347 lines
8.7 KiB
C
347 lines
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Renesas RZ/G2L WDT Watchdog Driver
|
|
*
|
|
* Copyright (C) 2021 Renesas Electronics Corporation
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/units.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define WDTCNT 0x00
|
|
#define WDTSET 0x04
|
|
#define WDTTIM 0x08
|
|
#define WDTINT 0x0C
|
|
#define PECR 0x10
|
|
#define PEEN 0x14
|
|
#define WDTCNT_WDTEN BIT(0)
|
|
#define WDTINT_INTDISP BIT(0)
|
|
#define PEEN_FORCE BIT(0)
|
|
|
|
#define WDT_DEFAULT_TIMEOUT 60U
|
|
|
|
/* Setting period time register only 12 bit set in WDTSET[31:20] */
|
|
#define WDTSET_COUNTER_MASK (0xFFF00000)
|
|
#define WDTSET_COUNTER_VAL(f) ((f) << 20)
|
|
|
|
#define F2CYCLE_NSEC(f) (1000000000 / (f))
|
|
|
|
#define RZV2M_A_NSEC 730
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
enum rz_wdt_type {
|
|
WDT_RZG2L,
|
|
WDT_RZV2M,
|
|
};
|
|
|
|
struct rzg2l_wdt_priv {
|
|
void __iomem *base;
|
|
struct watchdog_device wdev;
|
|
struct reset_control *rstc;
|
|
unsigned long osc_clk_rate;
|
|
unsigned long delay;
|
|
unsigned long minimum_assertion_period;
|
|
struct clk *pclk;
|
|
struct clk *osc_clk;
|
|
enum rz_wdt_type devtype;
|
|
};
|
|
|
|
static int rzg2l_wdt_reset(struct rzg2l_wdt_priv *priv)
|
|
{
|
|
int err, status;
|
|
|
|
if (priv->devtype == WDT_RZV2M) {
|
|
/* WDT needs TYPE-B reset control */
|
|
err = reset_control_assert(priv->rstc);
|
|
if (err)
|
|
return err;
|
|
ndelay(priv->minimum_assertion_period);
|
|
err = reset_control_deassert(priv->rstc);
|
|
if (err)
|
|
return err;
|
|
err = read_poll_timeout(reset_control_status, status,
|
|
status != 1, 0, 1000, false,
|
|
priv->rstc);
|
|
} else {
|
|
err = reset_control_reset(priv->rstc);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
|
|
{
|
|
/* delay timer when change the setting register */
|
|
ndelay(priv->delay);
|
|
}
|
|
|
|
static u32 rzg2l_wdt_get_cycle_usec(unsigned long cycle, u32 wdttime)
|
|
{
|
|
u64 timer_cycle_us = 1024 * 1024ULL * (wdttime + 1) * MICRO;
|
|
|
|
return div64_ul(timer_cycle_us, cycle);
|
|
}
|
|
|
|
static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val, unsigned int reg)
|
|
{
|
|
if (reg == WDTSET)
|
|
val &= WDTSET_COUNTER_MASK;
|
|
|
|
writel_relaxed(val, priv->base + reg);
|
|
/* Registers other than the WDTINT is always synchronized with WDT_CLK */
|
|
if (reg != WDTINT)
|
|
rzg2l_wdt_wait_delay(priv);
|
|
}
|
|
|
|
static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev)
|
|
{
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
u32 time_out;
|
|
|
|
/* Clear Lapsed Time Register and clear Interrupt */
|
|
rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
|
|
/* 2 consecutive overflow cycle needed to trigger reset */
|
|
time_out = (wdev->timeout * (MICRO / 2)) /
|
|
rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0);
|
|
rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET);
|
|
}
|
|
|
|
static int rzg2l_wdt_start(struct watchdog_device *wdev)
|
|
{
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(wdev->parent);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Initialize time out */
|
|
rzg2l_wdt_init_timeout(wdev);
|
|
|
|
/* Initialize watchdog counter register */
|
|
rzg2l_wdt_write(priv, 0, WDTTIM);
|
|
|
|
/* Enable watchdog timer*/
|
|
rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzg2l_wdt_stop(struct watchdog_device *wdev)
|
|
{
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
int ret;
|
|
|
|
rzg2l_wdt_reset(priv);
|
|
|
|
ret = pm_runtime_put(wdev->parent);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
|
|
{
|
|
int ret = 0;
|
|
|
|
wdev->timeout = timeout;
|
|
|
|
/*
|
|
* If the watchdog is active, reset the module for updating the WDTSET
|
|
* register by calling rzg2l_wdt_stop() (which internally calls reset_control_reset()
|
|
* to reset the module) so that it is updated with new timeout values.
|
|
*/
|
|
if (watchdog_active(wdev)) {
|
|
ret = rzg2l_wdt_stop(wdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rzg2l_wdt_start(wdev);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rzg2l_wdt_restart(struct watchdog_device *wdev,
|
|
unsigned long action, void *data)
|
|
{
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
|
|
clk_prepare_enable(priv->pclk);
|
|
clk_prepare_enable(priv->osc_clk);
|
|
|
|
if (priv->devtype == WDT_RZG2L) {
|
|
/* Generate Reset (WDTRSTB) Signal on parity error */
|
|
rzg2l_wdt_write(priv, 0, PECR);
|
|
|
|
/* Force parity error */
|
|
rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
|
|
} else {
|
|
/* RZ/V2M doesn't have parity error registers */
|
|
rzg2l_wdt_reset(priv);
|
|
|
|
wdev->timeout = 0;
|
|
|
|
/* Initialize time out */
|
|
rzg2l_wdt_init_timeout(wdev);
|
|
|
|
/* Initialize watchdog counter register */
|
|
rzg2l_wdt_write(priv, 0, WDTTIM);
|
|
|
|
/* Enable watchdog timer*/
|
|
rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
|
|
|
|
/* Wait 2 consecutive overflow cycles for reset */
|
|
mdelay(DIV_ROUND_UP(2 * 0xFFFFF * 1000, priv->osc_clk_rate));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info rzg2l_wdt_ident = {
|
|
.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
|
|
.identity = "Renesas RZ/G2L WDT Watchdog",
|
|
};
|
|
|
|
static int rzg2l_wdt_ping(struct watchdog_device *wdev)
|
|
{
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
|
|
rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_ops rzg2l_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = rzg2l_wdt_start,
|
|
.stop = rzg2l_wdt_stop,
|
|
.ping = rzg2l_wdt_ping,
|
|
.set_timeout = rzg2l_wdt_set_timeout,
|
|
.restart = rzg2l_wdt_restart,
|
|
};
|
|
|
|
static void rzg2l_wdt_reset_assert_pm_disable(void *data)
|
|
{
|
|
struct watchdog_device *wdev = data;
|
|
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
|
|
|
|
pm_runtime_disable(wdev->parent);
|
|
reset_control_assert(priv->rstc);
|
|
}
|
|
|
|
static int rzg2l_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct rzg2l_wdt_priv *priv;
|
|
unsigned long pclk_rate;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
/* Get watchdog main clock */
|
|
priv->osc_clk = devm_clk_get(&pdev->dev, "oscclk");
|
|
if (IS_ERR(priv->osc_clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(priv->osc_clk), "no oscclk");
|
|
|
|
priv->osc_clk_rate = clk_get_rate(priv->osc_clk);
|
|
if (!priv->osc_clk_rate)
|
|
return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0");
|
|
|
|
/* Get Peripheral clock */
|
|
priv->pclk = devm_clk_get(&pdev->dev, "pclk");
|
|
if (IS_ERR(priv->pclk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk), "no pclk");
|
|
|
|
pclk_rate = clk_get_rate(priv->pclk);
|
|
if (!pclk_rate)
|
|
return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0");
|
|
|
|
priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 + F2CYCLE_NSEC(pclk_rate) * 9;
|
|
|
|
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->rstc))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc),
|
|
"failed to get cpg reset");
|
|
|
|
ret = reset_control_deassert(priv->rstc);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "failed to deassert");
|
|
|
|
priv->devtype = (uintptr_t)of_device_get_match_data(dev);
|
|
|
|
if (priv->devtype == WDT_RZV2M) {
|
|
priv->minimum_assertion_period = RZV2M_A_NSEC +
|
|
3 * F2CYCLE_NSEC(pclk_rate) + 5 *
|
|
max(F2CYCLE_NSEC(priv->osc_clk_rate),
|
|
F2CYCLE_NSEC(pclk_rate));
|
|
}
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
priv->wdev.info = &rzg2l_wdt_ident;
|
|
priv->wdev.ops = &rzg2l_wdt_ops;
|
|
priv->wdev.parent = dev;
|
|
priv->wdev.min_timeout = 1;
|
|
priv->wdev.max_timeout = rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0xfff) /
|
|
USEC_PER_SEC;
|
|
priv->wdev.timeout = WDT_DEFAULT_TIMEOUT;
|
|
|
|
watchdog_set_drvdata(&priv->wdev, priv);
|
|
ret = devm_add_action_or_reset(&pdev->dev,
|
|
rzg2l_wdt_reset_assert_pm_disable,
|
|
&priv->wdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
watchdog_set_nowayout(&priv->wdev, nowayout);
|
|
watchdog_stop_on_unregister(&priv->wdev);
|
|
|
|
ret = watchdog_init_timeout(&priv->wdev, 0, dev);
|
|
if (ret)
|
|
dev_warn(dev, "Specified timeout invalid, using default");
|
|
|
|
return devm_watchdog_register_device(&pdev->dev, &priv->wdev);
|
|
}
|
|
|
|
static const struct of_device_id rzg2l_wdt_ids[] = {
|
|
{ .compatible = "renesas,rzg2l-wdt", .data = (void *)WDT_RZG2L },
|
|
{ .compatible = "renesas,rzv2m-wdt", .data = (void *)WDT_RZV2M },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids);
|
|
|
|
static struct platform_driver rzg2l_wdt_driver = {
|
|
.driver = {
|
|
.name = "rzg2l_wdt",
|
|
.of_match_table = rzg2l_wdt_ids,
|
|
},
|
|
.probe = rzg2l_wdt_probe,
|
|
};
|
|
module_platform_driver(rzg2l_wdt_driver);
|
|
|
|
MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver");
|
|
MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
|
|
MODULE_LICENSE("GPL v2");
|