37 lines
1006 B
Plaintext
37 lines
1006 B
Plaintext
Broadcom Kona Family CPU Enable Method
|
|
--------------------------------------
|
|
This binding defines the enable method used for starting secondary
|
|
CPUs in the following Broadcom SoCs:
|
|
BCM23550
|
|
|
|
The enable method is specified by defining the following required
|
|
properties in the "cpu" device tree node:
|
|
- enable-method = "brcm,bcm23550";
|
|
- secondary-boot-reg = <...>;
|
|
|
|
The secondary-boot-reg property is a u32 value that specifies the
|
|
physical address of the register used to request the ROM holding pen
|
|
code release a secondary CPU. The value written to the register is
|
|
formed by encoding the target CPU id into the low bits of the
|
|
physical start address it should jump to.
|
|
|
|
Example:
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
enable-method = "brcm,bcm23550";
|
|
secondary-boot-reg = <0x3500417c>;
|
|
};
|
|
};
|