OpenCloudOS-Kernel/arch/powerpc/kernel/interrupt.c

505 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
#include <linux/context_tracking.h>
#include <linux/err.h>
#include <linux/compat.h>
#include <linux/sched/debug.h> /* for show_regs */
#include <asm/kup.h>
#include <asm/cputime.h>
#include <asm/hw_irq.h>
#include <asm/interrupt.h>
#include <asm/kprobes.h>
#include <asm/paca.h>
#include <asm/ptrace.h>
#include <asm/reg.h>
#include <asm/signal.h>
#include <asm/switch_to.h>
#include <asm/syscall.h>
#include <asm/time.h>
#include <asm/tm.h>
#include <asm/unistd.h>
#if defined(CONFIG_PPC_ADV_DEBUG_REGS) && defined(CONFIG_PPC32)
unsigned long global_dbcr0[NR_CPUS];
#endif
#ifdef CONFIG_PPC_BOOK3S_64
DEFINE_STATIC_KEY_FALSE(interrupt_exit_not_reentrant);
static inline bool exit_must_hard_disable(void)
{
return static_branch_unlikely(&interrupt_exit_not_reentrant);
}
#else
static inline bool exit_must_hard_disable(void)
{
return true;
}
#endif
/*
* local irqs must be disabled. Returns false if the caller must re-enable
* them, check for new work, and try again.
*
* This should be called with local irqs disabled, but if they were previously
* enabled when the interrupt handler returns (indicating a process-context /
* synchronous interrupt) then irqs_enabled should be true.
*
* restartable is true then EE/RI can be left on because interrupts are handled
* with a restart sequence.
*/
static notrace __always_inline bool prep_irq_for_enabled_exit(bool restartable)
{
bool must_hard_disable = (exit_must_hard_disable() || !restartable);
/* This must be done with RI=1 because tracing may touch vmaps */
trace_hardirqs_on();
if (must_hard_disable)
__hard_EE_RI_disable();
#ifdef CONFIG_PPC64
/* This pattern matches prep_irq_for_idle */
if (unlikely(lazy_irq_pending_nocheck())) {
if (must_hard_disable) {
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
__hard_RI_enable();
}
trace_hardirqs_off();
return false;
}
#endif
return true;
}
static notrace void booke_load_dbcr0(void)
{
#ifdef CONFIG_PPC_ADV_DEBUG_REGS
unsigned long dbcr0 = current->thread.debug.dbcr0;
if (likely(!(dbcr0 & DBCR0_IDM)))
return;
/*
* Check to see if the dbcr0 register is set up to debug.
* Use the internal debug mode bit to do this.
*/
mtmsr(mfmsr() & ~MSR_DE);
if (IS_ENABLED(CONFIG_PPC32)) {
isync();
global_dbcr0[smp_processor_id()] = mfspr(SPRN_DBCR0);
}
mtspr(SPRN_DBCR0, dbcr0);
mtspr(SPRN_DBSR, -1);
#endif
}
static notrace void check_return_regs_valid(struct pt_regs *regs)
{
#ifdef CONFIG_PPC_BOOK3S_64
unsigned long trap, srr0, srr1;
static bool warned;
u8 *validp;
char *h;
if (trap_is_scv(regs))
return;
trap = TRAP(regs);
// EE in HV mode sets HSRRs like 0xea0
if (cpu_has_feature(CPU_FTR_HVMODE) && trap == INTERRUPT_EXTERNAL)
trap = 0xea0;
switch (trap) {
case 0x980:
case INTERRUPT_H_DATA_STORAGE:
case 0xe20:
case 0xe40:
case INTERRUPT_HMI:
case 0xe80:
case 0xea0:
case INTERRUPT_H_FAC_UNAVAIL:
case 0x1200:
case 0x1500:
case 0x1600:
case 0x1800:
validp = &local_paca->hsrr_valid;
if (!READ_ONCE(*validp))
return;
srr0 = mfspr(SPRN_HSRR0);
srr1 = mfspr(SPRN_HSRR1);
h = "H";
break;
default:
validp = &local_paca->srr_valid;
if (!READ_ONCE(*validp))
return;
srr0 = mfspr(SPRN_SRR0);
srr1 = mfspr(SPRN_SRR1);
h = "";
break;
}
if (srr0 == regs->nip && srr1 == regs->msr)
return;
/*
* A NMI / soft-NMI interrupt may have come in after we found
* srr_valid and before the SRRs are loaded. The interrupt then
* comes in and clobbers SRRs and clears srr_valid. Then we load
* the SRRs here and test them above and find they don't match.
*
* Test validity again after that, to catch such false positives.
*
* This test in general will have some window for false negatives
* and may not catch and fix all such cases if an NMI comes in
* later and clobbers SRRs without clearing srr_valid, but hopefully
* such things will get caught most of the time, statistically
* enough to be able to get a warning out.
*/
if (!READ_ONCE(*validp))
return;
if (!data_race(warned)) {
data_race(warned = true);
printk("%sSRR0 was: %lx should be: %lx\n", h, srr0, regs->nip);
printk("%sSRR1 was: %lx should be: %lx\n", h, srr1, regs->msr);
show_regs(regs);
}
WRITE_ONCE(*validp, 0); /* fixup */
#endif
}
static notrace unsigned long
interrupt_exit_user_prepare_main(unsigned long ret, struct pt_regs *regs)
{
unsigned long ti_flags;
again:
ti_flags = read_thread_flags();
while (unlikely(ti_flags & (_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM))) {
local_irq_enable();
if (ti_flags & _TIF_NEED_RESCHED) {
schedule();
} else {
/*
* SIGPENDING must restore signal handler function
* argument GPRs, and some non-volatiles (e.g., r1).
* Restore all for now. This could be made lighter.
*/
if (ti_flags & _TIF_SIGPENDING)
ret |= _TIF_RESTOREALL;
do_notify_resume(regs, ti_flags);
}
local_irq_disable();
ti_flags = read_thread_flags();
}
if (IS_ENABLED(CONFIG_PPC_BOOK3S_64) && IS_ENABLED(CONFIG_PPC_FPU)) {
if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
unlikely((ti_flags & _TIF_RESTORE_TM))) {
restore_tm_state(regs);
} else {
unsigned long mathflags = MSR_FP;
if (cpu_has_feature(CPU_FTR_VSX))
mathflags |= MSR_VEC | MSR_VSX;
else if (cpu_has_feature(CPU_FTR_ALTIVEC))
mathflags |= MSR_VEC;
/*
* If userspace MSR has all available FP bits set,
* then they are live and no need to restore. If not,
* it means the regs were given up and restore_math
* may decide to restore them (to avoid taking an FP
* fault).
*/
if ((regs->msr & mathflags) != mathflags)
restore_math(regs);
}
}
check_return_regs_valid(regs);
user_enter_irqoff();
if (!prep_irq_for_enabled_exit(true)) {
user_exit_irqoff();
local_irq_enable();
local_irq_disable();
goto again;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
local_paca->tm_scratch = regs->msr;
#endif
booke_load_dbcr0();
account_cpu_user_exit();
/* Restore user access locks last */
kuap_user_restore(regs);
return ret;
}
/*
* This should be called after a syscall returns, with r3 the return value
* from the syscall. If this function returns non-zero, the system call
* exit assembly should additionally load all GPR registers and CTR and XER
* from the interrupt frame.
*
* The function graph tracer can not trace the return side of this function,
* because RI=0 and soft mask state is "unreconciled", so it is marked notrace.
*/
notrace unsigned long syscall_exit_prepare(unsigned long r3,
struct pt_regs *regs,
long scv)
{
unsigned long ti_flags;
unsigned long ret = 0;
bool is_not_scv = !IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !scv;
CT_WARN_ON(ct_state() == CONTEXT_USER);
kuap_assert_locked();
regs->result = r3;
/* Check whether the syscall is issued inside a restartable sequence */
rseq_syscall(regs);
ti_flags = read_thread_flags();
if (unlikely(r3 >= (unsigned long)-MAX_ERRNO) && is_not_scv) {
if (likely(!(ti_flags & (_TIF_NOERROR | _TIF_RESTOREALL)))) {
r3 = -r3;
regs->ccr |= 0x10000000; /* Set SO bit in CR */
}
}
if (unlikely(ti_flags & _TIF_PERSYSCALL_MASK)) {
if (ti_flags & _TIF_RESTOREALL)
ret = _TIF_RESTOREALL;
else
regs->gpr[3] = r3;
clear_bits(_TIF_PERSYSCALL_MASK, &current_thread_info()->flags);
} else {
regs->gpr[3] = r3;
}
if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) {
do_syscall_trace_leave(regs);
ret |= _TIF_RESTOREALL;
}
local_irq_disable();
ret = interrupt_exit_user_prepare_main(ret, regs);
#ifdef CONFIG_PPC64
regs->exit_result = ret;
#endif
return ret;
}
#ifdef CONFIG_PPC64
notrace unsigned long syscall_exit_restart(unsigned long r3, struct pt_regs *regs)
{
/*
* This is called when detecting a soft-pending interrupt as well as
* an alternate-return interrupt. So we can't just have the alternate
* return path clear SRR1[MSR] and set PACA_IRQ_HARD_DIS (unless
* the soft-pending case were to fix things up as well). RI might be
* disabled, in which case it gets re-enabled by __hard_irq_disable().
*/
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
#ifdef CONFIG_PPC_BOOK3S_64
set_kuap(AMR_KUAP_BLOCKED);
#endif
trace_hardirqs_off();
user_exit_irqoff();
account_cpu_user_entry();
BUG_ON(!user_mode(regs));
regs->exit_result = interrupt_exit_user_prepare_main(regs->exit_result, regs);
return regs->exit_result;
}
#endif
notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs)
{
unsigned long ret;
BUG_ON(regs_is_unrecoverable(regs));
BUG_ON(arch_irq_disabled_regs(regs));
CT_WARN_ON(ct_state() == CONTEXT_USER);
/*
* We don't need to restore AMR on the way back to userspace for KUAP.
* AMR can only have been unlocked if we interrupted the kernel.
*/
kuap_assert_locked();
local_irq_disable();
ret = interrupt_exit_user_prepare_main(0, regs);
#ifdef CONFIG_PPC64
regs->exit_result = ret;
#endif
return ret;
}
void preempt_schedule_irq(void);
notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
{
unsigned long ret = 0;
unsigned long kuap;
bool stack_store = read_thread_flags() & _TIF_EMULATE_STACK_STORE;
if (regs_is_unrecoverable(regs))
unrecoverable_exception(regs);
/*
* CT_WARN_ON comes here via program_check_exception, so avoid
* recursion.
*
* Skip the assertion on PMIs on 64e to work around a problem caused
* by NMI PMIs incorrectly taking this interrupt return path, it's
* possible for this to hit after interrupt exit to user switches
* context to user. See also the comment in the performance monitor
* handler in exceptions-64e.S
*/
if (!IS_ENABLED(CONFIG_PPC_BOOK3E_64) &&
TRAP(regs) != INTERRUPT_PROGRAM &&
TRAP(regs) != INTERRUPT_PERFMON)
CT_WARN_ON(ct_state() == CONTEXT_USER);
kuap = kuap_get_and_assert_locked();
local_irq_disable();
if (!arch_irq_disabled_regs(regs)) {
/* Returning to a kernel context with local irqs enabled. */
WARN_ON_ONCE(!(regs->msr & MSR_EE));
again:
if (IS_ENABLED(CONFIG_PREEMPT)) {
/* Return to preemptible kernel context */
if (unlikely(read_thread_flags() & _TIF_NEED_RESCHED)) {
if (preempt_count() == 0)
preempt_schedule_irq();
}
}
check_return_regs_valid(regs);
/*
* Stack store exit can't be restarted because the interrupt
* stack frame might have been clobbered.
*/
if (!prep_irq_for_enabled_exit(unlikely(stack_store))) {
/*
* Replay pending soft-masked interrupts now. Don't
* just local_irq_enabe(); local_irq_disable(); because
* if we are returning from an asynchronous interrupt
* here, another one might hit after irqs are enabled,
* and it would exit via this same path allowing
* another to fire, and so on unbounded.
*/
hard_irq_disable();
replay_soft_interrupts();
/* Took an interrupt, may have more exit work to do. */
goto again;
}
#ifdef CONFIG_PPC64
/*
* An interrupt may clear MSR[EE] and set this concurrently,
* but it will be marked pending and the exit will be retried.
* This leaves a racy window where MSR[EE]=0 and HARD_DIS is
* clear, until interrupt_exit_kernel_restart() calls
* hard_irq_disable(), which will set HARD_DIS again.
*/
local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
} else {
check_return_regs_valid(regs);
if (unlikely(stack_store))
__hard_EE_RI_disable();
#endif /* CONFIG_PPC64 */
}
if (unlikely(stack_store)) {
clear_bits(_TIF_EMULATE_STACK_STORE, &current_thread_info()->flags);
ret = 1;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
local_paca->tm_scratch = regs->msr;
#endif
/*
* 64s does not want to mfspr(SPRN_AMR) here, because this comes after
* mtmsr, which would cause Read-After-Write stalls. Hence, take the
* AMR value from the check above.
*/
kuap_kernel_restore(regs, kuap);
return ret;
}
#ifdef CONFIG_PPC64
notrace unsigned long interrupt_exit_user_restart(struct pt_regs *regs)
{
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
#ifdef CONFIG_PPC_BOOK3S_64
set_kuap(AMR_KUAP_BLOCKED);
#endif
trace_hardirqs_off();
user_exit_irqoff();
account_cpu_user_entry();
BUG_ON(!user_mode(regs));
regs->exit_result |= interrupt_exit_user_prepare(regs);
return regs->exit_result;
}
/*
* No real need to return a value here because the stack store case does not
* get restarted.
*/
notrace unsigned long interrupt_exit_kernel_restart(struct pt_regs *regs)
{
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
#ifdef CONFIG_PPC_BOOK3S_64
set_kuap(AMR_KUAP_BLOCKED);
#endif
if (regs->softe == IRQS_ENABLED)
trace_hardirqs_off();
BUG_ON(user_mode(regs));
return interrupt_exit_kernel_prepare(regs);
}
#endif