1760 lines
49 KiB
C
1760 lines
49 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* iio/adc/max1363.c
|
|
* Copyright (C) 2008-2010 Jonathan Cameron
|
|
*
|
|
* based on linux/drivers/i2c/chips/max123x
|
|
* Copyright (C) 2002-2004 Stefan Eletzhofer
|
|
*
|
|
* based on linux/drivers/acron/char/pcf8583.c
|
|
* Copyright (C) 2000 Russell King
|
|
*
|
|
* Driver for max1363 and similar chips.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/list.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define MAX1363_SETUP_BYTE(a) ((a) | 0x80)
|
|
|
|
/* There is a fair bit more defined here than currently
|
|
* used, but the intention is to support everything these
|
|
* chips do in the long run */
|
|
|
|
/* see data sheets */
|
|
/* max1363 and max1236, max1237, max1238, max1239 */
|
|
#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00
|
|
#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20
|
|
#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40
|
|
#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60
|
|
#define MAX1363_SETUP_POWER_UP_INT_REF 0x10
|
|
#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00
|
|
|
|
/* think about including max11600 etc - more settings */
|
|
#define MAX1363_SETUP_EXT_CLOCK 0x08
|
|
#define MAX1363_SETUP_INT_CLOCK 0x00
|
|
#define MAX1363_SETUP_UNIPOLAR 0x00
|
|
#define MAX1363_SETUP_BIPOLAR 0x04
|
|
#define MAX1363_SETUP_RESET 0x00
|
|
#define MAX1363_SETUP_NORESET 0x02
|
|
/* max1363 only - though don't care on others.
|
|
* For now monitor modes are not implemented as the relevant
|
|
* line is not connected on my test board.
|
|
* The definitions are here as I intend to add this soon.
|
|
*/
|
|
#define MAX1363_SETUP_MONITOR_SETUP 0x01
|
|
|
|
/* Specific to the max1363 */
|
|
#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
|
|
#define MAX1363_MON_INT_ENABLE 0x01
|
|
|
|
/* defined for readability reasons */
|
|
/* All chips */
|
|
#define MAX1363_CONFIG_BYTE(a) ((a))
|
|
|
|
#define MAX1363_CONFIG_SE 0x01
|
|
#define MAX1363_CONFIG_DE 0x00
|
|
#define MAX1363_CONFIG_SCAN_TO_CS 0x00
|
|
#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20
|
|
#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40
|
|
#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60
|
|
/* max123{6-9} only */
|
|
#define MAX1236_SCAN_MID_TO_CHANNEL 0x40
|
|
|
|
/* max1363 only - merely part of channel selects or don't care for others */
|
|
#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18
|
|
|
|
#define MAX1363_CHANNEL_SEL(a) ((a) << 1)
|
|
|
|
/* max1363 strictly 0x06 - but doesn't matter */
|
|
#define MAX1363_CHANNEL_SEL_MASK 0x1E
|
|
#define MAX1363_SCAN_MASK 0x60
|
|
#define MAX1363_SE_DE_MASK 0x01
|
|
|
|
#define MAX1363_MAX_CHANNELS 25
|
|
/**
|
|
* struct max1363_mode - scan mode information
|
|
* @conf: The corresponding value of the configuration register
|
|
* @modemask: Bit mask corresponding to channels enabled in this mode
|
|
*/
|
|
struct max1363_mode {
|
|
int8_t conf;
|
|
DECLARE_BITMAP(modemask, MAX1363_MAX_CHANNELS);
|
|
};
|
|
|
|
/* This must be maintained along side the max1363_mode_table in max1363_core */
|
|
enum max1363_modes {
|
|
/* Single read of a single channel */
|
|
_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
|
|
/* Differential single read */
|
|
d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
|
|
d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
|
|
/* Scan to channel and mid to channel where overlapping */
|
|
s0to1, s0to2, s2to3, s0to3, s0to4, s0to5, s0to6,
|
|
s6to7, s0to7, s6to8, s0to8, s6to9,
|
|
s0to9, s6to10, s0to10, s6to11, s0to11,
|
|
/* Differential scan to channel and mid to channel where overlapping */
|
|
d0m1to2m3, d0m1to4m5, d0m1to6m7, d6m7to8m9,
|
|
d0m1to8m9, d6m7to10m11, d0m1to10m11, d1m0to3m2,
|
|
d1m0to5m4, d1m0to7m6, d7m6to9m8, d1m0to9m8,
|
|
d7m6to11m10, d1m0to11m10,
|
|
};
|
|
|
|
/**
|
|
* struct max1363_chip_info - chip specifc information
|
|
* @info: iio core function callbacks structure
|
|
* @channels: channel specification
|
|
* @num_channels: number of channels
|
|
* @mode_list: array of available scan modes
|
|
* @default_mode: the scan mode in which the chip starts up
|
|
* @int_vref_mv: the internal reference voltage
|
|
* @num_modes: number of modes
|
|
* @bits: accuracy of the adc in bits
|
|
*/
|
|
struct max1363_chip_info {
|
|
const struct iio_info *info;
|
|
const struct iio_chan_spec *channels;
|
|
int num_channels;
|
|
const enum max1363_modes *mode_list;
|
|
enum max1363_modes default_mode;
|
|
u16 int_vref_mv;
|
|
u8 num_modes;
|
|
u8 bits;
|
|
};
|
|
|
|
/**
|
|
* struct max1363_state - driver instance specific data
|
|
* @client: i2c_client
|
|
* @setupbyte: cache of current device setup byte
|
|
* @configbyte: cache of current device config byte
|
|
* @chip_info: chip model specific constants, available modes, etc.
|
|
* @current_mode: the scan mode of this chip
|
|
* @requestedmask: a valid requested set of channels
|
|
* @reg: supply regulator
|
|
* @monitor_on: whether monitor mode is enabled
|
|
* @monitor_speed: parameter corresponding to device monitor speed setting
|
|
* @mask_high: bitmask for enabled high thresholds
|
|
* @mask_low: bitmask for enabled low thresholds
|
|
* @thresh_high: high threshold values
|
|
* @thresh_low: low threshold values
|
|
* @vref: Reference voltage regulator
|
|
* @vref_uv: Actual (external or internal) reference voltage
|
|
* @send: function used to send data to the chip
|
|
* @recv: function used to receive data from the chip
|
|
*/
|
|
struct max1363_state {
|
|
struct i2c_client *client;
|
|
u8 setupbyte;
|
|
u8 configbyte;
|
|
const struct max1363_chip_info *chip_info;
|
|
const struct max1363_mode *current_mode;
|
|
u32 requestedmask;
|
|
struct regulator *reg;
|
|
|
|
/* Using monitor modes and buffer at the same time is
|
|
currently not supported */
|
|
bool monitor_on;
|
|
unsigned int monitor_speed:3;
|
|
u8 mask_high;
|
|
u8 mask_low;
|
|
/* 4x unipolar first then the fours bipolar ones */
|
|
s16 thresh_high[8];
|
|
s16 thresh_low[8];
|
|
struct regulator *vref;
|
|
u32 vref_uv;
|
|
int (*send)(const struct i2c_client *client,
|
|
const char *buf, int count);
|
|
int (*recv)(const struct i2c_client *client,
|
|
char *buf, int count);
|
|
};
|
|
|
|
#define MAX1363_MODE_SINGLE(_num, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_num) \
|
|
| MAX1363_CONFIG_SCAN_SINGLE_1 \
|
|
| MAX1363_CONFIG_SE, \
|
|
.modemask[0] = _mask, \
|
|
}
|
|
|
|
#define MAX1363_MODE_SCAN_TO_CHANNEL(_num, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_num) \
|
|
| MAX1363_CONFIG_SCAN_TO_CS \
|
|
| MAX1363_CONFIG_SE, \
|
|
.modemask[0] = _mask, \
|
|
}
|
|
|
|
/* note not available for max1363 hence naming */
|
|
#define MAX1236_MODE_SCAN_MID_TO_CHANNEL(_mid, _num, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_num) \
|
|
| MAX1236_SCAN_MID_TO_CHANNEL \
|
|
| MAX1363_CONFIG_SE, \
|
|
.modemask[0] = _mask \
|
|
}
|
|
|
|
#define MAX1363_MODE_DIFF_SINGLE(_nump, _numm, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_nump) \
|
|
| MAX1363_CONFIG_SCAN_SINGLE_1 \
|
|
| MAX1363_CONFIG_DE, \
|
|
.modemask[0] = _mask \
|
|
}
|
|
|
|
/* Can't think how to automate naming so specify for now */
|
|
#define MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(_num, _numvals, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_num) \
|
|
| MAX1363_CONFIG_SCAN_TO_CS \
|
|
| MAX1363_CONFIG_DE, \
|
|
.modemask[0] = _mask \
|
|
}
|
|
|
|
/* note only available for max1363 hence naming */
|
|
#define MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(_num, _numvals, _mask) { \
|
|
.conf = MAX1363_CHANNEL_SEL(_num) \
|
|
| MAX1236_SCAN_MID_TO_CHANNEL \
|
|
| MAX1363_CONFIG_SE, \
|
|
.modemask[0] = _mask \
|
|
}
|
|
|
|
static const struct max1363_mode max1363_mode_table[] = {
|
|
/* All of the single channel options first */
|
|
MAX1363_MODE_SINGLE(0, 1 << 0),
|
|
MAX1363_MODE_SINGLE(1, 1 << 1),
|
|
MAX1363_MODE_SINGLE(2, 1 << 2),
|
|
MAX1363_MODE_SINGLE(3, 1 << 3),
|
|
MAX1363_MODE_SINGLE(4, 1 << 4),
|
|
MAX1363_MODE_SINGLE(5, 1 << 5),
|
|
MAX1363_MODE_SINGLE(6, 1 << 6),
|
|
MAX1363_MODE_SINGLE(7, 1 << 7),
|
|
MAX1363_MODE_SINGLE(8, 1 << 8),
|
|
MAX1363_MODE_SINGLE(9, 1 << 9),
|
|
MAX1363_MODE_SINGLE(10, 1 << 10),
|
|
MAX1363_MODE_SINGLE(11, 1 << 11),
|
|
|
|
MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
|
|
MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
|
|
MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
|
|
MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
|
|
MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
|
|
MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
|
|
MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
|
|
MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
|
|
MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
|
|
MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
|
|
MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
|
|
MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),
|
|
|
|
/* The multichannel scans next */
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(1, 0x003),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(2, 0x007),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(2, 3, 0x00C),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(3, 0x00F),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(4, 0x01F),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(5, 0x03F),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(6, 0x07F),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 7, 0x0C0),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(7, 0x0FF),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 8, 0x1C0),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(8, 0x1FF),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 9, 0x3C0),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(9, 0x3FF),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 10, 0x7C0),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(10, 0x7FF),
|
|
MAX1236_MODE_SCAN_MID_TO_CHANNEL(6, 11, 0xFC0),
|
|
MAX1363_MODE_SCAN_TO_CHANNEL(11, 0xFFF),
|
|
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(2, 2, 0x003000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(4, 3, 0x007000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(6, 4, 0x00F000),
|
|
MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(8, 2, 0x018000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(8, 5, 0x01F000),
|
|
MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(10, 3, 0x038000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(10, 6, 0x3F000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(3, 2, 0x0C0000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(5, 3, 0x1C0000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(7, 4, 0x3C0000),
|
|
MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(9, 2, 0x600000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(9, 5, 0x7C0000),
|
|
MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL(11, 3, 0xE00000),
|
|
MAX1363_MODE_DIFF_SCAN_TO_CHANNEL(11, 6, 0xFC0000),
|
|
};
|
|
|
|
static const struct max1363_mode
|
|
*max1363_match_mode(const unsigned long *mask,
|
|
const struct max1363_chip_info *ci)
|
|
{
|
|
int i;
|
|
if (mask)
|
|
for (i = 0; i < ci->num_modes; i++)
|
|
if (bitmap_subset(mask,
|
|
max1363_mode_table[ci->mode_list[i]].
|
|
modemask,
|
|
MAX1363_MAX_CHANNELS))
|
|
return &max1363_mode_table[ci->mode_list[i]];
|
|
return NULL;
|
|
}
|
|
|
|
static int max1363_smbus_send(const struct i2c_client *client, const char *buf,
|
|
int count)
|
|
{
|
|
int i, err;
|
|
|
|
for (i = err = 0; err == 0 && i < count; ++i)
|
|
err = i2c_smbus_write_byte(client, buf[i]);
|
|
|
|
return err ? err : count;
|
|
}
|
|
|
|
static int max1363_smbus_recv(const struct i2c_client *client, char *buf,
|
|
int count)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < count; ++i) {
|
|
ret = i2c_smbus_read_byte(client);
|
|
if (ret < 0)
|
|
return ret;
|
|
buf[i] = ret;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int max1363_write_basic_config(struct max1363_state *st)
|
|
{
|
|
u8 tx_buf[2] = { st->setupbyte, st->configbyte };
|
|
|
|
return st->send(st->client, tx_buf, 2);
|
|
}
|
|
|
|
static int max1363_set_scan_mode(struct max1363_state *st)
|
|
{
|
|
st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
|
|
| MAX1363_SCAN_MASK
|
|
| MAX1363_SE_DE_MASK);
|
|
st->configbyte |= st->current_mode->conf;
|
|
|
|
return max1363_write_basic_config(st);
|
|
}
|
|
|
|
static int max1363_read_single_chan(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
long m)
|
|
{
|
|
int ret = 0;
|
|
s32 data;
|
|
u8 rxbuf[2];
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
struct i2c_client *client = st->client;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
/*
|
|
* If monitor mode is enabled, the method for reading a single
|
|
* channel will have to be rather different and has not yet
|
|
* been implemented.
|
|
*
|
|
* Also, cannot read directly if buffered capture enabled.
|
|
*/
|
|
if (st->monitor_on || iio_buffer_enabled(indio_dev)) {
|
|
ret = -EBUSY;
|
|
goto error_ret;
|
|
}
|
|
|
|
/* Check to see if current scan mode is correct */
|
|
if (st->current_mode != &max1363_mode_table[chan->address]) {
|
|
/* Update scan mode if needed */
|
|
st->current_mode = &max1363_mode_table[chan->address];
|
|
ret = max1363_set_scan_mode(st);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
}
|
|
if (st->chip_info->bits != 8) {
|
|
/* Get reading */
|
|
data = st->recv(client, rxbuf, 2);
|
|
if (data < 0) {
|
|
ret = data;
|
|
goto error_ret;
|
|
}
|
|
data = (rxbuf[1] | rxbuf[0] << 8) &
|
|
((1 << st->chip_info->bits) - 1);
|
|
} else {
|
|
/* Get reading */
|
|
data = st->recv(client, rxbuf, 1);
|
|
if (data < 0) {
|
|
ret = data;
|
|
goto error_ret;
|
|
}
|
|
data = rxbuf[0];
|
|
}
|
|
*val = data;
|
|
error_ret:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int max1363_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = max1363_read_single_chan(indio_dev, chan, val, m);
|
|
if (ret < 0)
|
|
return ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = st->vref_uv / 1000;
|
|
*val2 = st->chip_info->bits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Applies to max1363 */
|
|
static const enum max1363_modes max1363_mode_list[] = {
|
|
_s0, _s1, _s2, _s3,
|
|
s0to1, s0to2, s0to3,
|
|
d0m1, d2m3, d1m0, d3m2,
|
|
d0m1to2m3, d1m0to3m2,
|
|
};
|
|
|
|
static const struct iio_event_spec max1363_events[] = {
|
|
{
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_RISING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
}, {
|
|
.type = IIO_EV_TYPE_THRESH,
|
|
.dir = IIO_EV_DIR_FALLING,
|
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
|
BIT(IIO_EV_INFO_ENABLE),
|
|
},
|
|
};
|
|
|
|
#define MAX1363_CHAN_U(num, addr, si, bits, ev_spec, num_ev_spec) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = num, \
|
|
.address = addr, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.datasheet_name = "AIN"#num, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = bits, \
|
|
.storagebits = (bits > 8) ? 16 : 8, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.scan_index = si, \
|
|
.event_spec = ev_spec, \
|
|
.num_event_specs = num_ev_spec, \
|
|
}
|
|
|
|
/* bipolar channel */
|
|
#define MAX1363_CHAN_B(num, num2, addr, si, bits, ev_spec, num_ev_spec) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.differential = 1, \
|
|
.indexed = 1, \
|
|
.channel = num, \
|
|
.channel2 = num2, \
|
|
.address = addr, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.datasheet_name = "AIN"#num"-AIN"#num2, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = bits, \
|
|
.storagebits = (bits > 8) ? 16 : 8, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.scan_index = si, \
|
|
.event_spec = ev_spec, \
|
|
.num_event_specs = num_ev_spec, \
|
|
}
|
|
|
|
#define MAX1363_4X_CHANS(bits, ev_spec, num_ev_spec) { \
|
|
MAX1363_CHAN_U(0, _s0, 0, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_U(1, _s1, 1, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_U(2, _s2, 2, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_U(3, _s3, 3, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_B(0, 1, d0m1, 4, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_B(2, 3, d2m3, 5, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_B(1, 0, d1m0, 6, bits, ev_spec, num_ev_spec), \
|
|
MAX1363_CHAN_B(3, 2, d3m2, 7, bits, ev_spec, num_ev_spec), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(8) \
|
|
}
|
|
|
|
static const struct iio_chan_spec max1036_channels[] =
|
|
MAX1363_4X_CHANS(8, NULL, 0);
|
|
static const struct iio_chan_spec max1136_channels[] =
|
|
MAX1363_4X_CHANS(10, NULL, 0);
|
|
static const struct iio_chan_spec max1236_channels[] =
|
|
MAX1363_4X_CHANS(12, NULL, 0);
|
|
static const struct iio_chan_spec max1361_channels[] =
|
|
MAX1363_4X_CHANS(10, max1363_events, ARRAY_SIZE(max1363_events));
|
|
static const struct iio_chan_spec max1363_channels[] =
|
|
MAX1363_4X_CHANS(12, max1363_events, ARRAY_SIZE(max1363_events));
|
|
|
|
/* Applies to max1236, max1237 */
|
|
static const enum max1363_modes max1236_mode_list[] = {
|
|
_s0, _s1, _s2, _s3,
|
|
s0to1, s0to2, s0to3,
|
|
d0m1, d2m3, d1m0, d3m2,
|
|
d0m1to2m3, d1m0to3m2,
|
|
s2to3,
|
|
};
|
|
|
|
/* Applies to max1238, max1239 */
|
|
static const enum max1363_modes max1238_mode_list[] = {
|
|
_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
|
|
s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
|
|
s0to7, s0to8, s0to9, s0to10, s0to11,
|
|
d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
|
|
d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
|
|
d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
|
|
d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
|
|
s6to7, s6to8, s6to9, s6to10, s6to11,
|
|
d6m7to8m9, d6m7to10m11, d7m6to9m8, d7m6to11m10,
|
|
};
|
|
|
|
#define MAX1363_12X_CHANS(bits) { \
|
|
MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(2, _s2, 2, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(3, _s3, 3, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(4, _s4, 4, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(8, _s8, 8, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(9, _s9, 9, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(10, _s10, 10, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(11, _s11, 11, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(0, 1, d0m1, 12, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(2, 3, d2m3, 13, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(4, 5, d4m5, 14, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(6, 7, d6m7, 15, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(8, 9, d8m9, 16, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(10, 11, d10m11, 17, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(1, 0, d1m0, 18, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(3, 2, d3m2, 19, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(5, 4, d5m4, 20, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(7, 6, d7m6, 21, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(9, 8, d9m8, 22, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(11, 10, d11m10, 23, bits, NULL, 0), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(24) \
|
|
}
|
|
static const struct iio_chan_spec max1038_channels[] = MAX1363_12X_CHANS(8);
|
|
static const struct iio_chan_spec max1138_channels[] = MAX1363_12X_CHANS(10);
|
|
static const struct iio_chan_spec max1238_channels[] = MAX1363_12X_CHANS(12);
|
|
|
|
static const enum max1363_modes max11607_mode_list[] = {
|
|
_s0, _s1, _s2, _s3,
|
|
s0to1, s0to2, s0to3,
|
|
s2to3,
|
|
d0m1, d2m3, d1m0, d3m2,
|
|
d0m1to2m3, d1m0to3m2,
|
|
};
|
|
|
|
static const enum max1363_modes max11608_mode_list[] = {
|
|
_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7,
|
|
s0to1, s0to2, s0to3, s0to4, s0to5, s0to6, s0to7,
|
|
s6to7,
|
|
d0m1, d2m3, d4m5, d6m7,
|
|
d1m0, d3m2, d5m4, d7m6,
|
|
d0m1to2m3, d0m1to4m5, d0m1to6m7,
|
|
d1m0to3m2, d1m0to5m4, d1m0to7m6,
|
|
};
|
|
|
|
#define MAX1363_8X_CHANS(bits) { \
|
|
MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(2, _s2, 2, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(3, _s3, 3, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(4, _s4, 4, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(0, 1, d0m1, 8, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(2, 3, d2m3, 9, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(4, 5, d4m5, 10, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(6, 7, d6m7, 11, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(1, 0, d1m0, 12, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(3, 2, d3m2, 13, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(5, 4, d5m4, 14, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(7, 6, d7m6, 15, bits, NULL, 0), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(16) \
|
|
}
|
|
static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8);
|
|
static const struct iio_chan_spec max11608_channels[] = MAX1363_8X_CHANS(10);
|
|
static const struct iio_chan_spec max11614_channels[] = MAX1363_8X_CHANS(12);
|
|
|
|
static const enum max1363_modes max11644_mode_list[] = {
|
|
_s0, _s1, s0to1, d0m1, d1m0,
|
|
};
|
|
|
|
#define MAX1363_2X_CHANS(bits) { \
|
|
MAX1363_CHAN_U(0, _s0, 0, bits, NULL, 0), \
|
|
MAX1363_CHAN_U(1, _s1, 1, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(0, 1, d0m1, 2, bits, NULL, 0), \
|
|
MAX1363_CHAN_B(1, 0, d1m0, 3, bits, NULL, 0), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(4) \
|
|
}
|
|
|
|
static const struct iio_chan_spec max11646_channels[] = MAX1363_2X_CHANS(10);
|
|
static const struct iio_chan_spec max11644_channels[] = MAX1363_2X_CHANS(12);
|
|
|
|
enum { max1361,
|
|
max1362,
|
|
max1363,
|
|
max1364,
|
|
max1036,
|
|
max1037,
|
|
max1038,
|
|
max1039,
|
|
max1136,
|
|
max1137,
|
|
max1138,
|
|
max1139,
|
|
max1236,
|
|
max1237,
|
|
max1238,
|
|
max1239,
|
|
max11600,
|
|
max11601,
|
|
max11602,
|
|
max11603,
|
|
max11604,
|
|
max11605,
|
|
max11606,
|
|
max11607,
|
|
max11608,
|
|
max11609,
|
|
max11610,
|
|
max11611,
|
|
max11612,
|
|
max11613,
|
|
max11614,
|
|
max11615,
|
|
max11616,
|
|
max11617,
|
|
max11644,
|
|
max11645,
|
|
max11646,
|
|
max11647
|
|
};
|
|
|
|
static const int max1363_monitor_speeds[] = { 133000, 665000, 33300, 16600,
|
|
8300, 4200, 2000, 1000 };
|
|
|
|
static ssize_t max1363_monitor_show_freq(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct max1363_state *st = iio_priv(dev_to_iio_dev(dev));
|
|
return sprintf(buf, "%d\n", max1363_monitor_speeds[st->monitor_speed]);
|
|
}
|
|
|
|
static ssize_t max1363_monitor_store_freq(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t len)
|
|
{
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
int i, ret;
|
|
unsigned long val;
|
|
bool found = false;
|
|
|
|
ret = kstrtoul(buf, 10, &val);
|
|
if (ret)
|
|
return -EINVAL;
|
|
for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)
|
|
if (val == max1363_monitor_speeds[i]) {
|
|
found = true;
|
|
break;
|
|
}
|
|
if (!found)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->monitor_speed = i;
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR,
|
|
max1363_monitor_show_freq,
|
|
max1363_monitor_store_freq);
|
|
|
|
static IIO_CONST_ATTR(sampling_frequency_available,
|
|
"133000 665000 33300 16600 8300 4200 2000 1000");
|
|
|
|
static int max1363_read_thresh(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, enum iio_event_info info, int *val,
|
|
int *val2)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
if (dir == IIO_EV_DIR_FALLING)
|
|
*val = st->thresh_low[chan->channel];
|
|
else
|
|
*val = st->thresh_high[chan->channel];
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int max1363_write_thresh(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, enum iio_event_info info, int val,
|
|
int val2)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
/* make it handle signed correctly as well */
|
|
switch (st->chip_info->bits) {
|
|
case 10:
|
|
if (val > 0x3FF)
|
|
return -EINVAL;
|
|
break;
|
|
case 12:
|
|
if (val > 0xFFF)
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
|
|
switch (dir) {
|
|
case IIO_EV_DIR_FALLING:
|
|
st->thresh_low[chan->channel] = val;
|
|
break;
|
|
case IIO_EV_DIR_RISING:
|
|
st->thresh_high[chan->channel] = val;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const u64 max1363_event_codes[] = {
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 0,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 1,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 2,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 3,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_FALLING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 0,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 1,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 2,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
|
|
IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, 3,
|
|
IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING),
|
|
};
|
|
|
|
static irqreturn_t max1363_event_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
s64 timestamp = iio_get_time_ns(indio_dev);
|
|
unsigned long mask, loc;
|
|
u8 rx;
|
|
u8 tx[2] = { st->setupbyte,
|
|
MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
|
|
|
|
st->recv(st->client, &rx, 1);
|
|
mask = rx;
|
|
for_each_set_bit(loc, &mask, 8)
|
|
iio_push_event(indio_dev, max1363_event_codes[loc], timestamp);
|
|
st->send(st->client, tx, 2);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int max1363_read_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
int val;
|
|
int number = chan->channel;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (dir == IIO_EV_DIR_FALLING)
|
|
val = (1 << number) & st->mask_low;
|
|
else
|
|
val = (1 << number) & st->mask_high;
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
|
|
{
|
|
u8 *tx_buf;
|
|
int ret, i = 3, j;
|
|
unsigned long numelements;
|
|
int len;
|
|
const long *modemask;
|
|
|
|
if (!enabled) {
|
|
/* transition to buffered capture is not currently supported */
|
|
st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
|
|
st->configbyte &= ~MAX1363_SCAN_MASK;
|
|
st->monitor_on = false;
|
|
return max1363_write_basic_config(st);
|
|
}
|
|
|
|
/* Ensure we are in the relevant mode */
|
|
st->setupbyte |= MAX1363_SETUP_MONITOR_SETUP;
|
|
st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
|
|
| MAX1363_SCAN_MASK
|
|
| MAX1363_SE_DE_MASK);
|
|
st->configbyte |= MAX1363_CONFIG_SCAN_MONITOR_MODE;
|
|
if ((st->mask_low | st->mask_high) & 0x0F) {
|
|
st->configbyte |= max1363_mode_table[s0to3].conf;
|
|
modemask = max1363_mode_table[s0to3].modemask;
|
|
} else if ((st->mask_low | st->mask_high) & 0x30) {
|
|
st->configbyte |= max1363_mode_table[d0m1to2m3].conf;
|
|
modemask = max1363_mode_table[d0m1to2m3].modemask;
|
|
} else {
|
|
st->configbyte |= max1363_mode_table[d1m0to3m2].conf;
|
|
modemask = max1363_mode_table[d1m0to3m2].modemask;
|
|
}
|
|
numelements = bitmap_weight(modemask, MAX1363_MAX_CHANNELS);
|
|
len = 3 * numelements + 3;
|
|
tx_buf = kmalloc(len, GFP_KERNEL);
|
|
if (!tx_buf) {
|
|
ret = -ENOMEM;
|
|
goto error_ret;
|
|
}
|
|
tx_buf[0] = st->configbyte;
|
|
tx_buf[1] = st->setupbyte;
|
|
tx_buf[2] = (st->monitor_speed << 1);
|
|
|
|
/*
|
|
* So we need to do yet another bit of nefarious scan mode
|
|
* setup to match what we need.
|
|
*/
|
|
for (j = 0; j < 8; j++)
|
|
if (test_bit(j, modemask)) {
|
|
/* Establish the mode is in the scan */
|
|
if (st->mask_low & (1 << j)) {
|
|
tx_buf[i] = (st->thresh_low[j] >> 4) & 0xFF;
|
|
tx_buf[i + 1] = (st->thresh_low[j] << 4) & 0xF0;
|
|
} else if (j < 4) {
|
|
tx_buf[i] = 0;
|
|
tx_buf[i + 1] = 0;
|
|
} else {
|
|
tx_buf[i] = 0x80;
|
|
tx_buf[i + 1] = 0;
|
|
}
|
|
if (st->mask_high & (1 << j)) {
|
|
tx_buf[i + 1] |=
|
|
(st->thresh_high[j] >> 8) & 0x0F;
|
|
tx_buf[i + 2] = st->thresh_high[j] & 0xFF;
|
|
} else if (j < 4) {
|
|
tx_buf[i + 1] |= 0x0F;
|
|
tx_buf[i + 2] = 0xFF;
|
|
} else {
|
|
tx_buf[i + 1] |= 0x07;
|
|
tx_buf[i + 2] = 0xFF;
|
|
}
|
|
i += 3;
|
|
}
|
|
|
|
|
|
ret = st->send(st->client, tx_buf, len);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
if (ret != len) {
|
|
ret = -EIO;
|
|
goto error_ret;
|
|
}
|
|
|
|
/*
|
|
* Now that we hopefully have sensible thresholds in place it is
|
|
* time to turn the interrupts on.
|
|
* It is unclear from the data sheet if this should be necessary
|
|
* (i.e. whether monitor mode setup is atomic) but it appears to
|
|
* be in practice.
|
|
*/
|
|
tx_buf[0] = st->setupbyte;
|
|
tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
|
|
ret = st->send(st->client, tx_buf, 2);
|
|
if (ret < 0)
|
|
goto error_ret;
|
|
if (ret != 2) {
|
|
ret = -EIO;
|
|
goto error_ret;
|
|
}
|
|
ret = 0;
|
|
st->monitor_on = true;
|
|
error_ret:
|
|
|
|
kfree(tx_buf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* To keep this manageable we always use one of 3 scan modes.
|
|
* Scan 0...3, 0-1,2-3 and 1-0,3-2
|
|
*/
|
|
|
|
static inline int __max1363_check_event_mask(int thismask, int checkmask)
|
|
{
|
|
int ret = 0;
|
|
/* Is it unipolar */
|
|
if (thismask < 4) {
|
|
if (checkmask & ~0x0F) {
|
|
ret = -EBUSY;
|
|
goto error_ret;
|
|
}
|
|
} else if (thismask < 6) {
|
|
if (checkmask & ~0x30) {
|
|
ret = -EBUSY;
|
|
goto error_ret;
|
|
}
|
|
} else if (checkmask & ~0xC0)
|
|
ret = -EBUSY;
|
|
error_ret:
|
|
return ret;
|
|
}
|
|
|
|
static int max1363_write_event_config(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
|
enum iio_event_direction dir, int state)
|
|
{
|
|
int ret = 0;
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
u16 unifiedmask;
|
|
int number = chan->channel;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
unifiedmask = st->mask_low | st->mask_high;
|
|
if (dir == IIO_EV_DIR_FALLING) {
|
|
|
|
if (state == 0)
|
|
st->mask_low &= ~(1 << number);
|
|
else {
|
|
ret = __max1363_check_event_mask((1 << number),
|
|
unifiedmask);
|
|
if (ret)
|
|
goto error_ret;
|
|
st->mask_low |= (1 << number);
|
|
}
|
|
} else {
|
|
if (state == 0)
|
|
st->mask_high &= ~(1 << number);
|
|
else {
|
|
ret = __max1363_check_event_mask((1 << number),
|
|
unifiedmask);
|
|
if (ret)
|
|
goto error_ret;
|
|
st->mask_high |= (1 << number);
|
|
}
|
|
}
|
|
|
|
max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
|
|
error_ret:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* As with scan_elements, only certain sets of these can
|
|
* be combined.
|
|
*/
|
|
static struct attribute *max1363_event_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency.dev_attr.attr,
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group max1363_event_attribute_group = {
|
|
.attrs = max1363_event_attributes,
|
|
};
|
|
|
|
static int max1363_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *scan_mask)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
|
|
/*
|
|
* Need to figure out the current mode based upon the requested
|
|
* scan mask in iio_dev
|
|
*/
|
|
st->current_mode = max1363_match_mode(scan_mask, st->chip_info);
|
|
if (!st->current_mode)
|
|
return -EINVAL;
|
|
max1363_set_scan_mode(st);
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info max1238_info = {
|
|
.read_raw = &max1363_read_raw,
|
|
.update_scan_mode = &max1363_update_scan_mode,
|
|
};
|
|
|
|
static const struct iio_info max1363_info = {
|
|
.read_event_value = &max1363_read_thresh,
|
|
.write_event_value = &max1363_write_thresh,
|
|
.read_event_config = &max1363_read_event_config,
|
|
.write_event_config = &max1363_write_event_config,
|
|
.read_raw = &max1363_read_raw,
|
|
.update_scan_mode = &max1363_update_scan_mode,
|
|
.event_attrs = &max1363_event_attribute_group,
|
|
};
|
|
|
|
/* max1363 and max1368 tested - rest from data sheet */
|
|
static const struct max1363_chip_info max1363_chip_info_tbl[] = {
|
|
[max1361] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1363_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1363_mode_list),
|
|
.default_mode = s0to3,
|
|
.channels = max1361_channels,
|
|
.num_channels = ARRAY_SIZE(max1361_channels),
|
|
.info = &max1363_info,
|
|
},
|
|
[max1362] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1363_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1363_mode_list),
|
|
.default_mode = s0to3,
|
|
.channels = max1361_channels,
|
|
.num_channels = ARRAY_SIZE(max1361_channels),
|
|
.info = &max1363_info,
|
|
},
|
|
[max1363] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1363_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1363_mode_list),
|
|
.default_mode = s0to3,
|
|
.channels = max1363_channels,
|
|
.num_channels = ARRAY_SIZE(max1363_channels),
|
|
.info = &max1363_info,
|
|
},
|
|
[max1364] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1363_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1363_mode_list),
|
|
.default_mode = s0to3,
|
|
.channels = max1363_channels,
|
|
.num_channels = ARRAY_SIZE(max1363_channels),
|
|
.info = &max1363_info,
|
|
},
|
|
[max1036] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1036_channels,
|
|
.num_channels = ARRAY_SIZE(max1036_channels),
|
|
},
|
|
[max1037] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1036_channels,
|
|
.num_channels = ARRAY_SIZE(max1036_channels),
|
|
},
|
|
[max1038] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1038_channels,
|
|
.num_channels = ARRAY_SIZE(max1038_channels),
|
|
},
|
|
[max1039] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1038_channels,
|
|
.num_channels = ARRAY_SIZE(max1038_channels),
|
|
},
|
|
[max1136] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1136_channels,
|
|
.num_channels = ARRAY_SIZE(max1136_channels),
|
|
},
|
|
[max1137] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1136_channels,
|
|
.num_channels = ARRAY_SIZE(max1136_channels),
|
|
},
|
|
[max1138] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1138_channels,
|
|
.num_channels = ARRAY_SIZE(max1138_channels),
|
|
},
|
|
[max1139] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1138_channels,
|
|
.num_channels = ARRAY_SIZE(max1138_channels),
|
|
},
|
|
[max1236] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1236_channels,
|
|
.num_channels = ARRAY_SIZE(max1236_channels),
|
|
},
|
|
[max1237] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1236_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1236_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1236_channels,
|
|
.num_channels = ARRAY_SIZE(max1236_channels),
|
|
},
|
|
[max1238] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1238_channels,
|
|
.num_channels = ARRAY_SIZE(max1238_channels),
|
|
},
|
|
[max1239] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1238_channels,
|
|
.num_channels = ARRAY_SIZE(max1238_channels),
|
|
},
|
|
[max11600] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1036_channels,
|
|
.num_channels = ARRAY_SIZE(max1036_channels),
|
|
},
|
|
[max11601] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1036_channels,
|
|
.num_channels = ARRAY_SIZE(max1036_channels),
|
|
},
|
|
[max11602] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11602_channels,
|
|
.num_channels = ARRAY_SIZE(max11602_channels),
|
|
},
|
|
[max11603] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11602_channels,
|
|
.num_channels = ARRAY_SIZE(max11602_channels),
|
|
},
|
|
[max11604] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1038_channels,
|
|
.num_channels = ARRAY_SIZE(max1038_channels),
|
|
},
|
|
[max11605] = {
|
|
.bits = 8,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1038_channels,
|
|
.num_channels = ARRAY_SIZE(max1038_channels),
|
|
},
|
|
[max11606] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1136_channels,
|
|
.num_channels = ARRAY_SIZE(max1136_channels),
|
|
},
|
|
[max11607] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1136_channels,
|
|
.num_channels = ARRAY_SIZE(max1136_channels),
|
|
},
|
|
[max11608] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11608_channels,
|
|
.num_channels = ARRAY_SIZE(max11608_channels),
|
|
},
|
|
[max11609] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11608_channels,
|
|
.num_channels = ARRAY_SIZE(max11608_channels),
|
|
},
|
|
[max11610] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1138_channels,
|
|
.num_channels = ARRAY_SIZE(max1138_channels),
|
|
},
|
|
[max11611] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1138_channels,
|
|
.num_channels = ARRAY_SIZE(max1138_channels),
|
|
},
|
|
[max11612] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1363_channels,
|
|
.num_channels = ARRAY_SIZE(max1363_channels),
|
|
},
|
|
[max11613] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11607_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11607_mode_list),
|
|
.default_mode = s0to3,
|
|
.info = &max1238_info,
|
|
.channels = max1363_channels,
|
|
.num_channels = ARRAY_SIZE(max1363_channels),
|
|
},
|
|
[max11614] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11614_channels,
|
|
.num_channels = ARRAY_SIZE(max11614_channels),
|
|
},
|
|
[max11615] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11608_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11608_mode_list),
|
|
.default_mode = s0to7,
|
|
.info = &max1238_info,
|
|
.channels = max11614_channels,
|
|
.num_channels = ARRAY_SIZE(max11614_channels),
|
|
},
|
|
[max11616] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1238_channels,
|
|
.num_channels = ARRAY_SIZE(max1238_channels),
|
|
},
|
|
[max11617] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max1238_mode_list,
|
|
.num_modes = ARRAY_SIZE(max1238_mode_list),
|
|
.default_mode = s0to11,
|
|
.info = &max1238_info,
|
|
.channels = max1238_channels,
|
|
.num_channels = ARRAY_SIZE(max1238_channels),
|
|
},
|
|
[max11644] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11644_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11644_mode_list),
|
|
.default_mode = s0to1,
|
|
.info = &max1238_info,
|
|
.channels = max11644_channels,
|
|
.num_channels = ARRAY_SIZE(max11644_channels),
|
|
},
|
|
[max11645] = {
|
|
.bits = 12,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11644_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11644_mode_list),
|
|
.default_mode = s0to1,
|
|
.info = &max1238_info,
|
|
.channels = max11644_channels,
|
|
.num_channels = ARRAY_SIZE(max11644_channels),
|
|
},
|
|
[max11646] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 4096,
|
|
.mode_list = max11644_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11644_mode_list),
|
|
.default_mode = s0to1,
|
|
.info = &max1238_info,
|
|
.channels = max11646_channels,
|
|
.num_channels = ARRAY_SIZE(max11646_channels),
|
|
},
|
|
[max11647] = {
|
|
.bits = 10,
|
|
.int_vref_mv = 2048,
|
|
.mode_list = max11644_mode_list,
|
|
.num_modes = ARRAY_SIZE(max11644_mode_list),
|
|
.default_mode = s0to1,
|
|
.info = &max1238_info,
|
|
.channels = max11646_channels,
|
|
.num_channels = ARRAY_SIZE(max11646_channels),
|
|
},
|
|
};
|
|
|
|
static int max1363_initial_setup(struct max1363_state *st)
|
|
{
|
|
st->setupbyte = MAX1363_SETUP_INT_CLOCK
|
|
| MAX1363_SETUP_UNIPOLAR
|
|
| MAX1363_SETUP_NORESET;
|
|
|
|
if (st->vref)
|
|
st->setupbyte |= MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF;
|
|
else
|
|
st->setupbyte |= MAX1363_SETUP_POWER_UP_INT_REF
|
|
| MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT;
|
|
|
|
/* Set scan mode writes the config anyway so wait until then */
|
|
st->setupbyte = MAX1363_SETUP_BYTE(st->setupbyte);
|
|
st->current_mode = &max1363_mode_table[st->chip_info->default_mode];
|
|
st->configbyte = MAX1363_CONFIG_BYTE(st->configbyte);
|
|
|
|
return max1363_set_scan_mode(st);
|
|
}
|
|
|
|
static int max1363_alloc_scan_masks(struct iio_dev *indio_dev)
|
|
{
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
unsigned long *masks;
|
|
int i;
|
|
|
|
masks = devm_kzalloc(&indio_dev->dev,
|
|
array3_size(BITS_TO_LONGS(MAX1363_MAX_CHANNELS),
|
|
sizeof(long),
|
|
st->chip_info->num_modes + 1),
|
|
GFP_KERNEL);
|
|
if (!masks)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < st->chip_info->num_modes; i++)
|
|
bitmap_copy(masks + BITS_TO_LONGS(MAX1363_MAX_CHANNELS)*i,
|
|
max1363_mode_table[st->chip_info->mode_list[i]]
|
|
.modemask, MAX1363_MAX_CHANNELS);
|
|
|
|
indio_dev->available_scan_masks = masks;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t max1363_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
__u8 *rxbuf;
|
|
int b_sent;
|
|
size_t d_size;
|
|
unsigned long numvals = bitmap_weight(st->current_mode->modemask,
|
|
MAX1363_MAX_CHANNELS);
|
|
|
|
/* Ensure the timestamp is 8 byte aligned */
|
|
if (st->chip_info->bits != 8)
|
|
d_size = numvals*2;
|
|
else
|
|
d_size = numvals;
|
|
if (indio_dev->scan_timestamp) {
|
|
d_size += sizeof(s64);
|
|
if (d_size % sizeof(s64))
|
|
d_size += sizeof(s64) - (d_size % sizeof(s64));
|
|
}
|
|
/* Monitor mode prevents reading. Whilst not currently implemented
|
|
* might as well have this test in here in the meantime as it does
|
|
* no harm.
|
|
*/
|
|
if (numvals == 0)
|
|
goto done;
|
|
|
|
rxbuf = kmalloc(d_size, GFP_KERNEL);
|
|
if (rxbuf == NULL)
|
|
goto done;
|
|
if (st->chip_info->bits != 8)
|
|
b_sent = st->recv(st->client, rxbuf, numvals * 2);
|
|
else
|
|
b_sent = st->recv(st->client, rxbuf, numvals);
|
|
if (b_sent < 0)
|
|
goto done_free;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, rxbuf,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done_free:
|
|
kfree(rxbuf);
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
|
|
#define MAX1363_COMPATIBLE(of_compatible, cfg) { \
|
|
.compatible = of_compatible, \
|
|
.data = &max1363_chip_info_tbl[cfg], \
|
|
}
|
|
|
|
static const struct of_device_id max1363_of_match[] = {
|
|
MAX1363_COMPATIBLE("maxim,max1361", max1361),
|
|
MAX1363_COMPATIBLE("maxim,max1362", max1362),
|
|
MAX1363_COMPATIBLE("maxim,max1363", max1363),
|
|
MAX1363_COMPATIBLE("maxim,max1364", max1364),
|
|
MAX1363_COMPATIBLE("maxim,max1036", max1036),
|
|
MAX1363_COMPATIBLE("maxim,max1037", max1037),
|
|
MAX1363_COMPATIBLE("maxim,max1038", max1038),
|
|
MAX1363_COMPATIBLE("maxim,max1039", max1039),
|
|
MAX1363_COMPATIBLE("maxim,max1136", max1136),
|
|
MAX1363_COMPATIBLE("maxim,max1137", max1137),
|
|
MAX1363_COMPATIBLE("maxim,max1138", max1138),
|
|
MAX1363_COMPATIBLE("maxim,max1139", max1139),
|
|
MAX1363_COMPATIBLE("maxim,max1236", max1236),
|
|
MAX1363_COMPATIBLE("maxim,max1237", max1237),
|
|
MAX1363_COMPATIBLE("maxim,max1238", max1238),
|
|
MAX1363_COMPATIBLE("maxim,max1239", max1239),
|
|
MAX1363_COMPATIBLE("maxim,max11600", max11600),
|
|
MAX1363_COMPATIBLE("maxim,max11601", max11601),
|
|
MAX1363_COMPATIBLE("maxim,max11602", max11602),
|
|
MAX1363_COMPATIBLE("maxim,max11603", max11603),
|
|
MAX1363_COMPATIBLE("maxim,max11604", max11604),
|
|
MAX1363_COMPATIBLE("maxim,max11605", max11605),
|
|
MAX1363_COMPATIBLE("maxim,max11606", max11606),
|
|
MAX1363_COMPATIBLE("maxim,max11607", max11607),
|
|
MAX1363_COMPATIBLE("maxim,max11608", max11608),
|
|
MAX1363_COMPATIBLE("maxim,max11609", max11609),
|
|
MAX1363_COMPATIBLE("maxim,max11610", max11610),
|
|
MAX1363_COMPATIBLE("maxim,max11611", max11611),
|
|
MAX1363_COMPATIBLE("maxim,max11612", max11612),
|
|
MAX1363_COMPATIBLE("maxim,max11613", max11613),
|
|
MAX1363_COMPATIBLE("maxim,max11614", max11614),
|
|
MAX1363_COMPATIBLE("maxim,max11615", max11615),
|
|
MAX1363_COMPATIBLE("maxim,max11616", max11616),
|
|
MAX1363_COMPATIBLE("maxim,max11617", max11617),
|
|
MAX1363_COMPATIBLE("maxim,max11644", max11644),
|
|
MAX1363_COMPATIBLE("maxim,max11645", max11645),
|
|
MAX1363_COMPATIBLE("maxim,max11646", max11646),
|
|
MAX1363_COMPATIBLE("maxim,max11647", max11647),
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max1363_of_match);
|
|
#endif
|
|
|
|
static int max1363_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct max1363_state *st;
|
|
struct iio_dev *indio_dev;
|
|
struct regulator *vref;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev,
|
|
sizeof(struct max1363_state));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
indio_dev->dev.of_node = client->dev.of_node;
|
|
ret = iio_map_array_register(indio_dev, client->dev.platform_data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = devm_regulator_get(&client->dev, "vcc");
|
|
if (IS_ERR(st->reg)) {
|
|
ret = PTR_ERR(st->reg);
|
|
goto error_unregister_map;
|
|
}
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_unregister_map;
|
|
|
|
/* this is only used for device removal purposes */
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
st->chip_info = of_device_get_match_data(&client->dev);
|
|
if (!st->chip_info)
|
|
st->chip_info = &max1363_chip_info_tbl[id->driver_data];
|
|
st->client = client;
|
|
|
|
st->vref_uv = st->chip_info->int_vref_mv * 1000;
|
|
vref = devm_regulator_get_optional(&client->dev, "vref");
|
|
if (!IS_ERR(vref)) {
|
|
int vref_uv;
|
|
|
|
ret = regulator_enable(vref);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
st->vref = vref;
|
|
vref_uv = regulator_get_voltage(vref);
|
|
if (vref_uv <= 0) {
|
|
ret = -EINVAL;
|
|
goto error_disable_reg;
|
|
}
|
|
st->vref_uv = vref_uv;
|
|
}
|
|
|
|
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
st->send = i2c_master_send;
|
|
st->recv = i2c_master_recv;
|
|
} else if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)
|
|
&& st->chip_info->bits == 8) {
|
|
st->send = max1363_smbus_send;
|
|
st->recv = max1363_smbus_recv;
|
|
} else {
|
|
ret = -EOPNOTSUPP;
|
|
goto error_disable_reg;
|
|
}
|
|
|
|
ret = max1363_alloc_scan_masks(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
/* Establish that the iio_dev is a child of the i2c device */
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->dev.of_node = client->dev.of_node;
|
|
indio_dev->name = id->name;
|
|
indio_dev->channels = st->chip_info->channels;
|
|
indio_dev->num_channels = st->chip_info->num_channels;
|
|
indio_dev->info = st->chip_info->info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
ret = max1363_initial_setup(st);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
&max1363_trigger_handler, NULL);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
if (client->irq) {
|
|
ret = devm_request_threaded_irq(&client->dev, st->client->irq,
|
|
NULL,
|
|
&max1363_event_handler,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
"max1363_event",
|
|
indio_dev);
|
|
|
|
if (ret)
|
|
goto error_uninit_buffer;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto error_uninit_buffer;
|
|
|
|
return 0;
|
|
|
|
error_uninit_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_disable_reg:
|
|
if (st->vref)
|
|
regulator_disable(st->vref);
|
|
regulator_disable(st->reg);
|
|
error_unregister_map:
|
|
iio_map_array_unregister(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int max1363_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct max1363_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
if (st->vref)
|
|
regulator_disable(st->vref);
|
|
regulator_disable(st->reg);
|
|
iio_map_array_unregister(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id max1363_id[] = {
|
|
{ "max1361", max1361 },
|
|
{ "max1362", max1362 },
|
|
{ "max1363", max1363 },
|
|
{ "max1364", max1364 },
|
|
{ "max1036", max1036 },
|
|
{ "max1037", max1037 },
|
|
{ "max1038", max1038 },
|
|
{ "max1039", max1039 },
|
|
{ "max1136", max1136 },
|
|
{ "max1137", max1137 },
|
|
{ "max1138", max1138 },
|
|
{ "max1139", max1139 },
|
|
{ "max1236", max1236 },
|
|
{ "max1237", max1237 },
|
|
{ "max1238", max1238 },
|
|
{ "max1239", max1239 },
|
|
{ "max11600", max11600 },
|
|
{ "max11601", max11601 },
|
|
{ "max11602", max11602 },
|
|
{ "max11603", max11603 },
|
|
{ "max11604", max11604 },
|
|
{ "max11605", max11605 },
|
|
{ "max11606", max11606 },
|
|
{ "max11607", max11607 },
|
|
{ "max11608", max11608 },
|
|
{ "max11609", max11609 },
|
|
{ "max11610", max11610 },
|
|
{ "max11611", max11611 },
|
|
{ "max11612", max11612 },
|
|
{ "max11613", max11613 },
|
|
{ "max11614", max11614 },
|
|
{ "max11615", max11615 },
|
|
{ "max11616", max11616 },
|
|
{ "max11617", max11617 },
|
|
{ "max11644", max11644 },
|
|
{ "max11645", max11645 },
|
|
{ "max11646", max11646 },
|
|
{ "max11647", max11647 },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, max1363_id);
|
|
|
|
static struct i2c_driver max1363_driver = {
|
|
.driver = {
|
|
.name = "max1363",
|
|
.of_match_table = of_match_ptr(max1363_of_match),
|
|
},
|
|
.probe = max1363_probe,
|
|
.remove = max1363_remove,
|
|
.id_table = max1363_id,
|
|
};
|
|
module_i2c_driver(max1363_driver);
|
|
|
|
MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
|
|
MODULE_DESCRIPTION("Maxim 1363 ADC");
|
|
MODULE_LICENSE("GPL v2");
|