1405 lines
38 KiB
C
1405 lines
38 KiB
C
/**
|
|
* Copyright (C) 2005 - 2015 Emulex
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation. The full GNU General
|
|
* Public License is included in this distribution in the file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* linux-drivers@avagotech.com
|
|
*
|
|
* Emulex
|
|
* 3333 Susan Street
|
|
* Costa Mesa, CA 92626
|
|
*/
|
|
|
|
#include <scsi/iscsi_proto.h>
|
|
|
|
#include "be_main.h"
|
|
#include "be.h"
|
|
#include "be_mgmt.h"
|
|
|
|
int beiscsi_pci_soft_reset(struct beiscsi_hba *phba)
|
|
{
|
|
u32 sreset;
|
|
u8 *pci_reset_offset = 0;
|
|
u8 *pci_online0_offset = 0;
|
|
u8 *pci_online1_offset = 0;
|
|
u32 pconline0 = 0;
|
|
u32 pconline1 = 0;
|
|
u32 i;
|
|
|
|
pci_reset_offset = (u8 *)phba->pci_va + BE2_SOFT_RESET;
|
|
pci_online0_offset = (u8 *)phba->pci_va + BE2_PCI_ONLINE0;
|
|
pci_online1_offset = (u8 *)phba->pci_va + BE2_PCI_ONLINE1;
|
|
sreset = readl((void *)pci_reset_offset);
|
|
sreset |= BE2_SET_RESET;
|
|
writel(sreset, (void *)pci_reset_offset);
|
|
|
|
i = 0;
|
|
while (sreset & BE2_SET_RESET) {
|
|
if (i > 64)
|
|
break;
|
|
msleep(100);
|
|
sreset = readl((void *)pci_reset_offset);
|
|
i++;
|
|
}
|
|
|
|
if (sreset & BE2_SET_RESET) {
|
|
printk(KERN_ERR DRV_NAME
|
|
" Soft Reset did not deassert\n");
|
|
return -EIO;
|
|
}
|
|
pconline1 = BE2_MPU_IRAM_ONLINE;
|
|
writel(pconline0, (void *)pci_online0_offset);
|
|
writel(pconline1, (void *)pci_online1_offset);
|
|
|
|
sreset |= BE2_SET_RESET;
|
|
writel(sreset, (void *)pci_reset_offset);
|
|
|
|
i = 0;
|
|
while (sreset & BE2_SET_RESET) {
|
|
if (i > 64)
|
|
break;
|
|
msleep(1);
|
|
sreset = readl((void *)pci_reset_offset);
|
|
i++;
|
|
}
|
|
if (sreset & BE2_SET_RESET) {
|
|
printk(KERN_ERR DRV_NAME
|
|
" MPU Online Soft Reset did not deassert\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int be_chk_reset_complete(struct beiscsi_hba *phba)
|
|
{
|
|
unsigned int num_loop;
|
|
u8 *mpu_sem = 0;
|
|
u32 status;
|
|
|
|
num_loop = 1000;
|
|
mpu_sem = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE;
|
|
msleep(5000);
|
|
|
|
while (num_loop) {
|
|
status = readl((void *)mpu_sem);
|
|
|
|
if ((status & 0x80000000) || (status & 0x0000FFFF) == 0xC000)
|
|
break;
|
|
msleep(60);
|
|
num_loop--;
|
|
}
|
|
|
|
if ((status & 0x80000000) || (!num_loop)) {
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
|
|
"BC_%d : Failed in be_chk_reset_complete"
|
|
"status = 0x%x\n", status);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned int alloc_mcc_tag(struct beiscsi_hba *phba)
|
|
{
|
|
unsigned int tag = 0;
|
|
|
|
spin_lock(&phba->ctrl.mcc_lock);
|
|
if (phba->ctrl.mcc_tag_available) {
|
|
tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index];
|
|
phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0;
|
|
phba->ctrl.mcc_tag_status[tag] = 0;
|
|
phba->ctrl.ptag_state[tag].tag_state = 0;
|
|
}
|
|
if (tag) {
|
|
phba->ctrl.mcc_tag_available--;
|
|
if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1))
|
|
phba->ctrl.mcc_alloc_index = 0;
|
|
else
|
|
phba->ctrl.mcc_alloc_index++;
|
|
}
|
|
spin_unlock(&phba->ctrl.mcc_lock);
|
|
return tag;
|
|
}
|
|
|
|
struct be_mcc_wrb *alloc_mcc_wrb(struct beiscsi_hba *phba,
|
|
unsigned int *ref_tag)
|
|
{
|
|
struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
|
|
struct be_mcc_wrb *wrb = NULL;
|
|
unsigned int tag;
|
|
|
|
spin_lock_bh(&phba->ctrl.mcc_lock);
|
|
if (mccq->used == mccq->len) {
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT |
|
|
BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : MCC queue full: WRB used %u tag avail %u\n",
|
|
mccq->used, phba->ctrl.mcc_tag_available);
|
|
goto alloc_failed;
|
|
}
|
|
|
|
if (!phba->ctrl.mcc_tag_available)
|
|
goto alloc_failed;
|
|
|
|
tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index];
|
|
if (!tag) {
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT |
|
|
BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : MCC tag 0 allocated: tag avail %u alloc index %u\n",
|
|
phba->ctrl.mcc_tag_available,
|
|
phba->ctrl.mcc_alloc_index);
|
|
goto alloc_failed;
|
|
}
|
|
|
|
/* return this tag for further reference */
|
|
*ref_tag = tag;
|
|
phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0;
|
|
phba->ctrl.mcc_tag_status[tag] = 0;
|
|
phba->ctrl.ptag_state[tag].tag_state = 0;
|
|
phba->ctrl.mcc_tag_available--;
|
|
if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1))
|
|
phba->ctrl.mcc_alloc_index = 0;
|
|
else
|
|
phba->ctrl.mcc_alloc_index++;
|
|
|
|
wrb = queue_head_node(mccq);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
wrb->tag0 = tag;
|
|
wrb->tag0 |= (mccq->head << MCC_Q_WRB_IDX_SHIFT) & MCC_Q_WRB_IDX_MASK;
|
|
queue_head_inc(mccq);
|
|
mccq->used++;
|
|
|
|
alloc_failed:
|
|
spin_unlock_bh(&phba->ctrl.mcc_lock);
|
|
return wrb;
|
|
}
|
|
|
|
void free_mcc_wrb(struct be_ctrl_info *ctrl, unsigned int tag)
|
|
{
|
|
struct be_queue_info *mccq = &ctrl->mcc_obj.q;
|
|
|
|
spin_lock_bh(&ctrl->mcc_lock);
|
|
tag = tag & MCC_Q_CMD_TAG_MASK;
|
|
ctrl->mcc_tag[ctrl->mcc_free_index] = tag;
|
|
if (ctrl->mcc_free_index == (MAX_MCC_CMD - 1))
|
|
ctrl->mcc_free_index = 0;
|
|
else
|
|
ctrl->mcc_free_index++;
|
|
ctrl->mcc_tag_available++;
|
|
mccq->used--;
|
|
spin_unlock_bh(&ctrl->mcc_lock);
|
|
}
|
|
|
|
/**
|
|
* beiscsi_fail_session(): Closing session with appropriate error
|
|
* @cls_session: ptr to session
|
|
**/
|
|
void beiscsi_fail_session(struct iscsi_cls_session *cls_session)
|
|
{
|
|
iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
|
|
}
|
|
|
|
/*
|
|
* beiscsi_mccq_compl_wait()- Process completion in MCC CQ
|
|
* @phba: Driver private structure
|
|
* @tag: Tag for the MBX Command
|
|
* @wrb: the WRB used for the MBX Command
|
|
* @mbx_cmd_mem: ptr to memory allocated for MBX Cmd
|
|
*
|
|
* Waits for MBX completion with the passed TAG.
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero
|
|
**/
|
|
int beiscsi_mccq_compl_wait(struct beiscsi_hba *phba,
|
|
uint32_t tag, struct be_mcc_wrb **wrb,
|
|
struct be_dma_mem *mbx_cmd_mem)
|
|
{
|
|
int rc = 0;
|
|
uint32_t mcc_tag_status;
|
|
uint16_t status = 0, addl_status = 0, wrb_num = 0;
|
|
struct be_mcc_wrb *temp_wrb;
|
|
struct be_cmd_req_hdr *mbx_hdr;
|
|
struct be_cmd_resp_hdr *mbx_resp_hdr;
|
|
struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
|
|
|
|
if (beiscsi_error(phba))
|
|
return -EPERM;
|
|
|
|
/* wait for the mccq completion */
|
|
rc = wait_event_interruptible_timeout(
|
|
phba->ctrl.mcc_wait[tag],
|
|
phba->ctrl.mcc_tag_status[tag],
|
|
msecs_to_jiffies(
|
|
BEISCSI_HOST_MBX_TIMEOUT));
|
|
/**
|
|
* If MBOX cmd timeout expired, tag and resource allocated
|
|
* for cmd is not freed until FW returns completion.
|
|
*/
|
|
if (rc <= 0) {
|
|
struct be_dma_mem *tag_mem;
|
|
|
|
/**
|
|
* PCI/DMA memory allocated and posted in non-embedded mode
|
|
* will have mbx_cmd_mem != NULL.
|
|
* Save virtual and bus addresses for the command so that it
|
|
* can be freed later.
|
|
**/
|
|
tag_mem = &phba->ctrl.ptag_state[tag].tag_mem_state;
|
|
if (mbx_cmd_mem) {
|
|
tag_mem->size = mbx_cmd_mem->size;
|
|
tag_mem->va = mbx_cmd_mem->va;
|
|
tag_mem->dma = mbx_cmd_mem->dma;
|
|
} else
|
|
tag_mem->size = 0;
|
|
|
|
/* first make tag_mem_state visible to all */
|
|
wmb();
|
|
set_bit(MCC_TAG_STATE_TIMEOUT,
|
|
&phba->ctrl.ptag_state[tag].tag_state);
|
|
|
|
beiscsi_log(phba, KERN_ERR,
|
|
BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
|
|
BEISCSI_LOG_CONFIG,
|
|
"BC_%d : MBX Cmd Completion timed out\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
rc = 0;
|
|
mcc_tag_status = phba->ctrl.mcc_tag_status[tag];
|
|
status = (mcc_tag_status & CQE_STATUS_MASK);
|
|
addl_status = ((mcc_tag_status & CQE_STATUS_ADDL_MASK) >>
|
|
CQE_STATUS_ADDL_SHIFT);
|
|
|
|
if (mbx_cmd_mem) {
|
|
mbx_hdr = (struct be_cmd_req_hdr *)mbx_cmd_mem->va;
|
|
} else {
|
|
wrb_num = (mcc_tag_status & CQE_STATUS_WRB_MASK) >>
|
|
CQE_STATUS_WRB_SHIFT;
|
|
temp_wrb = (struct be_mcc_wrb *)queue_get_wrb(mccq, wrb_num);
|
|
mbx_hdr = embedded_payload(temp_wrb);
|
|
|
|
if (wrb)
|
|
*wrb = temp_wrb;
|
|
}
|
|
|
|
if (status || addl_status) {
|
|
beiscsi_log(phba, KERN_WARNING,
|
|
BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
|
|
BEISCSI_LOG_CONFIG,
|
|
"BC_%d : MBX Cmd Failed for "
|
|
"Subsys : %d Opcode : %d with "
|
|
"Status : %d and Extd_Status : %d\n",
|
|
mbx_hdr->subsystem,
|
|
mbx_hdr->opcode,
|
|
status, addl_status);
|
|
rc = -EIO;
|
|
if (status == MCC_STATUS_INSUFFICIENT_BUFFER) {
|
|
mbx_resp_hdr = (struct be_cmd_resp_hdr *) mbx_hdr;
|
|
beiscsi_log(phba, KERN_WARNING,
|
|
BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
|
|
BEISCSI_LOG_CONFIG,
|
|
"BC_%d : Insufficient Buffer Error "
|
|
"Resp_Len : %d Actual_Resp_Len : %d\n",
|
|
mbx_resp_hdr->response_length,
|
|
mbx_resp_hdr->actual_resp_len);
|
|
rc = -EAGAIN;
|
|
}
|
|
}
|
|
|
|
free_mcc_wrb(&phba->ctrl, tag);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* beiscsi_process_mbox_compl()- Check the MBX completion status
|
|
* @ctrl: Function specific MBX data structure
|
|
* @compl: Completion status of MBX Command
|
|
*
|
|
* Check for the MBX completion status when BMBX method used
|
|
*
|
|
* return
|
|
* Success: Zero
|
|
* Failure: Non-Zero
|
|
**/
|
|
static int beiscsi_process_mbox_compl(struct be_ctrl_info *ctrl,
|
|
struct be_mcc_compl *compl)
|
|
{
|
|
u16 compl_status, extd_status;
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
struct be_cmd_req_hdr *hdr = embedded_payload(wrb);
|
|
struct be_cmd_resp_hdr *resp_hdr;
|
|
|
|
/**
|
|
* To check if valid bit is set, check the entire word as we don't know
|
|
* the endianness of the data (old entry is host endian while a new
|
|
* entry is little endian)
|
|
*/
|
|
if (!compl->flags) {
|
|
beiscsi_log(phba, KERN_ERR,
|
|
BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : BMBX busy, no completion\n");
|
|
return -EBUSY;
|
|
}
|
|
compl->flags = le32_to_cpu(compl->flags);
|
|
WARN_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0);
|
|
|
|
/**
|
|
* Just swap the status to host endian;
|
|
* mcc tag is opaquely copied from mcc_wrb.
|
|
*/
|
|
be_dws_le_to_cpu(compl, 4);
|
|
compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
|
|
CQE_STATUS_COMPL_MASK;
|
|
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
|
|
CQE_STATUS_EXTD_MASK;
|
|
/* Need to reset the entire word that houses the valid bit */
|
|
compl->flags = 0;
|
|
|
|
if (compl_status == MCC_STATUS_SUCCESS)
|
|
return 0;
|
|
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : error in cmd completion: Subsystem : %d Opcode : %d status(compl/extd)=%d/%d\n",
|
|
hdr->subsystem, hdr->opcode, compl_status, extd_status);
|
|
|
|
if (compl_status == MCC_STATUS_INSUFFICIENT_BUFFER) {
|
|
/* if status is insufficient buffer, check the length */
|
|
resp_hdr = (struct be_cmd_resp_hdr *) hdr;
|
|
if (resp_hdr->response_length)
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void beiscsi_process_async_link(struct beiscsi_hba *phba,
|
|
struct be_mcc_compl *compl)
|
|
{
|
|
struct be_async_event_link_state *evt;
|
|
|
|
evt = (struct be_async_event_link_state *)compl;
|
|
|
|
phba->port_speed = evt->port_speed;
|
|
/**
|
|
* Check logical link status in ASYNC event.
|
|
* This has been newly introduced in SKH-R Firmware 10.0.338.45.
|
|
**/
|
|
if (evt->port_link_status & BE_ASYNC_LINK_UP_MASK) {
|
|
phba->state = BE_ADAPTER_LINK_UP | BE_ADAPTER_CHECK_BOOT;
|
|
phba->get_boot = BE_GET_BOOT_RETRIES;
|
|
__beiscsi_log(phba, KERN_ERR,
|
|
"BC_%d : Link Up on Port %d tag 0x%x\n",
|
|
evt->physical_port, evt->event_tag);
|
|
} else {
|
|
phba->state = BE_ADAPTER_LINK_DOWN;
|
|
__beiscsi_log(phba, KERN_ERR,
|
|
"BC_%d : Link Down on Port %d tag 0x%x\n",
|
|
evt->physical_port, evt->event_tag);
|
|
iscsi_host_for_each_session(phba->shost,
|
|
beiscsi_fail_session);
|
|
}
|
|
}
|
|
|
|
static char *beiscsi_port_misconf_event_msg[] = {
|
|
"Physical Link is functional.",
|
|
"Optics faulted/incorrectly installed/not installed - Reseat optics, if issue not resolved, replace.",
|
|
"Optics of two types installed - Remove one optic or install matching pair of optics.",
|
|
"Incompatible optics - Replace with compatible optics for card to function.",
|
|
"Unqualified optics - Replace with Avago optics for Warranty and Technical Support.",
|
|
"Uncertified optics - Replace with Avago Certified optics to enable link operation."
|
|
};
|
|
|
|
static void beiscsi_process_async_sli(struct beiscsi_hba *phba,
|
|
struct be_mcc_compl *compl)
|
|
{
|
|
struct be_async_event_sli *async_sli;
|
|
u8 evt_type, state, old_state, le;
|
|
char *sev = KERN_WARNING;
|
|
char *msg = NULL;
|
|
|
|
evt_type = compl->flags >> ASYNC_TRAILER_EVENT_TYPE_SHIFT;
|
|
evt_type &= ASYNC_TRAILER_EVENT_TYPE_MASK;
|
|
|
|
/* processing only MISCONFIGURED physical port event */
|
|
if (evt_type != ASYNC_SLI_EVENT_TYPE_MISCONFIGURED)
|
|
return;
|
|
|
|
async_sli = (struct be_async_event_sli *)compl;
|
|
state = async_sli->event_data1 >>
|
|
(phba->fw_config.phys_port * 8) & 0xff;
|
|
le = async_sli->event_data2 >>
|
|
(phba->fw_config.phys_port * 8) & 0xff;
|
|
|
|
old_state = phba->optic_state;
|
|
phba->optic_state = state;
|
|
|
|
if (state >= ARRAY_SIZE(beiscsi_port_misconf_event_msg)) {
|
|
/* fw is reporting a state we don't know, log and return */
|
|
__beiscsi_log(phba, KERN_ERR,
|
|
"BC_%d : Port %c: Unrecognized optic state 0x%x\n",
|
|
phba->port_name, async_sli->event_data1);
|
|
return;
|
|
}
|
|
|
|
if (ASYNC_SLI_LINK_EFFECT_VALID(le)) {
|
|
/* log link effect for unqualified-4, uncertified-5 optics */
|
|
if (state > 3)
|
|
msg = (ASYNC_SLI_LINK_EFFECT_STATE(le)) ?
|
|
" Link is non-operational." :
|
|
" Link is operational.";
|
|
/* 1 - info */
|
|
if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 1)
|
|
sev = KERN_INFO;
|
|
/* 2 - error */
|
|
if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 2)
|
|
sev = KERN_ERR;
|
|
}
|
|
|
|
if (old_state != phba->optic_state)
|
|
__beiscsi_log(phba, sev, "BC_%d : Port %c: %s%s\n",
|
|
phba->port_name,
|
|
beiscsi_port_misconf_event_msg[state],
|
|
!msg ? "" : msg);
|
|
}
|
|
|
|
void beiscsi_process_async_event(struct beiscsi_hba *phba,
|
|
struct be_mcc_compl *compl)
|
|
{
|
|
char *sev = KERN_INFO;
|
|
u8 evt_code;
|
|
|
|
/* interpret flags as an async trailer */
|
|
evt_code = compl->flags >> ASYNC_TRAILER_EVENT_CODE_SHIFT;
|
|
evt_code &= ASYNC_TRAILER_EVENT_CODE_MASK;
|
|
switch (evt_code) {
|
|
case ASYNC_EVENT_CODE_LINK_STATE:
|
|
beiscsi_process_async_link(phba, compl);
|
|
break;
|
|
case ASYNC_EVENT_CODE_ISCSI:
|
|
phba->state |= BE_ADAPTER_CHECK_BOOT;
|
|
phba->get_boot = BE_GET_BOOT_RETRIES;
|
|
sev = KERN_ERR;
|
|
break;
|
|
case ASYNC_EVENT_CODE_SLI:
|
|
beiscsi_process_async_sli(phba, compl);
|
|
break;
|
|
default:
|
|
/* event not registered */
|
|
sev = KERN_ERR;
|
|
}
|
|
|
|
beiscsi_log(phba, sev, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : ASYNC Event %x: status 0x%08x flags 0x%08x\n",
|
|
evt_code, compl->status, compl->flags);
|
|
}
|
|
|
|
int beiscsi_process_mcc_compl(struct be_ctrl_info *ctrl,
|
|
struct be_mcc_compl *compl)
|
|
{
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
u16 compl_status, extd_status;
|
|
struct be_dma_mem *tag_mem;
|
|
unsigned int tag, wrb_idx;
|
|
|
|
be_dws_le_to_cpu(compl, 4);
|
|
tag = (compl->tag0 & MCC_Q_CMD_TAG_MASK);
|
|
wrb_idx = (compl->tag0 & CQE_STATUS_WRB_MASK) >> CQE_STATUS_WRB_SHIFT;
|
|
|
|
if (!test_bit(MCC_TAG_STATE_RUNNING,
|
|
&ctrl->ptag_state[tag].tag_state)) {
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_MBOX |
|
|
BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG,
|
|
"BC_%d : MBX cmd completed but not posted\n");
|
|
return 0;
|
|
}
|
|
|
|
if (test_bit(MCC_TAG_STATE_TIMEOUT, &ctrl->ptag_state[tag].tag_state)) {
|
|
beiscsi_log(phba, KERN_WARNING,
|
|
BEISCSI_LOG_MBOX | BEISCSI_LOG_INIT |
|
|
BEISCSI_LOG_CONFIG,
|
|
"BC_%d : MBX Completion for timeout Command from FW\n");
|
|
/**
|
|
* Check for the size before freeing resource.
|
|
* Only for non-embedded cmd, PCI resource is allocated.
|
|
**/
|
|
tag_mem = &ctrl->ptag_state[tag].tag_mem_state;
|
|
if (tag_mem->size)
|
|
pci_free_consistent(ctrl->pdev, tag_mem->size,
|
|
tag_mem->va, tag_mem->dma);
|
|
free_mcc_wrb(ctrl, tag);
|
|
return 0;
|
|
}
|
|
|
|
compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
|
|
CQE_STATUS_COMPL_MASK;
|
|
extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
|
|
CQE_STATUS_EXTD_MASK;
|
|
/* The ctrl.mcc_tag_status[tag] is filled with
|
|
* [31] = valid, [30:24] = Rsvd, [23:16] = wrb, [15:8] = extd_status,
|
|
* [7:0] = compl_status
|
|
*/
|
|
ctrl->mcc_tag_status[tag] = CQE_VALID_MASK;
|
|
ctrl->mcc_tag_status[tag] |= (wrb_idx << CQE_STATUS_WRB_SHIFT);
|
|
ctrl->mcc_tag_status[tag] |= (extd_status << CQE_STATUS_ADDL_SHIFT) &
|
|
CQE_STATUS_ADDL_MASK;
|
|
ctrl->mcc_tag_status[tag] |= (compl_status & CQE_STATUS_MASK);
|
|
|
|
/* write ordering forced in wake_up_interruptible */
|
|
clear_bit(MCC_TAG_STATE_RUNNING, &ctrl->ptag_state[tag].tag_state);
|
|
wake_up_interruptible(&ctrl->mcc_wait[tag]);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* be_mcc_compl_poll()- Wait for MBX completion
|
|
* @phba: driver private structure
|
|
*
|
|
* Wait till no more pending mcc requests are present
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero
|
|
*
|
|
**/
|
|
int be_mcc_compl_poll(struct beiscsi_hba *phba, unsigned int tag)
|
|
{
|
|
struct be_ctrl_info *ctrl = &phba->ctrl;
|
|
int i;
|
|
|
|
if (!test_bit(MCC_TAG_STATE_RUNNING,
|
|
&ctrl->ptag_state[tag].tag_state)) {
|
|
beiscsi_log(phba, KERN_ERR,
|
|
BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d: tag %u state not running\n", tag);
|
|
return 0;
|
|
}
|
|
for (i = 0; i < mcc_timeout; i++) {
|
|
if (beiscsi_error(phba))
|
|
return -EIO;
|
|
|
|
beiscsi_process_mcc_cq(phba);
|
|
/* after polling, wrb and tag need to be released */
|
|
if (!test_bit(MCC_TAG_STATE_RUNNING,
|
|
&ctrl->ptag_state[tag].tag_state)) {
|
|
free_mcc_wrb(ctrl, tag);
|
|
break;
|
|
}
|
|
udelay(100);
|
|
}
|
|
|
|
if (i < mcc_timeout)
|
|
return 0;
|
|
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : FW Timed Out\n");
|
|
phba->fw_timeout = true;
|
|
beiscsi_ue_detect(phba);
|
|
return -EBUSY;
|
|
}
|
|
|
|
void be_mcc_notify(struct beiscsi_hba *phba, unsigned int tag)
|
|
{
|
|
struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
|
|
u32 val = 0;
|
|
|
|
set_bit(MCC_TAG_STATE_RUNNING, &phba->ctrl.ptag_state[tag].tag_state);
|
|
val |= mccq->id & DB_MCCQ_RING_ID_MASK;
|
|
val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
|
|
/* make request available for DMA */
|
|
wmb();
|
|
iowrite32(val, phba->db_va + DB_MCCQ_OFFSET);
|
|
}
|
|
|
|
/*
|
|
* be_mbox_db_ready_poll()- Check ready status
|
|
* @ctrl: Function specific MBX data structure
|
|
*
|
|
* Check for the ready status of FW to send BMBX
|
|
* commands to adapter.
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero
|
|
**/
|
|
static int be_mbox_db_ready_poll(struct be_ctrl_info *ctrl)
|
|
{
|
|
/* wait 30s for generic non-flash MBOX operation */
|
|
#define BEISCSI_MBX_RDY_BIT_TIMEOUT 30000
|
|
void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
unsigned long timeout;
|
|
u32 ready;
|
|
|
|
/*
|
|
* This BMBX busy wait path is used during init only.
|
|
* For the commands executed during init, 5s should suffice.
|
|
*/
|
|
timeout = jiffies + msecs_to_jiffies(BEISCSI_MBX_RDY_BIT_TIMEOUT);
|
|
do {
|
|
if (beiscsi_error(phba))
|
|
return -EIO;
|
|
|
|
ready = ioread32(db);
|
|
if (ready == 0xffffffff)
|
|
return -EIO;
|
|
|
|
ready &= MPU_MAILBOX_DB_RDY_MASK;
|
|
if (ready)
|
|
return 0;
|
|
|
|
if (time_after(jiffies, timeout))
|
|
break;
|
|
msleep(20);
|
|
} while (!ready);
|
|
|
|
beiscsi_log(phba, KERN_ERR,
|
|
BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX,
|
|
"BC_%d : FW Timed Out\n");
|
|
|
|
phba->fw_timeout = true;
|
|
beiscsi_ue_detect(phba);
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* be_mbox_notify: Notify adapter of new BMBX command
|
|
* @ctrl: Function specific MBX data structure
|
|
*
|
|
* Ring doorbell to inform adapter of a BMBX command
|
|
* to process
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero
|
|
**/
|
|
int be_mbox_notify(struct be_ctrl_info *ctrl)
|
|
{
|
|
int status;
|
|
u32 val = 0;
|
|
void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
|
|
struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
|
|
struct be_mcc_mailbox *mbox = mbox_mem->va;
|
|
|
|
status = be_mbox_db_ready_poll(ctrl);
|
|
if (status)
|
|
return status;
|
|
|
|
val &= ~MPU_MAILBOX_DB_RDY_MASK;
|
|
val |= MPU_MAILBOX_DB_HI_MASK;
|
|
val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
|
|
iowrite32(val, db);
|
|
|
|
status = be_mbox_db_ready_poll(ctrl);
|
|
if (status)
|
|
return status;
|
|
|
|
val = 0;
|
|
val &= ~MPU_MAILBOX_DB_RDY_MASK;
|
|
val &= ~MPU_MAILBOX_DB_HI_MASK;
|
|
val |= (u32) (mbox_mem->dma >> 4) << 2;
|
|
iowrite32(val, db);
|
|
|
|
status = be_mbox_db_ready_poll(ctrl);
|
|
if (status)
|
|
return status;
|
|
|
|
/* RDY is set; small delay before CQE read. */
|
|
udelay(1);
|
|
|
|
status = beiscsi_process_mbox_compl(ctrl, &mbox->compl);
|
|
return status;
|
|
}
|
|
|
|
void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
|
|
bool embedded, u8 sge_cnt)
|
|
{
|
|
if (embedded)
|
|
wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
|
|
else
|
|
wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
|
|
MCC_WRB_SGE_CNT_SHIFT;
|
|
wrb->payload_length = payload_len;
|
|
be_dws_cpu_to_le(wrb, 8);
|
|
}
|
|
|
|
void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
|
|
u8 subsystem, u8 opcode, int cmd_len)
|
|
{
|
|
req_hdr->opcode = opcode;
|
|
req_hdr->subsystem = subsystem;
|
|
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
|
|
req_hdr->timeout = BEISCSI_FW_MBX_TIMEOUT;
|
|
}
|
|
|
|
static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
|
|
struct be_dma_mem *mem)
|
|
{
|
|
int i, buf_pages;
|
|
u64 dma = (u64) mem->dma;
|
|
|
|
buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
|
|
for (i = 0; i < buf_pages; i++) {
|
|
pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
|
|
pages[i].hi = cpu_to_le32(upper_32_bits(dma));
|
|
dma += PAGE_SIZE_4K;
|
|
}
|
|
}
|
|
|
|
static u32 eq_delay_to_mult(u32 usec_delay)
|
|
{
|
|
#define MAX_INTR_RATE 651042
|
|
const u32 round = 10;
|
|
u32 multiplier;
|
|
|
|
if (usec_delay == 0)
|
|
multiplier = 0;
|
|
else {
|
|
u32 interrupt_rate = 1000000 / usec_delay;
|
|
if (interrupt_rate == 0)
|
|
multiplier = 1023;
|
|
else {
|
|
multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
|
|
multiplier /= interrupt_rate;
|
|
multiplier = (multiplier + round / 2) / round;
|
|
multiplier = min(multiplier, (u32) 1023);
|
|
}
|
|
}
|
|
return multiplier;
|
|
}
|
|
|
|
struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
|
|
{
|
|
return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
|
|
}
|
|
|
|
int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
|
|
struct be_queue_info *eq, int eq_delay)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_cmd_req_eq_create *req = embedded_payload(wrb);
|
|
struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
|
|
struct be_dma_mem *q_mem = &eq->dma_mem;
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_EQ_CREATE, sizeof(*req));
|
|
|
|
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
|
|
|
|
AMAP_SET_BITS(struct amap_eq_context, func, req->context,
|
|
PCI_FUNC(ctrl->pdev->devfn));
|
|
AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
|
|
AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
|
|
AMAP_SET_BITS(struct amap_eq_context, count, req->context,
|
|
__ilog2_u32(eq->len / 256));
|
|
AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
|
|
eq_delay_to_mult(eq_delay));
|
|
be_dws_cpu_to_le(req->context, sizeof(req->context));
|
|
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (!status) {
|
|
eq->id = le16_to_cpu(resp->eq_id);
|
|
eq->created = true;
|
|
}
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* be_cmd_fw_initialize()- Initialize FW
|
|
* @ctrl: Pointer to function control structure
|
|
*
|
|
* Send FW initialize pattern for the function.
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero value
|
|
**/
|
|
int be_cmd_fw_initialize(struct be_ctrl_info *ctrl)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
int status;
|
|
u8 *endian_check;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
endian_check = (u8 *) wrb;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0x12;
|
|
*endian_check++ = 0x34;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0x56;
|
|
*endian_check++ = 0x78;
|
|
*endian_check++ = 0xFF;
|
|
be_dws_cpu_to_le(wrb, sizeof(*wrb));
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (status)
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
|
|
"BC_%d : be_cmd_fw_initialize Failed\n");
|
|
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* be_cmd_fw_uninit()- Uinitialize FW
|
|
* @ctrl: Pointer to function control structure
|
|
*
|
|
* Send FW uninitialize pattern for the function
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero value
|
|
**/
|
|
int be_cmd_fw_uninit(struct be_ctrl_info *ctrl)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
int status;
|
|
u8 *endian_check;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
endian_check = (u8 *) wrb;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0xAA;
|
|
*endian_check++ = 0xBB;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0xFF;
|
|
*endian_check++ = 0xCC;
|
|
*endian_check++ = 0xDD;
|
|
*endian_check = 0xFF;
|
|
|
|
be_dws_cpu_to_le(wrb, sizeof(*wrb));
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (status)
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
|
|
"BC_%d : be_cmd_fw_uninit Failed\n");
|
|
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
|
|
struct be_queue_info *cq, struct be_queue_info *eq,
|
|
bool sol_evts, bool no_delay, int coalesce_wm)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_cmd_req_cq_create *req = embedded_payload(wrb);
|
|
struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
struct be_dma_mem *q_mem = &cq->dma_mem;
|
|
void *ctxt = &req->context;
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_CQ_CREATE, sizeof(*req));
|
|
|
|
req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
|
|
if (is_chip_be2_be3r(phba)) {
|
|
AMAP_SET_BITS(struct amap_cq_context, coalescwm,
|
|
ctxt, coalesce_wm);
|
|
AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
|
|
AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
|
|
__ilog2_u32(cq->len / 256));
|
|
AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
|
|
AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
|
|
AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_cq_context, func, ctxt,
|
|
PCI_FUNC(ctrl->pdev->devfn));
|
|
} else {
|
|
req->hdr.version = MBX_CMD_VER2;
|
|
req->page_size = 1;
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm,
|
|
ctxt, coalesce_wm);
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, nodelay,
|
|
ctxt, no_delay);
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt,
|
|
__ilog2_u32(cq->len / 256));
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, valid, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, eventable, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, eqid, ctxt, eq->id);
|
|
AMAP_SET_BITS(struct amap_cq_context_v2, armed, ctxt, 1);
|
|
}
|
|
|
|
be_dws_cpu_to_le(ctxt, sizeof(req->context));
|
|
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (!status) {
|
|
cq->id = le16_to_cpu(resp->cq_id);
|
|
cq->created = true;
|
|
} else
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
|
|
"BC_%d : In be_cmd_cq_create, status=ox%08x\n",
|
|
status);
|
|
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
static u32 be_encoded_q_len(int q_len)
|
|
{
|
|
u32 len_encoded = fls(q_len); /* log2(len) + 1 */
|
|
if (len_encoded == 16)
|
|
len_encoded = 0;
|
|
return len_encoded;
|
|
}
|
|
|
|
int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba,
|
|
struct be_queue_info *mccq,
|
|
struct be_queue_info *cq)
|
|
{
|
|
struct be_mcc_wrb *wrb;
|
|
struct be_cmd_req_mcc_create_ext *req;
|
|
struct be_dma_mem *q_mem = &mccq->dma_mem;
|
|
struct be_ctrl_info *ctrl;
|
|
void *ctxt;
|
|
int status;
|
|
|
|
mutex_lock(&phba->ctrl.mbox_lock);
|
|
ctrl = &phba->ctrl;
|
|
wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
req = embedded_payload(wrb);
|
|
ctxt = &req->context;
|
|
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req));
|
|
|
|
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
|
|
req->async_evt_bitmap = 1 << ASYNC_EVENT_CODE_LINK_STATE;
|
|
req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_ISCSI;
|
|
req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_SLI;
|
|
|
|
AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt,
|
|
PCI_FUNC(phba->pcidev->devfn));
|
|
AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
|
|
be_encoded_q_len(mccq->len));
|
|
AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id);
|
|
|
|
be_dws_cpu_to_le(ctxt, sizeof(req->context));
|
|
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (!status) {
|
|
struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
|
|
mccq->id = le16_to_cpu(resp->id);
|
|
mccq->created = true;
|
|
}
|
|
mutex_unlock(&phba->ctrl.mbox_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
|
|
int queue_type)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
u8 subsys = 0, opcode = 0;
|
|
int status;
|
|
|
|
beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
|
|
"BC_%d : In beiscsi_cmd_q_destroy "
|
|
"queue_type : %d\n", queue_type);
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
switch (queue_type) {
|
|
case QTYPE_EQ:
|
|
subsys = CMD_SUBSYSTEM_COMMON;
|
|
opcode = OPCODE_COMMON_EQ_DESTROY;
|
|
break;
|
|
case QTYPE_CQ:
|
|
subsys = CMD_SUBSYSTEM_COMMON;
|
|
opcode = OPCODE_COMMON_CQ_DESTROY;
|
|
break;
|
|
case QTYPE_MCCQ:
|
|
subsys = CMD_SUBSYSTEM_COMMON;
|
|
opcode = OPCODE_COMMON_MCC_DESTROY;
|
|
break;
|
|
case QTYPE_WRBQ:
|
|
subsys = CMD_SUBSYSTEM_ISCSI;
|
|
opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY;
|
|
break;
|
|
case QTYPE_DPDUQ:
|
|
subsys = CMD_SUBSYSTEM_ISCSI;
|
|
opcode = OPCODE_COMMON_ISCSI_DEFQ_DESTROY;
|
|
break;
|
|
case QTYPE_SGL:
|
|
subsys = CMD_SUBSYSTEM_ISCSI;
|
|
opcode = OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES;
|
|
break;
|
|
default:
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
BUG();
|
|
return -ENXIO;
|
|
}
|
|
be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
|
|
if (queue_type != QTYPE_SGL)
|
|
req->id = cpu_to_le16(q->id);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* be_cmd_create_default_pdu_queue()- Create DEFQ for the adapter
|
|
* @ctrl: ptr to ctrl_info
|
|
* @cq: Completion Queue
|
|
* @dq: Default Queue
|
|
* @lenght: ring size
|
|
* @entry_size: size of each entry in DEFQ
|
|
* @is_header: Header or Data DEFQ
|
|
* @ulp_num: Bind to which ULP
|
|
*
|
|
* Create HDR/Data DEFQ for the passed ULP. Unsol PDU are posted
|
|
* on this queue by the FW
|
|
*
|
|
* return
|
|
* Success: 0
|
|
* Failure: Non-Zero Value
|
|
*
|
|
**/
|
|
int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
|
|
struct be_queue_info *cq,
|
|
struct be_queue_info *dq, int length,
|
|
int entry_size, uint8_t is_header,
|
|
uint8_t ulp_num)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_defq_create_req *req = embedded_payload(wrb);
|
|
struct be_dma_mem *q_mem = &dq->dma_mem;
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
void *ctxt = &req->context;
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
|
|
OPCODE_COMMON_ISCSI_DEFQ_CREATE, sizeof(*req));
|
|
|
|
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
|
|
if (phba->fw_config.dual_ulp_aware) {
|
|
req->ulp_num = ulp_num;
|
|
req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT);
|
|
req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT);
|
|
}
|
|
|
|
if (is_chip_be2_be3r(phba)) {
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
rx_pdid, ctxt, 0);
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
rx_pdid_valid, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
pci_func_id, ctxt, PCI_FUNC(ctrl->pdev->devfn));
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
ring_size, ctxt,
|
|
be_encoded_q_len(length /
|
|
sizeof(struct phys_addr)));
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
default_buffer_size, ctxt, entry_size);
|
|
AMAP_SET_BITS(struct amap_be_default_pdu_context,
|
|
cq_id_recv, ctxt, cq->id);
|
|
} else {
|
|
AMAP_SET_BITS(struct amap_default_pdu_context_ext,
|
|
rx_pdid, ctxt, 0);
|
|
AMAP_SET_BITS(struct amap_default_pdu_context_ext,
|
|
rx_pdid_valid, ctxt, 1);
|
|
AMAP_SET_BITS(struct amap_default_pdu_context_ext,
|
|
ring_size, ctxt,
|
|
be_encoded_q_len(length /
|
|
sizeof(struct phys_addr)));
|
|
AMAP_SET_BITS(struct amap_default_pdu_context_ext,
|
|
default_buffer_size, ctxt, entry_size);
|
|
AMAP_SET_BITS(struct amap_default_pdu_context_ext,
|
|
cq_id_recv, ctxt, cq->id);
|
|
}
|
|
|
|
be_dws_cpu_to_le(ctxt, sizeof(req->context));
|
|
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (!status) {
|
|
struct be_ring *defq_ring;
|
|
struct be_defq_create_resp *resp = embedded_payload(wrb);
|
|
|
|
dq->id = le16_to_cpu(resp->id);
|
|
dq->created = true;
|
|
if (is_header)
|
|
defq_ring = &phba->phwi_ctrlr->default_pdu_hdr[ulp_num];
|
|
else
|
|
defq_ring = &phba->phwi_ctrlr->
|
|
default_pdu_data[ulp_num];
|
|
|
|
defq_ring->id = dq->id;
|
|
|
|
if (!phba->fw_config.dual_ulp_aware) {
|
|
defq_ring->ulp_num = BEISCSI_ULP0;
|
|
defq_ring->doorbell_offset = DB_RXULP0_OFFSET;
|
|
} else {
|
|
defq_ring->ulp_num = resp->ulp_num;
|
|
defq_ring->doorbell_offset = resp->doorbell_offset;
|
|
}
|
|
}
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* be_cmd_wrbq_create()- Create WRBQ
|
|
* @ctrl: ptr to ctrl_info
|
|
* @q_mem: memory details for the queue
|
|
* @wrbq: queue info
|
|
* @pwrb_context: ptr to wrb_context
|
|
* @ulp_num: ULP on which the WRBQ is to be created
|
|
*
|
|
* Create WRBQ on the passed ULP_NUM.
|
|
*
|
|
**/
|
|
int be_cmd_wrbq_create(struct be_ctrl_info *ctrl,
|
|
struct be_dma_mem *q_mem,
|
|
struct be_queue_info *wrbq,
|
|
struct hwi_wrb_context *pwrb_context,
|
|
uint8_t ulp_num)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_wrbq_create_req *req = embedded_payload(wrb);
|
|
struct be_wrbq_create_resp *resp = embedded_payload(wrb);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
|
|
OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req));
|
|
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
|
|
|
|
if (phba->fw_config.dual_ulp_aware) {
|
|
req->ulp_num = ulp_num;
|
|
req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT);
|
|
req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT);
|
|
}
|
|
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (!status) {
|
|
wrbq->id = le16_to_cpu(resp->cid);
|
|
wrbq->created = true;
|
|
|
|
pwrb_context->cid = wrbq->id;
|
|
if (!phba->fw_config.dual_ulp_aware) {
|
|
pwrb_context->doorbell_offset = DB_TXULP0_OFFSET;
|
|
pwrb_context->ulp_num = BEISCSI_ULP0;
|
|
} else {
|
|
pwrb_context->ulp_num = resp->ulp_num;
|
|
pwrb_context->doorbell_offset = resp->doorbell_offset;
|
|
}
|
|
}
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
int be_cmd_iscsi_post_template_hdr(struct be_ctrl_info *ctrl,
|
|
struct be_dma_mem *q_mem)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_post_template_pages_req *req = embedded_payload(wrb);
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS,
|
|
sizeof(*req));
|
|
|
|
req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
|
|
req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI;
|
|
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
int be_cmd_iscsi_remove_template_hdr(struct be_ctrl_info *ctrl)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_remove_template_pages_req *req = embedded_payload(wrb);
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS,
|
|
sizeof(*req));
|
|
|
|
req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI;
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
|
|
struct be_dma_mem *q_mem,
|
|
u32 page_offset, u32 num_pages)
|
|
{
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_post_sgl_pages_req *req = embedded_payload(wrb);
|
|
struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
|
|
int status;
|
|
unsigned int curr_pages;
|
|
u32 internal_page_offset = 0;
|
|
u32 temp_num_pages = num_pages;
|
|
|
|
if (num_pages == 0xff)
|
|
num_pages = 1;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
do {
|
|
memset(wrb, 0, sizeof(*wrb));
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
|
|
OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES,
|
|
sizeof(*req));
|
|
curr_pages = BE_NUMBER_OF_FIELD(struct be_post_sgl_pages_req,
|
|
pages);
|
|
req->num_pages = min(num_pages, curr_pages);
|
|
req->page_offset = page_offset;
|
|
be_cmd_page_addrs_prepare(req->pages, req->num_pages, q_mem);
|
|
q_mem->dma = q_mem->dma + (req->num_pages * PAGE_SIZE);
|
|
internal_page_offset += req->num_pages;
|
|
page_offset += req->num_pages;
|
|
num_pages -= req->num_pages;
|
|
|
|
if (temp_num_pages == 0xff)
|
|
req->num_pages = temp_num_pages;
|
|
|
|
status = be_mbox_notify(ctrl);
|
|
if (status) {
|
|
beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
|
|
"BC_%d : FW CMD to map iscsi frags failed.\n");
|
|
|
|
goto error;
|
|
}
|
|
} while (num_pages > 0);
|
|
error:
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
if (status != 0)
|
|
beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
|
|
return status;
|
|
}
|
|
|
|
int beiscsi_cmd_reset_function(struct beiscsi_hba *phba)
|
|
{
|
|
struct be_ctrl_info *ctrl = &phba->ctrl;
|
|
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
|
|
struct be_post_sgl_pages_req *req = embedded_payload(wrb);
|
|
int status;
|
|
|
|
mutex_lock(&ctrl->mbox_lock);
|
|
|
|
req = embedded_payload(wrb);
|
|
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
|
|
OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
|
|
status = be_mbox_notify(ctrl);
|
|
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* be_cmd_set_vlan()- Configure VLAN paramters on the adapter
|
|
* @phba: device priv structure instance
|
|
* @vlan_tag: TAG to be set
|
|
*
|
|
* Set the VLAN_TAG for the adapter or Disable VLAN on adapter
|
|
*
|
|
* returns
|
|
* TAG for the MBX Cmd
|
|
* **/
|
|
int be_cmd_set_vlan(struct beiscsi_hba *phba,
|
|
uint16_t vlan_tag)
|
|
{
|
|
unsigned int tag;
|
|
struct be_mcc_wrb *wrb;
|
|
struct be_cmd_set_vlan_req *req;
|
|
struct be_ctrl_info *ctrl = &phba->ctrl;
|
|
|
|
if (mutex_lock_interruptible(&ctrl->mbox_lock))
|
|
return 0;
|
|
wrb = alloc_mcc_wrb(phba, &tag);
|
|
if (!wrb) {
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
return 0;
|
|
}
|
|
|
|
req = embedded_payload(wrb);
|
|
be_wrb_hdr_prepare(wrb, sizeof(*wrb), true, 0);
|
|
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
|
|
OPCODE_COMMON_ISCSI_NTWK_SET_VLAN,
|
|
sizeof(*req));
|
|
|
|
req->interface_hndl = phba->interface_handle;
|
|
req->vlan_priority = vlan_tag;
|
|
|
|
be_mcc_notify(phba, tag);
|
|
mutex_unlock(&ctrl->mbox_lock);
|
|
|
|
return tag;
|
|
}
|