5020 lines
130 KiB
C
5020 lines
130 KiB
C
/*
|
|
* New driver for Marvell Yukon 2 chipset.
|
|
* Based on earlier sk98lin, and skge driver.
|
|
*
|
|
* This driver intentionally does not support all the features
|
|
* of the original driver such as link fail-over and link management because
|
|
* those should be done at higher levels.
|
|
*
|
|
* Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/crc32.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ip.h>
|
|
#include <linux/slab.h>
|
|
#include <net/ip.h>
|
|
#include <linux/tcp.h>
|
|
#include <linux/in.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/prefetch.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include "sky2.h"
|
|
|
|
#define DRV_NAME "sky2"
|
|
#define DRV_VERSION "1.28"
|
|
|
|
/*
|
|
* The Yukon II chipset takes 64 bit command blocks (called list elements)
|
|
* that are organized into three (receive, transmit, status) different rings
|
|
* similar to Tigon3.
|
|
*/
|
|
|
|
#define RX_LE_SIZE 1024
|
|
#define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le))
|
|
#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2)
|
|
#define RX_DEF_PENDING RX_MAX_PENDING
|
|
|
|
/* This is the worst case number of transmit list elements for a single skb:
|
|
VLAN:GSO + CKSUM + Data + skb_frags * DMA */
|
|
#define MAX_SKB_TX_LE (2 + (sizeof(dma_addr_t)/sizeof(u32))*(MAX_SKB_FRAGS+1))
|
|
#define TX_MIN_PENDING (MAX_SKB_TX_LE+1)
|
|
#define TX_MAX_PENDING 1024
|
|
#define TX_DEF_PENDING 127
|
|
|
|
#define TX_WATCHDOG (5 * HZ)
|
|
#define NAPI_WEIGHT 64
|
|
#define PHY_RETRIES 1000
|
|
|
|
#define SKY2_EEPROM_MAGIC 0x9955aabb
|
|
|
|
#define RING_NEXT(x, s) (((x)+1) & ((s)-1))
|
|
|
|
static const u32 default_msg =
|
|
NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
|
|
| NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
|
|
| NETIF_MSG_IFUP | NETIF_MSG_IFDOWN;
|
|
|
|
static int debug = -1; /* defaults above */
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
|
|
|
|
static int copybreak __read_mostly = 128;
|
|
module_param(copybreak, int, 0);
|
|
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
|
|
|
|
static int disable_msi = 0;
|
|
module_param(disable_msi, int, 0);
|
|
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, sky2_id_table);
|
|
|
|
/* Avoid conditionals by using array */
|
|
static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
|
|
static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
|
|
static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
|
|
|
|
static void sky2_set_multicast(struct net_device *dev);
|
|
|
|
/* Access to PHY via serial interconnect */
|
|
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
|
|
{
|
|
int i;
|
|
|
|
gma_write16(hw, port, GM_SMI_DATA, val);
|
|
gma_write16(hw, port, GM_SMI_CTRL,
|
|
GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
|
|
|
|
for (i = 0; i < PHY_RETRIES; i++) {
|
|
u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
|
|
if (ctrl == 0xffff)
|
|
goto io_error;
|
|
|
|
if (!(ctrl & GM_SMI_CT_BUSY))
|
|
return 0;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
dev_warn(&hw->pdev->dev, "%s: phy write timeout\n", hw->dev[port]->name);
|
|
return -ETIMEDOUT;
|
|
|
|
io_error:
|
|
dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
|
|
return -EIO;
|
|
}
|
|
|
|
static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
|
|
{
|
|
int i;
|
|
|
|
gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV)
|
|
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
|
|
|
|
for (i = 0; i < PHY_RETRIES; i++) {
|
|
u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
|
|
if (ctrl == 0xffff)
|
|
goto io_error;
|
|
|
|
if (ctrl & GM_SMI_CT_RD_VAL) {
|
|
*val = gma_read16(hw, port, GM_SMI_DATA);
|
|
return 0;
|
|
}
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
|
|
return -ETIMEDOUT;
|
|
io_error:
|
|
dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
|
|
return -EIO;
|
|
}
|
|
|
|
static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
|
|
{
|
|
u16 v;
|
|
__gm_phy_read(hw, port, reg, &v);
|
|
return v;
|
|
}
|
|
|
|
|
|
static void sky2_power_on(struct sky2_hw *hw)
|
|
{
|
|
/* switch power to VCC (WA for VAUX problem) */
|
|
sky2_write8(hw, B0_POWER_CTRL,
|
|
PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
|
|
|
|
/* disable Core Clock Division, */
|
|
sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
|
|
/* enable bits are inverted */
|
|
sky2_write8(hw, B2_Y2_CLK_GATE,
|
|
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
|
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
|
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
|
else
|
|
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
|
|
|
if (hw->flags & SKY2_HW_ADV_POWER_CTL) {
|
|
u32 reg;
|
|
|
|
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
|
|
|
|
reg = sky2_pci_read32(hw, PCI_DEV_REG4);
|
|
/* set all bits to 0 except bits 15..12 and 8 */
|
|
reg &= P_ASPM_CONTROL_MSK;
|
|
sky2_pci_write32(hw, PCI_DEV_REG4, reg);
|
|
|
|
reg = sky2_pci_read32(hw, PCI_DEV_REG5);
|
|
/* set all bits to 0 except bits 28 & 27 */
|
|
reg &= P_CTL_TIM_VMAIN_AV_MSK;
|
|
sky2_pci_write32(hw, PCI_DEV_REG5, reg);
|
|
|
|
sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
|
|
|
|
sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
|
|
|
|
/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
|
|
reg = sky2_read32(hw, B2_GP_IO);
|
|
reg |= GLB_GPIO_STAT_RACE_DIS;
|
|
sky2_write32(hw, B2_GP_IO, reg);
|
|
|
|
sky2_read32(hw, B2_GP_IO);
|
|
}
|
|
|
|
/* Turn on "driver loaded" LED */
|
|
sky2_write16(hw, B0_CTST, Y2_LED_STAT_ON);
|
|
}
|
|
|
|
static void sky2_power_aux(struct sky2_hw *hw)
|
|
{
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
|
|
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
|
|
else
|
|
/* enable bits are inverted */
|
|
sky2_write8(hw, B2_Y2_CLK_GATE,
|
|
Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
|
|
Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
|
|
Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
|
|
|
|
/* switch power to VAUX if supported and PME from D3cold */
|
|
if ( (sky2_read32(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
|
|
pci_pme_capable(hw->pdev, PCI_D3cold))
|
|
sky2_write8(hw, B0_POWER_CTRL,
|
|
(PC_VAUX_ENA | PC_VCC_ENA |
|
|
PC_VAUX_ON | PC_VCC_OFF));
|
|
|
|
/* turn off "driver loaded LED" */
|
|
sky2_write16(hw, B0_CTST, Y2_LED_STAT_OFF);
|
|
}
|
|
|
|
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
u16 reg;
|
|
|
|
/* disable all GMAC IRQ's */
|
|
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
|
|
|
|
gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
|
|
gma_write16(hw, port, GM_MC_ADDR_H2, 0);
|
|
gma_write16(hw, port, GM_MC_ADDR_H3, 0);
|
|
gma_write16(hw, port, GM_MC_ADDR_H4, 0);
|
|
|
|
reg = gma_read16(hw, port, GM_RX_CTRL);
|
|
reg |= GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA;
|
|
gma_write16(hw, port, GM_RX_CTRL, reg);
|
|
}
|
|
|
|
/* flow control to advertise bits */
|
|
static const u16 copper_fc_adv[] = {
|
|
[FC_NONE] = 0,
|
|
[FC_TX] = PHY_M_AN_ASP,
|
|
[FC_RX] = PHY_M_AN_PC,
|
|
[FC_BOTH] = PHY_M_AN_PC | PHY_M_AN_ASP,
|
|
};
|
|
|
|
/* flow control to advertise bits when using 1000BaseX */
|
|
static const u16 fiber_fc_adv[] = {
|
|
[FC_NONE] = PHY_M_P_NO_PAUSE_X,
|
|
[FC_TX] = PHY_M_P_ASYM_MD_X,
|
|
[FC_RX] = PHY_M_P_SYM_MD_X,
|
|
[FC_BOTH] = PHY_M_P_BOTH_MD_X,
|
|
};
|
|
|
|
/* flow control to GMA disable bits */
|
|
static const u16 gm_fc_disable[] = {
|
|
[FC_NONE] = GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS,
|
|
[FC_TX] = GM_GPCR_FC_RX_DIS,
|
|
[FC_RX] = GM_GPCR_FC_TX_DIS,
|
|
[FC_BOTH] = 0,
|
|
};
|
|
|
|
|
|
static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
|
|
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
|
|
|
|
if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
|
|
!(hw->flags & SKY2_HW_NEWER_PHY)) {
|
|
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
|
|
|
|
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
|
|
PHY_M_EC_MAC_S_MSK);
|
|
ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
|
|
|
|
/* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC)
|
|
/* set downshift counter to 3x and enable downshift */
|
|
ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA;
|
|
else
|
|
/* set master & slave downshift counter to 1x */
|
|
ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
|
|
}
|
|
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
if (sky2_is_copper(hw)) {
|
|
if (!(hw->flags & SKY2_HW_GIGABIT)) {
|
|
/* enable automatic crossover */
|
|
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1;
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
hw->chip_rev == CHIP_REV_YU_FE2_A0) {
|
|
u16 spec;
|
|
|
|
/* Enable Class A driver for FE+ A0 */
|
|
spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2);
|
|
spec |= PHY_M_FESC_SEL_CL_A;
|
|
gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec);
|
|
}
|
|
} else {
|
|
/* disable energy detect */
|
|
ctrl &= ~PHY_M_PC_EN_DET_MSK;
|
|
|
|
/* enable automatic crossover */
|
|
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
|
|
|
|
/* downshift on PHY 88E1112 and 88E1149 is changed */
|
|
if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
|
|
(hw->flags & SKY2_HW_NEWER_PHY)) {
|
|
/* set downshift counter to 3x and enable downshift */
|
|
ctrl &= ~PHY_M_PC_DSC_MSK;
|
|
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
|
|
}
|
|
}
|
|
} else {
|
|
/* workaround for deviation #4.88 (CRC errors) */
|
|
/* disable Automatic Crossover */
|
|
|
|
ctrl &= ~PHY_M_PC_MDIX_MSK;
|
|
}
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
|
|
/* special setup for PHY 88E1112 Fiber */
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) {
|
|
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
|
|
|
|
/* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
ctrl &= ~PHY_M_MAC_MD_MSK;
|
|
ctrl |= PHY_M_MAC_MODE_SEL(PHY_M_MAC_MD_1000BX);
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
|
|
if (hw->pmd_type == 'P') {
|
|
/* select page 1 to access Fiber registers */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 1);
|
|
|
|
/* for SFP-module set SIGDET polarity to low */
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
ctrl |= PHY_M_FIB_SIGD_POL;
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
}
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
|
|
}
|
|
|
|
ctrl = PHY_CT_RESET;
|
|
ct1000 = 0;
|
|
adv = PHY_AN_CSMA;
|
|
reg = 0;
|
|
|
|
if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
|
|
if (sky2_is_copper(hw)) {
|
|
if (sky2->advertising & ADVERTISED_1000baseT_Full)
|
|
ct1000 |= PHY_M_1000C_AFD;
|
|
if (sky2->advertising & ADVERTISED_1000baseT_Half)
|
|
ct1000 |= PHY_M_1000C_AHD;
|
|
if (sky2->advertising & ADVERTISED_100baseT_Full)
|
|
adv |= PHY_M_AN_100_FD;
|
|
if (sky2->advertising & ADVERTISED_100baseT_Half)
|
|
adv |= PHY_M_AN_100_HD;
|
|
if (sky2->advertising & ADVERTISED_10baseT_Full)
|
|
adv |= PHY_M_AN_10_FD;
|
|
if (sky2->advertising & ADVERTISED_10baseT_Half)
|
|
adv |= PHY_M_AN_10_HD;
|
|
|
|
} else { /* special defines for FIBER (88E1040S only) */
|
|
if (sky2->advertising & ADVERTISED_1000baseT_Full)
|
|
adv |= PHY_M_AN_1000X_AFD;
|
|
if (sky2->advertising & ADVERTISED_1000baseT_Half)
|
|
adv |= PHY_M_AN_1000X_AHD;
|
|
}
|
|
|
|
/* Restart Auto-negotiation */
|
|
ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
|
|
} else {
|
|
/* forced speed/duplex settings */
|
|
ct1000 = PHY_M_1000C_MSE;
|
|
|
|
/* Disable auto update for duplex flow control and duplex */
|
|
reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
|
|
|
|
switch (sky2->speed) {
|
|
case SPEED_1000:
|
|
ctrl |= PHY_CT_SP1000;
|
|
reg |= GM_GPCR_SPEED_1000;
|
|
break;
|
|
case SPEED_100:
|
|
ctrl |= PHY_CT_SP100;
|
|
reg |= GM_GPCR_SPEED_100;
|
|
break;
|
|
}
|
|
|
|
if (sky2->duplex == DUPLEX_FULL) {
|
|
reg |= GM_GPCR_DUP_FULL;
|
|
ctrl |= PHY_CT_DUP_MD;
|
|
} else if (sky2->speed < SPEED_1000)
|
|
sky2->flow_mode = FC_NONE;
|
|
}
|
|
|
|
if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
|
|
if (sky2_is_copper(hw))
|
|
adv |= copper_fc_adv[sky2->flow_mode];
|
|
else
|
|
adv |= fiber_fc_adv[sky2->flow_mode];
|
|
} else {
|
|
reg |= GM_GPCR_AU_FCT_DIS;
|
|
reg |= gm_fc_disable[sky2->flow_mode];
|
|
|
|
/* Forward pause packets to GMAC? */
|
|
if (sky2->flow_mode & FC_RX)
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
|
|
else
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
|
|
}
|
|
|
|
gma_write16(hw, port, GM_GP_CTRL, reg);
|
|
|
|
if (hw->flags & SKY2_HW_GIGABIT)
|
|
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
|
|
gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
|
|
|
|
/* Setup Phy LED's */
|
|
ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
|
|
ledover = 0;
|
|
|
|
switch (hw->chip_id) {
|
|
case CHIP_ID_YUKON_FE:
|
|
/* on 88E3082 these bits are at 11..9 (shifted left) */
|
|
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
|
|
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR);
|
|
|
|
/* delete ACT LED control bits */
|
|
ctrl &= ~PHY_M_FELP_LED1_MSK;
|
|
/* change ACT LED control to blink mode */
|
|
ctrl |= PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL);
|
|
gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_FE_P:
|
|
/* Enable Link Partner Next Page */
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
ctrl |= PHY_M_PC_ENA_LIP_NP;
|
|
|
|
/* disable Energy Detect and enable scrambler */
|
|
ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB);
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
|
|
/* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */
|
|
ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) |
|
|
PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) |
|
|
PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED);
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl);
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_XL:
|
|
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
|
|
|
|
/* select page 3 to access LED control register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
|
|
|
|
/* set LED Function Control register */
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
(PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
|
|
PHY_M_LEDC_INIT_CTRL(7) | /* 10 Mbps */
|
|
PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
|
|
PHY_M_LEDC_STA0_CTRL(7))); /* 1000 Mbps */
|
|
|
|
/* set Polarity Control register */
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
|
|
(PHY_M_POLC_LS1_P_MIX(4) |
|
|
PHY_M_POLC_IS0_P_MIX(4) |
|
|
PHY_M_POLC_LOS_CTRL(2) |
|
|
PHY_M_POLC_INIT_CTRL(2) |
|
|
PHY_M_POLC_STA1_CTRL(2) |
|
|
PHY_M_POLC_STA0_CTRL(2)));
|
|
|
|
/* restore page register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_EC_U:
|
|
case CHIP_ID_YUKON_EX:
|
|
case CHIP_ID_YUKON_SUPR:
|
|
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
|
|
|
|
/* select page 3 to access LED control register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
|
|
|
|
/* set LED Function Control register */
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
(PHY_M_LEDC_LOS_CTRL(1) | /* LINK/ACT */
|
|
PHY_M_LEDC_INIT_CTRL(8) | /* 10 Mbps */
|
|
PHY_M_LEDC_STA1_CTRL(7) | /* 100 Mbps */
|
|
PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
|
|
|
|
/* set Blink Rate in LED Timer Control Register */
|
|
gm_phy_write(hw, port, PHY_MARV_INT_MASK,
|
|
ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
|
|
/* restore page register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
|
|
break;
|
|
|
|
default:
|
|
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
|
|
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
|
|
|
|
/* turn off the Rx LED (LED_RX) */
|
|
ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
|
|
}
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_UL_2) {
|
|
/* apply fixes in PHY AFE */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
|
|
|
|
/* increase differential signal amplitude in 10BASE-T */
|
|
gm_phy_write(hw, port, 0x18, 0xaa99);
|
|
gm_phy_write(hw, port, 0x17, 0x2011);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
|
|
/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
|
|
gm_phy_write(hw, port, 0x18, 0xa204);
|
|
gm_phy_write(hw, port, 0x17, 0x2002);
|
|
}
|
|
|
|
/* set page register to 0 */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
|
|
} else if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
hw->chip_rev == CHIP_REV_YU_FE2_A0) {
|
|
/* apply workaround for integrated resistors calibration */
|
|
gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
|
|
gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
|
|
} else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
|
|
/* apply fixes in PHY AFE */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
|
|
|
|
/* apply RDAC termination workaround */
|
|
gm_phy_write(hw, port, 24, 0x2800);
|
|
gm_phy_write(hw, port, 23, 0x2001);
|
|
|
|
/* set page register back to 0 */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
|
|
} else if (hw->chip_id != CHIP_ID_YUKON_EX &&
|
|
hw->chip_id < CHIP_ID_YUKON_SUPR) {
|
|
/* no effect on Yukon-XL */
|
|
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
|
|
|
|
if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
|
|
sky2->speed == SPEED_100) {
|
|
/* turn on 100 Mbps LED (LED_LINK100) */
|
|
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
|
|
}
|
|
|
|
if (ledover)
|
|
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
|
|
|
|
}
|
|
|
|
/* Enable phy interrupt on auto-negotiation complete (or link up) */
|
|
if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
|
|
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
|
|
else
|
|
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
|
|
}
|
|
|
|
static const u32 phy_power[] = { PCI_Y2_PHY1_POWD, PCI_Y2_PHY2_POWD };
|
|
static const u32 coma_mode[] = { PCI_Y2_PHY1_COMA, PCI_Y2_PHY2_COMA };
|
|
|
|
static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
u32 reg1;
|
|
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
|
|
reg1 &= ~phy_power[port];
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > CHIP_REV_YU_XL_A1)
|
|
reg1 |= coma_mode[port];
|
|
|
|
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
sky2_pci_read32(hw, PCI_DEV_REG1);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_FE)
|
|
gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
|
|
else if (hw->flags & SKY2_HW_ADV_POWER_CTL)
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
|
|
}
|
|
|
|
static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
u32 reg1;
|
|
u16 ctrl;
|
|
|
|
/* release GPHY Control reset */
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
|
|
|
|
/* release GMAC reset */
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
|
|
|
|
if (hw->flags & SKY2_HW_NEWER_PHY) {
|
|
/* select page 2 to access MAC control register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
|
|
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
/* allow GMII Power Down */
|
|
ctrl &= ~PHY_M_MAC_GMIF_PUP;
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
|
|
/* set page register back to 0 */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
|
|
}
|
|
|
|
/* setup General Purpose Control Register */
|
|
gma_write16(hw, port, GM_GP_CTRL,
|
|
GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
|
|
GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
|
|
GM_GPCR_AU_SPD_DIS);
|
|
|
|
if (hw->chip_id != CHIP_ID_YUKON_EC) {
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
|
|
/* select page 2 to access MAC control register */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
|
|
|
|
ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
|
|
/* enable Power Down */
|
|
ctrl |= PHY_M_PC_POW_D_ENA;
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
|
|
|
|
/* set page register back to 0 */
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
|
|
}
|
|
|
|
/* set IEEE compatible Power Down Mode (dev. #4.99) */
|
|
gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
|
|
}
|
|
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
|
|
reg1 |= phy_power[port]; /* set PHY to PowerDown/COMA Mode */
|
|
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
}
|
|
|
|
/* Enable Rx/Tx */
|
|
static void sky2_enable_rx_tx(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u16 reg;
|
|
|
|
reg = gma_read16(hw, port, GM_GP_CTRL);
|
|
reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
|
|
gma_write16(hw, port, GM_GP_CTRL, reg);
|
|
}
|
|
|
|
/* Force a renegotiation */
|
|
static void sky2_phy_reinit(struct sky2_port *sky2)
|
|
{
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
sky2_phy_init(sky2->hw, sky2->port);
|
|
sky2_enable_rx_tx(sky2);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
}
|
|
|
|
/* Put device in state to listen for Wake On Lan */
|
|
static void sky2_wol_init(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
enum flow_control save_mode;
|
|
u16 ctrl;
|
|
|
|
/* Bring hardware out of reset */
|
|
sky2_write16(hw, B0_CTST, CS_RST_CLR);
|
|
sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
|
|
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
|
|
|
|
/* Force to 10/100
|
|
* sky2_reset will re-enable on resume
|
|
*/
|
|
save_mode = sky2->flow_mode;
|
|
ctrl = sky2->advertising;
|
|
|
|
sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
|
|
sky2->flow_mode = FC_NONE;
|
|
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
sky2_phy_power_up(hw, port);
|
|
sky2_phy_init(hw, port);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
|
|
sky2->flow_mode = save_mode;
|
|
sky2->advertising = ctrl;
|
|
|
|
/* Set GMAC to no flow control and auto update for speed/duplex */
|
|
gma_write16(hw, port, GM_GP_CTRL,
|
|
GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
|
|
GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
|
|
|
|
/* Set WOL address */
|
|
memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
|
|
sky2->netdev->dev_addr, ETH_ALEN);
|
|
|
|
/* Turn on appropriate WOL control bits */
|
|
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
|
|
ctrl = 0;
|
|
if (sky2->wol & WAKE_PHY)
|
|
ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
|
|
else
|
|
ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
|
|
|
|
if (sky2->wol & WAKE_MAGIC)
|
|
ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
|
|
else
|
|
ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
|
|
|
|
ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
|
|
sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
|
|
|
|
/* Disable PiG firmware */
|
|
sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF);
|
|
|
|
/* block receiver */
|
|
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
|
|
}
|
|
|
|
static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
|
|
if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
|
|
hw->chip_rev != CHIP_REV_YU_EX_A0) ||
|
|
hw->chip_id >= CHIP_ID_YUKON_FE_P) {
|
|
/* Yukon-Extreme B0 and further Extreme devices */
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
|
|
} else if (dev->mtu > ETH_DATA_LEN) {
|
|
/* set Tx GMAC FIFO Almost Empty Threshold */
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
|
|
(ECU_JUMBO_WM << 16) | ECU_AE_THR);
|
|
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS);
|
|
} else
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_ENA);
|
|
}
|
|
|
|
static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
|
|
u16 reg;
|
|
u32 rx_reg;
|
|
int i;
|
|
const u8 *addr = hw->dev[port]->dev_addr;
|
|
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
|
|
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL &&
|
|
hw->chip_rev == CHIP_REV_YU_XL_A0 &&
|
|
port == 1) {
|
|
/* WA DEV_472 -- looks like crossed wires on port 2 */
|
|
/* clear GMAC 1 Control reset */
|
|
sky2_write8(hw, SK_REG(0, GMAC_CTRL), GMC_RST_CLR);
|
|
do {
|
|
sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_SET);
|
|
sky2_write8(hw, SK_REG(1, GMAC_CTRL), GMC_RST_CLR);
|
|
} while (gm_phy_read(hw, 1, PHY_MARV_ID0) != PHY_MARV_ID0_VAL ||
|
|
gm_phy_read(hw, 1, PHY_MARV_ID1) != PHY_MARV_ID1_Y2 ||
|
|
gm_phy_read(hw, 1, PHY_MARV_INT_MASK) != 0);
|
|
}
|
|
|
|
sky2_read16(hw, SK_REG(port, GMAC_IRQ_SRC));
|
|
|
|
/* Enable Transmit FIFO Underrun */
|
|
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
|
|
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
sky2_phy_power_up(hw, port);
|
|
sky2_phy_init(hw, port);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
|
|
/* MIB clear */
|
|
reg = gma_read16(hw, port, GM_PHY_ADDR);
|
|
gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR);
|
|
|
|
for (i = GM_MIB_CNT_BASE; i <= GM_MIB_CNT_END; i += 4)
|
|
gma_read16(hw, port, i);
|
|
gma_write16(hw, port, GM_PHY_ADDR, reg);
|
|
|
|
/* transmit control */
|
|
gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF));
|
|
|
|
/* receive control reg: unicast + multicast + no FCS */
|
|
gma_write16(hw, port, GM_RX_CTRL,
|
|
GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA);
|
|
|
|
/* transmit flow control */
|
|
gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff);
|
|
|
|
/* transmit parameter */
|
|
gma_write16(hw, port, GM_TX_PARAM,
|
|
TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) |
|
|
TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) |
|
|
TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) |
|
|
TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
|
|
|
|
/* serial mode register */
|
|
reg = DATA_BLIND_VAL(DATA_BLIND_DEF) |
|
|
GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
|
|
|
|
if (hw->dev[port]->mtu > ETH_DATA_LEN)
|
|
reg |= GM_SMOD_JUMBO_ENA;
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
|
|
hw->chip_rev == CHIP_REV_YU_EC_U_B1)
|
|
reg |= GM_NEW_FLOW_CTRL;
|
|
|
|
gma_write16(hw, port, GM_SERIAL_MODE, reg);
|
|
|
|
/* virtual address for data */
|
|
gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr);
|
|
|
|
/* physical address: used for pause frames */
|
|
gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr);
|
|
|
|
/* ignore counter overflows */
|
|
gma_write16(hw, port, GM_TX_IRQ_MSK, 0);
|
|
gma_write16(hw, port, GM_RX_IRQ_MSK, 0);
|
|
gma_write16(hw, port, GM_TR_IRQ_MSK, 0);
|
|
|
|
/* Configure Rx MAC FIFO */
|
|
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
|
|
rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
|
|
if (hw->chip_id == CHIP_ID_YUKON_EX ||
|
|
hw->chip_id == CHIP_ID_YUKON_FE_P)
|
|
rx_reg |= GMF_RX_OVER_ON;
|
|
|
|
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL) {
|
|
/* Hardware errata - clear flush mask */
|
|
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), 0);
|
|
} else {
|
|
/* Flush Rx MAC FIFO on any flow control or error */
|
|
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
|
|
}
|
|
|
|
/* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
|
|
reg = RX_GMF_FL_THR_DEF + 1;
|
|
/* Another magic mystery workaround from sk98lin */
|
|
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
hw->chip_rev == CHIP_REV_YU_FE2_A0)
|
|
reg = 0x178;
|
|
sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg);
|
|
|
|
/* Configure Tx MAC FIFO */
|
|
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
|
|
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
|
|
|
|
/* On chips without ram buffer, pause is controlled by MAC level */
|
|
if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
|
|
/* Pause threshold is scaled by 8 in bytes */
|
|
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
hw->chip_rev == CHIP_REV_YU_FE2_A0)
|
|
reg = 1568 / 8;
|
|
else
|
|
reg = 1024 / 8;
|
|
sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
|
|
sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
|
|
|
|
sky2_set_tx_stfwd(hw, port);
|
|
}
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
hw->chip_rev == CHIP_REV_YU_FE2_A0) {
|
|
/* disable dynamic watermark */
|
|
reg = sky2_read16(hw, SK_REG(port, TX_GMF_EA));
|
|
reg &= ~TX_DYN_WM_ENA;
|
|
sky2_write16(hw, SK_REG(port, TX_GMF_EA), reg);
|
|
}
|
|
}
|
|
|
|
/* Assign Ram Buffer allocation to queue */
|
|
static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
|
|
{
|
|
u32 end;
|
|
|
|
/* convert from K bytes to qwords used for hw register */
|
|
start *= 1024/8;
|
|
space *= 1024/8;
|
|
end = start + space - 1;
|
|
|
|
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
|
|
sky2_write32(hw, RB_ADDR(q, RB_START), start);
|
|
sky2_write32(hw, RB_ADDR(q, RB_END), end);
|
|
sky2_write32(hw, RB_ADDR(q, RB_WP), start);
|
|
sky2_write32(hw, RB_ADDR(q, RB_RP), start);
|
|
|
|
if (q == Q_R1 || q == Q_R2) {
|
|
u32 tp = space - space/4;
|
|
|
|
/* On receive queue's set the thresholds
|
|
* give receiver priority when > 3/4 full
|
|
* send pause when down to 2K
|
|
*/
|
|
sky2_write32(hw, RB_ADDR(q, RB_RX_UTHP), tp);
|
|
sky2_write32(hw, RB_ADDR(q, RB_RX_LTHP), space/2);
|
|
|
|
tp = space - 2048/8;
|
|
sky2_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
|
|
sky2_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
|
|
} else {
|
|
/* Enable store & forward on Tx queue's because
|
|
* Tx FIFO is only 1K on Yukon
|
|
*/
|
|
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
|
|
}
|
|
|
|
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
|
|
sky2_read8(hw, RB_ADDR(q, RB_CTRL));
|
|
}
|
|
|
|
/* Setup Bus Memory Interface */
|
|
static void sky2_qset(struct sky2_hw *hw, u16 q)
|
|
{
|
|
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_RESET);
|
|
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_OPER_INIT);
|
|
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_FIFO_OP_ON);
|
|
sky2_write32(hw, Q_ADDR(q, Q_WM), BMU_WM_DEFAULT);
|
|
}
|
|
|
|
/* Setup prefetch unit registers. This is the interface between
|
|
* hardware and driver list elements
|
|
*/
|
|
static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr,
|
|
dma_addr_t addr, u32 last)
|
|
{
|
|
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
|
|
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR);
|
|
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr));
|
|
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr));
|
|
sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last);
|
|
sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON);
|
|
|
|
sky2_read32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL));
|
|
}
|
|
|
|
static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot)
|
|
{
|
|
struct sky2_tx_le *le = sky2->tx_le + *slot;
|
|
|
|
*slot = RING_NEXT(*slot, sky2->tx_ring_size);
|
|
le->ctrl = 0;
|
|
return le;
|
|
}
|
|
|
|
static void tx_init(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_tx_le *le;
|
|
|
|
sky2->tx_prod = sky2->tx_cons = 0;
|
|
sky2->tx_tcpsum = 0;
|
|
sky2->tx_last_mss = 0;
|
|
|
|
le = get_tx_le(sky2, &sky2->tx_prod);
|
|
le->addr = 0;
|
|
le->opcode = OP_ADDR64 | HW_OWNER;
|
|
sky2->tx_last_upper = 0;
|
|
}
|
|
|
|
/* Update chip's next pointer */
|
|
static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
|
|
{
|
|
/* Make sure write' to descriptors are complete before we tell hardware */
|
|
wmb();
|
|
sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
|
|
|
|
/* Synchronize I/O on since next processor may write to tail */
|
|
mmiowb();
|
|
}
|
|
|
|
|
|
static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
|
|
sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
|
|
le->ctrl = 0;
|
|
return le;
|
|
}
|
|
|
|
static unsigned sky2_get_rx_threshold(struct sky2_port *sky2)
|
|
{
|
|
unsigned size;
|
|
|
|
/* Space needed for frame data + headers rounded up */
|
|
size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
|
|
|
|
/* Stopping point for hardware truncation */
|
|
return (size - 8) / sizeof(u32);
|
|
}
|
|
|
|
static unsigned sky2_get_rx_data_size(struct sky2_port *sky2)
|
|
{
|
|
struct rx_ring_info *re;
|
|
unsigned size;
|
|
|
|
/* Space needed for frame data + headers rounded up */
|
|
size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
|
|
|
|
sky2->rx_nfrags = size >> PAGE_SHIFT;
|
|
BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr));
|
|
|
|
/* Compute residue after pages */
|
|
size -= sky2->rx_nfrags << PAGE_SHIFT;
|
|
|
|
/* Optimize to handle small packets and headers */
|
|
if (size < copybreak)
|
|
size = copybreak;
|
|
if (size < ETH_HLEN)
|
|
size = ETH_HLEN;
|
|
|
|
return size;
|
|
}
|
|
|
|
/* Build description to hardware for one receive segment */
|
|
static void sky2_rx_add(struct sky2_port *sky2, u8 op,
|
|
dma_addr_t map, unsigned len)
|
|
{
|
|
struct sky2_rx_le *le;
|
|
|
|
if (sizeof(dma_addr_t) > sizeof(u32)) {
|
|
le = sky2_next_rx(sky2);
|
|
le->addr = cpu_to_le32(upper_32_bits(map));
|
|
le->opcode = OP_ADDR64 | HW_OWNER;
|
|
}
|
|
|
|
le = sky2_next_rx(sky2);
|
|
le->addr = cpu_to_le32(lower_32_bits(map));
|
|
le->length = cpu_to_le16(len);
|
|
le->opcode = op | HW_OWNER;
|
|
}
|
|
|
|
/* Build description to hardware for one possibly fragmented skb */
|
|
static void sky2_rx_submit(struct sky2_port *sky2,
|
|
const struct rx_ring_info *re)
|
|
{
|
|
int i;
|
|
|
|
sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size);
|
|
|
|
for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++)
|
|
sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE);
|
|
}
|
|
|
|
|
|
static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
|
|
unsigned size)
|
|
{
|
|
struct sk_buff *skb = re->skb;
|
|
int i;
|
|
|
|
re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(pdev, re->data_addr))
|
|
goto mapping_error;
|
|
|
|
dma_unmap_len_set(re, data_size, size);
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
re->frag_addr[i] = pci_map_page(pdev, frag->page,
|
|
frag->page_offset,
|
|
frag->size,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
if (pci_dma_mapping_error(pdev, re->frag_addr[i]))
|
|
goto map_page_error;
|
|
}
|
|
return 0;
|
|
|
|
map_page_error:
|
|
while (--i >= 0) {
|
|
pci_unmap_page(pdev, re->frag_addr[i],
|
|
skb_shinfo(skb)->frags[i].size,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
mapping_error:
|
|
if (net_ratelimit())
|
|
dev_warn(&pdev->dev, "%s: rx mapping error\n",
|
|
skb->dev->name);
|
|
return -EIO;
|
|
}
|
|
|
|
static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
|
|
{
|
|
struct sk_buff *skb = re->skb;
|
|
int i;
|
|
|
|
pci_unmap_single(pdev, re->data_addr, dma_unmap_len(re, data_size),
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
|
|
pci_unmap_page(pdev, re->frag_addr[i],
|
|
skb_shinfo(skb)->frags[i].size,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
/* Tell chip where to start receive checksum.
|
|
* Actually has two checksums, but set both same to avoid possible byte
|
|
* order problems.
|
|
*/
|
|
static void rx_set_checksum(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_rx_le *le = sky2_next_rx(sky2);
|
|
|
|
le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
|
|
le->ctrl = 0;
|
|
le->opcode = OP_TCPSTART | HW_OWNER;
|
|
|
|
sky2_write32(sky2->hw,
|
|
Q_ADDR(rxqaddr[sky2->port], Q_CSR),
|
|
(sky2->netdev->features & NETIF_F_RXCSUM)
|
|
? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
|
|
}
|
|
|
|
/* Enable/disable receive hash calculation (RSS) */
|
|
static void rx_set_rss(struct net_device *dev, u32 features)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
int i, nkeys = 4;
|
|
|
|
/* Supports IPv6 and other modes */
|
|
if (hw->flags & SKY2_HW_NEW_LE) {
|
|
nkeys = 10;
|
|
sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
|
|
}
|
|
|
|
/* Program RSS initial values */
|
|
if (features & NETIF_F_RXHASH) {
|
|
u32 key[nkeys];
|
|
|
|
get_random_bytes(key, nkeys * sizeof(u32));
|
|
for (i = 0; i < nkeys; i++)
|
|
sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
|
|
key[i]);
|
|
|
|
/* Need to turn on (undocumented) flag to make hashing work */
|
|
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
|
|
RX_STFW_ENA);
|
|
|
|
sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
|
|
BMU_ENA_RX_RSS_HASH);
|
|
} else
|
|
sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
|
|
BMU_DIS_RX_RSS_HASH);
|
|
}
|
|
|
|
/*
|
|
* The RX Stop command will not work for Yukon-2 if the BMU does not
|
|
* reach the end of packet and since we can't make sure that we have
|
|
* incoming data, we must reset the BMU while it is not doing a DMA
|
|
* transfer. Since it is possible that the RX path is still active,
|
|
* the RX RAM buffer will be stopped first, so any possible incoming
|
|
* data will not trigger a DMA. After the RAM buffer is stopped, the
|
|
* BMU is polled until any DMA in progress is ended and only then it
|
|
* will be reset.
|
|
*/
|
|
static void sky2_rx_stop(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned rxq = rxqaddr[sky2->port];
|
|
int i;
|
|
|
|
/* disable the RAM Buffer receive queue */
|
|
sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_DIS_OP_MD);
|
|
|
|
for (i = 0; i < 0xffff; i++)
|
|
if (sky2_read8(hw, RB_ADDR(rxq, Q_RSL))
|
|
== sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
|
|
goto stopped;
|
|
|
|
netdev_warn(sky2->netdev, "receiver stop failed\n");
|
|
stopped:
|
|
sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
|
|
|
|
/* reset the Rx prefetch unit */
|
|
sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
|
|
mmiowb();
|
|
}
|
|
|
|
/* Clean out receive buffer area, assumes receiver hardware stopped */
|
|
static void sky2_rx_clean(struct sky2_port *sky2)
|
|
{
|
|
unsigned i;
|
|
|
|
memset(sky2->rx_le, 0, RX_LE_BYTES);
|
|
for (i = 0; i < sky2->rx_pending; i++) {
|
|
struct rx_ring_info *re = sky2->rx_ring + i;
|
|
|
|
if (re->skb) {
|
|
sky2_rx_unmap_skb(sky2->hw->pdev, re);
|
|
kfree_skb(re->skb);
|
|
re->skb = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Basic MII support */
|
|
static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
int err = -EOPNOTSUPP;
|
|
|
|
if (!netif_running(dev))
|
|
return -ENODEV; /* Phy still in reset */
|
|
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
data->phy_id = PHY_ADDR_MARV;
|
|
|
|
/* fallthru */
|
|
case SIOCGMIIREG: {
|
|
u16 val = 0;
|
|
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
err = __gm_phy_read(hw, sky2->port, data->reg_num & 0x1f, &val);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
|
|
data->val_out = val;
|
|
break;
|
|
}
|
|
|
|
case SIOCSMIIREG:
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
err = gm_phy_write(hw, sky2->port, data->reg_num & 0x1f,
|
|
data->val_in);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
break;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
#define SKY2_VLAN_OFFLOADS (NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO)
|
|
|
|
static void sky2_vlan_mode(struct net_device *dev, u32 features)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
u16 port = sky2->port;
|
|
|
|
if (features & NETIF_F_HW_VLAN_RX)
|
|
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
|
|
RX_VLAN_STRIP_ON);
|
|
else
|
|
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
|
|
RX_VLAN_STRIP_OFF);
|
|
|
|
if (features & NETIF_F_HW_VLAN_TX) {
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
|
|
TX_VLAN_TAG_ON);
|
|
|
|
dev->vlan_features |= SKY2_VLAN_OFFLOADS;
|
|
} else {
|
|
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
|
|
TX_VLAN_TAG_OFF);
|
|
|
|
/* Can't do transmit offload of vlan without hw vlan */
|
|
dev->vlan_features &= ~SKY2_VLAN_OFFLOADS;
|
|
}
|
|
}
|
|
|
|
/* Amount of required worst case padding in rx buffer */
|
|
static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
|
|
{
|
|
return (hw->flags & SKY2_HW_RAM_BUFFER) ? 8 : 2;
|
|
}
|
|
|
|
/*
|
|
* Allocate an skb for receiving. If the MTU is large enough
|
|
* make the skb non-linear with a fragment list of pages.
|
|
*/
|
|
static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2)
|
|
{
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
skb = netdev_alloc_skb(sky2->netdev,
|
|
sky2->rx_data_size + sky2_rx_pad(sky2->hw));
|
|
if (!skb)
|
|
goto nomem;
|
|
|
|
if (sky2->hw->flags & SKY2_HW_RAM_BUFFER) {
|
|
unsigned char *start;
|
|
/*
|
|
* Workaround for a bug in FIFO that cause hang
|
|
* if the FIFO if the receive buffer is not 64 byte aligned.
|
|
* The buffer returned from netdev_alloc_skb is
|
|
* aligned except if slab debugging is enabled.
|
|
*/
|
|
start = PTR_ALIGN(skb->data, 8);
|
|
skb_reserve(skb, start - skb->data);
|
|
} else
|
|
skb_reserve(skb, NET_IP_ALIGN);
|
|
|
|
for (i = 0; i < sky2->rx_nfrags; i++) {
|
|
struct page *page = alloc_page(GFP_ATOMIC);
|
|
|
|
if (!page)
|
|
goto free_partial;
|
|
skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE);
|
|
}
|
|
|
|
return skb;
|
|
free_partial:
|
|
kfree_skb(skb);
|
|
nomem:
|
|
return NULL;
|
|
}
|
|
|
|
static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
|
|
{
|
|
sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
|
|
}
|
|
|
|
static int sky2_alloc_rx_skbs(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned i;
|
|
|
|
sky2->rx_data_size = sky2_get_rx_data_size(sky2);
|
|
|
|
/* Fill Rx ring */
|
|
for (i = 0; i < sky2->rx_pending; i++) {
|
|
struct rx_ring_info *re = sky2->rx_ring + i;
|
|
|
|
re->skb = sky2_rx_alloc(sky2);
|
|
if (!re->skb)
|
|
return -ENOMEM;
|
|
|
|
if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
|
|
dev_kfree_skb(re->skb);
|
|
re->skb = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Setup receiver buffer pool.
|
|
* Normal case this ends up creating one list element for skb
|
|
* in the receive ring. Worst case if using large MTU and each
|
|
* allocation falls on a different 64 bit region, that results
|
|
* in 6 list elements per ring entry.
|
|
* One element is used for checksum enable/disable, and one
|
|
* extra to avoid wrap.
|
|
*/
|
|
static void sky2_rx_start(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
struct rx_ring_info *re;
|
|
unsigned rxq = rxqaddr[sky2->port];
|
|
unsigned i, thresh;
|
|
|
|
sky2->rx_put = sky2->rx_next = 0;
|
|
sky2_qset(hw, rxq);
|
|
|
|
/* On PCI express lowering the watermark gives better performance */
|
|
if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
|
|
sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
|
|
|
|
/* These chips have no ram buffer?
|
|
* MAC Rx RAM Read is controlled by hardware */
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
|
|
hw->chip_rev > CHIP_REV_YU_EC_U_A0)
|
|
sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
|
|
|
|
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
|
|
|
|
if (!(hw->flags & SKY2_HW_NEW_LE))
|
|
rx_set_checksum(sky2);
|
|
|
|
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
|
|
rx_set_rss(sky2->netdev, sky2->netdev->features);
|
|
|
|
/* submit Rx ring */
|
|
for (i = 0; i < sky2->rx_pending; i++) {
|
|
re = sky2->rx_ring + i;
|
|
sky2_rx_submit(sky2, re);
|
|
}
|
|
|
|
/*
|
|
* The receiver hangs if it receives frames larger than the
|
|
* packet buffer. As a workaround, truncate oversize frames, but
|
|
* the register is limited to 9 bits, so if you do frames > 2052
|
|
* you better get the MTU right!
|
|
*/
|
|
thresh = sky2_get_rx_threshold(sky2);
|
|
if (thresh > 0x1ff)
|
|
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
|
|
else {
|
|
sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
|
|
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
|
|
}
|
|
|
|
/* Tell chip about available buffers */
|
|
sky2_rx_update(sky2, rxq);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_EX ||
|
|
hw->chip_id == CHIP_ID_YUKON_SUPR) {
|
|
/*
|
|
* Disable flushing of non ASF packets;
|
|
* must be done after initializing the BMUs;
|
|
* drivers without ASF support should do this too, otherwise
|
|
* it may happen that they cannot run on ASF devices;
|
|
* remember that the MAC FIFO isn't reset during initialization.
|
|
*/
|
|
sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
|
|
}
|
|
|
|
if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
|
|
/* Enable RX Home Address & Routing Header checksum fix */
|
|
sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
|
|
RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
|
|
|
|
/* Enable TX Home Address & Routing Header checksum fix */
|
|
sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
|
|
TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
|
|
}
|
|
}
|
|
|
|
static int sky2_alloc_buffers(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
/* must be power of 2 */
|
|
sky2->tx_le = pci_alloc_consistent(hw->pdev,
|
|
sky2->tx_ring_size *
|
|
sizeof(struct sky2_tx_le),
|
|
&sky2->tx_le_map);
|
|
if (!sky2->tx_le)
|
|
goto nomem;
|
|
|
|
sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info),
|
|
GFP_KERNEL);
|
|
if (!sky2->tx_ring)
|
|
goto nomem;
|
|
|
|
sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES,
|
|
&sky2->rx_le_map);
|
|
if (!sky2->rx_le)
|
|
goto nomem;
|
|
memset(sky2->rx_le, 0, RX_LE_BYTES);
|
|
|
|
sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info),
|
|
GFP_KERNEL);
|
|
if (!sky2->rx_ring)
|
|
goto nomem;
|
|
|
|
return sky2_alloc_rx_skbs(sky2);
|
|
nomem:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void sky2_free_buffers(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
sky2_rx_clean(sky2);
|
|
|
|
if (sky2->rx_le) {
|
|
pci_free_consistent(hw->pdev, RX_LE_BYTES,
|
|
sky2->rx_le, sky2->rx_le_map);
|
|
sky2->rx_le = NULL;
|
|
}
|
|
if (sky2->tx_le) {
|
|
pci_free_consistent(hw->pdev,
|
|
sky2->tx_ring_size * sizeof(struct sky2_tx_le),
|
|
sky2->tx_le, sky2->tx_le_map);
|
|
sky2->tx_le = NULL;
|
|
}
|
|
kfree(sky2->tx_ring);
|
|
kfree(sky2->rx_ring);
|
|
|
|
sky2->tx_ring = NULL;
|
|
sky2->rx_ring = NULL;
|
|
}
|
|
|
|
static void sky2_hw_up(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u32 ramsize;
|
|
int cap;
|
|
struct net_device *otherdev = hw->dev[sky2->port^1];
|
|
|
|
tx_init(sky2);
|
|
|
|
/*
|
|
* On dual port PCI-X card, there is an problem where status
|
|
* can be received out of order due to split transactions
|
|
*/
|
|
if (otherdev && netif_running(otherdev) &&
|
|
(cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
|
|
u16 cmd;
|
|
|
|
cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
|
|
cmd &= ~PCI_X_CMD_MAX_SPLIT;
|
|
sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
|
|
}
|
|
|
|
sky2_mac_init(hw, port);
|
|
|
|
/* Register is number of 4K blocks on internal RAM buffer. */
|
|
ramsize = sky2_read8(hw, B2_E_0) * 4;
|
|
if (ramsize > 0) {
|
|
u32 rxspace;
|
|
|
|
netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
|
|
if (ramsize < 16)
|
|
rxspace = ramsize / 2;
|
|
else
|
|
rxspace = 8 + (2*(ramsize - 16))/3;
|
|
|
|
sky2_ramset(hw, rxqaddr[port], 0, rxspace);
|
|
sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
|
|
|
|
/* Make sure SyncQ is disabled */
|
|
sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
|
|
RB_RST_SET);
|
|
}
|
|
|
|
sky2_qset(hw, txqaddr[port]);
|
|
|
|
/* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
|
|
if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
|
|
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
|
|
|
|
/* Set almost empty threshold */
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
|
|
hw->chip_rev == CHIP_REV_YU_EC_U_A0)
|
|
sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
|
|
|
|
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
|
|
sky2->tx_ring_size - 1);
|
|
|
|
sky2_vlan_mode(sky2->netdev, sky2->netdev->features);
|
|
netdev_update_features(sky2->netdev);
|
|
|
|
sky2_rx_start(sky2);
|
|
}
|
|
|
|
/* Bring up network interface. */
|
|
static int sky2_up(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u32 imask;
|
|
int err;
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
err = sky2_alloc_buffers(sky2);
|
|
if (err)
|
|
goto err_out;
|
|
|
|
sky2_hw_up(sky2);
|
|
|
|
/* Enable interrupts from phy/mac for port */
|
|
imask = sky2_read32(hw, B0_IMSK);
|
|
imask |= portirq_msk[port];
|
|
sky2_write32(hw, B0_IMSK, imask);
|
|
sky2_read32(hw, B0_IMSK);
|
|
|
|
netif_info(sky2, ifup, dev, "enabling interface\n");
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
sky2_free_buffers(sky2);
|
|
return err;
|
|
}
|
|
|
|
/* Modular subtraction in ring */
|
|
static inline int tx_inuse(const struct sky2_port *sky2)
|
|
{
|
|
return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1);
|
|
}
|
|
|
|
/* Number of list elements available for next tx */
|
|
static inline int tx_avail(const struct sky2_port *sky2)
|
|
{
|
|
return sky2->tx_pending - tx_inuse(sky2);
|
|
}
|
|
|
|
/* Estimate of number of transmit list elements required */
|
|
static unsigned tx_le_req(const struct sk_buff *skb)
|
|
{
|
|
unsigned count;
|
|
|
|
count = (skb_shinfo(skb)->nr_frags + 1)
|
|
* (sizeof(dma_addr_t) / sizeof(u32));
|
|
|
|
if (skb_is_gso(skb))
|
|
++count;
|
|
else if (sizeof(dma_addr_t) == sizeof(u32))
|
|
++count; /* possible vlan */
|
|
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL)
|
|
++count;
|
|
|
|
return count;
|
|
}
|
|
|
|
static void sky2_tx_unmap(struct pci_dev *pdev, struct tx_ring_info *re)
|
|
{
|
|
if (re->flags & TX_MAP_SINGLE)
|
|
pci_unmap_single(pdev, dma_unmap_addr(re, mapaddr),
|
|
dma_unmap_len(re, maplen),
|
|
PCI_DMA_TODEVICE);
|
|
else if (re->flags & TX_MAP_PAGE)
|
|
pci_unmap_page(pdev, dma_unmap_addr(re, mapaddr),
|
|
dma_unmap_len(re, maplen),
|
|
PCI_DMA_TODEVICE);
|
|
re->flags = 0;
|
|
}
|
|
|
|
/*
|
|
* Put one packet in ring for transmit.
|
|
* A single packet can generate multiple list elements, and
|
|
* the number of ring elements will probably be less than the number
|
|
* of list elements used.
|
|
*/
|
|
static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
struct sky2_tx_le *le = NULL;
|
|
struct tx_ring_info *re;
|
|
unsigned i, len;
|
|
dma_addr_t mapping;
|
|
u32 upper;
|
|
u16 slot;
|
|
u16 mss;
|
|
u8 ctrl;
|
|
|
|
if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
|
|
return NETDEV_TX_BUSY;
|
|
|
|
len = skb_headlen(skb);
|
|
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
|
|
if (pci_dma_mapping_error(hw->pdev, mapping))
|
|
goto mapping_error;
|
|
|
|
slot = sky2->tx_prod;
|
|
netif_printk(sky2, tx_queued, KERN_DEBUG, dev,
|
|
"tx queued, slot %u, len %d\n", slot, skb->len);
|
|
|
|
/* Send high bits if needed */
|
|
upper = upper_32_bits(mapping);
|
|
if (upper != sky2->tx_last_upper) {
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(upper);
|
|
sky2->tx_last_upper = upper;
|
|
le->opcode = OP_ADDR64 | HW_OWNER;
|
|
}
|
|
|
|
/* Check for TCP Segmentation Offload */
|
|
mss = skb_shinfo(skb)->gso_size;
|
|
if (mss != 0) {
|
|
|
|
if (!(hw->flags & SKY2_HW_NEW_LE))
|
|
mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
|
|
|
|
if (mss != sky2->tx_last_mss) {
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(mss);
|
|
|
|
if (hw->flags & SKY2_HW_NEW_LE)
|
|
le->opcode = OP_MSS | HW_OWNER;
|
|
else
|
|
le->opcode = OP_LRGLEN | HW_OWNER;
|
|
sky2->tx_last_mss = mss;
|
|
}
|
|
}
|
|
|
|
ctrl = 0;
|
|
|
|
/* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
|
|
if (vlan_tx_tag_present(skb)) {
|
|
if (!le) {
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = 0;
|
|
le->opcode = OP_VLAN|HW_OWNER;
|
|
} else
|
|
le->opcode |= OP_VLAN;
|
|
le->length = cpu_to_be16(vlan_tx_tag_get(skb));
|
|
ctrl |= INS_VLAN;
|
|
}
|
|
|
|
/* Handle TCP checksum offload */
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
/* On Yukon EX (some versions) encoding change. */
|
|
if (hw->flags & SKY2_HW_AUTO_TX_SUM)
|
|
ctrl |= CALSUM; /* auto checksum */
|
|
else {
|
|
const unsigned offset = skb_transport_offset(skb);
|
|
u32 tcpsum;
|
|
|
|
tcpsum = offset << 16; /* sum start */
|
|
tcpsum |= offset + skb->csum_offset; /* sum write */
|
|
|
|
ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
|
|
if (ip_hdr(skb)->protocol == IPPROTO_UDP)
|
|
ctrl |= UDPTCP;
|
|
|
|
if (tcpsum != sky2->tx_tcpsum) {
|
|
sky2->tx_tcpsum = tcpsum;
|
|
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(tcpsum);
|
|
le->length = 0; /* initial checksum value */
|
|
le->ctrl = 1; /* one packet */
|
|
le->opcode = OP_TCPLISW | HW_OWNER;
|
|
}
|
|
}
|
|
}
|
|
|
|
re = sky2->tx_ring + slot;
|
|
re->flags = TX_MAP_SINGLE;
|
|
dma_unmap_addr_set(re, mapaddr, mapping);
|
|
dma_unmap_len_set(re, maplen, len);
|
|
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(lower_32_bits(mapping));
|
|
le->length = cpu_to_le16(len);
|
|
le->ctrl = ctrl;
|
|
le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER);
|
|
|
|
|
|
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
|
|
frag->size, PCI_DMA_TODEVICE);
|
|
|
|
if (pci_dma_mapping_error(hw->pdev, mapping))
|
|
goto mapping_unwind;
|
|
|
|
upper = upper_32_bits(mapping);
|
|
if (upper != sky2->tx_last_upper) {
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(upper);
|
|
sky2->tx_last_upper = upper;
|
|
le->opcode = OP_ADDR64 | HW_OWNER;
|
|
}
|
|
|
|
re = sky2->tx_ring + slot;
|
|
re->flags = TX_MAP_PAGE;
|
|
dma_unmap_addr_set(re, mapaddr, mapping);
|
|
dma_unmap_len_set(re, maplen, frag->size);
|
|
|
|
le = get_tx_le(sky2, &slot);
|
|
le->addr = cpu_to_le32(lower_32_bits(mapping));
|
|
le->length = cpu_to_le16(frag->size);
|
|
le->ctrl = ctrl;
|
|
le->opcode = OP_BUFFER | HW_OWNER;
|
|
}
|
|
|
|
re->skb = skb;
|
|
le->ctrl |= EOP;
|
|
|
|
sky2->tx_prod = slot;
|
|
|
|
if (tx_avail(sky2) <= MAX_SKB_TX_LE)
|
|
netif_stop_queue(dev);
|
|
|
|
sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
mapping_unwind:
|
|
for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) {
|
|
re = sky2->tx_ring + i;
|
|
|
|
sky2_tx_unmap(hw->pdev, re);
|
|
}
|
|
|
|
mapping_error:
|
|
if (net_ratelimit())
|
|
dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
|
|
dev_kfree_skb(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* Free ring elements from starting at tx_cons until "done"
|
|
*
|
|
* NB:
|
|
* 1. The hardware will tell us about partial completion of multi-part
|
|
* buffers so make sure not to free skb to early.
|
|
* 2. This may run in parallel start_xmit because the it only
|
|
* looks at the tail of the queue of FIFO (tx_cons), not
|
|
* the head (tx_prod)
|
|
*/
|
|
static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
|
|
{
|
|
struct net_device *dev = sky2->netdev;
|
|
unsigned idx;
|
|
|
|
BUG_ON(done >= sky2->tx_ring_size);
|
|
|
|
for (idx = sky2->tx_cons; idx != done;
|
|
idx = RING_NEXT(idx, sky2->tx_ring_size)) {
|
|
struct tx_ring_info *re = sky2->tx_ring + idx;
|
|
struct sk_buff *skb = re->skb;
|
|
|
|
sky2_tx_unmap(sky2->hw->pdev, re);
|
|
|
|
if (skb) {
|
|
netif_printk(sky2, tx_done, KERN_DEBUG, dev,
|
|
"tx done %u\n", idx);
|
|
|
|
u64_stats_update_begin(&sky2->tx_stats.syncp);
|
|
++sky2->tx_stats.packets;
|
|
sky2->tx_stats.bytes += skb->len;
|
|
u64_stats_update_end(&sky2->tx_stats.syncp);
|
|
|
|
re->skb = NULL;
|
|
dev_kfree_skb_any(skb);
|
|
|
|
sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size);
|
|
}
|
|
}
|
|
|
|
sky2->tx_cons = idx;
|
|
smp_mb();
|
|
}
|
|
|
|
static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
/* Disable Force Sync bit and Enable Alloc bit */
|
|
sky2_write8(hw, SK_REG(port, TXA_CTRL),
|
|
TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
|
|
|
|
/* Stop Interval Timer and Limit Counter of Tx Arbiter */
|
|
sky2_write32(hw, SK_REG(port, TXA_ITI_INI), 0L);
|
|
sky2_write32(hw, SK_REG(port, TXA_LIM_INI), 0L);
|
|
|
|
/* Reset the PCI FIFO of the async Tx queue */
|
|
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR),
|
|
BMU_RST_SET | BMU_FIFO_RST);
|
|
|
|
/* Reset the Tx prefetch units */
|
|
sky2_write32(hw, Y2_QADDR(txqaddr[port], PREF_UNIT_CTRL),
|
|
PREF_UNIT_RST_SET);
|
|
|
|
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
|
|
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
|
|
}
|
|
|
|
static void sky2_hw_down(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u16 ctrl;
|
|
|
|
/* Force flow control off */
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
|
|
|
|
/* Stop transmitter */
|
|
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_STOP);
|
|
sky2_read32(hw, Q_ADDR(txqaddr[port], Q_CSR));
|
|
|
|
sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
|
|
RB_RST_SET | RB_DIS_OP_MD);
|
|
|
|
ctrl = gma_read16(hw, port, GM_GP_CTRL);
|
|
ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA);
|
|
gma_write16(hw, port, GM_GP_CTRL, ctrl);
|
|
|
|
sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
|
|
|
|
/* Workaround shared GMAC reset */
|
|
if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
|
|
port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
|
|
|
|
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
|
|
|
|
/* Force any delayed status interrrupt and NAPI */
|
|
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
|
|
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
|
|
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
|
|
sky2_read8(hw, STAT_ISR_TIMER_CTRL);
|
|
|
|
sky2_rx_stop(sky2);
|
|
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
sky2_phy_power_down(hw, port);
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
|
|
sky2_tx_reset(hw, port);
|
|
|
|
/* Free any pending frames stuck in HW queue */
|
|
sky2_tx_complete(sky2, sky2->tx_prod);
|
|
}
|
|
|
|
/* Network shutdown */
|
|
static int sky2_down(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
/* Never really got started! */
|
|
if (!sky2->tx_le)
|
|
return 0;
|
|
|
|
netif_info(sky2, ifdown, dev, "disabling interface\n");
|
|
|
|
/* Disable port IRQ */
|
|
sky2_write32(hw, B0_IMSK,
|
|
sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
|
|
sky2_read32(hw, B0_IMSK);
|
|
|
|
synchronize_irq(hw->pdev->irq);
|
|
napi_synchronize(&hw->napi);
|
|
|
|
sky2_hw_down(sky2);
|
|
|
|
sky2_free_buffers(sky2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux)
|
|
{
|
|
if (hw->flags & SKY2_HW_FIBRE_PHY)
|
|
return SPEED_1000;
|
|
|
|
if (!(hw->flags & SKY2_HW_GIGABIT)) {
|
|
if (aux & PHY_M_PS_SPEED_100)
|
|
return SPEED_100;
|
|
else
|
|
return SPEED_10;
|
|
}
|
|
|
|
switch (aux & PHY_M_PS_SPEED_MSK) {
|
|
case PHY_M_PS_SPEED_1000:
|
|
return SPEED_1000;
|
|
case PHY_M_PS_SPEED_100:
|
|
return SPEED_100;
|
|
default:
|
|
return SPEED_10;
|
|
}
|
|
}
|
|
|
|
static void sky2_link_up(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
static const char *fc_name[] = {
|
|
[FC_NONE] = "none",
|
|
[FC_TX] = "tx",
|
|
[FC_RX] = "rx",
|
|
[FC_BOTH] = "both",
|
|
};
|
|
|
|
sky2_enable_rx_tx(sky2);
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
|
|
|
|
netif_carrier_on(sky2->netdev);
|
|
|
|
mod_timer(&hw->watchdog_timer, jiffies + 1);
|
|
|
|
/* Turn on link LED */
|
|
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
|
|
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
|
|
|
|
netif_info(sky2, link, sky2->netdev,
|
|
"Link is up at %d Mbps, %s duplex, flow control %s\n",
|
|
sky2->speed,
|
|
sky2->duplex == DUPLEX_FULL ? "full" : "half",
|
|
fc_name[sky2->flow_status]);
|
|
}
|
|
|
|
static void sky2_link_down(struct sky2_port *sky2)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u16 reg;
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
|
|
|
|
reg = gma_read16(hw, port, GM_GP_CTRL);
|
|
reg &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
|
|
gma_write16(hw, port, GM_GP_CTRL, reg);
|
|
|
|
netif_carrier_off(sky2->netdev);
|
|
|
|
/* Turn off link LED */
|
|
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
|
|
|
|
netif_info(sky2, link, sky2->netdev, "Link is down\n");
|
|
|
|
sky2_phy_init(hw, port);
|
|
}
|
|
|
|
static enum flow_control sky2_flow(int rx, int tx)
|
|
{
|
|
if (rx)
|
|
return tx ? FC_BOTH : FC_RX;
|
|
else
|
|
return tx ? FC_TX : FC_NONE;
|
|
}
|
|
|
|
static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
u16 advert, lpa;
|
|
|
|
advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
|
|
lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
|
|
if (lpa & PHY_M_AN_RF) {
|
|
netdev_err(sky2->netdev, "remote fault\n");
|
|
return -1;
|
|
}
|
|
|
|
if (!(aux & PHY_M_PS_SPDUP_RES)) {
|
|
netdev_err(sky2->netdev, "speed/duplex mismatch\n");
|
|
return -1;
|
|
}
|
|
|
|
sky2->speed = sky2_phy_speed(hw, aux);
|
|
sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
/* Since the pause result bits seem to in different positions on
|
|
* different chips. look at registers.
|
|
*/
|
|
if (hw->flags & SKY2_HW_FIBRE_PHY) {
|
|
/* Shift for bits in fiber PHY */
|
|
advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM);
|
|
lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM);
|
|
|
|
if (advert & ADVERTISE_1000XPAUSE)
|
|
advert |= ADVERTISE_PAUSE_CAP;
|
|
if (advert & ADVERTISE_1000XPSE_ASYM)
|
|
advert |= ADVERTISE_PAUSE_ASYM;
|
|
if (lpa & LPA_1000XPAUSE)
|
|
lpa |= LPA_PAUSE_CAP;
|
|
if (lpa & LPA_1000XPAUSE_ASYM)
|
|
lpa |= LPA_PAUSE_ASYM;
|
|
}
|
|
|
|
sky2->flow_status = FC_NONE;
|
|
if (advert & ADVERTISE_PAUSE_CAP) {
|
|
if (lpa & LPA_PAUSE_CAP)
|
|
sky2->flow_status = FC_BOTH;
|
|
else if (advert & ADVERTISE_PAUSE_ASYM)
|
|
sky2->flow_status = FC_RX;
|
|
} else if (advert & ADVERTISE_PAUSE_ASYM) {
|
|
if ((lpa & LPA_PAUSE_CAP) && (lpa & LPA_PAUSE_ASYM))
|
|
sky2->flow_status = FC_TX;
|
|
}
|
|
|
|
if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
|
|
!(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
|
|
sky2->flow_status = FC_NONE;
|
|
|
|
if (sky2->flow_status & FC_TX)
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON);
|
|
else
|
|
sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Interrupt from PHY */
|
|
static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
u16 istatus, phystat;
|
|
|
|
if (!netif_running(dev))
|
|
return;
|
|
|
|
spin_lock(&sky2->phy_lock);
|
|
istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT);
|
|
phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT);
|
|
|
|
netif_info(sky2, intr, sky2->netdev, "phy interrupt status 0x%x 0x%x\n",
|
|
istatus, phystat);
|
|
|
|
if (istatus & PHY_M_IS_AN_COMPL) {
|
|
if (sky2_autoneg_done(sky2, phystat) == 0 &&
|
|
!netif_carrier_ok(dev))
|
|
sky2_link_up(sky2);
|
|
goto out;
|
|
}
|
|
|
|
if (istatus & PHY_M_IS_LSP_CHANGE)
|
|
sky2->speed = sky2_phy_speed(hw, phystat);
|
|
|
|
if (istatus & PHY_M_IS_DUP_CHANGE)
|
|
sky2->duplex =
|
|
(phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
if (istatus & PHY_M_IS_LST_CHANGE) {
|
|
if (phystat & PHY_M_PS_LINK_UP)
|
|
sky2_link_up(sky2);
|
|
else
|
|
sky2_link_down(sky2);
|
|
}
|
|
out:
|
|
spin_unlock(&sky2->phy_lock);
|
|
}
|
|
|
|
/* Special quick link interrupt (Yukon-2 Optima only) */
|
|
static void sky2_qlink_intr(struct sky2_hw *hw)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
|
|
u32 imask;
|
|
u16 phy;
|
|
|
|
/* disable irq */
|
|
imask = sky2_read32(hw, B0_IMSK);
|
|
imask &= ~Y2_IS_PHY_QLNK;
|
|
sky2_write32(hw, B0_IMSK, imask);
|
|
|
|
/* reset PHY Link Detect */
|
|
phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
|
|
sky2_link_up(sky2);
|
|
}
|
|
|
|
/* Transmit timeout is only called if we are running, carrier is up
|
|
* and tx queue is full (stopped).
|
|
*/
|
|
static void sky2_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
netif_err(sky2, timer, dev, "tx timeout\n");
|
|
|
|
netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
|
|
sky2->tx_cons, sky2->tx_prod,
|
|
sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
|
|
sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
|
|
|
|
/* can't restart safely under softirq */
|
|
schedule_work(&hw->restart_work);
|
|
}
|
|
|
|
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
int err;
|
|
u16 ctl, mode;
|
|
u32 imask;
|
|
|
|
/* MTU size outside the spec */
|
|
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
|
|
return -EINVAL;
|
|
|
|
/* MTU > 1500 on yukon FE and FE+ not allowed */
|
|
if (new_mtu > ETH_DATA_LEN &&
|
|
(hw->chip_id == CHIP_ID_YUKON_FE ||
|
|
hw->chip_id == CHIP_ID_YUKON_FE_P))
|
|
return -EINVAL;
|
|
|
|
if (!netif_running(dev)) {
|
|
dev->mtu = new_mtu;
|
|
netdev_update_features(dev);
|
|
return 0;
|
|
}
|
|
|
|
imask = sky2_read32(hw, B0_IMSK);
|
|
sky2_write32(hw, B0_IMSK, 0);
|
|
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
napi_disable(&hw->napi);
|
|
netif_tx_disable(dev);
|
|
|
|
synchronize_irq(hw->pdev->irq);
|
|
|
|
if (!(hw->flags & SKY2_HW_RAM_BUFFER))
|
|
sky2_set_tx_stfwd(hw, port);
|
|
|
|
ctl = gma_read16(hw, port, GM_GP_CTRL);
|
|
gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
|
|
sky2_rx_stop(sky2);
|
|
sky2_rx_clean(sky2);
|
|
|
|
dev->mtu = new_mtu;
|
|
netdev_update_features(dev);
|
|
|
|
mode = DATA_BLIND_VAL(DATA_BLIND_DEF) |
|
|
GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF);
|
|
|
|
if (dev->mtu > ETH_DATA_LEN)
|
|
mode |= GM_SMOD_JUMBO_ENA;
|
|
|
|
gma_write16(hw, port, GM_SERIAL_MODE, mode);
|
|
|
|
sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD);
|
|
|
|
err = sky2_alloc_rx_skbs(sky2);
|
|
if (!err)
|
|
sky2_rx_start(sky2);
|
|
else
|
|
sky2_rx_clean(sky2);
|
|
sky2_write32(hw, B0_IMSK, imask);
|
|
|
|
sky2_read32(hw, B0_Y2_SP_LISR);
|
|
napi_enable(&hw->napi);
|
|
|
|
if (err)
|
|
dev_close(dev);
|
|
else {
|
|
gma_write16(hw, port, GM_GP_CTRL, ctl);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* For small just reuse existing skb for next receive */
|
|
static struct sk_buff *receive_copy(struct sky2_port *sky2,
|
|
const struct rx_ring_info *re,
|
|
unsigned length)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
|
|
if (likely(skb)) {
|
|
pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
|
|
length, PCI_DMA_FROMDEVICE);
|
|
skb_copy_from_linear_data(re->skb, skb->data, length);
|
|
skb->ip_summed = re->skb->ip_summed;
|
|
skb->csum = re->skb->csum;
|
|
pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr,
|
|
length, PCI_DMA_FROMDEVICE);
|
|
re->skb->ip_summed = CHECKSUM_NONE;
|
|
skb_put(skb, length);
|
|
}
|
|
return skb;
|
|
}
|
|
|
|
/* Adjust length of skb with fragments to match received data */
|
|
static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space,
|
|
unsigned int length)
|
|
{
|
|
int i, num_frags;
|
|
unsigned int size;
|
|
|
|
/* put header into skb */
|
|
size = min(length, hdr_space);
|
|
skb->tail += size;
|
|
skb->len += size;
|
|
length -= size;
|
|
|
|
num_frags = skb_shinfo(skb)->nr_frags;
|
|
for (i = 0; i < num_frags; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
if (length == 0) {
|
|
/* don't need this page */
|
|
__free_page(frag->page);
|
|
--skb_shinfo(skb)->nr_frags;
|
|
} else {
|
|
size = min(length, (unsigned) PAGE_SIZE);
|
|
|
|
frag->size = size;
|
|
skb->data_len += size;
|
|
skb->truesize += size;
|
|
skb->len += size;
|
|
length -= size;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Normal packet - take skb from ring element and put in a new one */
|
|
static struct sk_buff *receive_new(struct sky2_port *sky2,
|
|
struct rx_ring_info *re,
|
|
unsigned int length)
|
|
{
|
|
struct sk_buff *skb;
|
|
struct rx_ring_info nre;
|
|
unsigned hdr_space = sky2->rx_data_size;
|
|
|
|
nre.skb = sky2_rx_alloc(sky2);
|
|
if (unlikely(!nre.skb))
|
|
goto nobuf;
|
|
|
|
if (sky2_rx_map_skb(sky2->hw->pdev, &nre, hdr_space))
|
|
goto nomap;
|
|
|
|
skb = re->skb;
|
|
sky2_rx_unmap_skb(sky2->hw->pdev, re);
|
|
prefetch(skb->data);
|
|
*re = nre;
|
|
|
|
if (skb_shinfo(skb)->nr_frags)
|
|
skb_put_frags(skb, hdr_space, length);
|
|
else
|
|
skb_put(skb, length);
|
|
return skb;
|
|
|
|
nomap:
|
|
dev_kfree_skb(nre.skb);
|
|
nobuf:
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Receive one packet.
|
|
* For larger packets, get new buffer.
|
|
*/
|
|
static struct sk_buff *sky2_receive(struct net_device *dev,
|
|
u16 length, u32 status)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next;
|
|
struct sk_buff *skb = NULL;
|
|
u16 count = (status & GMR_FS_LEN) >> 16;
|
|
|
|
if (status & GMR_FS_VLAN)
|
|
count -= VLAN_HLEN; /* Account for vlan tag */
|
|
|
|
netif_printk(sky2, rx_status, KERN_DEBUG, dev,
|
|
"rx slot %u status 0x%x len %d\n",
|
|
sky2->rx_next, status, length);
|
|
|
|
sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending;
|
|
prefetch(sky2->rx_ring + sky2->rx_next);
|
|
|
|
/* This chip has hardware problems that generates bogus status.
|
|
* So do only marginal checking and expect higher level protocols
|
|
* to handle crap frames.
|
|
*/
|
|
if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
|
|
sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 &&
|
|
length != count)
|
|
goto okay;
|
|
|
|
if (status & GMR_FS_ANY_ERR)
|
|
goto error;
|
|
|
|
if (!(status & GMR_FS_RX_OK))
|
|
goto resubmit;
|
|
|
|
/* if length reported by DMA does not match PHY, packet was truncated */
|
|
if (length != count)
|
|
goto error;
|
|
|
|
okay:
|
|
if (length < copybreak)
|
|
skb = receive_copy(sky2, re, length);
|
|
else
|
|
skb = receive_new(sky2, re, length);
|
|
|
|
dev->stats.rx_dropped += (skb == NULL);
|
|
|
|
resubmit:
|
|
sky2_rx_submit(sky2, re);
|
|
|
|
return skb;
|
|
|
|
error:
|
|
++dev->stats.rx_errors;
|
|
|
|
if (net_ratelimit())
|
|
netif_info(sky2, rx_err, dev,
|
|
"rx error, status 0x%x length %d\n", status, length);
|
|
|
|
goto resubmit;
|
|
}
|
|
|
|
/* Transmit complete */
|
|
static inline void sky2_tx_done(struct net_device *dev, u16 last)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (netif_running(dev)) {
|
|
sky2_tx_complete(sky2, last);
|
|
|
|
/* Wake unless it's detached, and called e.g. from sky2_down() */
|
|
if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
|
|
netif_wake_queue(dev);
|
|
}
|
|
}
|
|
|
|
static inline void sky2_skb_rx(const struct sky2_port *sky2,
|
|
u32 status, struct sk_buff *skb)
|
|
{
|
|
if (status & GMR_FS_VLAN)
|
|
__vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag));
|
|
|
|
if (skb->ip_summed == CHECKSUM_NONE)
|
|
netif_receive_skb(skb);
|
|
else
|
|
napi_gro_receive(&sky2->hw->napi, skb);
|
|
}
|
|
|
|
static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
|
|
unsigned packets, unsigned bytes)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (packets == 0)
|
|
return;
|
|
|
|
u64_stats_update_begin(&sky2->rx_stats.syncp);
|
|
sky2->rx_stats.packets += packets;
|
|
sky2->rx_stats.bytes += bytes;
|
|
u64_stats_update_end(&sky2->rx_stats.syncp);
|
|
|
|
dev->last_rx = jiffies;
|
|
sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
|
|
}
|
|
|
|
static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
|
|
{
|
|
/* If this happens then driver assuming wrong format for chip type */
|
|
BUG_ON(sky2->hw->flags & SKY2_HW_NEW_LE);
|
|
|
|
/* Both checksum counters are programmed to start at
|
|
* the same offset, so unless there is a problem they
|
|
* should match. This failure is an early indication that
|
|
* hardware receive checksumming won't work.
|
|
*/
|
|
if (likely((u16)(status >> 16) == (u16)status)) {
|
|
struct sk_buff *skb = sky2->rx_ring[sky2->rx_next].skb;
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
skb->csum = le16_to_cpu(status);
|
|
} else {
|
|
dev_notice(&sky2->hw->pdev->dev,
|
|
"%s: receive checksum problem (status = %#x)\n",
|
|
sky2->netdev->name, status);
|
|
|
|
/* Disable checksum offload
|
|
* It will be reenabled on next ndo_set_features, but if it's
|
|
* really broken, will get disabled again
|
|
*/
|
|
sky2->netdev->features &= ~NETIF_F_RXCSUM;
|
|
sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
|
|
BMU_DIS_RX_CHKSUM);
|
|
}
|
|
}
|
|
|
|
static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
|
|
{
|
|
struct sk_buff *skb;
|
|
|
|
skb = sky2->rx_ring[sky2->rx_next].skb;
|
|
skb->rxhash = le32_to_cpu(status);
|
|
}
|
|
|
|
/* Process status response ring */
|
|
static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
|
|
{
|
|
int work_done = 0;
|
|
unsigned int total_bytes[2] = { 0 };
|
|
unsigned int total_packets[2] = { 0 };
|
|
|
|
rmb();
|
|
do {
|
|
struct sky2_port *sky2;
|
|
struct sky2_status_le *le = hw->st_le + hw->st_idx;
|
|
unsigned port;
|
|
struct net_device *dev;
|
|
struct sk_buff *skb;
|
|
u32 status;
|
|
u16 length;
|
|
u8 opcode = le->opcode;
|
|
|
|
if (!(opcode & HW_OWNER))
|
|
break;
|
|
|
|
hw->st_idx = RING_NEXT(hw->st_idx, hw->st_size);
|
|
|
|
port = le->css & CSS_LINK_BIT;
|
|
dev = hw->dev[port];
|
|
sky2 = netdev_priv(dev);
|
|
length = le16_to_cpu(le->length);
|
|
status = le32_to_cpu(le->status);
|
|
|
|
le->opcode = 0;
|
|
switch (opcode & ~HW_OWNER) {
|
|
case OP_RXSTAT:
|
|
total_packets[port]++;
|
|
total_bytes[port] += length;
|
|
|
|
skb = sky2_receive(dev, length, status);
|
|
if (!skb)
|
|
break;
|
|
|
|
/* This chip reports checksum status differently */
|
|
if (hw->flags & SKY2_HW_NEW_LE) {
|
|
if ((dev->features & NETIF_F_RXCSUM) &&
|
|
(le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
|
|
(le->css & CSS_TCPUDPCSOK))
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
else
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
sky2_skb_rx(sky2, status, skb);
|
|
|
|
/* Stop after net poll weight */
|
|
if (++work_done >= to_do)
|
|
goto exit_loop;
|
|
break;
|
|
|
|
case OP_RXVLAN:
|
|
sky2->rx_tag = length;
|
|
break;
|
|
|
|
case OP_RXCHKSVLAN:
|
|
sky2->rx_tag = length;
|
|
/* fall through */
|
|
case OP_RXCHKS:
|
|
if (likely(dev->features & NETIF_F_RXCSUM))
|
|
sky2_rx_checksum(sky2, status);
|
|
break;
|
|
|
|
case OP_RSS_HASH:
|
|
sky2_rx_hash(sky2, status);
|
|
break;
|
|
|
|
case OP_TXINDEXLE:
|
|
/* TX index reports status for both ports */
|
|
sky2_tx_done(hw->dev[0], status & 0xfff);
|
|
if (hw->dev[1])
|
|
sky2_tx_done(hw->dev[1],
|
|
((status >> 24) & 0xff)
|
|
| (u16)(length & 0xf) << 8);
|
|
break;
|
|
|
|
default:
|
|
if (net_ratelimit())
|
|
pr_warning("unknown status opcode 0x%x\n", opcode);
|
|
}
|
|
} while (hw->st_idx != idx);
|
|
|
|
/* Fully processed status ring so clear irq */
|
|
sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
|
|
|
|
exit_loop:
|
|
sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
|
|
sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
|
|
if (net_ratelimit())
|
|
netdev_info(dev, "hw error interrupt status 0x%x\n", status);
|
|
|
|
if (status & Y2_IS_PAR_RD1) {
|
|
if (net_ratelimit())
|
|
netdev_err(dev, "ram data read parity error\n");
|
|
/* Clear IRQ */
|
|
sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
|
|
}
|
|
|
|
if (status & Y2_IS_PAR_WR1) {
|
|
if (net_ratelimit())
|
|
netdev_err(dev, "ram data write parity error\n");
|
|
|
|
sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
|
|
}
|
|
|
|
if (status & Y2_IS_PAR_MAC1) {
|
|
if (net_ratelimit())
|
|
netdev_err(dev, "MAC parity error\n");
|
|
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
|
|
}
|
|
|
|
if (status & Y2_IS_PAR_RX1) {
|
|
if (net_ratelimit())
|
|
netdev_err(dev, "RX parity error\n");
|
|
sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
|
|
}
|
|
|
|
if (status & Y2_IS_TCP_TXA1) {
|
|
if (net_ratelimit())
|
|
netdev_err(dev, "TCP segmentation error\n");
|
|
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
|
|
}
|
|
}
|
|
|
|
static void sky2_hw_intr(struct sky2_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->pdev;
|
|
u32 status = sky2_read32(hw, B0_HWE_ISRC);
|
|
u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
|
|
|
|
status &= hwmsk;
|
|
|
|
if (status & Y2_IS_TIST_OV)
|
|
sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
|
|
|
|
if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
|
|
u16 pci_err;
|
|
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
pci_err = sky2_pci_read16(hw, PCI_STATUS);
|
|
if (net_ratelimit())
|
|
dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
|
|
pci_err);
|
|
|
|
sky2_pci_write16(hw, PCI_STATUS,
|
|
pci_err | PCI_STATUS_ERROR_BITS);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
}
|
|
|
|
if (status & Y2_IS_PCI_EXP) {
|
|
/* PCI-Express uncorrectable Error occurred */
|
|
u32 err;
|
|
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
|
|
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
|
|
0xfffffffful);
|
|
if (net_ratelimit())
|
|
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
|
|
|
|
sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
}
|
|
|
|
if (status & Y2_HWE_L1_MASK)
|
|
sky2_hw_error(hw, 0, status);
|
|
status >>= 8;
|
|
if (status & Y2_HWE_L1_MASK)
|
|
sky2_hw_error(hw, 1, status);
|
|
}
|
|
|
|
static void sky2_mac_intr(struct sky2_hw *hw, unsigned port)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
u8 status = sky2_read8(hw, SK_REG(port, GMAC_IRQ_SRC));
|
|
|
|
netif_info(sky2, intr, dev, "mac interrupt status 0x%x\n", status);
|
|
|
|
if (status & GM_IS_RX_CO_OV)
|
|
gma_read16(hw, port, GM_RX_IRQ_SRC);
|
|
|
|
if (status & GM_IS_TX_CO_OV)
|
|
gma_read16(hw, port, GM_TX_IRQ_SRC);
|
|
|
|
if (status & GM_IS_RX_FF_OR) {
|
|
++dev->stats.rx_fifo_errors;
|
|
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
|
|
}
|
|
|
|
if (status & GM_IS_TX_FF_UR) {
|
|
++dev->stats.tx_fifo_errors;
|
|
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
|
|
}
|
|
}
|
|
|
|
/* This should never happen it is a bug. */
|
|
static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
|
|
{
|
|
struct net_device *dev = hw->dev[port];
|
|
u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
|
|
|
|
dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
|
|
dev->name, (unsigned) q, (unsigned) idx,
|
|
(unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
|
|
|
|
sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK);
|
|
}
|
|
|
|
static int sky2_rx_hung(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
unsigned rxq = rxqaddr[port];
|
|
u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP));
|
|
u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV));
|
|
u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP));
|
|
u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL));
|
|
|
|
/* If idle and MAC or PCI is stuck */
|
|
if (sky2->check.last == dev->last_rx &&
|
|
((mac_rp == sky2->check.mac_rp &&
|
|
mac_lev != 0 && mac_lev >= sky2->check.mac_lev) ||
|
|
/* Check if the PCI RX hang */
|
|
(fifo_rp == sky2->check.fifo_rp &&
|
|
fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
|
|
netdev_printk(KERN_DEBUG, dev,
|
|
"hung mac %d:%d fifo %d (%d:%d)\n",
|
|
mac_lev, mac_rp, fifo_lev,
|
|
fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
|
|
return 1;
|
|
} else {
|
|
sky2->check.last = dev->last_rx;
|
|
sky2->check.mac_rp = mac_rp;
|
|
sky2->check.mac_lev = mac_lev;
|
|
sky2->check.fifo_rp = fifo_rp;
|
|
sky2->check.fifo_lev = fifo_lev;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void sky2_watchdog(unsigned long arg)
|
|
{
|
|
struct sky2_hw *hw = (struct sky2_hw *) arg;
|
|
|
|
/* Check for lost IRQ once a second */
|
|
if (sky2_read32(hw, B0_ISRC)) {
|
|
napi_schedule(&hw->napi);
|
|
} else {
|
|
int i, active = 0;
|
|
|
|
for (i = 0; i < hw->ports; i++) {
|
|
struct net_device *dev = hw->dev[i];
|
|
if (!netif_running(dev))
|
|
continue;
|
|
++active;
|
|
|
|
/* For chips with Rx FIFO, check if stuck */
|
|
if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
|
|
sky2_rx_hung(dev)) {
|
|
netdev_info(dev, "receiver hang detected\n");
|
|
schedule_work(&hw->restart_work);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (active == 0)
|
|
return;
|
|
}
|
|
|
|
mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ));
|
|
}
|
|
|
|
/* Hardware/software error handling */
|
|
static void sky2_err_intr(struct sky2_hw *hw, u32 status)
|
|
{
|
|
if (net_ratelimit())
|
|
dev_warn(&hw->pdev->dev, "error interrupt status=%#x\n", status);
|
|
|
|
if (status & Y2_IS_HW_ERR)
|
|
sky2_hw_intr(hw);
|
|
|
|
if (status & Y2_IS_IRQ_MAC1)
|
|
sky2_mac_intr(hw, 0);
|
|
|
|
if (status & Y2_IS_IRQ_MAC2)
|
|
sky2_mac_intr(hw, 1);
|
|
|
|
if (status & Y2_IS_CHK_RX1)
|
|
sky2_le_error(hw, 0, Q_R1);
|
|
|
|
if (status & Y2_IS_CHK_RX2)
|
|
sky2_le_error(hw, 1, Q_R2);
|
|
|
|
if (status & Y2_IS_CHK_TXA1)
|
|
sky2_le_error(hw, 0, Q_XA1);
|
|
|
|
if (status & Y2_IS_CHK_TXA2)
|
|
sky2_le_error(hw, 1, Q_XA2);
|
|
}
|
|
|
|
static int sky2_poll(struct napi_struct *napi, int work_limit)
|
|
{
|
|
struct sky2_hw *hw = container_of(napi, struct sky2_hw, napi);
|
|
u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
|
|
int work_done = 0;
|
|
u16 idx;
|
|
|
|
if (unlikely(status & Y2_IS_ERROR))
|
|
sky2_err_intr(hw, status);
|
|
|
|
if (status & Y2_IS_IRQ_PHY1)
|
|
sky2_phy_intr(hw, 0);
|
|
|
|
if (status & Y2_IS_IRQ_PHY2)
|
|
sky2_phy_intr(hw, 1);
|
|
|
|
if (status & Y2_IS_PHY_QLNK)
|
|
sky2_qlink_intr(hw);
|
|
|
|
while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
|
|
work_done += sky2_status_intr(hw, work_limit - work_done, idx);
|
|
|
|
if (work_done >= work_limit)
|
|
goto done;
|
|
}
|
|
|
|
napi_complete(napi);
|
|
sky2_read32(hw, B0_Y2_SP_LISR);
|
|
done:
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static irqreturn_t sky2_intr(int irq, void *dev_id)
|
|
{
|
|
struct sky2_hw *hw = dev_id;
|
|
u32 status;
|
|
|
|
/* Reading this mask interrupts as side effect */
|
|
status = sky2_read32(hw, B0_Y2_SP_ISRC2);
|
|
if (status == 0 || status == ~0)
|
|
return IRQ_NONE;
|
|
|
|
prefetch(&hw->st_le[hw->st_idx]);
|
|
|
|
napi_schedule(&hw->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void sky2_netpoll(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
napi_schedule(&sky2->hw->napi);
|
|
}
|
|
#endif
|
|
|
|
/* Chip internal frequency for clock calculations */
|
|
static u32 sky2_mhz(const struct sky2_hw *hw)
|
|
{
|
|
switch (hw->chip_id) {
|
|
case CHIP_ID_YUKON_EC:
|
|
case CHIP_ID_YUKON_EC_U:
|
|
case CHIP_ID_YUKON_EX:
|
|
case CHIP_ID_YUKON_SUPR:
|
|
case CHIP_ID_YUKON_UL_2:
|
|
case CHIP_ID_YUKON_OPT:
|
|
return 125;
|
|
|
|
case CHIP_ID_YUKON_FE:
|
|
return 100;
|
|
|
|
case CHIP_ID_YUKON_FE_P:
|
|
return 50;
|
|
|
|
case CHIP_ID_YUKON_XL:
|
|
return 156;
|
|
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline u32 sky2_us2clk(const struct sky2_hw *hw, u32 us)
|
|
{
|
|
return sky2_mhz(hw) * us;
|
|
}
|
|
|
|
static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
|
|
{
|
|
return clk / sky2_mhz(hw);
|
|
}
|
|
|
|
|
|
static int __devinit sky2_init(struct sky2_hw *hw)
|
|
{
|
|
u8 t8;
|
|
|
|
/* Enable all clocks and check for bad PCI access */
|
|
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
|
|
|
|
sky2_write8(hw, B0_CTST, CS_RST_CLR);
|
|
|
|
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
|
|
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
|
|
|
|
switch (hw->chip_id) {
|
|
case CHIP_ID_YUKON_XL:
|
|
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
|
|
if (hw->chip_rev < CHIP_REV_YU_XL_A2)
|
|
hw->flags |= SKY2_HW_RSS_BROKEN;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_EC_U:
|
|
hw->flags = SKY2_HW_GIGABIT
|
|
| SKY2_HW_NEWER_PHY
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_EX:
|
|
hw->flags = SKY2_HW_GIGABIT
|
|
| SKY2_HW_NEWER_PHY
|
|
| SKY2_HW_NEW_LE
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
|
|
/* New transmit checksum */
|
|
if (hw->chip_rev != CHIP_REV_YU_EX_B0)
|
|
hw->flags |= SKY2_HW_AUTO_TX_SUM;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_EC:
|
|
/* This rev is really old, and requires untested workarounds */
|
|
if (hw->chip_rev == CHIP_REV_YU_EC_A1) {
|
|
dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_FE:
|
|
hw->flags = SKY2_HW_RSS_BROKEN;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_FE_P:
|
|
hw->flags = SKY2_HW_NEWER_PHY
|
|
| SKY2_HW_NEW_LE
|
|
| SKY2_HW_AUTO_TX_SUM
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
|
|
/* The workaround for status conflicts VLAN tag detection. */
|
|
if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
|
|
hw->flags |= SKY2_HW_VLAN_BROKEN;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_SUPR:
|
|
hw->flags = SKY2_HW_GIGABIT
|
|
| SKY2_HW_NEWER_PHY
|
|
| SKY2_HW_NEW_LE
|
|
| SKY2_HW_AUTO_TX_SUM
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_UL_2:
|
|
hw->flags = SKY2_HW_GIGABIT
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
break;
|
|
|
|
case CHIP_ID_YUKON_OPT:
|
|
hw->flags = SKY2_HW_GIGABIT
|
|
| SKY2_HW_NEW_LE
|
|
| SKY2_HW_ADV_POWER_CTL;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
|
|
hw->chip_id);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
|
|
if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P')
|
|
hw->flags |= SKY2_HW_FIBRE_PHY;
|
|
|
|
hw->ports = 1;
|
|
t8 = sky2_read8(hw, B2_Y2_HW_RES);
|
|
if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
|
|
if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
|
|
++hw->ports;
|
|
}
|
|
|
|
if (sky2_read8(hw, B2_E_0))
|
|
hw->flags |= SKY2_HW_RAM_BUFFER;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sky2_reset(struct sky2_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->pdev;
|
|
u16 status;
|
|
int i, cap;
|
|
u32 hwe_mask = Y2_HWE_ALL_MASK;
|
|
|
|
/* disable ASF */
|
|
if (hw->chip_id == CHIP_ID_YUKON_EX
|
|
|| hw->chip_id == CHIP_ID_YUKON_SUPR) {
|
|
sky2_write32(hw, CPU_WDOG, 0);
|
|
status = sky2_read16(hw, HCU_CCSR);
|
|
status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
|
|
HCU_CCSR_UC_STATE_MSK);
|
|
/*
|
|
* CPU clock divider shouldn't be used because
|
|
* - ASF firmware may malfunction
|
|
* - Yukon-Supreme: Parallel FLASH doesn't support divided clocks
|
|
*/
|
|
status &= ~HCU_CCSR_CPU_CLK_DIVIDE_MSK;
|
|
sky2_write16(hw, HCU_CCSR, status);
|
|
sky2_write32(hw, CPU_WDOG, 0);
|
|
} else
|
|
sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
|
|
sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
|
|
|
|
/* do a SW reset */
|
|
sky2_write8(hw, B0_CTST, CS_RST_SET);
|
|
sky2_write8(hw, B0_CTST, CS_RST_CLR);
|
|
|
|
/* allow writes to PCI config */
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
|
|
/* clear PCI errors, if any */
|
|
status = sky2_pci_read16(hw, PCI_STATUS);
|
|
status |= PCI_STATUS_ERROR_BITS;
|
|
sky2_pci_write16(hw, PCI_STATUS, status);
|
|
|
|
sky2_write8(hw, B0_CTST, CS_MRST_CLR);
|
|
|
|
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
if (cap) {
|
|
sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
|
|
0xfffffffful);
|
|
|
|
/* If error bit is stuck on ignore it */
|
|
if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
|
|
dev_info(&pdev->dev, "ignoring stuck error report bit\n");
|
|
else
|
|
hwe_mask |= Y2_IS_PCI_EXP;
|
|
}
|
|
|
|
sky2_power_on(hw);
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
|
|
for (i = 0; i < hw->ports; i++) {
|
|
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
|
|
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_EX ||
|
|
hw->chip_id == CHIP_ID_YUKON_SUPR)
|
|
sky2_write16(hw, SK_REG(i, GMAC_CTRL),
|
|
GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
|
|
| GMC_BYP_RETR_ON);
|
|
|
|
}
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
|
|
/* enable MACSec clock gating */
|
|
sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
|
|
}
|
|
|
|
if (hw->chip_id == CHIP_ID_YUKON_OPT) {
|
|
u16 reg;
|
|
u32 msk;
|
|
|
|
if (hw->chip_rev == 0) {
|
|
/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
|
|
sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
|
|
|
|
/* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
|
|
reg = 10;
|
|
} else {
|
|
/* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
|
|
reg = 3;
|
|
}
|
|
|
|
reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
|
|
|
|
/* reset PHY Link Detect */
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
sky2_pci_write16(hw, PSM_CONFIG_REG4,
|
|
reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
|
|
sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
|
|
|
|
|
|
/* enable PHY Quick Link */
|
|
msk = sky2_read32(hw, B0_IMSK);
|
|
msk |= Y2_IS_PHY_QLNK;
|
|
sky2_write32(hw, B0_IMSK, msk);
|
|
|
|
/* check if PSMv2 was running before */
|
|
reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
|
|
if (reg & PCI_EXP_LNKCTL_ASPMC) {
|
|
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
/* restore the PCIe Link Control register */
|
|
sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
|
|
}
|
|
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
|
|
/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
|
|
sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
|
|
}
|
|
|
|
/* Clear I2C IRQ noise */
|
|
sky2_write32(hw, B2_I2C_IRQ, 1);
|
|
|
|
/* turn off hardware timer (unused) */
|
|
sky2_write8(hw, B2_TI_CTRL, TIM_STOP);
|
|
sky2_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ);
|
|
|
|
/* Turn off descriptor polling */
|
|
sky2_write32(hw, B28_DPT_CTRL, DPT_STOP);
|
|
|
|
/* Turn off receive timestamp */
|
|
sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_STOP);
|
|
sky2_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
|
|
|
|
/* enable the Tx Arbiters */
|
|
for (i = 0; i < hw->ports; i++)
|
|
sky2_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB);
|
|
|
|
/* Initialize ram interface */
|
|
for (i = 0; i < hw->ports; i++) {
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_CTRL), RI_RST_CLR);
|
|
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS1), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_R2), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XA2), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_WTO_XS2), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_R2), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XA2), SK_RI_TO_53);
|
|
sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
|
|
}
|
|
|
|
sky2_write32(hw, B0_HWE_IMSK, hwe_mask);
|
|
|
|
for (i = 0; i < hw->ports; i++)
|
|
sky2_gmac_reset(hw, i);
|
|
|
|
memset(hw->st_le, 0, hw->st_size * sizeof(struct sky2_status_le));
|
|
hw->st_idx = 0;
|
|
|
|
sky2_write32(hw, STAT_CTRL, SC_STAT_RST_SET);
|
|
sky2_write32(hw, STAT_CTRL, SC_STAT_RST_CLR);
|
|
|
|
sky2_write32(hw, STAT_LIST_ADDR_LO, hw->st_dma);
|
|
sky2_write32(hw, STAT_LIST_ADDR_HI, (u64) hw->st_dma >> 32);
|
|
|
|
/* Set the list last index */
|
|
sky2_write16(hw, STAT_LAST_IDX, hw->st_size - 1);
|
|
|
|
sky2_write16(hw, STAT_TX_IDX_TH, 10);
|
|
sky2_write8(hw, STAT_FIFO_WM, 16);
|
|
|
|
/* set Status-FIFO ISR watermark */
|
|
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
|
|
sky2_write8(hw, STAT_FIFO_ISR_WM, 4);
|
|
else
|
|
sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
|
|
|
|
sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
|
|
sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
|
|
sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
|
|
|
|
/* enable status unit */
|
|
sky2_write32(hw, STAT_CTRL, SC_STAT_OP_ON);
|
|
|
|
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
|
|
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
|
|
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
|
|
}
|
|
|
|
/* Take device down (offline).
|
|
* Equivalent to doing dev_stop() but this does not
|
|
* inform upper layers of the transition.
|
|
*/
|
|
static void sky2_detach(struct net_device *dev)
|
|
{
|
|
if (netif_running(dev)) {
|
|
netif_tx_lock(dev);
|
|
netif_device_detach(dev); /* stop txq */
|
|
netif_tx_unlock(dev);
|
|
sky2_down(dev);
|
|
}
|
|
}
|
|
|
|
/* Bring device back after doing sky2_detach */
|
|
static int sky2_reattach(struct net_device *dev)
|
|
{
|
|
int err = 0;
|
|
|
|
if (netif_running(dev)) {
|
|
err = sky2_up(dev);
|
|
if (err) {
|
|
netdev_info(dev, "could not restart %d\n", err);
|
|
dev_close(dev);
|
|
} else {
|
|
netif_device_attach(dev);
|
|
sky2_set_multicast(dev);
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static void sky2_all_down(struct sky2_hw *hw)
|
|
{
|
|
int i;
|
|
|
|
sky2_read32(hw, B0_IMSK);
|
|
sky2_write32(hw, B0_IMSK, 0);
|
|
synchronize_irq(hw->pdev->irq);
|
|
napi_disable(&hw->napi);
|
|
|
|
for (i = 0; i < hw->ports; i++) {
|
|
struct net_device *dev = hw->dev[i];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
continue;
|
|
|
|
netif_carrier_off(dev);
|
|
netif_tx_disable(dev);
|
|
sky2_hw_down(sky2);
|
|
}
|
|
}
|
|
|
|
static void sky2_all_up(struct sky2_hw *hw)
|
|
{
|
|
u32 imask = Y2_IS_BASE;
|
|
int i;
|
|
|
|
for (i = 0; i < hw->ports; i++) {
|
|
struct net_device *dev = hw->dev[i];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
continue;
|
|
|
|
sky2_hw_up(sky2);
|
|
sky2_set_multicast(dev);
|
|
imask |= portirq_msk[i];
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
sky2_write32(hw, B0_IMSK, imask);
|
|
sky2_read32(hw, B0_IMSK);
|
|
|
|
sky2_read32(hw, B0_Y2_SP_LISR);
|
|
napi_enable(&hw->napi);
|
|
}
|
|
|
|
static void sky2_restart(struct work_struct *work)
|
|
{
|
|
struct sky2_hw *hw = container_of(work, struct sky2_hw, restart_work);
|
|
|
|
rtnl_lock();
|
|
|
|
sky2_all_down(hw);
|
|
sky2_reset(hw);
|
|
sky2_all_up(hw);
|
|
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
|
|
{
|
|
return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
|
|
}
|
|
|
|
static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
const struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
wol->supported = sky2_wol_supported(sky2->hw);
|
|
wol->wolopts = sky2->wol;
|
|
}
|
|
|
|
static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
bool enable_wakeup = false;
|
|
int i;
|
|
|
|
if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
|
|
!device_can_wakeup(&hw->pdev->dev))
|
|
return -EOPNOTSUPP;
|
|
|
|
sky2->wol = wol->wolopts;
|
|
|
|
for (i = 0; i < hw->ports; i++) {
|
|
struct net_device *dev = hw->dev[i];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (sky2->wol)
|
|
enable_wakeup = true;
|
|
}
|
|
device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 sky2_supported_modes(const struct sky2_hw *hw)
|
|
{
|
|
if (sky2_is_copper(hw)) {
|
|
u32 modes = SUPPORTED_10baseT_Half
|
|
| SUPPORTED_10baseT_Full
|
|
| SUPPORTED_100baseT_Half
|
|
| SUPPORTED_100baseT_Full;
|
|
|
|
if (hw->flags & SKY2_HW_GIGABIT)
|
|
modes |= SUPPORTED_1000baseT_Half
|
|
| SUPPORTED_1000baseT_Full;
|
|
return modes;
|
|
} else
|
|
return SUPPORTED_1000baseT_Half
|
|
| SUPPORTED_1000baseT_Full;
|
|
}
|
|
|
|
static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
ecmd->supported = sky2_supported_modes(hw);
|
|
ecmd->phy_address = PHY_ADDR_MARV;
|
|
if (sky2_is_copper(hw)) {
|
|
ecmd->port = PORT_TP;
|
|
ethtool_cmd_speed_set(ecmd, sky2->speed);
|
|
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
|
|
} else {
|
|
ethtool_cmd_speed_set(ecmd, SPEED_1000);
|
|
ecmd->port = PORT_FIBRE;
|
|
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
|
|
}
|
|
|
|
ecmd->advertising = sky2->advertising;
|
|
ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
|
|
? AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
ecmd->duplex = sky2->duplex;
|
|
return 0;
|
|
}
|
|
|
|
static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
const struct sky2_hw *hw = sky2->hw;
|
|
u32 supported = sky2_supported_modes(hw);
|
|
|
|
if (ecmd->autoneg == AUTONEG_ENABLE) {
|
|
if (ecmd->advertising & ~supported)
|
|
return -EINVAL;
|
|
|
|
if (sky2_is_copper(hw))
|
|
sky2->advertising = ecmd->advertising |
|
|
ADVERTISED_TP |
|
|
ADVERTISED_Autoneg;
|
|
else
|
|
sky2->advertising = ecmd->advertising |
|
|
ADVERTISED_FIBRE |
|
|
ADVERTISED_Autoneg;
|
|
|
|
sky2->flags |= SKY2_FLAG_AUTO_SPEED;
|
|
sky2->duplex = -1;
|
|
sky2->speed = -1;
|
|
} else {
|
|
u32 setting;
|
|
u32 speed = ethtool_cmd_speed(ecmd);
|
|
|
|
switch (speed) {
|
|
case SPEED_1000:
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
setting = SUPPORTED_1000baseT_Full;
|
|
else if (ecmd->duplex == DUPLEX_HALF)
|
|
setting = SUPPORTED_1000baseT_Half;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
case SPEED_100:
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
setting = SUPPORTED_100baseT_Full;
|
|
else if (ecmd->duplex == DUPLEX_HALF)
|
|
setting = SUPPORTED_100baseT_Half;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
|
|
case SPEED_10:
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
setting = SUPPORTED_10baseT_Full;
|
|
else if (ecmd->duplex == DUPLEX_HALF)
|
|
setting = SUPPORTED_10baseT_Half;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((setting & supported) == 0)
|
|
return -EINVAL;
|
|
|
|
sky2->speed = speed;
|
|
sky2->duplex = ecmd->duplex;
|
|
sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
|
|
}
|
|
|
|
if (netif_running(dev)) {
|
|
sky2_phy_reinit(sky2);
|
|
sky2_set_multicast(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sky2_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->fw_version, "N/A");
|
|
strcpy(info->bus_info, pci_name(sky2->hw->pdev));
|
|
}
|
|
|
|
static const struct sky2_stat {
|
|
char name[ETH_GSTRING_LEN];
|
|
u16 offset;
|
|
} sky2_stats[] = {
|
|
{ "tx_bytes", GM_TXO_OK_HI },
|
|
{ "rx_bytes", GM_RXO_OK_HI },
|
|
{ "tx_broadcast", GM_TXF_BC_OK },
|
|
{ "rx_broadcast", GM_RXF_BC_OK },
|
|
{ "tx_multicast", GM_TXF_MC_OK },
|
|
{ "rx_multicast", GM_RXF_MC_OK },
|
|
{ "tx_unicast", GM_TXF_UC_OK },
|
|
{ "rx_unicast", GM_RXF_UC_OK },
|
|
{ "tx_mac_pause", GM_TXF_MPAUSE },
|
|
{ "rx_mac_pause", GM_RXF_MPAUSE },
|
|
{ "collisions", GM_TXF_COL },
|
|
{ "late_collision",GM_TXF_LAT_COL },
|
|
{ "aborted", GM_TXF_ABO_COL },
|
|
{ "single_collisions", GM_TXF_SNG_COL },
|
|
{ "multi_collisions", GM_TXF_MUL_COL },
|
|
|
|
{ "rx_short", GM_RXF_SHT },
|
|
{ "rx_runt", GM_RXE_FRAG },
|
|
{ "rx_64_byte_packets", GM_RXF_64B },
|
|
{ "rx_65_to_127_byte_packets", GM_RXF_127B },
|
|
{ "rx_128_to_255_byte_packets", GM_RXF_255B },
|
|
{ "rx_256_to_511_byte_packets", GM_RXF_511B },
|
|
{ "rx_512_to_1023_byte_packets", GM_RXF_1023B },
|
|
{ "rx_1024_to_1518_byte_packets", GM_RXF_1518B },
|
|
{ "rx_1518_to_max_byte_packets", GM_RXF_MAX_SZ },
|
|
{ "rx_too_long", GM_RXF_LNG_ERR },
|
|
{ "rx_fifo_overflow", GM_RXE_FIFO_OV },
|
|
{ "rx_jabber", GM_RXF_JAB_PKT },
|
|
{ "rx_fcs_error", GM_RXF_FCS_ERR },
|
|
|
|
{ "tx_64_byte_packets", GM_TXF_64B },
|
|
{ "tx_65_to_127_byte_packets", GM_TXF_127B },
|
|
{ "tx_128_to_255_byte_packets", GM_TXF_255B },
|
|
{ "tx_256_to_511_byte_packets", GM_TXF_511B },
|
|
{ "tx_512_to_1023_byte_packets", GM_TXF_1023B },
|
|
{ "tx_1024_to_1518_byte_packets", GM_TXF_1518B },
|
|
{ "tx_1519_to_max_byte_packets", GM_TXF_MAX_SZ },
|
|
{ "tx_fifo_underrun", GM_TXE_FIFO_UR },
|
|
};
|
|
|
|
static u32 sky2_get_msglevel(struct net_device *netdev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(netdev);
|
|
return sky2->msg_enable;
|
|
}
|
|
|
|
static int sky2_nway_reset(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev) || !(sky2->flags & SKY2_FLAG_AUTO_SPEED))
|
|
return -EINVAL;
|
|
|
|
sky2_phy_reinit(sky2);
|
|
sky2_set_multicast(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
int i;
|
|
|
|
data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
|
|
data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
|
|
|
|
for (i = 2; i < count; i++)
|
|
data[i] = get_stats32(hw, port, sky2_stats[i].offset);
|
|
}
|
|
|
|
static void sky2_set_msglevel(struct net_device *netdev, u32 value)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(netdev);
|
|
sky2->msg_enable = value;
|
|
}
|
|
|
|
static int sky2_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return ARRAY_SIZE(sky2_stats);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void sky2_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 * data)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
sky2_phy_stats(sky2, data, ARRAY_SIZE(sky2_stats));
|
|
}
|
|
|
|
static void sky2_get_strings(struct net_device *dev, u32 stringset, u8 * data)
|
|
{
|
|
int i;
|
|
|
|
switch (stringset) {
|
|
case ETH_SS_STATS:
|
|
for (i = 0; i < ARRAY_SIZE(sky2_stats); i++)
|
|
memcpy(data + i * ETH_GSTRING_LEN,
|
|
sky2_stats[i].name, ETH_GSTRING_LEN);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int sky2_set_mac_address(struct net_device *dev, void *p)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
const struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
|
|
memcpy_toio(hw->regs + B2_MAC_1 + port * 8,
|
|
dev->dev_addr, ETH_ALEN);
|
|
memcpy_toio(hw->regs + B2_MAC_2 + port * 8,
|
|
dev->dev_addr, ETH_ALEN);
|
|
|
|
/* virtual address for data */
|
|
gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr);
|
|
|
|
/* physical address: used for pause frames */
|
|
gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void sky2_add_filter(u8 filter[8], const u8 *addr)
|
|
{
|
|
u32 bit;
|
|
|
|
bit = ether_crc(ETH_ALEN, addr) & 63;
|
|
filter[bit >> 3] |= 1 << (bit & 7);
|
|
}
|
|
|
|
static void sky2_set_multicast(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
struct netdev_hw_addr *ha;
|
|
u16 reg;
|
|
u8 filter[8];
|
|
int rx_pause;
|
|
static const u8 pause_mc_addr[ETH_ALEN] = { 0x1, 0x80, 0xc2, 0x0, 0x0, 0x1 };
|
|
|
|
rx_pause = (sky2->flow_status == FC_RX || sky2->flow_status == FC_BOTH);
|
|
memset(filter, 0, sizeof(filter));
|
|
|
|
reg = gma_read16(hw, port, GM_RX_CTRL);
|
|
reg |= GM_RXCR_UCF_ENA;
|
|
|
|
if (dev->flags & IFF_PROMISC) /* promiscuous */
|
|
reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
|
|
else if (dev->flags & IFF_ALLMULTI)
|
|
memset(filter, 0xff, sizeof(filter));
|
|
else if (netdev_mc_empty(dev) && !rx_pause)
|
|
reg &= ~GM_RXCR_MCF_ENA;
|
|
else {
|
|
reg |= GM_RXCR_MCF_ENA;
|
|
|
|
if (rx_pause)
|
|
sky2_add_filter(filter, pause_mc_addr);
|
|
|
|
netdev_for_each_mc_addr(ha, dev)
|
|
sky2_add_filter(filter, ha->addr);
|
|
}
|
|
|
|
gma_write16(hw, port, GM_MC_ADDR_H1,
|
|
(u16) filter[0] | ((u16) filter[1] << 8));
|
|
gma_write16(hw, port, GM_MC_ADDR_H2,
|
|
(u16) filter[2] | ((u16) filter[3] << 8));
|
|
gma_write16(hw, port, GM_MC_ADDR_H3,
|
|
(u16) filter[4] | ((u16) filter[5] << 8));
|
|
gma_write16(hw, port, GM_MC_ADDR_H4,
|
|
(u16) filter[6] | ((u16) filter[7] << 8));
|
|
|
|
gma_write16(hw, port, GM_RX_CTRL, reg);
|
|
}
|
|
|
|
static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
|
|
struct rtnl_link_stats64 *stats)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
unsigned int start;
|
|
u64 _bytes, _packets;
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&sky2->rx_stats.syncp);
|
|
_bytes = sky2->rx_stats.bytes;
|
|
_packets = sky2->rx_stats.packets;
|
|
} while (u64_stats_fetch_retry_bh(&sky2->rx_stats.syncp, start));
|
|
|
|
stats->rx_packets = _packets;
|
|
stats->rx_bytes = _bytes;
|
|
|
|
do {
|
|
start = u64_stats_fetch_begin_bh(&sky2->tx_stats.syncp);
|
|
_bytes = sky2->tx_stats.bytes;
|
|
_packets = sky2->tx_stats.packets;
|
|
} while (u64_stats_fetch_retry_bh(&sky2->tx_stats.syncp, start));
|
|
|
|
stats->tx_packets = _packets;
|
|
stats->tx_bytes = _bytes;
|
|
|
|
stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
|
|
+ get_stats32(hw, port, GM_RXF_BC_OK);
|
|
|
|
stats->collisions = get_stats32(hw, port, GM_TXF_COL);
|
|
|
|
stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
|
|
stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
|
|
stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
|
|
+ get_stats32(hw, port, GM_RXE_FRAG);
|
|
stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
|
|
|
|
stats->rx_dropped = dev->stats.rx_dropped;
|
|
stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
|
|
stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
|
|
|
|
return stats;
|
|
}
|
|
|
|
/* Can have one global because blinking is controlled by
|
|
* ethtool and that is always under RTNL mutex
|
|
*/
|
|
static void sky2_led(struct sky2_port *sky2, enum led_mode mode)
|
|
{
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
|
|
spin_lock_bh(&sky2->phy_lock);
|
|
if (hw->chip_id == CHIP_ID_YUKON_EC_U ||
|
|
hw->chip_id == CHIP_ID_YUKON_EX ||
|
|
hw->chip_id == CHIP_ID_YUKON_SUPR) {
|
|
u16 pg;
|
|
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
|
|
|
|
switch (mode) {
|
|
case MO_LED_OFF:
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
PHY_M_LEDC_LOS_CTRL(8) |
|
|
PHY_M_LEDC_INIT_CTRL(8) |
|
|
PHY_M_LEDC_STA1_CTRL(8) |
|
|
PHY_M_LEDC_STA0_CTRL(8));
|
|
break;
|
|
case MO_LED_ON:
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
PHY_M_LEDC_LOS_CTRL(9) |
|
|
PHY_M_LEDC_INIT_CTRL(9) |
|
|
PHY_M_LEDC_STA1_CTRL(9) |
|
|
PHY_M_LEDC_STA0_CTRL(9));
|
|
break;
|
|
case MO_LED_BLINK:
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
PHY_M_LEDC_LOS_CTRL(0xa) |
|
|
PHY_M_LEDC_INIT_CTRL(0xa) |
|
|
PHY_M_LEDC_STA1_CTRL(0xa) |
|
|
PHY_M_LEDC_STA0_CTRL(0xa));
|
|
break;
|
|
case MO_LED_NORM:
|
|
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
|
|
PHY_M_LEDC_LOS_CTRL(1) |
|
|
PHY_M_LEDC_INIT_CTRL(8) |
|
|
PHY_M_LEDC_STA1_CTRL(7) |
|
|
PHY_M_LEDC_STA0_CTRL(7));
|
|
}
|
|
|
|
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
|
|
} else
|
|
gm_phy_write(hw, port, PHY_MARV_LED_OVER,
|
|
PHY_M_LED_MO_DUP(mode) |
|
|
PHY_M_LED_MO_10(mode) |
|
|
PHY_M_LED_MO_100(mode) |
|
|
PHY_M_LED_MO_1000(mode) |
|
|
PHY_M_LED_MO_RX(mode) |
|
|
PHY_M_LED_MO_TX(mode));
|
|
|
|
spin_unlock_bh(&sky2->phy_lock);
|
|
}
|
|
|
|
/* blink LED's for finding board */
|
|
static int sky2_set_phys_id(struct net_device *dev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
return 1; /* cycle on/off once per second */
|
|
case ETHTOOL_ID_INACTIVE:
|
|
sky2_led(sky2, MO_LED_NORM);
|
|
break;
|
|
case ETHTOOL_ID_ON:
|
|
sky2_led(sky2, MO_LED_ON);
|
|
break;
|
|
case ETHTOOL_ID_OFF:
|
|
sky2_led(sky2, MO_LED_OFF);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sky2_get_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
switch (sky2->flow_mode) {
|
|
case FC_NONE:
|
|
ecmd->tx_pause = ecmd->rx_pause = 0;
|
|
break;
|
|
case FC_TX:
|
|
ecmd->tx_pause = 1, ecmd->rx_pause = 0;
|
|
break;
|
|
case FC_RX:
|
|
ecmd->tx_pause = 0, ecmd->rx_pause = 1;
|
|
break;
|
|
case FC_BOTH:
|
|
ecmd->tx_pause = ecmd->rx_pause = 1;
|
|
}
|
|
|
|
ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_PAUSE)
|
|
? AUTONEG_ENABLE : AUTONEG_DISABLE;
|
|
}
|
|
|
|
static int sky2_set_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (ecmd->autoneg == AUTONEG_ENABLE)
|
|
sky2->flags |= SKY2_FLAG_AUTO_PAUSE;
|
|
else
|
|
sky2->flags &= ~SKY2_FLAG_AUTO_PAUSE;
|
|
|
|
sky2->flow_mode = sky2_flow(ecmd->rx_pause, ecmd->tx_pause);
|
|
|
|
if (netif_running(dev))
|
|
sky2_phy_reinit(sky2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sky2_get_coalesce(struct net_device *dev,
|
|
struct ethtool_coalesce *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
|
|
if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_STOP)
|
|
ecmd->tx_coalesce_usecs = 0;
|
|
else {
|
|
u32 clks = sky2_read32(hw, STAT_TX_TIMER_INI);
|
|
ecmd->tx_coalesce_usecs = sky2_clk2us(hw, clks);
|
|
}
|
|
ecmd->tx_max_coalesced_frames = sky2_read16(hw, STAT_TX_IDX_TH);
|
|
|
|
if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_STOP)
|
|
ecmd->rx_coalesce_usecs = 0;
|
|
else {
|
|
u32 clks = sky2_read32(hw, STAT_LEV_TIMER_INI);
|
|
ecmd->rx_coalesce_usecs = sky2_clk2us(hw, clks);
|
|
}
|
|
ecmd->rx_max_coalesced_frames = sky2_read8(hw, STAT_FIFO_WM);
|
|
|
|
if (sky2_read8(hw, STAT_ISR_TIMER_CTRL) == TIM_STOP)
|
|
ecmd->rx_coalesce_usecs_irq = 0;
|
|
else {
|
|
u32 clks = sky2_read32(hw, STAT_ISR_TIMER_INI);
|
|
ecmd->rx_coalesce_usecs_irq = sky2_clk2us(hw, clks);
|
|
}
|
|
|
|
ecmd->rx_max_coalesced_frames_irq = sky2_read8(hw, STAT_FIFO_ISR_WM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Note: this affect both ports */
|
|
static int sky2_set_coalesce(struct net_device *dev,
|
|
struct ethtool_coalesce *ecmd)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
const u32 tmax = sky2_clk2us(hw, 0x0ffffff);
|
|
|
|
if (ecmd->tx_coalesce_usecs > tmax ||
|
|
ecmd->rx_coalesce_usecs > tmax ||
|
|
ecmd->rx_coalesce_usecs_irq > tmax)
|
|
return -EINVAL;
|
|
|
|
if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1)
|
|
return -EINVAL;
|
|
if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
|
|
return -EINVAL;
|
|
if (ecmd->rx_max_coalesced_frames_irq > RX_MAX_PENDING)
|
|
return -EINVAL;
|
|
|
|
if (ecmd->tx_coalesce_usecs == 0)
|
|
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
|
|
else {
|
|
sky2_write32(hw, STAT_TX_TIMER_INI,
|
|
sky2_us2clk(hw, ecmd->tx_coalesce_usecs));
|
|
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
|
|
}
|
|
sky2_write16(hw, STAT_TX_IDX_TH, ecmd->tx_max_coalesced_frames);
|
|
|
|
if (ecmd->rx_coalesce_usecs == 0)
|
|
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
|
|
else {
|
|
sky2_write32(hw, STAT_LEV_TIMER_INI,
|
|
sky2_us2clk(hw, ecmd->rx_coalesce_usecs));
|
|
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
|
|
}
|
|
sky2_write8(hw, STAT_FIFO_WM, ecmd->rx_max_coalesced_frames);
|
|
|
|
if (ecmd->rx_coalesce_usecs_irq == 0)
|
|
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_STOP);
|
|
else {
|
|
sky2_write32(hw, STAT_ISR_TIMER_INI,
|
|
sky2_us2clk(hw, ecmd->rx_coalesce_usecs_irq));
|
|
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
|
|
}
|
|
sky2_write8(hw, STAT_FIFO_ISR_WM, ecmd->rx_max_coalesced_frames_irq);
|
|
return 0;
|
|
}
|
|
|
|
static void sky2_get_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
ering->rx_max_pending = RX_MAX_PENDING;
|
|
ering->rx_mini_max_pending = 0;
|
|
ering->rx_jumbo_max_pending = 0;
|
|
ering->tx_max_pending = TX_MAX_PENDING;
|
|
|
|
ering->rx_pending = sky2->rx_pending;
|
|
ering->rx_mini_pending = 0;
|
|
ering->rx_jumbo_pending = 0;
|
|
ering->tx_pending = sky2->tx_pending;
|
|
}
|
|
|
|
static int sky2_set_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (ering->rx_pending > RX_MAX_PENDING ||
|
|
ering->rx_pending < 8 ||
|
|
ering->tx_pending < TX_MIN_PENDING ||
|
|
ering->tx_pending > TX_MAX_PENDING)
|
|
return -EINVAL;
|
|
|
|
sky2_detach(dev);
|
|
|
|
sky2->rx_pending = ering->rx_pending;
|
|
sky2->tx_pending = ering->tx_pending;
|
|
sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1);
|
|
|
|
return sky2_reattach(dev);
|
|
}
|
|
|
|
static int sky2_get_regs_len(struct net_device *dev)
|
|
{
|
|
return 0x4000;
|
|
}
|
|
|
|
static int sky2_reg_access_ok(struct sky2_hw *hw, unsigned int b)
|
|
{
|
|
/* This complicated switch statement is to make sure and
|
|
* only access regions that are unreserved.
|
|
* Some blocks are only valid on dual port cards.
|
|
*/
|
|
switch (b) {
|
|
/* second port */
|
|
case 5: /* Tx Arbiter 2 */
|
|
case 9: /* RX2 */
|
|
case 14 ... 15: /* TX2 */
|
|
case 17: case 19: /* Ram Buffer 2 */
|
|
case 22 ... 23: /* Tx Ram Buffer 2 */
|
|
case 25: /* Rx MAC Fifo 1 */
|
|
case 27: /* Tx MAC Fifo 2 */
|
|
case 31: /* GPHY 2 */
|
|
case 40 ... 47: /* Pattern Ram 2 */
|
|
case 52: case 54: /* TCP Segmentation 2 */
|
|
case 112 ... 116: /* GMAC 2 */
|
|
return hw->ports > 1;
|
|
|
|
case 0: /* Control */
|
|
case 2: /* Mac address */
|
|
case 4: /* Tx Arbiter 1 */
|
|
case 7: /* PCI express reg */
|
|
case 8: /* RX1 */
|
|
case 12 ... 13: /* TX1 */
|
|
case 16: case 18:/* Rx Ram Buffer 1 */
|
|
case 20 ... 21: /* Tx Ram Buffer 1 */
|
|
case 24: /* Rx MAC Fifo 1 */
|
|
case 26: /* Tx MAC Fifo 1 */
|
|
case 28 ... 29: /* Descriptor and status unit */
|
|
case 30: /* GPHY 1*/
|
|
case 32 ... 39: /* Pattern Ram 1 */
|
|
case 48: case 50: /* TCP Segmentation 1 */
|
|
case 56 ... 60: /* PCI space */
|
|
case 80 ... 84: /* GMAC 1 */
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Returns copy of control register region
|
|
* Note: ethtool_get_regs always provides full size (16k) buffer
|
|
*/
|
|
static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
|
|
void *p)
|
|
{
|
|
const struct sky2_port *sky2 = netdev_priv(dev);
|
|
const void __iomem *io = sky2->hw->regs;
|
|
unsigned int b;
|
|
|
|
regs->version = 1;
|
|
|
|
for (b = 0; b < 128; b++) {
|
|
/* skip poisonous diagnostic ram region in block 3 */
|
|
if (b == 3)
|
|
memcpy_fromio(p + 0x10, io + 0x10, 128 - 0x10);
|
|
else if (sky2_reg_access_ok(sky2->hw, b))
|
|
memcpy_fromio(p, io, 128);
|
|
else
|
|
memset(p, 0, 128);
|
|
|
|
p += 128;
|
|
io += 128;
|
|
}
|
|
}
|
|
|
|
static int sky2_get_eeprom_len(struct net_device *dev)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
u16 reg2;
|
|
|
|
reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
|
|
return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
|
|
}
|
|
|
|
static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
|
|
{
|
|
unsigned long start = jiffies;
|
|
|
|
while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
|
|
/* Can take up to 10.6 ms for write */
|
|
if (time_after(jiffies, start + HZ/4)) {
|
|
dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
mdelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sky2_vpd_read(struct sky2_hw *hw, int cap, void *data,
|
|
u16 offset, size_t length)
|
|
{
|
|
int rc = 0;
|
|
|
|
while (length > 0) {
|
|
u32 val;
|
|
|
|
sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
|
|
rc = sky2_vpd_wait(hw, cap, 0);
|
|
if (rc)
|
|
break;
|
|
|
|
val = sky2_pci_read32(hw, cap + PCI_VPD_DATA);
|
|
|
|
memcpy(data, &val, min(sizeof(val), length));
|
|
offset += sizeof(u32);
|
|
data += sizeof(u32);
|
|
length -= sizeof(u32);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int sky2_vpd_write(struct sky2_hw *hw, int cap, const void *data,
|
|
u16 offset, unsigned int length)
|
|
{
|
|
unsigned int i;
|
|
int rc = 0;
|
|
|
|
for (i = 0; i < length; i += sizeof(u32)) {
|
|
u32 val = *(u32 *)(data + i);
|
|
|
|
sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
|
|
sky2_pci_write32(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
|
|
|
|
rc = sky2_vpd_wait(hw, cap, PCI_VPD_ADDR_F);
|
|
if (rc)
|
|
break;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
|
|
u8 *data)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
|
|
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
eeprom->magic = SKY2_EEPROM_MAGIC;
|
|
|
|
return sky2_vpd_read(sky2->hw, cap, data, eeprom->offset, eeprom->len);
|
|
}
|
|
|
|
static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
|
|
u8 *data)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
|
|
|
|
if (!cap)
|
|
return -EINVAL;
|
|
|
|
if (eeprom->magic != SKY2_EEPROM_MAGIC)
|
|
return -EINVAL;
|
|
|
|
/* Partial writes not supported */
|
|
if ((eeprom->offset & 3) || (eeprom->len & 3))
|
|
return -EINVAL;
|
|
|
|
return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
|
|
}
|
|
|
|
static u32 sky2_fix_features(struct net_device *dev, u32 features)
|
|
{
|
|
const struct sky2_port *sky2 = netdev_priv(dev);
|
|
const struct sky2_hw *hw = sky2->hw;
|
|
|
|
/* In order to do Jumbo packets on these chips, need to turn off the
|
|
* transmit store/forward. Therefore checksum offload won't work.
|
|
*/
|
|
if (dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U)
|
|
features &= ~(NETIF_F_TSO|NETIF_F_SG|NETIF_F_ALL_CSUM);
|
|
|
|
return features;
|
|
}
|
|
|
|
static int sky2_set_features(struct net_device *dev, u32 features)
|
|
{
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
u32 changed = dev->features ^ features;
|
|
|
|
if (changed & NETIF_F_RXCSUM) {
|
|
u32 on = features & NETIF_F_RXCSUM;
|
|
sky2_write32(sky2->hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
|
|
on ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
|
|
}
|
|
|
|
if (changed & NETIF_F_RXHASH)
|
|
rx_set_rss(dev, features);
|
|
|
|
if (changed & (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX))
|
|
sky2_vlan_mode(dev, features);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops sky2_ethtool_ops = {
|
|
.get_settings = sky2_get_settings,
|
|
.set_settings = sky2_set_settings,
|
|
.get_drvinfo = sky2_get_drvinfo,
|
|
.get_wol = sky2_get_wol,
|
|
.set_wol = sky2_set_wol,
|
|
.get_msglevel = sky2_get_msglevel,
|
|
.set_msglevel = sky2_set_msglevel,
|
|
.nway_reset = sky2_nway_reset,
|
|
.get_regs_len = sky2_get_regs_len,
|
|
.get_regs = sky2_get_regs,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = sky2_get_eeprom_len,
|
|
.get_eeprom = sky2_get_eeprom,
|
|
.set_eeprom = sky2_set_eeprom,
|
|
.get_strings = sky2_get_strings,
|
|
.get_coalesce = sky2_get_coalesce,
|
|
.set_coalesce = sky2_set_coalesce,
|
|
.get_ringparam = sky2_get_ringparam,
|
|
.set_ringparam = sky2_set_ringparam,
|
|
.get_pauseparam = sky2_get_pauseparam,
|
|
.set_pauseparam = sky2_set_pauseparam,
|
|
.set_phys_id = sky2_set_phys_id,
|
|
.get_sset_count = sky2_get_sset_count,
|
|
.get_ethtool_stats = sky2_get_ethtool_stats,
|
|
};
|
|
|
|
#ifdef CONFIG_SKY2_DEBUG
|
|
|
|
static struct dentry *sky2_debug;
|
|
|
|
|
|
/*
|
|
* Read and parse the first part of Vital Product Data
|
|
*/
|
|
#define VPD_SIZE 128
|
|
#define VPD_MAGIC 0x82
|
|
|
|
static const struct vpd_tag {
|
|
char tag[2];
|
|
char *label;
|
|
} vpd_tags[] = {
|
|
{ "PN", "Part Number" },
|
|
{ "EC", "Engineering Level" },
|
|
{ "MN", "Manufacturer" },
|
|
{ "SN", "Serial Number" },
|
|
{ "YA", "Asset Tag" },
|
|
{ "VL", "First Error Log Message" },
|
|
{ "VF", "Second Error Log Message" },
|
|
{ "VB", "Boot Agent ROM Configuration" },
|
|
{ "VE", "EFI UNDI Configuration" },
|
|
};
|
|
|
|
static void sky2_show_vpd(struct seq_file *seq, struct sky2_hw *hw)
|
|
{
|
|
size_t vpd_size;
|
|
loff_t offs;
|
|
u8 len;
|
|
unsigned char *buf;
|
|
u16 reg2;
|
|
|
|
reg2 = sky2_pci_read16(hw, PCI_DEV_REG2);
|
|
vpd_size = 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
|
|
|
|
seq_printf(seq, "%s Product Data\n", pci_name(hw->pdev));
|
|
buf = kmalloc(vpd_size, GFP_KERNEL);
|
|
if (!buf) {
|
|
seq_puts(seq, "no memory!\n");
|
|
return;
|
|
}
|
|
|
|
if (pci_read_vpd(hw->pdev, 0, vpd_size, buf) < 0) {
|
|
seq_puts(seq, "VPD read failed\n");
|
|
goto out;
|
|
}
|
|
|
|
if (buf[0] != VPD_MAGIC) {
|
|
seq_printf(seq, "VPD tag mismatch: %#x\n", buf[0]);
|
|
goto out;
|
|
}
|
|
len = buf[1];
|
|
if (len == 0 || len > vpd_size - 4) {
|
|
seq_printf(seq, "Invalid id length: %d\n", len);
|
|
goto out;
|
|
}
|
|
|
|
seq_printf(seq, "%.*s\n", len, buf + 3);
|
|
offs = len + 3;
|
|
|
|
while (offs < vpd_size - 4) {
|
|
int i;
|
|
|
|
if (!memcmp("RW", buf + offs, 2)) /* end marker */
|
|
break;
|
|
len = buf[offs + 2];
|
|
if (offs + len + 3 >= vpd_size)
|
|
break;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vpd_tags); i++) {
|
|
if (!memcmp(vpd_tags[i].tag, buf + offs, 2)) {
|
|
seq_printf(seq, " %s: %.*s\n",
|
|
vpd_tags[i].label, len, buf + offs + 3);
|
|
break;
|
|
}
|
|
}
|
|
offs += len + 3;
|
|
}
|
|
out:
|
|
kfree(buf);
|
|
}
|
|
|
|
static int sky2_debug_show(struct seq_file *seq, void *v)
|
|
{
|
|
struct net_device *dev = seq->private;
|
|
const struct sky2_port *sky2 = netdev_priv(dev);
|
|
struct sky2_hw *hw = sky2->hw;
|
|
unsigned port = sky2->port;
|
|
unsigned idx, last;
|
|
int sop;
|
|
|
|
sky2_show_vpd(seq, hw);
|
|
|
|
seq_printf(seq, "\nIRQ src=%x mask=%x control=%x\n",
|
|
sky2_read32(hw, B0_ISRC),
|
|
sky2_read32(hw, B0_IMSK),
|
|
sky2_read32(hw, B0_Y2_SP_ICR));
|
|
|
|
if (!netif_running(dev)) {
|
|
seq_printf(seq, "network not running\n");
|
|
return 0;
|
|
}
|
|
|
|
napi_disable(&hw->napi);
|
|
last = sky2_read16(hw, STAT_PUT_IDX);
|
|
|
|
seq_printf(seq, "Status ring %u\n", hw->st_size);
|
|
if (hw->st_idx == last)
|
|
seq_puts(seq, "Status ring (empty)\n");
|
|
else {
|
|
seq_puts(seq, "Status ring\n");
|
|
for (idx = hw->st_idx; idx != last && idx < hw->st_size;
|
|
idx = RING_NEXT(idx, hw->st_size)) {
|
|
const struct sky2_status_le *le = hw->st_le + idx;
|
|
seq_printf(seq, "[%d] %#x %d %#x\n",
|
|
idx, le->opcode, le->length, le->status);
|
|
}
|
|
seq_puts(seq, "\n");
|
|
}
|
|
|
|
seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
|
|
sky2->tx_cons, sky2->tx_prod,
|
|
sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
|
|
sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
|
|
|
|
/* Dump contents of tx ring */
|
|
sop = 1;
|
|
for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size;
|
|
idx = RING_NEXT(idx, sky2->tx_ring_size)) {
|
|
const struct sky2_tx_le *le = sky2->tx_le + idx;
|
|
u32 a = le32_to_cpu(le->addr);
|
|
|
|
if (sop)
|
|
seq_printf(seq, "%u:", idx);
|
|
sop = 0;
|
|
|
|
switch (le->opcode & ~HW_OWNER) {
|
|
case OP_ADDR64:
|
|
seq_printf(seq, " %#x:", a);
|
|
break;
|
|
case OP_LRGLEN:
|
|
seq_printf(seq, " mtu=%d", a);
|
|
break;
|
|
case OP_VLAN:
|
|
seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
|
|
break;
|
|
case OP_TCPLISW:
|
|
seq_printf(seq, " csum=%#x", a);
|
|
break;
|
|
case OP_LARGESEND:
|
|
seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
|
|
break;
|
|
case OP_PACKET:
|
|
seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
|
|
break;
|
|
case OP_BUFFER:
|
|
seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
|
|
break;
|
|
default:
|
|
seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
|
|
a, le16_to_cpu(le->length));
|
|
}
|
|
|
|
if (le->ctrl & EOP) {
|
|
seq_putc(seq, '\n');
|
|
sop = 1;
|
|
}
|
|
}
|
|
|
|
seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
|
|
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
|
|
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
|
|
sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
|
|
|
|
sky2_read32(hw, B0_Y2_SP_LISR);
|
|
napi_enable(&hw->napi);
|
|
return 0;
|
|
}
|
|
|
|
static int sky2_debug_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, sky2_debug_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations sky2_debug_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = sky2_debug_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
/*
|
|
* Use network device events to create/remove/rename
|
|
* debugfs file entries
|
|
*/
|
|
static int sky2_device_event(struct notifier_block *unused,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct net_device *dev = ptr;
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
|
|
return NOTIFY_DONE;
|
|
|
|
switch (event) {
|
|
case NETDEV_CHANGENAME:
|
|
if (sky2->debugfs) {
|
|
sky2->debugfs = debugfs_rename(sky2_debug, sky2->debugfs,
|
|
sky2_debug, dev->name);
|
|
}
|
|
break;
|
|
|
|
case NETDEV_GOING_DOWN:
|
|
if (sky2->debugfs) {
|
|
netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
|
|
debugfs_remove(sky2->debugfs);
|
|
sky2->debugfs = NULL;
|
|
}
|
|
break;
|
|
|
|
case NETDEV_UP:
|
|
sky2->debugfs = debugfs_create_file(dev->name, S_IRUGO,
|
|
sky2_debug, dev,
|
|
&sky2_debug_fops);
|
|
if (IS_ERR(sky2->debugfs))
|
|
sky2->debugfs = NULL;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block sky2_notifier = {
|
|
.notifier_call = sky2_device_event,
|
|
};
|
|
|
|
|
|
static __init void sky2_debug_init(void)
|
|
{
|
|
struct dentry *ent;
|
|
|
|
ent = debugfs_create_dir("sky2", NULL);
|
|
if (!ent || IS_ERR(ent))
|
|
return;
|
|
|
|
sky2_debug = ent;
|
|
register_netdevice_notifier(&sky2_notifier);
|
|
}
|
|
|
|
static __exit void sky2_debug_cleanup(void)
|
|
{
|
|
if (sky2_debug) {
|
|
unregister_netdevice_notifier(&sky2_notifier);
|
|
debugfs_remove(sky2_debug);
|
|
sky2_debug = NULL;
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define sky2_debug_init()
|
|
#define sky2_debug_cleanup()
|
|
#endif
|
|
|
|
/* Two copies of network device operations to handle special case of
|
|
not allowing netpoll on second port */
|
|
static const struct net_device_ops sky2_netdev_ops[2] = {
|
|
{
|
|
.ndo_open = sky2_up,
|
|
.ndo_stop = sky2_down,
|
|
.ndo_start_xmit = sky2_xmit_frame,
|
|
.ndo_do_ioctl = sky2_ioctl,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = sky2_set_mac_address,
|
|
.ndo_set_multicast_list = sky2_set_multicast,
|
|
.ndo_change_mtu = sky2_change_mtu,
|
|
.ndo_fix_features = sky2_fix_features,
|
|
.ndo_set_features = sky2_set_features,
|
|
.ndo_tx_timeout = sky2_tx_timeout,
|
|
.ndo_get_stats64 = sky2_get_stats,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = sky2_netpoll,
|
|
#endif
|
|
},
|
|
{
|
|
.ndo_open = sky2_up,
|
|
.ndo_stop = sky2_down,
|
|
.ndo_start_xmit = sky2_xmit_frame,
|
|
.ndo_do_ioctl = sky2_ioctl,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = sky2_set_mac_address,
|
|
.ndo_set_multicast_list = sky2_set_multicast,
|
|
.ndo_change_mtu = sky2_change_mtu,
|
|
.ndo_fix_features = sky2_fix_features,
|
|
.ndo_set_features = sky2_set_features,
|
|
.ndo_tx_timeout = sky2_tx_timeout,
|
|
.ndo_get_stats64 = sky2_get_stats,
|
|
},
|
|
};
|
|
|
|
/* Initialize network device */
|
|
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
|
|
unsigned port,
|
|
int highmem, int wol)
|
|
{
|
|
struct sky2_port *sky2;
|
|
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
|
|
|
|
if (!dev) {
|
|
dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
SET_NETDEV_DEV(dev, &hw->pdev->dev);
|
|
dev->irq = hw->pdev->irq;
|
|
SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
|
|
dev->watchdog_timeo = TX_WATCHDOG;
|
|
dev->netdev_ops = &sky2_netdev_ops[port];
|
|
|
|
sky2 = netdev_priv(dev);
|
|
sky2->netdev = dev;
|
|
sky2->hw = hw;
|
|
sky2->msg_enable = netif_msg_init(debug, default_msg);
|
|
|
|
/* Auto speed and flow control */
|
|
sky2->flags = SKY2_FLAG_AUTO_SPEED | SKY2_FLAG_AUTO_PAUSE;
|
|
if (hw->chip_id != CHIP_ID_YUKON_XL)
|
|
dev->hw_features |= NETIF_F_RXCSUM;
|
|
|
|
sky2->flow_mode = FC_BOTH;
|
|
|
|
sky2->duplex = -1;
|
|
sky2->speed = -1;
|
|
sky2->advertising = sky2_supported_modes(hw);
|
|
sky2->wol = wol;
|
|
|
|
spin_lock_init(&sky2->phy_lock);
|
|
|
|
sky2->tx_pending = TX_DEF_PENDING;
|
|
sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1);
|
|
sky2->rx_pending = RX_DEF_PENDING;
|
|
|
|
hw->dev[port] = dev;
|
|
|
|
sky2->port = port;
|
|
|
|
dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
|
|
|
|
if (highmem)
|
|
dev->features |= NETIF_F_HIGHDMA;
|
|
|
|
/* Enable receive hashing unless hardware is known broken */
|
|
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
|
|
dev->hw_features |= NETIF_F_RXHASH;
|
|
|
|
if (!(hw->flags & SKY2_HW_VLAN_BROKEN)) {
|
|
dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
dev->vlan_features |= SKY2_VLAN_OFFLOADS;
|
|
}
|
|
|
|
dev->features |= dev->hw_features;
|
|
|
|
/* read the mac address */
|
|
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
|
|
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
|
|
|
|
return dev;
|
|
}
|
|
|
|
static void __devinit sky2_show_addr(struct net_device *dev)
|
|
{
|
|
const struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
netif_info(sky2, probe, dev, "addr %pM\n", dev->dev_addr);
|
|
}
|
|
|
|
/* Handle software interrupt used during MSI test */
|
|
static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id)
|
|
{
|
|
struct sky2_hw *hw = dev_id;
|
|
u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
|
|
|
|
if (status == 0)
|
|
return IRQ_NONE;
|
|
|
|
if (status & Y2_IS_IRQ_SW) {
|
|
hw->flags |= SKY2_HW_USE_MSI;
|
|
wake_up(&hw->msi_wait);
|
|
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
|
|
}
|
|
sky2_write32(hw, B0_Y2_SP_ICR, 2);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Test interrupt path by forcing a a software IRQ */
|
|
static int __devinit sky2_test_msi(struct sky2_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->pdev;
|
|
int err;
|
|
|
|
init_waitqueue_head(&hw->msi_wait);
|
|
|
|
sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
|
|
|
|
err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
|
|
return err;
|
|
}
|
|
|
|
sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
|
|
sky2_read8(hw, B0_CTST);
|
|
|
|
wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10);
|
|
|
|
if (!(hw->flags & SKY2_HW_USE_MSI)) {
|
|
/* MSI test failed, go back to INTx mode */
|
|
dev_info(&pdev->dev, "No interrupt generated using MSI, "
|
|
"switching to INTx mode.\n");
|
|
|
|
err = -EOPNOTSUPP;
|
|
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
|
|
}
|
|
|
|
sky2_write32(hw, B0_IMSK, 0);
|
|
sky2_read32(hw, B0_IMSK);
|
|
|
|
free_irq(pdev->irq, hw);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* This driver supports yukon2 chipset only */
|
|
static const char *sky2_name(u8 chipid, char *buf, int sz)
|
|
{
|
|
const char *name[] = {
|
|
"XL", /* 0xb3 */
|
|
"EC Ultra", /* 0xb4 */
|
|
"Extreme", /* 0xb5 */
|
|
"EC", /* 0xb6 */
|
|
"FE", /* 0xb7 */
|
|
"FE+", /* 0xb8 */
|
|
"Supreme", /* 0xb9 */
|
|
"UL 2", /* 0xba */
|
|
"Unknown", /* 0xbb */
|
|
"Optima", /* 0xbc */
|
|
};
|
|
|
|
if (chipid >= CHIP_ID_YUKON_XL && chipid <= CHIP_ID_YUKON_OPT)
|
|
strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
|
|
else
|
|
snprintf(buf, sz, "(chip %#x)", chipid);
|
|
return buf;
|
|
}
|
|
|
|
static int __devinit sky2_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
struct sky2_hw *hw;
|
|
int err, using_dac = 0, wol_default;
|
|
u32 reg;
|
|
char buf1[16];
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot enable PCI device\n");
|
|
goto err_out;
|
|
}
|
|
|
|
/* Get configuration information
|
|
* Note: only regular PCI config access once to test for HW issues
|
|
* other PCI access through shared memory for speed and to
|
|
* avoid MMCONFIG problems.
|
|
*/
|
|
err = pci_read_config_dword(pdev, PCI_DEV_REG2, ®);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "PCI read config failed\n");
|
|
goto err_out;
|
|
}
|
|
|
|
if (~reg == 0) {
|
|
dev_err(&pdev->dev, "PCI configuration read error\n");
|
|
goto err_out;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_NAME);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
|
|
goto err_out_disable;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
if (sizeof(dma_addr_t) > sizeof(u32) &&
|
|
!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))) {
|
|
using_dac = 1;
|
|
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
|
|
if (err < 0) {
|
|
dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
|
|
"for consistent allocations\n");
|
|
goto err_out_free_regions;
|
|
}
|
|
} else {
|
|
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (err) {
|
|
dev_err(&pdev->dev, "no usable DMA configuration\n");
|
|
goto err_out_free_regions;
|
|
}
|
|
}
|
|
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
/* The sk98lin vendor driver uses hardware byte swapping but
|
|
* this driver uses software swapping.
|
|
*/
|
|
reg &= ~PCI_REV_DESC;
|
|
err = pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "PCI write config failed\n");
|
|
goto err_out_free_regions;
|
|
}
|
|
#endif
|
|
|
|
wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
|
|
|
|
err = -ENOMEM;
|
|
|
|
hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
|
|
+ strlen(pci_name(pdev)) + 1, GFP_KERNEL);
|
|
if (!hw) {
|
|
dev_err(&pdev->dev, "cannot allocate hardware struct\n");
|
|
goto err_out_free_regions;
|
|
}
|
|
|
|
hw->pdev = pdev;
|
|
sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
|
|
|
|
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
|
|
if (!hw->regs) {
|
|
dev_err(&pdev->dev, "cannot map device registers\n");
|
|
goto err_out_free_hw;
|
|
}
|
|
|
|
err = sky2_init(hw);
|
|
if (err)
|
|
goto err_out_iounmap;
|
|
|
|
/* ring for status responses */
|
|
hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
|
|
hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
|
|
&hw->st_dma);
|
|
if (!hw->st_le)
|
|
goto err_out_reset;
|
|
|
|
dev_info(&pdev->dev, "Yukon-2 %s chip revision %d\n",
|
|
sky2_name(hw->chip_id, buf1, sizeof(buf1)), hw->chip_rev);
|
|
|
|
sky2_reset(hw);
|
|
|
|
dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto err_out_free_pci;
|
|
}
|
|
|
|
if (!disable_msi && pci_enable_msi(pdev) == 0) {
|
|
err = sky2_test_msi(hw);
|
|
if (err == -EOPNOTSUPP)
|
|
pci_disable_msi(pdev);
|
|
else if (err)
|
|
goto err_out_free_netdev;
|
|
}
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot register net device\n");
|
|
goto err_out_free_netdev;
|
|
}
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
|
|
|
|
err = request_irq(pdev->irq, sky2_intr,
|
|
(hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
|
|
hw->irq_name, hw);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
|
|
goto err_out_unregister;
|
|
}
|
|
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
|
|
napi_enable(&hw->napi);
|
|
|
|
sky2_show_addr(dev);
|
|
|
|
if (hw->ports > 1) {
|
|
struct net_device *dev1;
|
|
|
|
err = -ENOMEM;
|
|
dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
|
|
if (dev1 && (err = register_netdev(dev1)) == 0)
|
|
sky2_show_addr(dev1);
|
|
else {
|
|
dev_warn(&pdev->dev,
|
|
"register of second port failed (%d)\n", err);
|
|
hw->dev[1] = NULL;
|
|
hw->ports = 1;
|
|
if (dev1)
|
|
free_netdev(dev1);
|
|
}
|
|
}
|
|
|
|
setup_timer(&hw->watchdog_timer, sky2_watchdog, (unsigned long) hw);
|
|
INIT_WORK(&hw->restart_work, sky2_restart);
|
|
|
|
pci_set_drvdata(pdev, hw);
|
|
pdev->d3_delay = 150;
|
|
|
|
return 0;
|
|
|
|
err_out_unregister:
|
|
if (hw->flags & SKY2_HW_USE_MSI)
|
|
pci_disable_msi(pdev);
|
|
unregister_netdev(dev);
|
|
err_out_free_netdev:
|
|
free_netdev(dev);
|
|
err_out_free_pci:
|
|
pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
|
|
hw->st_le, hw->st_dma);
|
|
err_out_reset:
|
|
sky2_write8(hw, B0_CTST, CS_RST_SET);
|
|
err_out_iounmap:
|
|
iounmap(hw->regs);
|
|
err_out_free_hw:
|
|
kfree(hw);
|
|
err_out_free_regions:
|
|
pci_release_regions(pdev);
|
|
err_out_disable:
|
|
pci_disable_device(pdev);
|
|
err_out:
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit sky2_remove(struct pci_dev *pdev)
|
|
{
|
|
struct sky2_hw *hw = pci_get_drvdata(pdev);
|
|
int i;
|
|
|
|
if (!hw)
|
|
return;
|
|
|
|
del_timer_sync(&hw->watchdog_timer);
|
|
cancel_work_sync(&hw->restart_work);
|
|
|
|
for (i = hw->ports-1; i >= 0; --i)
|
|
unregister_netdev(hw->dev[i]);
|
|
|
|
sky2_write32(hw, B0_IMSK, 0);
|
|
|
|
sky2_power_aux(hw);
|
|
|
|
sky2_write8(hw, B0_CTST, CS_RST_SET);
|
|
sky2_read8(hw, B0_CTST);
|
|
|
|
free_irq(pdev->irq, hw);
|
|
if (hw->flags & SKY2_HW_USE_MSI)
|
|
pci_disable_msi(pdev);
|
|
pci_free_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
|
|
hw->st_le, hw->st_dma);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
|
|
for (i = hw->ports-1; i >= 0; --i)
|
|
free_netdev(hw->dev[i]);
|
|
|
|
iounmap(hw->regs);
|
|
kfree(hw);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static int sky2_suspend(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct sky2_hw *hw = pci_get_drvdata(pdev);
|
|
int i;
|
|
|
|
if (!hw)
|
|
return 0;
|
|
|
|
del_timer_sync(&hw->watchdog_timer);
|
|
cancel_work_sync(&hw->restart_work);
|
|
|
|
rtnl_lock();
|
|
|
|
sky2_all_down(hw);
|
|
for (i = 0; i < hw->ports; i++) {
|
|
struct net_device *dev = hw->dev[i];
|
|
struct sky2_port *sky2 = netdev_priv(dev);
|
|
|
|
if (sky2->wol)
|
|
sky2_wol_init(sky2);
|
|
}
|
|
|
|
sky2_power_aux(hw);
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sky2_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct sky2_hw *hw = pci_get_drvdata(pdev);
|
|
int err;
|
|
|
|
if (!hw)
|
|
return 0;
|
|
|
|
/* Re-enable all clocks */
|
|
err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "PCI write config failed\n");
|
|
goto out;
|
|
}
|
|
|
|
rtnl_lock();
|
|
sky2_reset(hw);
|
|
sky2_all_up(hw);
|
|
rtnl_unlock();
|
|
|
|
return 0;
|
|
out:
|
|
|
|
dev_err(&pdev->dev, "resume failed (%d)\n", err);
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
|
|
#define SKY2_PM_OPS (&sky2_pm_ops)
|
|
|
|
#else
|
|
|
|
#define SKY2_PM_OPS NULL
|
|
#endif
|
|
|
|
static void sky2_shutdown(struct pci_dev *pdev)
|
|
{
|
|
sky2_suspend(&pdev->dev);
|
|
pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
|
|
static struct pci_driver sky2_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sky2_id_table,
|
|
.probe = sky2_probe,
|
|
.remove = __devexit_p(sky2_remove),
|
|
.shutdown = sky2_shutdown,
|
|
.driver.pm = SKY2_PM_OPS,
|
|
};
|
|
|
|
static int __init sky2_init_module(void)
|
|
{
|
|
pr_info("driver version " DRV_VERSION "\n");
|
|
|
|
sky2_debug_init();
|
|
return pci_register_driver(&sky2_driver);
|
|
}
|
|
|
|
static void __exit sky2_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&sky2_driver);
|
|
sky2_debug_cleanup();
|
|
}
|
|
|
|
module_init(sky2_init_module);
|
|
module_exit(sky2_cleanup_module);
|
|
|
|
MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
|
|
MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|