OpenCloudOS-Kernel/drivers/usb
Chunfeng Yun ad0c542cd2 usb: mtu3: re-enable controller to accept LPM request after LPM resume
After the controller receives a LPM request, it will reject the LPM
request, and need software to re-enable it after LPM resume if the
controller doesn't remote wakeup from L1 automatically

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24 18:09:36 +02:00
..
atm USB: atm: fix up some remaining DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
c67x00 USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
chipidea usb: chipidea: imx: Fix ULPI on imx53 2018-03-29 12:03:01 +02:00
class usb: usbtmc: Remove rigol_quirk 2018-05-18 15:56:40 +02:00
common usb: common: Small class for USB role switches 2018-03-22 13:40:10 +01:00
core Merge 4.17-rc4 into usb-next 2018-05-08 09:47:16 +02:00
dwc2 usb: dwc2: gadget: Fix coverity issue 2018-05-21 10:40:16 +03:00
dwc3 usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue 2018-05-21 10:36:14 +03:00
early usb: early: Correct the endpoint type value for bulk in endpoint 2017-12-07 16:03:15 +01:00
gadget usb: changes for v4.18 merge window 2018-05-24 17:46:53 +02:00
host xhci: debugfs: add debugfs interface to enable compliance mode for a port 2018-05-24 18:03:09 +02:00
image USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
isp1760 usb: isp1760: Replace mdelay with msleep in isp1760_stop 2018-04-22 15:49:42 +02:00
misc usb-misc: sisusbvga: fix spelling mistake: "asymmeric" -> "asymmetric" 2018-04-29 15:38:18 +02:00
mon usb: mon: Change return type to vm_fault_t 2018-04-22 15:36:31 +02:00
mtu3 usb: mtu3: re-enable controller to accept LPM request after LPM resume 2018-05-24 18:09:36 +02:00
musb usb: musb: gadget: fix to_musb_ep() to not return NULL 2018-05-22 12:03:25 +02:00
phy usb: phy: simplify getting .drvdata 2018-05-15 10:11:17 +03:00
renesas_usbhs USB: renesas_usbhs: drop unused legacy-phy support 2018-04-22 15:58:24 +02:00
roles usb: roles: Fix potential NULL dereference in intel_xhci_usb_probe() 2018-04-22 15:49:42 +02:00
serial USB: serial: visor: handle potential invalid device configuration 2018-05-02 09:37:19 +02:00
storage usb: storage: Replace mdelay with msleep in init_freecom 2018-04-22 15:49:42 +02:00
typec Merge 4.17-rc4 into usb-next 2018-05-08 09:47:16 +02:00
usbip usbip: usbip_host: fix bad unlock balance during stub_probe() 2018-05-16 18:52:13 +02:00
wusbcore USB: wusbcore: crypto: Remove VLA usage 2018-03-16 15:40:19 +01:00
Kconfig usb: select USB_COMMON for usb role switch config 2018-04-22 15:23:37 +02:00
Makefile usb: roles: Add Intel xHCI USB role switch driver 2018-03-22 13:49:27 +01:00
README
usb-skeleton.c usb: usb-skeleton: make MODULE_LICENSE and SPDX tag match 2018-03-06 09:42:07 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.