966 lines
24 KiB
C
966 lines
24 KiB
C
/*
|
|
* Support for IDE interfaces on Celleb platform
|
|
*
|
|
* (C) Copyright 2006 TOSHIBA CORPORATION
|
|
*
|
|
* This code is based on drivers/ide/pci/siimage.c:
|
|
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/init.h>
|
|
|
|
#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
|
|
|
|
#define SCC_PATA_NAME "scc IDE"
|
|
|
|
#define TDVHSEL_MASTER 0x00000001
|
|
#define TDVHSEL_SLAVE 0x00000004
|
|
|
|
#define MODE_JCUSFEN 0x00000080
|
|
|
|
#define CCKCTRL_ATARESET 0x00040000
|
|
#define CCKCTRL_BUFCNT 0x00020000
|
|
#define CCKCTRL_CRST 0x00010000
|
|
#define CCKCTRL_OCLKEN 0x00000100
|
|
#define CCKCTRL_ATACLKOEN 0x00000002
|
|
#define CCKCTRL_LCLKEN 0x00000001
|
|
|
|
#define QCHCD_IOS_SS 0x00000001
|
|
|
|
#define QCHSD_STPDIAG 0x00020000
|
|
|
|
#define INTMASK_MSK 0xD1000012
|
|
#define INTSTS_SERROR 0x80000000
|
|
#define INTSTS_PRERR 0x40000000
|
|
#define INTSTS_RERR 0x10000000
|
|
#define INTSTS_ICERR 0x01000000
|
|
#define INTSTS_BMSINT 0x00000010
|
|
#define INTSTS_BMHE 0x00000008
|
|
#define INTSTS_IOIRQS 0x00000004
|
|
#define INTSTS_INTRQ 0x00000002
|
|
#define INTSTS_ACTEINT 0x00000001
|
|
|
|
#define ECMODE_VALUE 0x01
|
|
|
|
static struct scc_ports {
|
|
unsigned long ctl, dma;
|
|
struct ide_host *host; /* for removing port from system */
|
|
} scc_ports[MAX_HWIFS];
|
|
|
|
/* PIO transfer mode table */
|
|
/* JCHST */
|
|
static unsigned long JCHSTtbl[2][7] = {
|
|
{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHHT */
|
|
static unsigned long JCHHTtbl[2][7] = {
|
|
{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
|
|
{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCHCT */
|
|
static unsigned long JCHCTtbl[2][7] = {
|
|
{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
|
|
{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
|
|
};
|
|
|
|
|
|
/* DMA transfer mode table */
|
|
/* JCHDCTM/JCHDCTS */
|
|
static unsigned long JCHDCTxtbl[2][7] = {
|
|
{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
|
|
{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
|
|
};
|
|
|
|
/* JCSTWTM/JCSTWTS */
|
|
static unsigned long JCSTWTxtbl[2][7] = {
|
|
{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
|
|
{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCTSS */
|
|
static unsigned long JCTSStbl[2][7] = {
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
|
|
{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
|
|
};
|
|
|
|
/* JCENVT */
|
|
static unsigned long JCENVTtbl[2][7] = {
|
|
{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
|
|
};
|
|
|
|
/* JCACTSELS/JCACTSELM */
|
|
static unsigned long JCACTSELtbl[2][7] = {
|
|
{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
|
|
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
|
|
};
|
|
|
|
|
|
static u8 scc_ide_inb(unsigned long port)
|
|
{
|
|
u32 data = in_be32((void*)port);
|
|
return (u8)data;
|
|
}
|
|
|
|
static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
|
|
{
|
|
out_be32((void *)hwif->io_ports.command_addr, cmd);
|
|
eieio();
|
|
in_be32((void *)(hwif->dma_base + 0x01c));
|
|
eieio();
|
|
}
|
|
|
|
static u8 scc_read_status(ide_hwif_t *hwif)
|
|
{
|
|
return (u8)in_be32((void *)hwif->io_ports.status_addr);
|
|
}
|
|
|
|
static u8 scc_read_altstatus(ide_hwif_t *hwif)
|
|
{
|
|
return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
|
|
}
|
|
|
|
static u8 scc_dma_sff_read_status(ide_hwif_t *hwif)
|
|
{
|
|
return (u8)in_be32((void *)(hwif->dma_base + 4));
|
|
}
|
|
|
|
static void scc_set_irq(ide_hwif_t *hwif, int on)
|
|
{
|
|
u8 ctl = ATA_DEVCTL_OBS;
|
|
|
|
if (on == 4) { /* hack for SRST */
|
|
ctl |= 4;
|
|
on &= ~4;
|
|
}
|
|
|
|
ctl |= on ? 0 : 2;
|
|
|
|
out_be32((void *)hwif->io_ports.ctl_addr, ctl);
|
|
eieio();
|
|
in_be32((void *)(hwif->dma_base + 0x01c));
|
|
eieio();
|
|
}
|
|
|
|
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
|
|
{
|
|
u16 *ptr = (u16 *)addr;
|
|
while (count--) {
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
}
|
|
}
|
|
|
|
static void scc_ide_insl(unsigned long port, void *addr, u32 count)
|
|
{
|
|
u16 *ptr = (u16 *)addr;
|
|
while (count--) {
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
*ptr++ = le16_to_cpu(in_be32((void*)port));
|
|
}
|
|
}
|
|
|
|
static void scc_ide_outb(u8 addr, unsigned long port)
|
|
{
|
|
out_be32((void*)port, addr);
|
|
}
|
|
|
|
static void
|
|
scc_ide_outsw(unsigned long port, void *addr, u32 count)
|
|
{
|
|
u16 *ptr = (u16 *)addr;
|
|
while (count--) {
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
}
|
|
}
|
|
|
|
static void
|
|
scc_ide_outsl(unsigned long port, void *addr, u32 count)
|
|
{
|
|
u16 *ptr = (u16 *)addr;
|
|
while (count--) {
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
out_be32((void*)port, cpu_to_le16(*ptr++));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* scc_set_pio_mode - set host controller for PIO mode
|
|
* @drive: drive
|
|
* @pio: PIO mode number
|
|
*
|
|
* Load the timing settings for this device mode into the
|
|
* controller.
|
|
*/
|
|
|
|
static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct scc_ports *ports = ide_get_hwifdata(hwif);
|
|
unsigned long ctl_base = ports->ctl;
|
|
unsigned long cckctrl_port = ctl_base + 0xff0;
|
|
unsigned long piosht_port = ctl_base + 0x000;
|
|
unsigned long pioct_port = ctl_base + 0x004;
|
|
unsigned long reg;
|
|
int offset;
|
|
|
|
reg = in_be32((void __iomem *)cckctrl_port);
|
|
if (reg & CCKCTRL_ATACLKOEN) {
|
|
offset = 1; /* 133MHz */
|
|
} else {
|
|
offset = 0; /* 100MHz */
|
|
}
|
|
reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
|
|
out_be32((void __iomem *)piosht_port, reg);
|
|
reg = JCHCTtbl[offset][pio];
|
|
out_be32((void __iomem *)pioct_port, reg);
|
|
}
|
|
|
|
/**
|
|
* scc_set_dma_mode - set host controller for DMA mode
|
|
* @drive: drive
|
|
* @speed: DMA mode
|
|
*
|
|
* Load the timing settings for this device mode into the
|
|
* controller.
|
|
*/
|
|
|
|
static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct scc_ports *ports = ide_get_hwifdata(hwif);
|
|
unsigned long ctl_base = ports->ctl;
|
|
unsigned long cckctrl_port = ctl_base + 0xff0;
|
|
unsigned long mdmact_port = ctl_base + 0x008;
|
|
unsigned long mcrcst_port = ctl_base + 0x00c;
|
|
unsigned long sdmact_port = ctl_base + 0x010;
|
|
unsigned long scrcst_port = ctl_base + 0x014;
|
|
unsigned long udenvt_port = ctl_base + 0x018;
|
|
unsigned long tdvhsel_port = ctl_base + 0x020;
|
|
int is_slave = drive->dn & 1;
|
|
int offset, idx;
|
|
unsigned long reg;
|
|
unsigned long jcactsel;
|
|
|
|
reg = in_be32((void __iomem *)cckctrl_port);
|
|
if (reg & CCKCTRL_ATACLKOEN) {
|
|
offset = 1; /* 133MHz */
|
|
} else {
|
|
offset = 0; /* 100MHz */
|
|
}
|
|
|
|
idx = speed - XFER_UDMA_0;
|
|
|
|
jcactsel = JCACTSELtbl[offset][idx];
|
|
if (is_slave) {
|
|
out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
|
|
jcactsel = jcactsel << 2;
|
|
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
|
|
} else {
|
|
out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
|
|
out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
|
|
out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
|
|
}
|
|
reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
|
|
out_be32((void __iomem *)udenvt_port, reg);
|
|
}
|
|
|
|
static void scc_dma_host_set(ide_drive_t *drive, int on)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 unit = drive->dn & 1;
|
|
u8 dma_stat = scc_dma_sff_read_status(hwif);
|
|
|
|
if (on)
|
|
dma_stat |= (1 << (5 + unit));
|
|
else
|
|
dma_stat &= ~(1 << (5 + unit));
|
|
|
|
scc_ide_outb(dma_stat, hwif->dma_base + 4);
|
|
}
|
|
|
|
/**
|
|
* scc_ide_dma_setup - begin a DMA phase
|
|
* @drive: target device
|
|
*
|
|
* Build an IDE DMA PRD (IDE speak for scatter gather table)
|
|
* and then set up the DMA transfer registers.
|
|
*
|
|
* Returns 0 on success. If a PIO fallback is required then 1
|
|
* is returned.
|
|
*/
|
|
|
|
static int scc_dma_setup(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
struct request *rq = hwif->rq;
|
|
unsigned int reading;
|
|
u8 dma_stat;
|
|
|
|
if (rq_data_dir(rq))
|
|
reading = 0;
|
|
else
|
|
reading = 1 << 3;
|
|
|
|
/* fall back to pio! */
|
|
if (!ide_build_dmatable(drive, rq)) {
|
|
ide_map_sg(drive, rq);
|
|
return 1;
|
|
}
|
|
|
|
/* PRD table */
|
|
out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
|
|
|
|
/* specify r/w */
|
|
out_be32((void __iomem *)hwif->dma_base, reading);
|
|
|
|
/* read DMA status for INTR & ERROR flags */
|
|
dma_stat = scc_dma_sff_read_status(hwif);
|
|
|
|
/* clear INTR & ERROR flags */
|
|
out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
|
|
drive->waiting_for_dma = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void scc_dma_start(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 dma_cmd = scc_ide_inb(hwif->dma_base);
|
|
|
|
/* start DMA */
|
|
scc_ide_outb(dma_cmd | 1, hwif->dma_base);
|
|
wmb();
|
|
}
|
|
|
|
static int __scc_dma_end(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 dma_stat, dma_cmd;
|
|
|
|
drive->waiting_for_dma = 0;
|
|
/* get DMA command mode */
|
|
dma_cmd = scc_ide_inb(hwif->dma_base);
|
|
/* stop DMA */
|
|
scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
|
|
/* get DMA status */
|
|
dma_stat = scc_dma_sff_read_status(hwif);
|
|
/* clear the INTR & ERROR bits */
|
|
scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
|
|
/* purge DMA mappings */
|
|
ide_destroy_dmatable(drive);
|
|
/* verify good DMA status */
|
|
wmb();
|
|
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
|
|
}
|
|
|
|
/**
|
|
* scc_dma_end - Stop DMA
|
|
* @drive: IDE drive
|
|
*
|
|
* Check and clear INT Status register.
|
|
* Then call __scc_dma_end().
|
|
*/
|
|
|
|
static int scc_dma_end(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
void __iomem *dma_base = (void __iomem *)hwif->dma_base;
|
|
unsigned long intsts_port = hwif->dma_base + 0x014;
|
|
u32 reg;
|
|
int dma_stat, data_loss = 0;
|
|
static int retry = 0;
|
|
|
|
/* errata A308 workaround: Step5 (check data loss) */
|
|
/* We don't check non ide_disk because it is limited to UDMA4 */
|
|
if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
|
|
& ATA_ERR) &&
|
|
drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
|
|
reg = in_be32((void __iomem *)intsts_port);
|
|
if (!(reg & INTSTS_ACTEINT)) {
|
|
printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
|
|
drive->name);
|
|
data_loss = 1;
|
|
if (retry++) {
|
|
struct request *rq = hwif->rq;
|
|
ide_drive_t *drive;
|
|
int i;
|
|
|
|
/* ERROR_RESET and drive->crc_count are needed
|
|
* to reduce DMA transfer mode in retry process.
|
|
*/
|
|
if (rq)
|
|
rq->errors |= ERROR_RESET;
|
|
|
|
ide_port_for_each_dev(i, drive, hwif)
|
|
drive->crc_count++;
|
|
}
|
|
}
|
|
}
|
|
|
|
while (1) {
|
|
reg = in_be32((void __iomem *)intsts_port);
|
|
|
|
if (reg & INTSTS_SERROR) {
|
|
printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
|
|
out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
|
|
|
|
out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_PRERR) {
|
|
u32 maea0, maec0;
|
|
unsigned long ctl_base = hwif->config_data;
|
|
|
|
maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
|
|
maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
|
|
|
|
printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
|
|
|
|
out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
|
|
|
|
out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_RERR) {
|
|
printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
|
|
out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
|
|
|
|
out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ICERR) {
|
|
out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
|
|
|
|
printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
|
|
out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMSINT) {
|
|
printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
|
|
out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
|
|
|
|
ide_do_reset(drive);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_BMHE) {
|
|
out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_ACTEINT) {
|
|
out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
|
|
continue;
|
|
}
|
|
|
|
if (reg & INTSTS_IOIRQS) {
|
|
out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
|
|
dma_stat = __scc_dma_end(drive);
|
|
if (data_loss)
|
|
dma_stat |= 2; /* emulate DMA error (to retry command) */
|
|
return dma_stat;
|
|
}
|
|
|
|
/* returns 1 if dma irq issued, 0 otherwise */
|
|
static int scc_dma_test_irq(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
|
|
|
|
/* SCC errata A252,A308 workaround: Step4 */
|
|
if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
|
|
& ATA_ERR) &&
|
|
(int_stat & INTSTS_INTRQ))
|
|
return 1;
|
|
|
|
/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
|
|
if (int_stat & INTSTS_IOIRQS)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 scc_udma_filter(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
u8 mask = hwif->ultra_mask;
|
|
|
|
/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
|
|
if ((drive->media != ide_disk) && (mask & 0xE0)) {
|
|
printk(KERN_INFO "%s: limit %s to UDMA4\n",
|
|
SCC_PATA_NAME, drive->name);
|
|
mask = ATA_UDMA4;
|
|
}
|
|
|
|
return mask;
|
|
}
|
|
|
|
/**
|
|
* setup_mmio_scc - map CTRL/BMID region
|
|
* @dev: PCI device we are configuring
|
|
* @name: device name
|
|
*
|
|
*/
|
|
|
|
static int setup_mmio_scc (struct pci_dev *dev, const char *name)
|
|
{
|
|
void __iomem *ctl_addr;
|
|
void __iomem *dma_addr;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < MAX_HWIFS; i++) {
|
|
if (scc_ports[i].ctl == 0)
|
|
break;
|
|
}
|
|
if (i >= MAX_HWIFS)
|
|
return -ENOMEM;
|
|
|
|
ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: can't reserve resources\n", name);
|
|
return ret;
|
|
}
|
|
|
|
ctl_addr = pci_ioremap_bar(dev, 0);
|
|
if (!ctl_addr)
|
|
goto fail_0;
|
|
|
|
dma_addr = pci_ioremap_bar(dev, 1);
|
|
if (!dma_addr)
|
|
goto fail_1;
|
|
|
|
pci_set_master(dev);
|
|
scc_ports[i].ctl = (unsigned long)ctl_addr;
|
|
scc_ports[i].dma = (unsigned long)dma_addr;
|
|
pci_set_drvdata(dev, (void *) &scc_ports[i]);
|
|
|
|
return 1;
|
|
|
|
fail_1:
|
|
iounmap(ctl_addr);
|
|
fail_0:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int scc_ide_setup_pci_device(struct pci_dev *dev,
|
|
const struct ide_port_info *d)
|
|
{
|
|
struct scc_ports *ports = pci_get_drvdata(dev);
|
|
struct ide_host *host;
|
|
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
|
|
int i, rc;
|
|
|
|
memset(&hw, 0, sizeof(hw));
|
|
for (i = 0; i <= 8; i++)
|
|
hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
|
|
hw.irq = dev->irq;
|
|
hw.dev = &dev->dev;
|
|
hw.chipset = ide_pci;
|
|
|
|
rc = ide_host_add(d, hws, &host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ports->host = host;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* init_setup_scc - set up an SCC PATA Controller
|
|
* @dev: PCI device
|
|
* @d: IDE port info
|
|
*
|
|
* Perform the initial set up for this device.
|
|
*/
|
|
|
|
static int __devinit init_setup_scc(struct pci_dev *dev,
|
|
const struct ide_port_info *d)
|
|
{
|
|
unsigned long ctl_base;
|
|
unsigned long dma_base;
|
|
unsigned long cckctrl_port;
|
|
unsigned long intmask_port;
|
|
unsigned long mode_port;
|
|
unsigned long ecmode_port;
|
|
u32 reg = 0;
|
|
struct scc_ports *ports;
|
|
int rc;
|
|
|
|
rc = pci_enable_device(dev);
|
|
if (rc)
|
|
goto end;
|
|
|
|
rc = setup_mmio_scc(dev, d->name);
|
|
if (rc < 0)
|
|
goto end;
|
|
|
|
ports = pci_get_drvdata(dev);
|
|
ctl_base = ports->ctl;
|
|
dma_base = ports->dma;
|
|
cckctrl_port = ctl_base + 0xff0;
|
|
intmask_port = dma_base + 0x010;
|
|
mode_port = ctl_base + 0x024;
|
|
ecmode_port = ctl_base + 0xf00;
|
|
|
|
/* controller initialization */
|
|
reg = 0;
|
|
out_be32((void*)cckctrl_port, reg);
|
|
reg |= CCKCTRL_ATACLKOEN;
|
|
out_be32((void*)cckctrl_port, reg);
|
|
reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
|
|
out_be32((void*)cckctrl_port, reg);
|
|
reg |= CCKCTRL_CRST;
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
for (;;) {
|
|
reg = in_be32((void*)cckctrl_port);
|
|
if (reg & CCKCTRL_CRST)
|
|
break;
|
|
udelay(5000);
|
|
}
|
|
|
|
reg |= CCKCTRL_ATARESET;
|
|
out_be32((void*)cckctrl_port, reg);
|
|
|
|
out_be32((void*)ecmode_port, ECMODE_VALUE);
|
|
out_be32((void*)mode_port, MODE_JCUSFEN);
|
|
out_be32((void*)intmask_port, INTMASK_MSK);
|
|
|
|
rc = scc_ide_setup_pci_device(dev, d);
|
|
|
|
end:
|
|
return rc;
|
|
}
|
|
|
|
static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
|
|
{
|
|
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
|
|
struct ide_taskfile *tf = &task->tf;
|
|
u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
|
|
|
|
if (task->tf_flags & IDE_TFLAG_FLAGGED)
|
|
HIHI = 0xFF;
|
|
|
|
if (task->tf_flags & IDE_TFLAG_OUT_DATA)
|
|
out_be32((void *)io_ports->data_addr,
|
|
(tf->hob_data << 8) | tf->data);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
|
|
scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
|
|
scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
|
|
scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
|
|
scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
|
|
scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
|
|
scc_ide_outb(tf->feature, io_ports->feature_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
|
|
scc_ide_outb(tf->nsect, io_ports->nsect_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
|
|
scc_ide_outb(tf->lbal, io_ports->lbal_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
|
|
scc_ide_outb(tf->lbam, io_ports->lbam_addr);
|
|
if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
|
|
scc_ide_outb(tf->lbah, io_ports->lbah_addr);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
|
|
scc_ide_outb((tf->device & HIHI) | drive->select,
|
|
io_ports->device_addr);
|
|
}
|
|
|
|
static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
|
|
{
|
|
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
|
|
struct ide_taskfile *tf = &task->tf;
|
|
|
|
if (task->tf_flags & IDE_TFLAG_IN_DATA) {
|
|
u16 data = (u16)in_be32((void *)io_ports->data_addr);
|
|
|
|
tf->data = data & 0xff;
|
|
tf->hob_data = (data >> 8) & 0xff;
|
|
}
|
|
|
|
/* be sure we're looking at the low order bits */
|
|
scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
|
|
tf->feature = scc_ide_inb(io_ports->feature_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
|
|
tf->nsect = scc_ide_inb(io_ports->nsect_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_LBAL)
|
|
tf->lbal = scc_ide_inb(io_ports->lbal_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_LBAM)
|
|
tf->lbam = scc_ide_inb(io_ports->lbam_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_LBAH)
|
|
tf->lbah = scc_ide_inb(io_ports->lbah_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
|
|
tf->device = scc_ide_inb(io_ports->device_addr);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_LBA48) {
|
|
scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
|
|
|
|
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
|
|
tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
|
|
tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
|
|
tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
|
|
tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr);
|
|
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
|
|
tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr);
|
|
}
|
|
}
|
|
|
|
static void scc_input_data(ide_drive_t *drive, struct request *rq,
|
|
void *buf, unsigned int len)
|
|
{
|
|
unsigned long data_addr = drive->hwif->io_ports.data_addr;
|
|
|
|
len++;
|
|
|
|
if (drive->io_32bit) {
|
|
scc_ide_insl(data_addr, buf, len / 4);
|
|
|
|
if ((len & 3) >= 2)
|
|
scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
|
|
} else
|
|
scc_ide_insw(data_addr, buf, len / 2);
|
|
}
|
|
|
|
static void scc_output_data(ide_drive_t *drive, struct request *rq,
|
|
void *buf, unsigned int len)
|
|
{
|
|
unsigned long data_addr = drive->hwif->io_ports.data_addr;
|
|
|
|
len++;
|
|
|
|
if (drive->io_32bit) {
|
|
scc_ide_outsl(data_addr, buf, len / 4);
|
|
|
|
if ((len & 3) >= 2)
|
|
scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
|
|
} else
|
|
scc_ide_outsw(data_addr, buf, len / 2);
|
|
}
|
|
|
|
/**
|
|
* init_mmio_iops_scc - set up the iops for MMIO
|
|
* @hwif: interface to set up
|
|
*
|
|
*/
|
|
|
|
static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
struct scc_ports *ports = pci_get_drvdata(dev);
|
|
unsigned long dma_base = ports->dma;
|
|
|
|
ide_set_hwifdata(hwif, ports);
|
|
|
|
hwif->dma_base = dma_base;
|
|
hwif->config_data = ports->ctl;
|
|
}
|
|
|
|
/**
|
|
* init_iops_scc - set up iops
|
|
* @hwif: interface to set up
|
|
*
|
|
* Do the basic setup for the SCC hardware interface
|
|
* and then do the MMIO setup.
|
|
*/
|
|
|
|
static void __devinit init_iops_scc(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
|
|
|
hwif->hwif_data = NULL;
|
|
if (pci_get_drvdata(dev) == NULL)
|
|
return;
|
|
init_mmio_iops_scc(hwif);
|
|
}
|
|
|
|
static int __devinit scc_init_dma(ide_hwif_t *hwif,
|
|
const struct ide_port_info *d)
|
|
{
|
|
return ide_allocate_dma_engine(hwif);
|
|
}
|
|
|
|
static u8 scc_cable_detect(ide_hwif_t *hwif)
|
|
{
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
/**
|
|
* init_hwif_scc - set up hwif
|
|
* @hwif: interface to set up
|
|
*
|
|
* We do the basic set up of the interface structure. The SCC
|
|
* requires several custom handlers so we override the default
|
|
* ide DMA handlers appropriately.
|
|
*/
|
|
|
|
static void __devinit init_hwif_scc(ide_hwif_t *hwif)
|
|
{
|
|
/* PTERADD */
|
|
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
|
|
|
|
if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
|
|
hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
|
|
else
|
|
hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
|
|
}
|
|
|
|
static const struct ide_tp_ops scc_tp_ops = {
|
|
.exec_command = scc_exec_command,
|
|
.read_status = scc_read_status,
|
|
.read_altstatus = scc_read_altstatus,
|
|
|
|
.set_irq = scc_set_irq,
|
|
|
|
.tf_load = scc_tf_load,
|
|
.tf_read = scc_tf_read,
|
|
|
|
.input_data = scc_input_data,
|
|
.output_data = scc_output_data,
|
|
};
|
|
|
|
static const struct ide_port_ops scc_port_ops = {
|
|
.set_pio_mode = scc_set_pio_mode,
|
|
.set_dma_mode = scc_set_dma_mode,
|
|
.udma_filter = scc_udma_filter,
|
|
.cable_detect = scc_cable_detect,
|
|
};
|
|
|
|
static const struct ide_dma_ops scc_dma_ops = {
|
|
.dma_host_set = scc_dma_host_set,
|
|
.dma_setup = scc_dma_setup,
|
|
.dma_exec_cmd = ide_dma_exec_cmd,
|
|
.dma_start = scc_dma_start,
|
|
.dma_end = scc_dma_end,
|
|
.dma_test_irq = scc_dma_test_irq,
|
|
.dma_lost_irq = ide_dma_lost_irq,
|
|
.dma_timeout = ide_dma_timeout,
|
|
.dma_sff_read_status = scc_dma_sff_read_status,
|
|
};
|
|
|
|
#define DECLARE_SCC_DEV(name_str) \
|
|
{ \
|
|
.name = name_str, \
|
|
.init_iops = init_iops_scc, \
|
|
.init_dma = scc_init_dma, \
|
|
.init_hwif = init_hwif_scc, \
|
|
.tp_ops = &scc_tp_ops, \
|
|
.port_ops = &scc_port_ops, \
|
|
.dma_ops = &scc_dma_ops, \
|
|
.host_flags = IDE_HFLAG_SINGLE, \
|
|
.pio_mask = ATA_PIO4, \
|
|
}
|
|
|
|
static const struct ide_port_info scc_chipsets[] __devinitdata = {
|
|
/* 0 */ DECLARE_SCC_DEV("sccIDE"),
|
|
};
|
|
|
|
/**
|
|
* scc_init_one - pci layer discovery entry
|
|
* @dev: PCI device
|
|
* @id: ident table entry
|
|
*
|
|
* Called by the PCI code when it finds an SCC PATA controller.
|
|
* We then use the IDE PCI generic helper to do most of the work.
|
|
*/
|
|
|
|
static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
|
|
}
|
|
|
|
/**
|
|
* scc_remove - pci layer remove entry
|
|
* @dev: PCI device
|
|
*
|
|
* Called by the PCI code when it removes an SCC PATA controller.
|
|
*/
|
|
|
|
static void __devexit scc_remove(struct pci_dev *dev)
|
|
{
|
|
struct scc_ports *ports = pci_get_drvdata(dev);
|
|
struct ide_host *host = ports->host;
|
|
|
|
ide_host_remove(host);
|
|
|
|
iounmap((void*)ports->dma);
|
|
iounmap((void*)ports->ctl);
|
|
pci_release_selected_regions(dev, (1 << 2) - 1);
|
|
memset(ports, 0, sizeof(*ports));
|
|
}
|
|
|
|
static const struct pci_device_id scc_pci_tbl[] = {
|
|
{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
|
|
|
|
static struct pci_driver scc_pci_driver = {
|
|
.name = "SCC IDE",
|
|
.id_table = scc_pci_tbl,
|
|
.probe = scc_init_one,
|
|
.remove = __devexit_p(scc_remove),
|
|
};
|
|
|
|
static int scc_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&scc_pci_driver);
|
|
}
|
|
|
|
module_init(scc_ide_init);
|
|
/* -- No exit code?
|
|
static void scc_ide_exit(void)
|
|
{
|
|
ide_pci_unregister_driver(&scc_pci_driver);
|
|
}
|
|
module_exit(scc_ide_exit);
|
|
*/
|
|
|
|
|
|
MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
|
|
MODULE_LICENSE("GPL");
|