543 lines
14 KiB
C
543 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* drivers/net/phy/realtek.c
|
|
*
|
|
* Driver for Realtek PHYs
|
|
*
|
|
* Author: Johnson Leung <r58129@freescale.com>
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
|
|
#define RTL821x_PHYSR 0x11
|
|
#define RTL821x_PHYSR_DUPLEX BIT(13)
|
|
#define RTL821x_PHYSR_SPEED GENMASK(15, 14)
|
|
|
|
#define RTL821x_INER 0x12
|
|
#define RTL8211B_INER_INIT 0x6400
|
|
#define RTL8211E_INER_LINK_STATUS BIT(10)
|
|
#define RTL8211F_INER_LINK_STATUS BIT(4)
|
|
|
|
#define RTL821x_INSR 0x13
|
|
|
|
#define RTL821x_EXT_PAGE_SELECT 0x1e
|
|
#define RTL821x_PAGE_SELECT 0x1f
|
|
|
|
#define RTL8211F_INSR 0x1d
|
|
|
|
#define RTL8211F_TX_DELAY BIT(8)
|
|
#define RTL8211E_TX_DELAY BIT(1)
|
|
#define RTL8211E_RX_DELAY BIT(2)
|
|
#define RTL8211E_MODE_MII_GMII BIT(3)
|
|
|
|
#define RTL8201F_ISR 0x1e
|
|
#define RTL8201F_IER 0x13
|
|
|
|
#define RTL8366RB_POWER_SAVE 0x15
|
|
#define RTL8366RB_POWER_SAVE_ON BIT(12)
|
|
|
|
#define RTL_SUPPORTS_5000FULL BIT(14)
|
|
#define RTL_SUPPORTS_2500FULL BIT(13)
|
|
#define RTL_SUPPORTS_10000FULL BIT(0)
|
|
#define RTL_ADV_2500FULL BIT(7)
|
|
#define RTL_LPADV_10000FULL BIT(11)
|
|
#define RTL_LPADV_5000FULL BIT(6)
|
|
#define RTL_LPADV_2500FULL BIT(5)
|
|
|
|
#define RTL_GENERIC_PHYID 0x001cc800
|
|
|
|
MODULE_DESCRIPTION("Realtek PHY driver");
|
|
MODULE_AUTHOR("Johnson Leung");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int rtl821x_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, RTL821x_PAGE_SELECT);
|
|
}
|
|
|
|
static int rtl821x_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
|
|
}
|
|
|
|
static int rtl8201_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, RTL8201F_ISR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl821x_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, RTL821x_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8201_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
val = BIT(13) | BIT(12) | BIT(11);
|
|
else
|
|
val = 0;
|
|
|
|
return phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
|
|
}
|
|
|
|
static int rtl8211b_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211B_INER_INIT);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211e_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211E_INER_LINK_STATUS);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211f_config_intr(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
val = RTL8211F_INER_LINK_STATUS;
|
|
else
|
|
val = 0;
|
|
|
|
return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
|
|
}
|
|
|
|
static int rtl8211_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_config_aneg(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Quirk was copied from vendor driver. Unfortunately it includes no
|
|
* description of the magic numbers.
|
|
*/
|
|
if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) {
|
|
phy_write(phydev, 0x17, 0x2138);
|
|
phy_write(phydev, 0x0e, 0x0260);
|
|
} else {
|
|
phy_write(phydev, 0x17, 0x2108);
|
|
phy_write(phydev, 0x0e, 0x0000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8211c_config_init(struct phy_device *phydev)
|
|
{
|
|
/* RTL8211C has an issue when operating in Gigabit slave mode */
|
|
return phy_set_bits(phydev, MII_CTRL1000,
|
|
CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
|
|
}
|
|
|
|
static int rtl8211f_config_init(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
|
|
/* enable TX-delay for rgmii-{id,txid}, and disable it for rgmii and
|
|
* rgmii-rxid. The RX-delay can be enabled by the external RXDLY pin.
|
|
*/
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
val = 0;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
val = RTL8211F_TX_DELAY;
|
|
break;
|
|
default: /* the rest of the modes imply leaving delay as is. */
|
|
return 0;
|
|
}
|
|
|
|
return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
|
|
}
|
|
|
|
static int rtl8211e_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret = 0, oldpage;
|
|
u16 val;
|
|
|
|
/* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */
|
|
switch (phydev->interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
val = 0;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
val = RTL8211E_TX_DELAY | RTL8211E_RX_DELAY;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
val = RTL8211E_RX_DELAY;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
val = RTL8211E_TX_DELAY;
|
|
break;
|
|
default: /* the rest of the modes imply leaving delays as is. */
|
|
return 0;
|
|
}
|
|
|
|
/* According to a sample driver there is a 0x1c config register on the
|
|
* 0xa4 extension page (0x7) layout. It can be used to disable/enable
|
|
* the RX/TX delays otherwise controlled by RXDLY/TXDLY pins. It can
|
|
* also be used to customize the whole configuration register:
|
|
* 8:6 = PHY Address, 5:4 = Auto-Negotiation, 3 = Interface Mode Select,
|
|
* 2 = RX Delay, 1 = TX Delay, 0 = SELRGV (see original PHY datasheet
|
|
* for details).
|
|
*/
|
|
oldpage = phy_select_page(phydev, 0x7);
|
|
if (oldpage < 0)
|
|
goto err_restore_page;
|
|
|
|
ret = __phy_write(phydev, RTL821x_EXT_PAGE_SELECT, 0xa4);
|
|
if (ret)
|
|
goto err_restore_page;
|
|
|
|
ret = __phy_modify(phydev, 0x1c, RTL8211E_TX_DELAY | RTL8211E_RX_DELAY,
|
|
val);
|
|
|
|
err_restore_page:
|
|
return phy_restore_page(phydev, oldpage, ret);
|
|
}
|
|
|
|
static int rtl8211b_suspend(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MII_MMD_DATA, BIT(9));
|
|
|
|
return genphy_suspend(phydev);
|
|
}
|
|
|
|
static int rtl8211b_resume(struct phy_device *phydev)
|
|
{
|
|
phy_write(phydev, MII_MMD_DATA, 0);
|
|
|
|
return genphy_resume(phydev);
|
|
}
|
|
|
|
static int rtl8366rb_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
|
|
RTL8366RB_POWER_SAVE_ON);
|
|
if (ret) {
|
|
dev_err(&phydev->mdio.dev,
|
|
"error enabling power management\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
|
|
{
|
|
int ret;
|
|
|
|
if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE) {
|
|
rtl821x_write_page(phydev, 0xa5c);
|
|
ret = __phy_read(phydev, 0x12);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) {
|
|
rtl821x_write_page(phydev, 0xa5d);
|
|
ret = __phy_read(phydev, 0x10);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE) {
|
|
rtl821x_write_page(phydev, 0xa5d);
|
|
ret = __phy_read(phydev, 0x11);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else {
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
|
|
u16 val)
|
|
{
|
|
int ret;
|
|
|
|
if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) {
|
|
rtl821x_write_page(phydev, 0xa5d);
|
|
ret = __phy_write(phydev, 0x10, val);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else {
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
|
|
{
|
|
int ret = rtlgen_read_mmd(phydev, devnum, regnum);
|
|
|
|
if (ret != -EOPNOTSUPP)
|
|
return ret;
|
|
|
|
if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE2) {
|
|
rtl821x_write_page(phydev, 0xa6e);
|
|
ret = __phy_read(phydev, 0x16);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) {
|
|
rtl821x_write_page(phydev, 0xa6d);
|
|
ret = __phy_read(phydev, 0x12);
|
|
rtl821x_write_page(phydev, 0);
|
|
} else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE2) {
|
|
rtl821x_write_page(phydev, 0xa6d);
|
|
ret = __phy_read(phydev, 0x10);
|
|
rtl821x_write_page(phydev, 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum,
|
|
u16 val)
|
|
{
|
|
int ret = rtlgen_write_mmd(phydev, devnum, regnum, val);
|
|
|
|
if (ret != -EOPNOTSUPP)
|
|
return ret;
|
|
|
|
if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) {
|
|
rtl821x_write_page(phydev, 0xa6d);
|
|
ret = __phy_write(phydev, 0x12, val);
|
|
rtl821x_write_page(phydev, 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8125_get_features(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read_paged(phydev, 0xa61, 0x13);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
phydev->supported, val & RTL_SUPPORTS_2500FULL);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
phydev->supported, val & RTL_SUPPORTS_5000FULL);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
|
|
phydev->supported, val & RTL_SUPPORTS_10000FULL);
|
|
|
|
return genphy_read_abilities(phydev);
|
|
}
|
|
|
|
static int rtl8125_config_aneg(struct phy_device *phydev)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
u16 adv2500 = 0;
|
|
|
|
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
phydev->advertising))
|
|
adv2500 = RTL_ADV_2500FULL;
|
|
|
|
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
|
|
RTL_ADV_2500FULL, adv2500);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return __genphy_config_aneg(phydev, ret);
|
|
}
|
|
|
|
static int rtl8125_read_status(struct phy_device *phydev)
|
|
{
|
|
if (phydev->autoneg == AUTONEG_ENABLE) {
|
|
int lpadv = phy_read_paged(phydev, 0xa5d, 0x13);
|
|
|
|
if (lpadv < 0)
|
|
return lpadv;
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
|
|
phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
|
|
}
|
|
|
|
return genphy_read_status(phydev);
|
|
}
|
|
|
|
static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
phy_write(phydev, RTL821x_PAGE_SELECT, 0xa61);
|
|
val = phy_read(phydev, 0x13);
|
|
phy_write(phydev, RTL821x_PAGE_SELECT, 0);
|
|
|
|
return val >= 0 && val & RTL_SUPPORTS_2500FULL;
|
|
}
|
|
|
|
static int rtlgen_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
return phydev->phy_id == RTL_GENERIC_PHYID &&
|
|
!rtlgen_supports_2_5gbps(phydev);
|
|
}
|
|
|
|
static int rtl8125_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
return phydev->phy_id == RTL_GENERIC_PHYID &&
|
|
rtlgen_supports_2_5gbps(phydev);
|
|
}
|
|
|
|
static struct phy_driver realtek_drvs[] = {
|
|
{
|
|
PHY_ID_MATCH_EXACT(0x00008201),
|
|
.name = "RTL8201CP Ethernet",
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc816),
|
|
.name = "RTL8201F Fast Ethernet",
|
|
.ack_interrupt = &rtl8201_ack_interrupt,
|
|
.config_intr = &rtl8201_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc910),
|
|
.name = "RTL8211 Gigabit Ethernet",
|
|
.config_aneg = rtl8211_config_aneg,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc912),
|
|
.name = "RTL8211B Gigabit Ethernet",
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211b_config_intr,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
.suspend = rtl8211b_suspend,
|
|
.resume = rtl8211b_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc913),
|
|
.name = "RTL8211C Gigabit Ethernet",
|
|
.config_init = rtl8211c_config_init,
|
|
.read_mmd = &genphy_read_mmd_unsupported,
|
|
.write_mmd = &genphy_write_mmd_unsupported,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc914),
|
|
.name = "RTL8211DN Gigabit Ethernet",
|
|
.ack_interrupt = rtl821x_ack_interrupt,
|
|
.config_intr = rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc915),
|
|
.name = "RTL8211E Gigabit Ethernet",
|
|
.config_init = &rtl8211e_config_init,
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc916),
|
|
.name = "RTL8211F Gigabit Ethernet",
|
|
.config_init = &rtl8211f_config_init,
|
|
.ack_interrupt = &rtl8211f_ack_interrupt,
|
|
.config_intr = &rtl8211f_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
}, {
|
|
.name = "Generic FE-GE Realtek PHY",
|
|
.match_phy_device = rtlgen_match_phy_device,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
.read_mmd = rtlgen_read_mmd,
|
|
.write_mmd = rtlgen_write_mmd,
|
|
}, {
|
|
.name = "RTL8125 2.5Gbps internal",
|
|
.match_phy_device = rtl8125_match_phy_device,
|
|
.get_features = rtl8125_get_features,
|
|
.config_aneg = rtl8125_config_aneg,
|
|
.read_status = rtl8125_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_page = rtl821x_read_page,
|
|
.write_page = rtl821x_write_page,
|
|
.read_mmd = rtl8125_read_mmd,
|
|
.write_mmd = rtl8125_write_mmd,
|
|
}, {
|
|
PHY_ID_MATCH_EXACT(0x001cc961),
|
|
.name = "RTL8366RB Gigabit Ethernet",
|
|
.config_init = &rtl8366rb_config_init,
|
|
/* These interrupts are handled by the irq controller
|
|
* embedded inside the RTL8366RB, they get unmasked when the
|
|
* irq is requested and ACKed by reading the status register,
|
|
* which is done by the irqchip code.
|
|
*/
|
|
.ack_interrupt = genphy_no_ack_interrupt,
|
|
.config_intr = genphy_no_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(realtek_drvs);
|
|
|
|
static const struct mdio_device_id __maybe_unused realtek_tbl[] = {
|
|
{ PHY_ID_MATCH_VENDOR(0x001cc800) },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, realtek_tbl);
|