UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/wl12xx/boot.c

296 lines
8.0 KiB
C
Raw Blame History

/*
* This file is part of wl12xx
*
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/gpio.h>
#include "reg.h"
#include "boot.h"
#include "spi.h"
#include "event.h"
static void wl12xx_boot_enable_interrupts(struct wl12xx *wl)
{
enable_irq(wl->irq);
}
void wl12xx_boot_target_enable_interrupts(struct wl12xx *wl)
{
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
wl12xx_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
}
int wl12xx_boot_soft_reset(struct wl12xx *wl)
{
unsigned long timeout;
u32 boot_data;
/* perform soft reset */
wl12xx_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
/* SOFT_RESET is self clearing */
timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
while (1) {
boot_data = wl12xx_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
wl12xx_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
break;
if (time_after(jiffies, timeout)) {
/* 1.2 check pWhalBus->uSelfClearTime if the
* timeout was reached */
wl12xx_error("soft reset timeout");
return -1;
}
udelay(SOFT_RESET_STALL_TIME);
}
/* disable Rx/Tx */
wl12xx_reg_write32(wl, ENABLE, 0x0);
/* disable auto calibration on start*/
wl12xx_reg_write32(wl, SPARE_A2, 0xffff);
return 0;
}
int wl12xx_boot_init_seq(struct wl12xx *wl)
{
u32 scr_pad6, init_data, tmp, elp_cmd, ref_freq;
/*
* col #1: INTEGER_DIVIDER
* col #2: FRACTIONAL_DIVIDER
* col #3: ATTN_BB
* col #4: ALPHA_BB
* col #5: STOP_TIME_BB
* col #6: BB_PLL_LOOP_FILTER
*/
static const u32 LUT[REF_FREQ_NUM][LUT_PARAM_NUM] = {
{ 83, 87381, 0xB, 5, 0xF00, 3}, /* REF_FREQ_19_2*/
{ 61, 141154, 0xB, 5, 0x1450, 2}, /* REF_FREQ_26_0*/
{ 41, 174763, 0xC, 6, 0x2D00, 1}, /* REF_FREQ_38_4*/
{ 40, 0, 0xC, 6, 0x2EE0, 1}, /* REF_FREQ_40_0*/
{ 47, 162280, 0xC, 6, 0x2760, 1} /* REF_FREQ_33_6 */
};
/* read NVS params */
scr_pad6 = wl12xx_reg_read32(wl, SCR_PAD6);
wl12xx_debug(DEBUG_BOOT, "scr_pad6 0x%x", scr_pad6);
/* read ELP_CMD */
elp_cmd = wl12xx_reg_read32(wl, ELP_CMD);
wl12xx_debug(DEBUG_BOOT, "elp_cmd 0x%x", elp_cmd);
/* set the BB calibration time to be 300 usec (PLL_CAL_TIME) */
ref_freq = scr_pad6 & 0x000000FF;
wl12xx_debug(DEBUG_BOOT, "ref_freq 0x%x", ref_freq);
wl12xx_reg_write32(wl, PLL_CAL_TIME, 0x9);
/*
* PG 1.2: set the clock buffer time to be 210 usec (CLK_BUF_TIME)
*/
wl12xx_reg_write32(wl, CLK_BUF_TIME, 0x6);
/*
* set the clock detect feature to work in the restart wu procedure
* (ELP_CFG_MODE[14]) and Select the clock source type
* (ELP_CFG_MODE[13:12])
*/
tmp = ((scr_pad6 & 0x0000FF00) << 4) | 0x00004000;
wl12xx_reg_write32(wl, ELP_CFG_MODE, tmp);
/* PG 1.2: enable the BB PLL fix. Enable the PLL_LIMP_CLK_EN_CMD */
elp_cmd |= 0x00000040;
wl12xx_reg_write32(wl, ELP_CMD, elp_cmd);
/* PG 1.2: Set the BB PLL stable time to be 1000usec
* (PLL_STABLE_TIME) */
wl12xx_reg_write32(wl, CFG_PLL_SYNC_CNT, 0x20);
/* PG 1.2: read clock request time */
init_data = wl12xx_reg_read32(wl, CLK_REQ_TIME);
/*
* PG 1.2: set the clock request time to be ref_clk_settling_time -
* 1ms = 4ms
*/
if (init_data > 0x21)
tmp = init_data - 0x21;
else
tmp = 0;
wl12xx_reg_write32(wl, CLK_REQ_TIME, tmp);
/* set BB PLL configurations in RF AFE */
wl12xx_reg_write32(wl, 0x003058cc, 0x4B5);
/* set RF_AFE_REG_5 */
wl12xx_reg_write32(wl, 0x003058d4, 0x50);
/* set RF_AFE_CTRL_REG_2 */
wl12xx_reg_write32(wl, 0x00305948, 0x11c001);
/*
* change RF PLL and BB PLL divider for VCO clock and adjust VCO
* bais current(RF_AFE_REG_13)
*/
wl12xx_reg_write32(wl, 0x003058f4, 0x1e);
/* set BB PLL configurations */
tmp = LUT[ref_freq][LUT_PARAM_INTEGER_DIVIDER] | 0x00017000;
wl12xx_reg_write32(wl, 0x00305840, tmp);
/* set fractional divider according to Appendix C-BB PLL
* Calculations
*/
tmp = LUT[ref_freq][LUT_PARAM_FRACTIONAL_DIVIDER];
wl12xx_reg_write32(wl, 0x00305844, tmp);
/* set the initial data for the sigma delta */
wl12xx_reg_write32(wl, 0x00305848, 0x3039);
/*
* set the accumulator attenuation value, calibration loop1
* (alpha), calibration loop2 (beta), calibration loop3 (gamma) and
* the VCO gain
*/
tmp = (LUT[ref_freq][LUT_PARAM_ATTN_BB] << 16) |
(LUT[ref_freq][LUT_PARAM_ALPHA_BB] << 12) | 0x1;
wl12xx_reg_write32(wl, 0x00305854, tmp);
/*
* set the calibration stop time after holdoff time expires and set
* settling time HOLD_OFF_TIME_BB
*/
tmp = LUT[ref_freq][LUT_PARAM_STOP_TIME_BB] | 0x000A0000;
wl12xx_reg_write32(wl, 0x00305858, tmp);
/*
* set BB PLL Loop filter capacitor3- BB_C3[2:0] and set BB PLL
* constant leakage current to linearize PFD to 0uA -
* BB_ILOOPF[7:3]
*/
tmp = LUT[ref_freq][LUT_PARAM_BB_PLL_LOOP_FILTER] | 0x00000030;
wl12xx_reg_write32(wl, 0x003058f8, tmp);
/*
* set regulator output voltage for n divider to
* 1.35-BB_REFDIV[1:0], set charge pump current- BB_CPGAIN[4:2],
* set BB PLL Loop filter capacitor2- BB_C2[7:5], set gain of BB
* PLL auto-call to normal mode- BB_CALGAIN_3DB[8]
*/
wl12xx_reg_write32(wl, 0x003058f0, 0x29);
/* enable restart wakeup sequence (ELP_CMD[0]) */
wl12xx_reg_write32(wl, ELP_CMD, elp_cmd | 0x1);
/* restart sequence completed */
udelay(2000);
return 0;
}
int wl12xx_boot_run_firmware(struct wl12xx *wl)
{
int loop, ret;
u32 chip_id, interrupt;
wl->chip.op_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
chip_id = wl12xx_reg_read32(wl, CHIP_ID_B);
wl12xx_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
if (chip_id != wl->chip.id) {
wl12xx_error("chip id doesn't match after firmware boot");
return -EIO;
}
/* wait for init to complete */
loop = 0;
while (loop++ < INIT_LOOP) {
udelay(INIT_LOOP_DELAY);
interrupt = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
if (interrupt == 0xffffffff) {
wl12xx_error("error reading hardware complete "
"init indication");
return -EIO;
}
/* check that ACX_INTR_INIT_COMPLETE is enabled */
else if (interrupt & wl->chip.intr_init_complete) {
wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
wl->chip.intr_init_complete);
break;
}
}
if (loop >= INIT_LOOP) {
wl12xx_error("timeout waiting for the hardware to "
"complete initialization");
return -EIO;
}
/* get hardware config command mail box */
wl->cmd_box_addr = wl12xx_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
/* get hardware config event mail box */
wl->event_box_addr = wl12xx_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
/* set the working partition to its "running" mode offset */
wl12xx_set_partition(wl,
wl->chip.p_table[PART_WORK].mem.start,
wl->chip.p_table[PART_WORK].mem.size,
wl->chip.p_table[PART_WORK].reg.start,
wl->chip.p_table[PART_WORK].reg.size);
wl12xx_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
wl->cmd_box_addr, wl->event_box_addr);
/*
* in case of full asynchronous mode the firmware event must be
* ready to receive event from the command mailbox
*/
/* enable gpio interrupts */
wl12xx_boot_enable_interrupts(wl);
wl->chip.op_target_enable_interrupts(wl);
/* unmask all mbox events */
wl->event_mask = 0xffffffff;
ret = wl12xx_event_unmask(wl);
if (ret < 0) {
wl12xx_error("EVENT mask setting failed");
return ret;
}
wl12xx_event_mbox_config(wl);
/* firmware startup completed */
return 0;
}
Reference in New Issue View Git Blame Copy Permalink