421 lines
10 KiB
C
421 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
|
|
*
|
|
* This is the driver for the imx25 GCQ (Generic Conversion Queue)
|
|
* connected to the imx25 ADC.
|
|
*/
|
|
|
|
#include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/imx25-tsadc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define MX25_GCQ_TIMEOUT (msecs_to_jiffies(2000))
|
|
|
|
static const char * const driver_name = "mx25-gcq";
|
|
|
|
enum mx25_gcq_cfgs {
|
|
MX25_CFG_XP = 0,
|
|
MX25_CFG_YP,
|
|
MX25_CFG_XN,
|
|
MX25_CFG_YN,
|
|
MX25_CFG_WIPER,
|
|
MX25_CFG_INAUX0,
|
|
MX25_CFG_INAUX1,
|
|
MX25_CFG_INAUX2,
|
|
MX25_NUM_CFGS,
|
|
};
|
|
|
|
struct mx25_gcq_priv {
|
|
struct regmap *regs;
|
|
struct completion completed;
|
|
struct clk *clk;
|
|
int irq;
|
|
struct regulator *vref[4];
|
|
u32 channel_vref_mv[MX25_NUM_CFGS];
|
|
};
|
|
|
|
#define MX25_CQG_CHAN(chan, id) {\
|
|
.type = IIO_VOLTAGE,\
|
|
.indexed = 1,\
|
|
.channel = chan,\
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE),\
|
|
.datasheet_name = id,\
|
|
}
|
|
|
|
static const struct iio_chan_spec mx25_gcq_channels[MX25_NUM_CFGS] = {
|
|
MX25_CQG_CHAN(MX25_CFG_XP, "xp"),
|
|
MX25_CQG_CHAN(MX25_CFG_YP, "yp"),
|
|
MX25_CQG_CHAN(MX25_CFG_XN, "xn"),
|
|
MX25_CQG_CHAN(MX25_CFG_YN, "yn"),
|
|
MX25_CQG_CHAN(MX25_CFG_WIPER, "wiper"),
|
|
MX25_CQG_CHAN(MX25_CFG_INAUX0, "inaux0"),
|
|
MX25_CQG_CHAN(MX25_CFG_INAUX1, "inaux1"),
|
|
MX25_CQG_CHAN(MX25_CFG_INAUX2, "inaux2"),
|
|
};
|
|
|
|
static const char * const mx25_gcq_refp_names[] = {
|
|
[MX25_ADC_REFP_YP] = "yp",
|
|
[MX25_ADC_REFP_XP] = "xp",
|
|
[MX25_ADC_REFP_INT] = "int",
|
|
[MX25_ADC_REFP_EXT] = "ext",
|
|
};
|
|
|
|
static irqreturn_t mx25_gcq_irq(int irq, void *data)
|
|
{
|
|
struct mx25_gcq_priv *priv = data;
|
|
u32 stats;
|
|
|
|
regmap_read(priv->regs, MX25_ADCQ_SR, &stats);
|
|
|
|
if (stats & MX25_ADCQ_SR_EOQ) {
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_MR,
|
|
MX25_ADCQ_MR_EOQ_IRQ, MX25_ADCQ_MR_EOQ_IRQ);
|
|
complete(&priv->completed);
|
|
}
|
|
|
|
/* Disable conversion queue run */
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS, 0);
|
|
|
|
/* Acknowledge all possible irqs */
|
|
regmap_write(priv->regs, MX25_ADCQ_SR, MX25_ADCQ_SR_FRR |
|
|
MX25_ADCQ_SR_FUR | MX25_ADCQ_SR_FOR |
|
|
MX25_ADCQ_SR_EOQ | MX25_ADCQ_SR_PD);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mx25_gcq_get_raw_value(struct device *dev,
|
|
struct iio_chan_spec const *chan,
|
|
struct mx25_gcq_priv *priv,
|
|
int *val)
|
|
{
|
|
long timeout;
|
|
u32 data;
|
|
|
|
/* Setup the configuration we want to use */
|
|
regmap_write(priv->regs, MX25_ADCQ_ITEM_7_0,
|
|
MX25_ADCQ_ITEM(0, chan->channel));
|
|
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_MR, MX25_ADCQ_MR_EOQ_IRQ, 0);
|
|
|
|
/* Trigger queue for one run */
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_CR, MX25_ADCQ_CR_FQS,
|
|
MX25_ADCQ_CR_FQS);
|
|
|
|
timeout = wait_for_completion_interruptible_timeout(
|
|
&priv->completed, MX25_GCQ_TIMEOUT);
|
|
if (timeout < 0) {
|
|
dev_err(dev, "ADC wait for measurement failed\n");
|
|
return timeout;
|
|
} else if (timeout == 0) {
|
|
dev_err(dev, "ADC timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
regmap_read(priv->regs, MX25_ADCQ_FIFO, &data);
|
|
|
|
*val = MX25_ADCQ_FIFO_DATA(data);
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int mx25_gcq_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct mx25_gcq_priv *priv = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = priv->channel_vref_mv[chan->channel];
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info mx25_gcq_iio_info = {
|
|
.read_raw = mx25_gcq_read_raw,
|
|
};
|
|
|
|
static const struct regmap_config mx25_gcq_regconfig = {
|
|
.max_register = 0x5c,
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static int mx25_gcq_setup_cfgs(struct platform_device *pdev,
|
|
struct mx25_gcq_priv *priv)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *child;
|
|
struct device *dev = &pdev->dev;
|
|
unsigned int refp_used[4] = {};
|
|
int ret, i;
|
|
|
|
/*
|
|
* Setup all configurations registers with a default conversion
|
|
* configuration for each input
|
|
*/
|
|
for (i = 0; i < MX25_NUM_CFGS; ++i)
|
|
regmap_write(priv->regs, MX25_ADCQ_CFG(i),
|
|
MX25_ADCQ_CFG_YPLL_OFF |
|
|
MX25_ADCQ_CFG_XNUR_OFF |
|
|
MX25_ADCQ_CFG_XPUL_OFF |
|
|
MX25_ADCQ_CFG_REFP_INT |
|
|
MX25_ADCQ_CFG_IN(i) |
|
|
MX25_ADCQ_CFG_REFN_NGND2);
|
|
|
|
/*
|
|
* First get all regulators to store them in channel_vref_mv if
|
|
* necessary. Later we use that information for proper IIO scale
|
|
* information.
|
|
*/
|
|
priv->vref[MX25_ADC_REFP_INT] = NULL;
|
|
priv->vref[MX25_ADC_REFP_EXT] =
|
|
devm_regulator_get_optional(&pdev->dev, "vref-ext");
|
|
priv->vref[MX25_ADC_REFP_XP] =
|
|
devm_regulator_get_optional(&pdev->dev, "vref-xp");
|
|
priv->vref[MX25_ADC_REFP_YP] =
|
|
devm_regulator_get_optional(&pdev->dev, "vref-yp");
|
|
|
|
for_each_child_of_node(np, child) {
|
|
u32 reg;
|
|
u32 refp = MX25_ADCQ_CFG_REFP_INT;
|
|
u32 refn = MX25_ADCQ_CFG_REFN_NGND2;
|
|
|
|
ret = of_property_read_u32(child, "reg", ®);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get reg property\n");
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
|
|
if (reg >= MX25_NUM_CFGS) {
|
|
dev_err(dev,
|
|
"reg value is greater than the number of available configuration registers\n");
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
of_property_read_u32(child, "fsl,adc-refp", &refp);
|
|
of_property_read_u32(child, "fsl,adc-refn", &refn);
|
|
|
|
switch (refp) {
|
|
case MX25_ADC_REFP_EXT:
|
|
case MX25_ADC_REFP_XP:
|
|
case MX25_ADC_REFP_YP:
|
|
if (IS_ERR(priv->vref[refp])) {
|
|
dev_err(dev, "Error, trying to use external voltage reference without a vref-%s regulator.",
|
|
mx25_gcq_refp_names[refp]);
|
|
of_node_put(child);
|
|
return PTR_ERR(priv->vref[refp]);
|
|
}
|
|
priv->channel_vref_mv[reg] =
|
|
regulator_get_voltage(priv->vref[refp]);
|
|
/* Conversion from uV to mV */
|
|
priv->channel_vref_mv[reg] /= 1000;
|
|
break;
|
|
case MX25_ADC_REFP_INT:
|
|
priv->channel_vref_mv[reg] = 2500;
|
|
break;
|
|
default:
|
|
dev_err(dev, "Invalid positive reference %d\n", refp);
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
++refp_used[refp];
|
|
|
|
/*
|
|
* Shift the read values to the correct positions within the
|
|
* register.
|
|
*/
|
|
refp = MX25_ADCQ_CFG_REFP(refp);
|
|
refn = MX25_ADCQ_CFG_REFN(refn);
|
|
|
|
if ((refp & MX25_ADCQ_CFG_REFP_MASK) != refp) {
|
|
dev_err(dev, "Invalid fsl,adc-refp property value\n");
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
if ((refn & MX25_ADCQ_CFG_REFN_MASK) != refn) {
|
|
dev_err(dev, "Invalid fsl,adc-refn property value\n");
|
|
of_node_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_CFG(reg),
|
|
MX25_ADCQ_CFG_REFP_MASK |
|
|
MX25_ADCQ_CFG_REFN_MASK,
|
|
refp | refn);
|
|
}
|
|
regmap_update_bits(priv->regs, MX25_ADCQ_CR,
|
|
MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST,
|
|
MX25_ADCQ_CR_FRST | MX25_ADCQ_CR_QRST);
|
|
|
|
regmap_write(priv->regs, MX25_ADCQ_CR,
|
|
MX25_ADCQ_CR_PDMSK | MX25_ADCQ_CR_QSM_FQS);
|
|
|
|
/* Remove unused regulators */
|
|
for (i = 0; i != 4; ++i) {
|
|
if (!refp_used[i]) {
|
|
if (!IS_ERR_OR_NULL(priv->vref[i]))
|
|
devm_regulator_put(priv->vref[i]);
|
|
priv->vref[i] = NULL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mx25_gcq_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct mx25_gcq_priv *priv;
|
|
struct mx25_tsadc *tsadc = dev_get_drvdata(pdev->dev.parent);
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
void __iomem *mem;
|
|
int ret;
|
|
int i;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
priv = iio_priv(indio_dev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
mem = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(mem))
|
|
return PTR_ERR(mem);
|
|
|
|
priv->regs = devm_regmap_init_mmio(dev, mem, &mx25_gcq_regconfig);
|
|
if (IS_ERR(priv->regs)) {
|
|
dev_err(dev, "Failed to initialize regmap\n");
|
|
return PTR_ERR(priv->regs);
|
|
}
|
|
|
|
init_completion(&priv->completed);
|
|
|
|
ret = mx25_gcq_setup_cfgs(pdev, priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i != 4; ++i) {
|
|
if (!priv->vref[i])
|
|
continue;
|
|
|
|
ret = regulator_enable(priv->vref[i]);
|
|
if (ret)
|
|
goto err_regulator_disable;
|
|
}
|
|
|
|
priv->clk = tsadc->clk;
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable clock\n");
|
|
goto err_vref_disable;
|
|
}
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (priv->irq <= 0) {
|
|
ret = priv->irq;
|
|
if (!ret)
|
|
ret = -ENXIO;
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
ret = request_irq(priv->irq, mx25_gcq_irq, 0, pdev->name, priv);
|
|
if (ret) {
|
|
dev_err(dev, "Failed requesting IRQ\n");
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->channels = mx25_gcq_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
|
|
indio_dev->info = &mx25_gcq_iio_info;
|
|
indio_dev->name = driver_name;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to register iio device\n");
|
|
goto err_irq_free;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
return 0;
|
|
|
|
err_irq_free:
|
|
free_irq(priv->irq, priv);
|
|
err_clk_unprepare:
|
|
clk_disable_unprepare(priv->clk);
|
|
err_vref_disable:
|
|
i = 4;
|
|
err_regulator_disable:
|
|
for (; i-- > 0;) {
|
|
if (priv->vref[i])
|
|
regulator_disable(priv->vref[i]);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int mx25_gcq_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct mx25_gcq_priv *priv = iio_priv(indio_dev);
|
|
int i;
|
|
|
|
iio_device_unregister(indio_dev);
|
|
free_irq(priv->irq, priv);
|
|
clk_disable_unprepare(priv->clk);
|
|
for (i = 4; i-- > 0;) {
|
|
if (priv->vref[i])
|
|
regulator_disable(priv->vref[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id mx25_gcq_ids[] = {
|
|
{ .compatible = "fsl,imx25-gcq", },
|
|
{ /* Sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mx25_gcq_ids);
|
|
|
|
static struct platform_driver mx25_gcq_driver = {
|
|
.driver = {
|
|
.name = "mx25-gcq",
|
|
.of_match_table = mx25_gcq_ids,
|
|
},
|
|
.probe = mx25_gcq_probe,
|
|
.remove = mx25_gcq_remove,
|
|
};
|
|
module_platform_driver(mx25_gcq_driver);
|
|
|
|
MODULE_DESCRIPTION("ADC driver for Freescale mx25");
|
|
MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
|
|
MODULE_LICENSE("GPL v2");
|