..
Kconfig
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
Makefile
ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
2014-05-04 15:28:59 -04:00
acard-ahci.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ahci.c
ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
2014-07-18 18:00:50 -04:00
ahci.h
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
2014-07-08 11:46:05 -04:00
ahci_da850.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_imx.c
ata: ahci_imx: warn when disabling ahci link
2014-06-24 17:58:14 -04:00
ahci_mvebu.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_platform.c
ahci: disable ncq feature for hisilicon sata
2014-06-24 16:54:23 -04:00
ahci_st.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_sunxi.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_xgene.c
ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
2014-07-08 11:46:05 -04:00
ata_generic.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ata_piix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
libahci.c
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
2014-07-08 11:46:05 -04:00
libahci_platform.c
libahci_platform: Fail when PHY required but PHY support disabled
2014-06-17 12:10:59 -04:00
libata-acpi.c
ACPI and power management updates for 3.15-rc1
2014-04-01 12:48:54 -07:00
libata-core.c
libata: support the ata host which implements a queue depth less than 32
2014-07-14 12:38:20 -04:00
libata-eh.c
libata: EH should handle AMNF error condition as a media error
2014-07-15 11:13:57 -04:00
libata-pmp.c
ata: enable quirk from jmicron JMB350 for JMB394
2014-01-31 07:05:44 -05:00
libata-scsi.c
ata: SATL compliance for Inquiry Product Revision
2014-05-02 10:57:47 -04:00
libata-sff.c
libata-sff: remove dead code
2014-05-04 15:01:42 -04:00
libata-transport.c
libata: Fix display of sata speed
2013-10-27 07:43:25 -04:00
libata-transport.h
[libata] Add ATA transport class
2010-10-21 20:21:03 -04:00
libata-zpodd.c
libata: zpodd: eliminate odd_can_poweroff
2014-03-14 11:23:47 -04:00
libata.h
ATA / ACPI: remove power dependent device handling
2013-10-17 15:38:53 +02:00
pata_acpi.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ali.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_amd.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_arasan_cf.c
pata_arasan_cf: fix ata_host_activate() failure handling
2014-04-14 13:50:03 -04:00
pata_artop.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_at32.c
ata: use dev_get_platdata()
2013-07-30 08:59:24 -04:00
pata_at91.c
pata_at91: fix ata_host_activate() failure handling
2014-04-02 13:17:31 -04:00
pata_atiixp.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_atp867x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_bf54x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd64x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd640.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5520.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5530.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5535.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5536.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cypress.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_efar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ep93xx.c
drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()
2014-07-17 08:36:13 -04:00
pata_hpt3x2n.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt3x3.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_hpt37x.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt366.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_icside.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_imx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_isapnp.c
pata_isapnp: Don't use invalid I/O ports
2013-10-07 15:17:32 -04:00
pata_it821x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_it8213.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
DMA-API: others: use dma_set_coherent_mask()
2013-10-31 14:49:07 +00:00
pata_jmicron.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_legacy.c
pata_legacy: Remove dead code
2014-03-11 08:30:53 -04:00
pata_macio.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_marvell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpc52xx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_netcell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ninja32.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87410.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87415.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_octeon_cf.c
pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-04-14 13:33:28 -04:00
pata_of_platform.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_oldpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_opti.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_optidma.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_palmld.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_pcmcia.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_pdc2027x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_piccolo.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_platform.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pxa.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_radisys.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_rdc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rz1000.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_samsung_cf.c
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
pata_sc1200.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_scc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sch.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_serverworks.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sil680.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sl82c105.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_triflex.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pdc_adma.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_fsl.c
sata_fsl: remove check for CONFIG_MPC8315_DS
2014-05-21 15:36:22 -04:00
sata_highbank.c
ata: sata_highbank: remove superfluous cast
2014-03-26 11:42:01 -04:00
sata_inic162x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_mv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_nv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_promise.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_promise.h
libata annotations and fixes
2008-01-23 05:24:15 -05:00
sata_qstor.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_rcar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil24.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_svw.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_sx4.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_uli.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_vsc.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sis.h
…