OpenCloudOS-Kernel/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

180 lines
4.8 KiB
C

/*
* arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
*
* Marvell Orion-VoIP FXO Reference Design Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* RD-88F5181L FXO Info
****************************************************************************/
/*
* 8M NOR flash Device bus boot chip select
*/
#define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000
#define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M
/*****************************************************************************
* 8M NOR Flash on Device bus Boot chip select
****************************************************************************/
static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
.width = 1,
};
static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
.flags = IORESOURCE_MEM,
.start = RD88F5181L_FXO_NOR_BOOT_BASE,
.end = RD88F5181L_FXO_NOR_BOOT_BASE +
RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
};
static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &rd88f5181l_fxo_nor_boot_flash_data,
},
.num_resources = 1,
.resource = &rd88f5181l_fxo_nor_boot_flash_resource,
};
/*****************************************************************************
* General Setup
****************************************************************************/
static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
MPP0_GPIO, /* LED1 CardBus LED (front panel) */
MPP1_GPIO, /* PCI_intA */
MPP2_GPIO, /* Hard Reset / Factory Init*/
MPP3_GPIO, /* FXS or DAA select */
MPP4_GPIO, /* LED6 - phone LED (front panel) */
MPP5_GPIO, /* LED5 - phone LED (front panel) */
MPP6_PCI_CLK, /* CPU PCI refclk */
MPP7_PCI_CLK, /* PCI/PCIe refclk */
MPP8_GPIO, /* CardBus reset */
MPP9_GPIO, /* GE_RXERR */
MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */
MPP11_GPIO, /* Lifeline control */
MPP12_GIGE, /* GE_TXD[4] */
MPP13_GIGE, /* GE_TXD[5] */
MPP14_GIGE, /* GE_TXD[6] */
MPP15_GIGE, /* GE_TXD[7] */
MPP16_GIGE, /* GE_RXD[4] */
MPP17_GIGE, /* GE_RXD[5] */
MPP18_GIGE, /* GE_RXD[6] */
MPP19_GIGE, /* GE_RXD[7] */
0,
};
static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[0] = "lan2",
.port_names[1] = "lan1",
.port_names[2] = "wan",
.port_names[3] = "cpu",
.port_names[5] = "lan4",
.port_names[7] = "lan3",
};
static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
.nr_chips = 1,
.chip = &rd88f5181l_fxo_switch_chip_data,
};
static void __init rd88f5181l_fxo_init(void)
{
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,
RD88F5181L_FXO_NOR_BOOT_SIZE);
platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
}
static int __init
rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
/*
* Check for devices with hard-wired IRQs.
*/
irq = orion5x_pci_map_irq(dev, slot, pin);
if (irq != -1)
return irq;
/*
* Mini-PCI / Cardbus slot.
*/
return gpio_to_irq(1);
}
static struct hw_pci rd88f5181l_fxo_pci __initdata = {
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
.map_irq = rd88f5181l_fxo_pci_map_irq,
};
static int __init rd88f5181l_fxo_pci_init(void)
{
if (machine_is_rd88f5181l_fxo()) {
orion5x_pci_set_cardbus_mode();
pci_common_init(&rd88f5181l_fxo_pci);
}
return 0;
}
subsys_initcall(rd88f5181l_fxo_pci_init);
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
.atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
.fixup = tag_fixup_mem32,
.restart = orion5x_restart,
MACHINE_END