OpenCloudOS-Kernel/drivers/usb
Mats Karrman a86c309e71 usb: typec: Don't prevent using constant typec_mode_desc initializers
In some situations, e.g. when registering alternate modes for local typec
ports, it may be handy to use constant mode descriptors. Allow this by
changing the mode descriptor arguments of typec_port_register_altmode()
et.al. to using const pointers.

Signed-off-by: Mats Karrman <mats.dev.list@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 12:20:53 +02:00
..
atm usb: atm: remove unnecessary code 2017-03-16 17:58:44 +09:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea Two changes for this v4.12-rc1: 2017-04-18 16:52:20 +02:00
class usb: cdc-wdm: use memdup_user 2017-05-17 12:20:53 +02:00
common DeviceTree for 4.12: 2017-05-05 19:33:07 -07:00
core usb: core: Check URB setup_packet and transfer_buffer sanity 2017-05-17 12:20:53 +02:00
dwc2 usb: changes for v4.12 2017-04-11 16:47:26 +02:00
dwc3 USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
early usb/early: Add driver for xhci debug capability 2017-03-21 12:30:05 +01:00
gadget usb: udc: core: Error if req->buf is either from vmalloc or stack 2017-05-17 12:20:53 +02:00
host usb: host: xhci: remove #ifdef around PM functions 2017-04-26 22:55:19 +02:00
image sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
isp1760 usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW 2017-03-17 13:16:56 +09:00
misc usb: misc: legousbtower: Fix buffers on stack 2017-04-26 11:28:45 +02:00
mon sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
mtu3 usb: mtu3: Replace the extcon API 2017-04-11 10:58:21 +03:00
musb usb: musb: don't mark of_dev_auxdata as initdata 2017-04-26 11:30:02 +02:00
phy usb: changes for v4.12 2017-04-11 16:47:26 +02:00
renesas_usbhs usb: renesas_usbhs: Replace the deprecated extcon API 2017-01-24 11:04:14 +02:00
serial USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
storage USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h 2017-04-25 20:01:23 +02:00
typec usb: typec: Don't prevent using constant typec_mode_desc initializers 2017-05-17 12:20:53 +02:00
usbip usb: usbip: Remove unnecessary get_vdev() 2017-04-08 12:04:42 +02:00
wusbcore USB: wusbcore: fix NULL-deref at probe 2017-03-14 17:07:30 +08:00
Kconfig usb: USB Type-C connector class 2017-03-23 13:48:44 +01:00
Makefile USB patches for 4.12-rc1 2017-05-04 18:03:51 -07:00
README
usb-skeleton.c USB: usb-skeleton: refactor endpoint retrieval 2017-03-23 13:54:08 +01:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.