KiB window into all of the BMC's
|
|
memory. The BMC can disable this bridge. If the bridge is enabled, the host
|
|
has read access to all the regions of memory, however the host only has read
|
|
and write access depending on a register controlled by the BMC.
|
|
|
|
Required properties:
|
|
===================
|
|
|
|
- compatible: must be one of:
|
|
- "aspeed,ast2400-p2a-ctrl"
|
|
- "aspeed,ast2500-p2a-ctrl"
|
|
|
|
Optional properties:
|
|
===================
|
|
|
|
- memory-region: A phandle to a reserved_memory region to be used for the PCI
|
|
to AHB mapping
|
|
|
|
The p2a-control node should be the child of a syscon node with the required
|
|
property:
|
|
|
|
- compatible : Should be one of the following:
|
|
"aspeed,ast2400-scu", "syscon", "simple-mfd"
|
|
"aspeed,g4-scu", "syscon", "simple-mfd"
|
|
"aspeed,ast2500-scu", "syscon", "simple-mfd"
|
|
"aspeed,g5-scu", "syscon", "simple-mfd"
|
|
|
|
Example
|
|
===================
|
|
|
|
g4 Example
|
|
----------
|
|
|
|
syscon: scu@1e6e2000 {
|
|
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
|
|
reg = <0x1e6e2000 0x1a8>;
|
|
|
|
p2a: p2a-control {
|
|
compatible = "aspeed,ast2400-p2a-ctrl";
|
|
memory-region = <&reserved_memory>;
|
|
};
|
|
};
|