1114 lines
28 KiB
C
1114 lines
28 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* Please use this file (iwl-dev.h) for driver implementation definitions.
|
|
* Please use iwl-commands.h for uCode API definitions.
|
|
*/
|
|
|
|
#ifndef __iwl_dev_h__
|
|
#define __iwl_dev_h__
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/slab.h>
|
|
#include <net/ieee80211_radiotap.h>
|
|
|
|
#include "iwl-eeprom.h"
|
|
#include "iwl-csr.h"
|
|
#include "iwl-prph.h"
|
|
#include "iwl-debug.h"
|
|
#include "iwl-agn-hw.h"
|
|
#include "iwl-led.h"
|
|
#include "iwl-power.h"
|
|
#include "iwl-agn-rs.h"
|
|
#include "iwl-agn-tt.h"
|
|
#include "iwl-bus.h"
|
|
#include "iwl-trans.h"
|
|
#include "iwl-shared.h"
|
|
|
|
struct iwl_tx_queue;
|
|
|
|
/* CT-KILL constants */
|
|
#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
|
|
#define CT_KILL_THRESHOLD 114 /* in Celsius */
|
|
#define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */
|
|
|
|
/* Default noise level to report when noise measurement is not available.
|
|
* This may be because we're:
|
|
* 1) Not associated no beacon statistics being sent to driver)
|
|
* 2) Scanning (noise measurement does not apply to associated channel)
|
|
* Use default noise value of -127 ... this is below the range of measurable
|
|
* Rx dBm for all agn devices, so it can indicate "unmeasurable" to user.
|
|
* Also, -127 works better than 0 when averaging frames with/without
|
|
* noise info (e.g. averaging might be done in app); measured dBm values are
|
|
* always negative ... using a negative value as the default keeps all
|
|
* averages within an s8's (used in some apps) range of negative values. */
|
|
#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
|
|
|
|
/*
|
|
* RTS threshold here is total size [2347] minus 4 FCS bytes
|
|
* Per spec:
|
|
* a value of 0 means RTS on all data/management packets
|
|
* a value > max MSDU size means no RTS
|
|
* else RTS for data/management frames where MPDU is larger
|
|
* than RTS value.
|
|
*/
|
|
#define DEFAULT_RTS_THRESHOLD 2347U
|
|
#define MIN_RTS_THRESHOLD 0U
|
|
#define MAX_RTS_THRESHOLD 2347U
|
|
#define MAX_MSDU_SIZE 2304U
|
|
#define MAX_MPDU_SIZE 2346U
|
|
#define DEFAULT_BEACON_INTERVAL 200U
|
|
#define DEFAULT_SHORT_RETRY_LIMIT 7U
|
|
#define DEFAULT_LONG_RETRY_LIMIT 4U
|
|
|
|
#define IWL_NUM_SCAN_RATES (2)
|
|
|
|
/*
|
|
* One for each channel, holds all channel setup data
|
|
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
|
|
* with one another!
|
|
*/
|
|
struct iwl_channel_info {
|
|
struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */
|
|
struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for
|
|
* HT40 channel */
|
|
|
|
u8 channel; /* channel number */
|
|
u8 flags; /* flags copied from EEPROM */
|
|
s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
|
|
s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */
|
|
s8 min_power; /* always 0 */
|
|
s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */
|
|
|
|
u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */
|
|
u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */
|
|
enum ieee80211_band band;
|
|
|
|
/* HT40 channel info */
|
|
s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
|
|
u8 ht40_flags; /* flags copied from EEPROM */
|
|
u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
|
|
};
|
|
|
|
/*
|
|
* Minimum number of queues. MAX_NUM is defined in hw specific files.
|
|
* Set the minimum to accommodate
|
|
* - 4 standard TX queues
|
|
* - the command queue
|
|
* - 4 PAN TX queues
|
|
* - the PAN multicast queue, and
|
|
* - the AUX (TX during scan dwell) queue.
|
|
*/
|
|
#define IWL_MIN_NUM_QUEUES 11
|
|
|
|
/*
|
|
* Command queue depends on iPAN support.
|
|
*/
|
|
#define IWL_DEFAULT_CMD_QUEUE_NUM 4
|
|
#define IWL_IPAN_CMD_QUEUE_NUM 9
|
|
|
|
#define IEEE80211_DATA_LEN 2304
|
|
#define IEEE80211_4ADDR_LEN 30
|
|
#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
|
|
#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
|
|
|
|
#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
|
|
#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
|
|
#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
|
|
|
|
#define IWL_SUPPORTED_RATES_IE_LEN 8
|
|
|
|
#define IWL_INVALID_RATE 0xFF
|
|
#define IWL_INVALID_VALUE -1
|
|
|
|
union iwl_ht_rate_supp {
|
|
u16 rates;
|
|
struct {
|
|
u8 siso_rate;
|
|
u8 mimo_rate;
|
|
};
|
|
};
|
|
|
|
#define CFG_HT_RX_AMPDU_FACTOR_8K (0x0)
|
|
#define CFG_HT_RX_AMPDU_FACTOR_16K (0x1)
|
|
#define CFG_HT_RX_AMPDU_FACTOR_32K (0x2)
|
|
#define CFG_HT_RX_AMPDU_FACTOR_64K (0x3)
|
|
#define CFG_HT_RX_AMPDU_FACTOR_DEF CFG_HT_RX_AMPDU_FACTOR_64K
|
|
#define CFG_HT_RX_AMPDU_FACTOR_MAX CFG_HT_RX_AMPDU_FACTOR_64K
|
|
#define CFG_HT_RX_AMPDU_FACTOR_MIN CFG_HT_RX_AMPDU_FACTOR_8K
|
|
|
|
/*
|
|
* Maximal MPDU density for TX aggregation
|
|
* 4 - 2us density
|
|
* 5 - 4us density
|
|
* 6 - 8us density
|
|
* 7 - 16us density
|
|
*/
|
|
#define CFG_HT_MPDU_DENSITY_2USEC (0x4)
|
|
#define CFG_HT_MPDU_DENSITY_4USEC (0x5)
|
|
#define CFG_HT_MPDU_DENSITY_8USEC (0x6)
|
|
#define CFG_HT_MPDU_DENSITY_16USEC (0x7)
|
|
#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
|
|
#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
|
|
#define CFG_HT_MPDU_DENSITY_MIN (0x1)
|
|
|
|
struct iwl_ht_config {
|
|
bool single_chain_sufficient;
|
|
enum ieee80211_smps_mode smps; /* current smps mode */
|
|
};
|
|
|
|
/* QoS structures */
|
|
struct iwl_qos_info {
|
|
int qos_active;
|
|
struct iwl_qosparam_cmd def_qos_parm;
|
|
};
|
|
|
|
/*
|
|
* Structure should be accessed with sta_lock held. When station addition
|
|
* is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
|
|
* the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
|
|
* held.
|
|
*/
|
|
struct iwl_station_entry {
|
|
struct iwl_addsta_cmd sta;
|
|
u8 used, ctxid;
|
|
struct iwl_link_quality_cmd *lq;
|
|
};
|
|
|
|
/*
|
|
* iwl_station_priv: Driver's private station information
|
|
*
|
|
* When mac80211 creates a station it reserves some space (hw->sta_data_size)
|
|
* in the structure for use by driver. This structure is places in that
|
|
* space.
|
|
*/
|
|
struct iwl_station_priv {
|
|
struct iwl_rxon_context *ctx;
|
|
struct iwl_lq_sta lq_sta;
|
|
atomic_t pending_frames;
|
|
bool client;
|
|
bool asleep;
|
|
u8 max_agg_bufsize;
|
|
u8 sta_id;
|
|
};
|
|
|
|
/**
|
|
* struct iwl_vif_priv - driver's private per-interface information
|
|
*
|
|
* When mac80211 allocates a virtual interface, it can allocate
|
|
* space for us to put data into.
|
|
*/
|
|
struct iwl_vif_priv {
|
|
struct iwl_rxon_context *ctx;
|
|
u8 ibss_bssid_sta_id;
|
|
};
|
|
|
|
/* v1/v2 uCode file layout */
|
|
struct iwl_ucode_header {
|
|
__le32 ver; /* major/minor/API/serial */
|
|
union {
|
|
struct {
|
|
__le32 inst_size; /* bytes of runtime code */
|
|
__le32 data_size; /* bytes of runtime data */
|
|
__le32 init_size; /* bytes of init code */
|
|
__le32 init_data_size; /* bytes of init data */
|
|
__le32 boot_size; /* bytes of bootstrap code */
|
|
u8 data[0]; /* in same order as sizes */
|
|
} v1;
|
|
struct {
|
|
__le32 build; /* build number */
|
|
__le32 inst_size; /* bytes of runtime code */
|
|
__le32 data_size; /* bytes of runtime data */
|
|
__le32 init_size; /* bytes of init code */
|
|
__le32 init_data_size; /* bytes of init data */
|
|
__le32 boot_size; /* bytes of bootstrap code */
|
|
u8 data[0]; /* in same order as sizes */
|
|
} v2;
|
|
} u;
|
|
};
|
|
|
|
/*
|
|
* new TLV uCode file layout
|
|
*
|
|
* The new TLV file format contains TLVs, that each specify
|
|
* some piece of data. To facilitate "groups", for example
|
|
* different instruction image with different capabilities,
|
|
* bundled with the same init image, an alternative mechanism
|
|
* is provided:
|
|
* When the alternative field is 0, that means that the item
|
|
* is always valid. When it is non-zero, then it is only
|
|
* valid in conjunction with items of the same alternative,
|
|
* in which case the driver (user) selects one alternative
|
|
* to use.
|
|
*/
|
|
|
|
enum iwl_ucode_tlv_type {
|
|
IWL_UCODE_TLV_INVALID = 0, /* unused */
|
|
IWL_UCODE_TLV_INST = 1,
|
|
IWL_UCODE_TLV_DATA = 2,
|
|
IWL_UCODE_TLV_INIT = 3,
|
|
IWL_UCODE_TLV_INIT_DATA = 4,
|
|
IWL_UCODE_TLV_BOOT = 5,
|
|
IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */
|
|
IWL_UCODE_TLV_PAN = 7,
|
|
IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
|
|
IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
|
|
IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
|
|
IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
|
|
IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
|
|
IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
|
|
IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
|
|
IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
|
|
IWL_UCODE_TLV_WOWLAN_INST = 16,
|
|
IWL_UCODE_TLV_WOWLAN_DATA = 17,
|
|
IWL_UCODE_TLV_FLAGS = 18,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_ucode_tlv_flag - ucode API flags
|
|
* @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
|
|
* was a separate TLV but moved here to save space.
|
|
* @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
|
|
* treats good CRC threshold as a boolean
|
|
* @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
|
|
* @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
|
|
*/
|
|
enum iwl_ucode_tlv_flag {
|
|
IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
|
|
IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
|
|
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
|
|
IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
|
|
};
|
|
|
|
struct iwl_ucode_tlv {
|
|
__le16 type; /* see above */
|
|
__le16 alternative; /* see comment */
|
|
__le32 length; /* not including type/length fields */
|
|
u8 data[0];
|
|
} __packed;
|
|
|
|
#define IWL_TLV_UCODE_MAGIC 0x0a4c5749
|
|
|
|
struct iwl_tlv_ucode_header {
|
|
/*
|
|
* The TLV style ucode header is distinguished from
|
|
* the v1/v2 style header by first four bytes being
|
|
* zero, as such is an invalid combination of
|
|
* major/minor/API/serial versions.
|
|
*/
|
|
__le32 zero;
|
|
__le32 magic;
|
|
u8 human_readable[64];
|
|
__le32 ver; /* major/minor/API/serial */
|
|
__le32 build;
|
|
__le64 alternatives; /* bitmask of valid alternatives */
|
|
/*
|
|
* The data contained herein has a TLV layout,
|
|
* see above for the TLV header and types.
|
|
* Note that each TLV is padded to a length
|
|
* that is a multiple of 4 for alignment.
|
|
*/
|
|
u8 data[0];
|
|
};
|
|
|
|
struct iwl_sensitivity_ranges {
|
|
u16 min_nrg_cck;
|
|
u16 max_nrg_cck;
|
|
|
|
u16 nrg_th_cck;
|
|
u16 nrg_th_ofdm;
|
|
|
|
u16 auto_corr_min_ofdm;
|
|
u16 auto_corr_min_ofdm_mrc;
|
|
u16 auto_corr_min_ofdm_x1;
|
|
u16 auto_corr_min_ofdm_mrc_x1;
|
|
|
|
u16 auto_corr_max_ofdm;
|
|
u16 auto_corr_max_ofdm_mrc;
|
|
u16 auto_corr_max_ofdm_x1;
|
|
u16 auto_corr_max_ofdm_mrc_x1;
|
|
|
|
u16 auto_corr_max_cck;
|
|
u16 auto_corr_max_cck_mrc;
|
|
u16 auto_corr_min_cck;
|
|
u16 auto_corr_min_cck_mrc;
|
|
|
|
u16 barker_corr_th_min;
|
|
u16 barker_corr_th_min_mrc;
|
|
u16 nrg_th_cca;
|
|
};
|
|
|
|
|
|
#define KELVIN_TO_CELSIUS(x) ((x)-273)
|
|
#define CELSIUS_TO_KELVIN(x) ((x)+273)
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Functions implemented in core module which are forward declared here
|
|
* for use by iwl-[4-5].c
|
|
*
|
|
* NOTE: The implementation of these functions are not hardware specific
|
|
* which is why they are in the core module files.
|
|
*
|
|
* Naming convention --
|
|
* iwl_ <-- Is part of iwlwifi
|
|
* iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
|
|
*
|
|
****************************************************************************/
|
|
extern void iwl_update_chain_flags(struct iwl_priv *priv);
|
|
extern const u8 iwl_bcast_addr[ETH_ALEN];
|
|
|
|
#define IWL_OPERATION_MODE_AUTO 0
|
|
#define IWL_OPERATION_MODE_HT_ONLY 1
|
|
#define IWL_OPERATION_MODE_MIXED 2
|
|
#define IWL_OPERATION_MODE_20MHZ 3
|
|
|
|
#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
|
|
|
|
/* Sensitivity and chain noise calibration */
|
|
#define INITIALIZATION_VALUE 0xFFFF
|
|
#define IWL_CAL_NUM_BEACONS 16
|
|
#define MAXIMUM_ALLOWED_PATHLOSS 15
|
|
|
|
#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
|
|
|
|
#define MAX_FA_OFDM 50
|
|
#define MIN_FA_OFDM 5
|
|
#define MAX_FA_CCK 50
|
|
#define MIN_FA_CCK 5
|
|
|
|
#define AUTO_CORR_STEP_OFDM 1
|
|
|
|
#define AUTO_CORR_STEP_CCK 3
|
|
#define AUTO_CORR_MAX_TH_CCK 160
|
|
|
|
#define NRG_DIFF 2
|
|
#define NRG_STEP_CCK 2
|
|
#define NRG_MARGIN 8
|
|
#define MAX_NUMBER_CCK_NO_FA 100
|
|
|
|
#define AUTO_CORR_CCK_MIN_VAL_DEF (125)
|
|
|
|
#define CHAIN_A 0
|
|
#define CHAIN_B 1
|
|
#define CHAIN_C 2
|
|
#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
|
|
#define ALL_BAND_FILTER 0xFF00
|
|
#define IN_BAND_FILTER 0xFF
|
|
#define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF
|
|
|
|
#define NRG_NUM_PREV_STAT_L 20
|
|
#define NUM_RX_CHAINS 3
|
|
|
|
enum iwlagn_false_alarm_state {
|
|
IWL_FA_TOO_MANY = 0,
|
|
IWL_FA_TOO_FEW = 1,
|
|
IWL_FA_GOOD_RANGE = 2,
|
|
};
|
|
|
|
enum iwlagn_chain_noise_state {
|
|
IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */
|
|
IWL_CHAIN_NOISE_ACCUMULATE,
|
|
IWL_CHAIN_NOISE_CALIBRATED,
|
|
IWL_CHAIN_NOISE_DONE,
|
|
};
|
|
|
|
|
|
/* Opaque calibration results */
|
|
struct iwl_calib_result {
|
|
struct list_head list;
|
|
size_t cmd_len;
|
|
struct iwl_calib_hdr hdr;
|
|
/* data follows */
|
|
};
|
|
|
|
/* Sensitivity calib data */
|
|
struct iwl_sensitivity_data {
|
|
u32 auto_corr_ofdm;
|
|
u32 auto_corr_ofdm_mrc;
|
|
u32 auto_corr_ofdm_x1;
|
|
u32 auto_corr_ofdm_mrc_x1;
|
|
u32 auto_corr_cck;
|
|
u32 auto_corr_cck_mrc;
|
|
|
|
u32 last_bad_plcp_cnt_ofdm;
|
|
u32 last_fa_cnt_ofdm;
|
|
u32 last_bad_plcp_cnt_cck;
|
|
u32 last_fa_cnt_cck;
|
|
|
|
u32 nrg_curr_state;
|
|
u32 nrg_prev_state;
|
|
u32 nrg_value[10];
|
|
u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
|
|
u32 nrg_silence_ref;
|
|
u32 nrg_energy_idx;
|
|
u32 nrg_silence_idx;
|
|
u32 nrg_th_cck;
|
|
s32 nrg_auto_corr_silence_diff;
|
|
u32 num_in_cck_no_fa;
|
|
u32 nrg_th_ofdm;
|
|
|
|
u16 barker_corr_th_min;
|
|
u16 barker_corr_th_min_mrc;
|
|
u16 nrg_th_cca;
|
|
};
|
|
|
|
/* Chain noise (differential Rx gain) calib data */
|
|
struct iwl_chain_noise_data {
|
|
u32 active_chains;
|
|
u32 chain_noise_a;
|
|
u32 chain_noise_b;
|
|
u32 chain_noise_c;
|
|
u32 chain_signal_a;
|
|
u32 chain_signal_b;
|
|
u32 chain_signal_c;
|
|
u16 beacon_count;
|
|
u8 disconn_array[NUM_RX_CHAINS];
|
|
u8 delta_gain_code[NUM_RX_CHAINS];
|
|
u8 radio_write;
|
|
u8 state;
|
|
};
|
|
|
|
#define EEPROM_SEM_TIMEOUT 10 /* milliseconds */
|
|
#define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
|
|
|
|
enum {
|
|
MEASUREMENT_READY = (1 << 0),
|
|
MEASUREMENT_ACTIVE = (1 << 1),
|
|
};
|
|
|
|
enum iwl_nvm_type {
|
|
NVM_DEVICE_TYPE_EEPROM = 0,
|
|
NVM_DEVICE_TYPE_OTP,
|
|
};
|
|
|
|
/*
|
|
* Two types of OTP memory access modes
|
|
* IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
|
|
* based on physical memory addressing
|
|
* IWL_OTP_ACCESS_RELATIVE - relative address mode,
|
|
* based on logical memory addressing
|
|
*/
|
|
enum iwl_access_mode {
|
|
IWL_OTP_ACCESS_ABSOLUTE,
|
|
IWL_OTP_ACCESS_RELATIVE,
|
|
};
|
|
|
|
/**
|
|
* enum iwl_pa_type - Power Amplifier type
|
|
* @IWL_PA_SYSTEM: based on uCode configuration
|
|
* @IWL_PA_INTERNAL: use Internal only
|
|
*/
|
|
enum iwl_pa_type {
|
|
IWL_PA_SYSTEM = 0,
|
|
IWL_PA_INTERNAL = 1,
|
|
};
|
|
|
|
/* reply_tx_statistics (for _agn devices) */
|
|
struct reply_tx_error_statistics {
|
|
u32 pp_delay;
|
|
u32 pp_few_bytes;
|
|
u32 pp_bt_prio;
|
|
u32 pp_quiet_period;
|
|
u32 pp_calc_ttak;
|
|
u32 int_crossed_retry;
|
|
u32 short_limit;
|
|
u32 long_limit;
|
|
u32 fifo_underrun;
|
|
u32 drain_flow;
|
|
u32 rfkill_flush;
|
|
u32 life_expire;
|
|
u32 dest_ps;
|
|
u32 host_abort;
|
|
u32 bt_retry;
|
|
u32 sta_invalid;
|
|
u32 frag_drop;
|
|
u32 tid_disable;
|
|
u32 fifo_flush;
|
|
u32 insuff_cf_poll;
|
|
u32 fail_hw_drop;
|
|
u32 sta_color_mismatch;
|
|
u32 unknown;
|
|
};
|
|
|
|
/* reply_agg_tx_statistics (for _agn devices) */
|
|
struct reply_agg_tx_error_statistics {
|
|
u32 underrun;
|
|
u32 bt_prio;
|
|
u32 few_bytes;
|
|
u32 abort;
|
|
u32 last_sent_ttl;
|
|
u32 last_sent_try;
|
|
u32 last_sent_bt_kill;
|
|
u32 scd_query;
|
|
u32 bad_crc32;
|
|
u32 response;
|
|
u32 dump_tx;
|
|
u32 delay_tx;
|
|
u32 unknown;
|
|
};
|
|
|
|
/* management statistics */
|
|
enum iwl_mgmt_stats {
|
|
MANAGEMENT_ASSOC_REQ = 0,
|
|
MANAGEMENT_ASSOC_RESP,
|
|
MANAGEMENT_REASSOC_REQ,
|
|
MANAGEMENT_REASSOC_RESP,
|
|
MANAGEMENT_PROBE_REQ,
|
|
MANAGEMENT_PROBE_RESP,
|
|
MANAGEMENT_BEACON,
|
|
MANAGEMENT_ATIM,
|
|
MANAGEMENT_DISASSOC,
|
|
MANAGEMENT_AUTH,
|
|
MANAGEMENT_DEAUTH,
|
|
MANAGEMENT_ACTION,
|
|
MANAGEMENT_MAX,
|
|
};
|
|
/* control statistics */
|
|
enum iwl_ctrl_stats {
|
|
CONTROL_BACK_REQ = 0,
|
|
CONTROL_BACK,
|
|
CONTROL_PSPOLL,
|
|
CONTROL_RTS,
|
|
CONTROL_CTS,
|
|
CONTROL_ACK,
|
|
CONTROL_CFEND,
|
|
CONTROL_CFENDACK,
|
|
CONTROL_MAX,
|
|
};
|
|
|
|
struct traffic_stats {
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
u32 mgmt[MANAGEMENT_MAX];
|
|
u32 ctrl[CONTROL_MAX];
|
|
u32 data_cnt;
|
|
u64 data_bytes;
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
|
|
* to perform continuous uCode event logging operation if enabled
|
|
*/
|
|
#define UCODE_TRACE_PERIOD (100)
|
|
|
|
/*
|
|
* iwl_event_log: current uCode event log position
|
|
*
|
|
* @ucode_trace: enable/disable ucode continuous trace timer
|
|
* @num_wraps: how many times the event buffer wraps
|
|
* @next_entry: the entry just before the next one that uCode would fill
|
|
* @non_wraps_count: counter for no wrap detected when dump ucode events
|
|
* @wraps_once_count: counter for wrap once detected when dump ucode events
|
|
* @wraps_more_count: counter for wrap more than once detected
|
|
* when dump ucode events
|
|
*/
|
|
struct iwl_event_log {
|
|
bool ucode_trace;
|
|
u32 num_wraps;
|
|
u32 next_entry;
|
|
int non_wraps_count;
|
|
int wraps_once_count;
|
|
int wraps_more_count;
|
|
};
|
|
|
|
/*
|
|
* This is the threshold value of plcp error rate per 100mSecs. It is
|
|
* used to set and check for the validity of plcp_delta.
|
|
*/
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (1)
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50)
|
|
#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100)
|
|
#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200)
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255)
|
|
#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE (0)
|
|
|
|
#define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3)
|
|
#define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
|
|
|
|
/* TX queue watchdog timeouts in mSecs */
|
|
#define IWL_DEF_WD_TIMEOUT (2000)
|
|
#define IWL_LONG_WD_TIMEOUT (10000)
|
|
#define IWL_MAX_WD_TIMEOUT (120000)
|
|
|
|
/* BT Antenna Coupling Threshold (dB) */
|
|
#define IWL_BT_ANTENNA_COUPLING_THRESHOLD (35)
|
|
|
|
/* Firmware reload counter and Timestamp */
|
|
#define IWL_MIN_RELOAD_DURATION 1000 /* 1000 ms */
|
|
#define IWL_MAX_CONTINUE_RELOAD_CNT 4
|
|
|
|
|
|
enum iwl_reset {
|
|
IWL_RF_RESET = 0,
|
|
IWL_FW_RESET,
|
|
IWL_MAX_FORCE_RESET,
|
|
};
|
|
|
|
struct iwl_force_reset {
|
|
int reset_request_count;
|
|
int reset_success_count;
|
|
int reset_reject_count;
|
|
unsigned long reset_duration;
|
|
unsigned long last_force_reset_jiffies;
|
|
};
|
|
|
|
/* extend beacon time format bit shifting */
|
|
/*
|
|
* for _agn devices
|
|
* bits 31:22 - extended
|
|
* bits 21:0 - interval
|
|
*/
|
|
#define IWLAGN_EXT_BEACON_TIME_POS 22
|
|
|
|
struct iwl_rxon_context {
|
|
struct ieee80211_vif *vif;
|
|
|
|
/*
|
|
* We could use the vif to indicate active, but we
|
|
* also need it to be active during disabling when
|
|
* we already removed the vif for type setting.
|
|
*/
|
|
bool always_active, is_active;
|
|
|
|
bool ht_need_multiple_chains;
|
|
|
|
enum iwl_rxon_context_id ctxid;
|
|
|
|
u32 interface_modes, exclusive_interface_modes;
|
|
u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
|
|
|
|
/*
|
|
* We declare this const so it can only be
|
|
* changed via explicit cast within the
|
|
* routines that actually update the physical
|
|
* hardware.
|
|
*/
|
|
const struct iwl_rxon_cmd active;
|
|
struct iwl_rxon_cmd staging;
|
|
|
|
struct iwl_rxon_time_cmd timing;
|
|
|
|
struct iwl_qos_info qos_data;
|
|
|
|
u8 bcast_sta_id, ap_sta_id;
|
|
|
|
u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
|
|
u8 qos_cmd;
|
|
u8 wep_key_cmd;
|
|
|
|
struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
|
|
u8 key_mapping_keys;
|
|
|
|
__le32 station_flags;
|
|
|
|
int beacon_int;
|
|
|
|
struct {
|
|
bool non_gf_sta_present;
|
|
u8 protection;
|
|
bool enabled, is_40mhz;
|
|
u8 extension_chan_offset;
|
|
} ht;
|
|
|
|
u8 bssid[ETH_ALEN];
|
|
bool preauth_bssid;
|
|
|
|
bool last_tx_rejected;
|
|
};
|
|
|
|
enum iwl_scan_type {
|
|
IWL_SCAN_NORMAL,
|
|
IWL_SCAN_RADIO_RESET,
|
|
IWL_SCAN_ROC,
|
|
};
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
|
|
struct iwl_testmode_trace {
|
|
u32 buff_size;
|
|
u32 total_size;
|
|
u32 num_chunks;
|
|
u8 *cpu_addr;
|
|
u8 *trace_addr;
|
|
dma_addr_t dma_addr;
|
|
bool trace_enabled;
|
|
};
|
|
struct iwl_testmode_sram {
|
|
u32 buff_size;
|
|
u32 num_chunks;
|
|
u8 *buff_addr;
|
|
bool sram_readed;
|
|
};
|
|
#endif
|
|
|
|
struct iwl_wipan_noa_data {
|
|
struct rcu_head rcu_head;
|
|
u32 length;
|
|
u8 data[];
|
|
};
|
|
|
|
struct iwl_priv {
|
|
|
|
/*data shared among all the driver's layers */
|
|
struct iwl_shared _shrd;
|
|
struct iwl_shared *shrd;
|
|
|
|
/* ieee device used by generic ieee processing code */
|
|
struct ieee80211_hw *hw;
|
|
struct ieee80211_channel *ieee_channels;
|
|
struct ieee80211_rate *ieee_rates;
|
|
struct kmem_cache *tx_cmd_pool;
|
|
struct iwl_cfg *cfg;
|
|
|
|
enum ieee80211_band band;
|
|
|
|
void (*pre_rx_handler)(struct iwl_priv *priv,
|
|
struct iwl_rx_mem_buffer *rxb);
|
|
int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
|
|
struct iwl_rx_mem_buffer *rxb,
|
|
struct iwl_device_cmd *cmd);
|
|
|
|
struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
|
|
|
|
/* spectrum measurement report caching */
|
|
struct iwl_spectrum_notification measure_report;
|
|
u8 measurement_status;
|
|
|
|
/* ucode beacon time */
|
|
u32 ucode_beacon_time;
|
|
int missed_beacon_threshold;
|
|
|
|
/* track IBSS manager (last beacon) status */
|
|
u32 ibss_manager;
|
|
|
|
/* jiffies when last recovery from statistics was performed */
|
|
unsigned long rx_statistics_jiffies;
|
|
|
|
/*counters */
|
|
u32 rx_handlers_stats[REPLY_MAX];
|
|
|
|
/* force reset */
|
|
struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
|
|
|
|
/* firmware reload counter and timestamp */
|
|
unsigned long reload_jiffies;
|
|
int reload_count;
|
|
|
|
/* we allocate array of iwl_channel_info for NIC's valid channels.
|
|
* Access via channel # using indirect index array */
|
|
struct iwl_channel_info *channel_info; /* channel info array */
|
|
u8 channel_count; /* # of channels */
|
|
|
|
/* thermal calibration */
|
|
s32 temperature; /* Celsius */
|
|
s32 last_temperature;
|
|
|
|
/* init calibration results */
|
|
struct list_head calib_results;
|
|
|
|
struct iwl_wipan_noa_data __rcu *noa_data;
|
|
|
|
/* Scan related variables */
|
|
unsigned long scan_start;
|
|
unsigned long scan_start_tsf;
|
|
void *scan_cmd;
|
|
enum ieee80211_band scan_band;
|
|
struct cfg80211_scan_request *scan_request;
|
|
struct ieee80211_vif *scan_vif;
|
|
enum iwl_scan_type scan_type;
|
|
u8 scan_tx_ant[IEEE80211_NUM_BANDS];
|
|
u8 mgmt_tx_ant;
|
|
|
|
/* max number of station keys */
|
|
u8 sta_key_max_num;
|
|
|
|
bool new_scan_threshold_behaviour;
|
|
|
|
/* EEPROM MAC addresses */
|
|
struct mac_address addresses[2];
|
|
|
|
/* uCode images, save to reload in case of failure */
|
|
int fw_index; /* firmware we're trying to load */
|
|
u32 ucode_ver; /* version of ucode, copy of
|
|
iwl_ucode.ver */
|
|
|
|
char firmware_name[25];
|
|
|
|
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
|
|
|
|
__le16 switch_channel;
|
|
|
|
u16 active_rate;
|
|
|
|
u8 start_calib;
|
|
struct iwl_sensitivity_data sensitivity_data;
|
|
struct iwl_chain_noise_data chain_noise_data;
|
|
bool enhance_sensitivity_table;
|
|
__le16 sensitivity_tbl[HD_TABLE_SIZE];
|
|
__le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
|
|
|
|
struct iwl_ht_config current_ht_config;
|
|
|
|
/* Rate scaling data */
|
|
u8 retry_rate;
|
|
|
|
int activity_timer_active;
|
|
|
|
/* counts mgmt, ctl, and data packets */
|
|
struct traffic_stats tx_stats;
|
|
struct traffic_stats rx_stats;
|
|
|
|
struct iwl_power_mgr power_data;
|
|
struct iwl_tt_mgmt thermal_throttle;
|
|
|
|
/* station table variables */
|
|
int num_stations;
|
|
struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
|
|
unsigned long ucode_key_table;
|
|
|
|
u8 mac80211_registered;
|
|
|
|
/* Indication if ieee80211_ops->open has been called */
|
|
u8 is_open;
|
|
|
|
enum nl80211_iftype iw_mode;
|
|
|
|
/* Last Rx'd beacon timestamp */
|
|
u64 timestamp;
|
|
|
|
struct {
|
|
__le32 flag;
|
|
struct statistics_general_common common;
|
|
struct statistics_rx_non_phy rx_non_phy;
|
|
struct statistics_rx_phy rx_ofdm;
|
|
struct statistics_rx_ht_phy rx_ofdm_ht;
|
|
struct statistics_rx_phy rx_cck;
|
|
struct statistics_tx tx;
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
struct statistics_bt_activity bt_activity;
|
|
__le32 num_bt_kills, accum_num_bt_kills;
|
|
#endif
|
|
} statistics;
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
struct {
|
|
struct statistics_general_common common;
|
|
struct statistics_rx_non_phy rx_non_phy;
|
|
struct statistics_rx_phy rx_ofdm;
|
|
struct statistics_rx_ht_phy rx_ofdm_ht;
|
|
struct statistics_rx_phy rx_cck;
|
|
struct statistics_tx tx;
|
|
struct statistics_bt_activity bt_activity;
|
|
} accum_stats, delta_stats, max_delta_stats;
|
|
#endif
|
|
|
|
/*
|
|
* reporting the number of tids has AGG on. 0 means
|
|
* no AGGREGATION
|
|
*/
|
|
u8 agg_tids_count;
|
|
|
|
struct iwl_rx_phy_res last_phy_res;
|
|
bool last_phy_res_valid;
|
|
|
|
struct completion firmware_loading_complete;
|
|
|
|
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
|
|
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
|
|
|
|
/*
|
|
* chain noise reset and gain commands are the
|
|
* two extra calibration commands follows the standard
|
|
* phy calibration commands
|
|
*/
|
|
u8 phy_calib_chain_noise_reset_cmd;
|
|
u8 phy_calib_chain_noise_gain_cmd;
|
|
|
|
/* counts reply_tx error */
|
|
struct reply_tx_error_statistics reply_tx_stats;
|
|
struct reply_agg_tx_error_statistics reply_agg_tx_stats;
|
|
|
|
/* remain-on-channel offload support */
|
|
struct ieee80211_channel *hw_roc_channel;
|
|
struct delayed_work hw_roc_disable_work;
|
|
enum nl80211_channel_type hw_roc_chantype;
|
|
int hw_roc_duration;
|
|
bool hw_roc_setup, hw_roc_start_notified;
|
|
|
|
/* bt coex */
|
|
u8 bt_enable_flag;
|
|
u8 bt_status;
|
|
u8 bt_traffic_load, last_bt_traffic_load;
|
|
bool bt_ch_announce;
|
|
bool bt_full_concurrent;
|
|
bool bt_ant_couple_ok;
|
|
__le32 kill_ack_mask;
|
|
__le32 kill_cts_mask;
|
|
__le16 bt_valid;
|
|
u16 bt_on_thresh;
|
|
u16 bt_duration;
|
|
u16 dynamic_frag_thresh;
|
|
u8 bt_ci_compliance;
|
|
struct work_struct bt_traffic_change_work;
|
|
bool bt_enable_pspoll;
|
|
struct iwl_rxon_context *cur_rssi_ctx;
|
|
bool bt_is_sco;
|
|
|
|
struct work_struct restart;
|
|
struct work_struct scan_completed;
|
|
struct work_struct abort_scan;
|
|
|
|
struct work_struct beacon_update;
|
|
struct iwl_rxon_context *beacon_ctx;
|
|
struct sk_buff *beacon_skb;
|
|
void *beacon_cmd;
|
|
|
|
struct work_struct tt_work;
|
|
struct work_struct ct_enter;
|
|
struct work_struct ct_exit;
|
|
struct work_struct start_internal_scan;
|
|
struct work_struct tx_flush;
|
|
struct work_struct bt_full_concurrency;
|
|
struct work_struct bt_runtime_config;
|
|
|
|
struct delayed_work scan_check;
|
|
|
|
/* TX Power */
|
|
s8 tx_power_user_lmt;
|
|
s8 tx_power_device_lmt;
|
|
s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
|
|
s8 tx_power_next;
|
|
|
|
#ifdef CONFIG_IWLWIFI_DEBUGFS
|
|
/* debugfs */
|
|
u16 tx_traffic_idx;
|
|
u16 rx_traffic_idx;
|
|
u8 *tx_traffic;
|
|
u8 *rx_traffic;
|
|
struct dentry *debugfs_dir;
|
|
u32 dbgfs_sram_offset, dbgfs_sram_len;
|
|
bool disable_ht40;
|
|
void *wowlan_sram;
|
|
#endif /* CONFIG_IWLWIFI_DEBUGFS */
|
|
|
|
struct work_struct txpower_work;
|
|
u32 disable_sens_cal;
|
|
u32 disable_chain_noise_cal;
|
|
struct work_struct run_time_calib_work;
|
|
struct timer_list statistics_periodic;
|
|
struct timer_list ucode_trace;
|
|
struct timer_list watchdog;
|
|
|
|
struct iwl_event_log event_log;
|
|
|
|
struct led_classdev led;
|
|
unsigned long blink_on, blink_off;
|
|
bool led_registered;
|
|
#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
|
|
struct iwl_testmode_trace testmode_trace;
|
|
struct iwl_testmode_sram testmode_sram;
|
|
u32 tm_fixed_rate;
|
|
#endif
|
|
|
|
/* WoWLAN GTK rekey data */
|
|
u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
|
|
__le64 replay_ctr;
|
|
__le16 last_seq_ctl;
|
|
bool have_rekey_data;
|
|
}; /*iwl_priv */
|
|
|
|
extern struct iwl_mod_params iwlagn_mod_params;
|
|
|
|
static inline struct iwl_rxon_context *
|
|
iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
|
|
{
|
|
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
|
|
|
|
return vif_priv->ctx;
|
|
}
|
|
|
|
#define for_each_context(priv, ctx) \
|
|
for (ctx = &priv->contexts[IWL_RXON_CTX_BSS]; \
|
|
ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++) \
|
|
if (priv->shrd->valid_contexts & BIT(ctx->ctxid))
|
|
|
|
static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
|
|
{
|
|
return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
|
|
}
|
|
|
|
static inline int iwl_is_associated(struct iwl_priv *priv,
|
|
enum iwl_rxon_context_id ctxid)
|
|
{
|
|
return iwl_is_associated_ctx(&priv->contexts[ctxid]);
|
|
}
|
|
|
|
static inline int iwl_is_any_associated(struct iwl_priv *priv)
|
|
{
|
|
struct iwl_rxon_context *ctx;
|
|
for_each_context(priv, ctx)
|
|
if (iwl_is_associated_ctx(ctx))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
|
|
{
|
|
if (ch_info == NULL)
|
|
return 0;
|
|
return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
|
|
}
|
|
|
|
static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
|
|
{
|
|
return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
|
|
}
|
|
|
|
static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
|
|
{
|
|
return ch_info->band == IEEE80211_BAND_5GHZ;
|
|
}
|
|
|
|
static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
|
|
{
|
|
return ch_info->band == IEEE80211_BAND_2GHZ;
|
|
}
|
|
|
|
static inline int is_channel_passive(const struct iwl_channel_info *ch)
|
|
{
|
|
return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
|
|
}
|
|
|
|
static inline int is_channel_ibss(const struct iwl_channel_info *ch)
|
|
{
|
|
return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
|
|
}
|
|
|
|
#endif /* __iwl_dev_h__ */
|